CS Paper Radar

Computational Power of Clifford and Ising Quantum Computers

Sawyer Dobson, Zhenghan Wang

cs.CC quant-phmath.QA ·submitted 2026-11-09 23:19 UTC · v1
theory

Abstract

We extend the efficient classical simulation of Ising quantum computers from braidings to measurements. We investigate several different definitions of efficient Clifford quantum computation by varying the power of the circuit generator. In case the circuit generator can see the entire input, we give a detailed proof that efficient simulation of classical computation would imply the separation of complexity classes $\mathbf{P}$ and $\mathbf{PSPACE}$. If the circuit generator sees only the input length, we prove that Clifford quantum computers decide what we call affine languages.

Comment
52 pages, 26 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Computational Complexity of Clifford Template Compilation: Are Quantum Computers Useful for Compiling Quantum Circuits?

cs.CC quant-ph ·2026-09-28 ·Keisuke Fujii
similarity 0.70
Abstract · 12 pages, 2 figures, 1 table

A Clifford template is a finite ordered family of repeatable Clifford operations, and an instantiation specifies how many times each operation is applied. The Clifford template compilation problem asks how to choose these repetition numbers so that the template realizes a target transformation of Pauli operators. This problem arises, for example, when searching for logical operations in quantum error correction using only Clifford operations permitted by physical or fault-tolerance constraints. Although forward Clifford dynamics is efficiently classically simulable, this inverse problem has sharp complexity transitions. For commuting templates with unrestricted integer exponents, feasibility lies in $\mathrm{NP}\cap\mathrm{BQP}$ and a constructive quantum algorithm returns a particular solution together with the full exponent-relation lattice; already at $k=1$, recovering the repetition number contains finite-field discrete logarithm over $\mathbb{F}_{2^r}^{\times}$. In general, restricting every exponent to $\{0,1\}$ removes the Abelian-group closure and makes feasibility NP-complete for variable $k$, even for exactly commuting CNOT-only operations and X-type Paulis. For commuting self-inverse Clifford actions, both binary feasibility and recovery of one solution are classically polynomial-time solvable, but imposing a bound on the total repetition count is NP-complete, even for CNOT-only operations. These results reveal a rich complexity landscape within Clifford template compilation, spanning classically tractable cases, problems admitting quantum polynomial-time algorithms, and NP-complete variants.

0.36

Clifford synthesis is NP-complete

cs.CC quant-ph ·2026-10-29 ·Søren Fuglede Jørgensen
similarity 0.68
Abstract

We show that the problem of synthesizing a quantum circuit for a given Clifford operator using at most a specified amount of resources is NP-complete for several resource models of practical interest. Specifically, we study synthesis of a given Clifford operator using single-qubit Clifford gates and two-qubit Clifford gates, with full qubit connectivity and no additional ancilla qubits. With single-qubit gates free and CNOT as the only two-qubit gate, we show that deciding whether a given target admits an implementation using at most a specified number of CNOT gates is NP-complete, and we show that the problem remains NP-complete when any two-qubit Clifford gate is allowed and the budget counts all such gates. Moreover, we show that both results continue to hold when SWAP gates may be inserted for free, and when single-qubit gates are also considered part of the budget. In each case, we build on recent work by Li and Guan and show that there are polynomial-time reductions from Hamiltonian path in grid graphs to these decision problems, using a number of qubits quadratic in the number of grid vertices.

0.05

Complexity separations for optimal matchgate-Clifford synthesis

cs.CC quant-ph ·2026-10-05 ·Berta Casas, Diego García-Martín, Yuxuan Zhang
benchmarktheory similarity 0.66
Abstract · 20 + 21 pages, 4 + 1 figures

Clifford and matchgate circuits are canonical families of classically simulable quantum circuits. Their intersection, the matchgate-Clifford group, plays an important role in randomized fermionic protocols and in matchgate synthesis. Its adjoint action is isomorphic to the group of unit-determinant signed permutations of $2n$ Majorana modes, and we study optimal exact synthesis in this group. That is, given a target unitary and a gate set, output an $n$-qubit circuit implementing the target using the fewest operations. We show that the complexity of this problem strongly depends on the gate set. In particular, we study gate sets consisting of Majorana braids with different connectivity graphs. For path and complete graphs, we prove that the problem is classically solvable in $\mathcal{O}\left(n^2\right)$ time, and we provide explicit gate-optimal compilers. In addition, we prove that when the connectivity graph is a tree, the decision version of the optimal synthesis problem becomes NP-complete. Finally, we benchmark our optimal compiler on chains of up to $n=80$ qubits against those of \texttt{Qiskit} and \texttt{Tket}, obtaining circuits with constant factor improvements $\times2.57$ and $\times2.28$ in the total number of gates, respectively.

0.37

ABSTRACTS: Amsterdam Benchmark Suite for the Time and Resource Analysis of Clifford+T Simulators

cs.PF quant-ph ·2026-08-25 ·Matthew Sutcliffe, John van de Wetering
benchmarkcode/data similarity 0.66
Abstract · This manuscript corresponds to version 0.1 of the ABSTRACTS repository: https://github.com/mjsutcliffe99/ABSTRACTS

Recent years have seen a rapid growth in literature presenting new methods for simulating non-Clifford quantum circuits with classical hardware. These methods span a range of approaches, including stabiliser decomposition and tensor contraction techniques, varying in efficiency depending on circuit class, depth, non-Clifford gate count, and other metrics. A notable limitation of this literature is the lack of a standardised approach to benchmarking, with each new paper outlining its own specification, simulating its own set of circuits on the authors' own hardware. This paper seeks to address this issue by presenting a standardised and canonical benchmark suite and infrastructure for quantifying the efficiency of non-Clifford classical simulators, with a consistent dataset of circuits and providing consistent (virtual) hardware, thereby enabling a fair comparison of results.

