CS Paper Radar

Plumbline: When the Loss Lies, Validating LLM Training Correctly

Ruochen Wen, Hongyang Wang, Siwei Li, Wenbo Chen, Xian Li, Jingguo Liu, Leo Fan, Yiming Yan, Qian Qu, Zheshen Wang, Benoit Dumoulin

cs.DC cs.LG ·submitted 2026-11-10 00:13 UTC · v1

Abstract

Correctness is a prerequisite for training large language models (LLMs) at scale, yet it is hard to ensure: a fault can sit in any part of a run, and how it shows differs across frameworks and the libraries they depend on. Some failures are loud and some are silent, and both take time to detect and trace. A single fault can waste a long run: the run crashes late, or the model scores lower only at the final evaluation. We present Plumbline, a correctness validation system for LLM training, used in production at Amazon. Plumbline checks each part of the training lifecycle, from the data a run trains on to the model it serves, down to the new layers each model brings and up to whole runs. Its diagnosis reuses these checks to trace failures to their root