0.35

Pauli Gadget Synthesis for Gatesets with Arbitrary Even Arity Clifford Gates

cs.ET ·2026-11-04 ·Leo Becker, Arianne Meijer - van de Griend
published similarity 0.65
Abstract · In Proceedings QPL 2026, arXiv:2611.04069

We propose an algorithm that can synthesize circuits to gate sets consisting of a 2n-arity Clifford gate and arbitrary single qubit rotations. To do this, we represent the circuit as a sequence of Pauli gadgets and jointly synthesize them by placing the multi-qubit Clifford in the synthesized circuit and pushing its adjoint through the remaining gadgets such that some qubits are disconnected from some gadgets. The pushed gadgets are collected in a Clifford tableau, which is decomposed afterwards. With the help of our algorithm we run experiments where we synthesize circuits to varying sizes of target multi-qubit gates. These experiments indicate that increases in gate size can lead to smaller output circuits, and that different connectivity constraints have meaningful differences in how higher arity gates effect the circuit sized.

0.29

Factorized Boolean representations for efficient quantum synthesis

cs.LO quant-ph ·2026-08-27 ·Mehul Shah, Robert Fiszer, Marek Perkowski
code/data similarity 0.65
Abstract · 20 pages, 4 figures. Code and data: https://github.com/mehulshah225/Research_Project

Quantum algorithms promise advantages beyond classical reach, but running them on error-corrected hardware requires translating Boolean specifications into reversible circuits, and the resources that translation demands determine what is executable. Established methods minimize a Boolean expression and map it to a circuit, assuming the minimized form is best. Here we show that minimized expressions retain algebraic structure minimization cannot reach, arising from containment and complementary-polarity relationships among their terms, and that extracting it yields circuits cheaper to execute despite having more operations. The decisive quantity is not a circuit's operation count but the control count of its widest operation, a superlinear cost; extracting shared factors trades a few wide operations for many narrow ones and reduces qubit count. Across benchmarks and oracles from quantum search and factoring algorithms, at the representation level the transformation never increases either cost measure, a guarantee from its construction. Translation to an executable circuit returns part of that advantage, since auxiliary lines must be uncomputed, yet the factorized circuit still left a leading circuit-level optimizer reaching lower final counts, and faster, than unaided. The representation of a computation is therefore itself a resource, optimizable before compilation and distinct from both logic minimization and circuit-level optimization.

0.25

Proving olympiad geometry theorems on a superconducting quantum processor

cs.AI quant-ph ·2026-09-13 ·Ning Wang, Zheng-Zhi Sun, Zhengyi Cui, Yiren Zou, Aosai Zhang +30 more
theory similarity 0.64
Abstract

Automated theorem proving seeks to use computational systems to prove or disprove mathematical and logical statements [1, 2]. It underpins a wide range of applications, and enhancing theorem-proving capabilities remains a central objective in artificial intelligence [3]. Although recent neuro-symbolic systems have achieved remarkable progress [4-7], their operation is ultimately constrained by classical computational architectures. Quantum computing [8], by contrast, enables information encoding and coherent parallelism beyond classical limits [9-14], raising the possibility of accelerating structured symbolic deduction [15]. Here we report the experimental realization of automated geometry theorem proving on a fully programmable superconducting quantum processor. We develop two complementary quantum proving frameworks. The first implements Wu's algebraic elimination method using quantum pseudo-division, with multivariate polynomials represented in superposition states, enabling quantum algebraic theorem proving. The second implements the full-angle method as backward symbolic reasoning through a hybrid quantum strategy-guided architecture, demonstrating a general route toward quantum symbolic proof search. As illustrative examples, we prove two theorems on a superconducting quantum processor: the perpendicularity of the diagonals of a square and a 1978 International Mathematical Olympiad geometry problem. Our results establish, at the experimental level, automated logical reasoning as a viable task for near-term quantum processors and provide a concrete pathway toward quantum-enhanced symbolic intelligence.

0.15

A Dichotomy for Exact Quantum Circuit Amplitudes

cs.CC ·2026-11-17 ·Chenghua Liu, Boning Meng
similarity 0.64
Abstract

We classify the complexity of exactly computing computational-basis amplitudes for circuits over any fixed finite library of unitary qubit gates, with each gate allowed to act on any ordered tuple of distinct wires. Exact evaluation is polynomial-time computable if all gates permute the computational basis up to phases, all preserve product states, or all become Clifford under a common diagonal one-qubit unitary change of basis on every wire. For every other library, the problem is $\#\mathrm P$-hard under polynomial-time Turing reductions. Our proof connects circuit amplitudes to the Boolean Holant classification of tensor contractions on arbitrary graphs. For an algebraic library containing a nonmonomial gate and an entangling gate, we show how to simulate the joint use of a symmetric maximally entangled state and its adjoint at polynomial cost, using only amplitude queries over the original library. This lets us evaluate unrestricted contractions of the resulting gate and boundary tensors. Unitarity and the computational-basis boundaries then restrict the tractable cases to the three forms above. Algebraic specialization extends the dichotomy to arbitrary fixed complex gate entries under a symbolic exact-output convention.

0.30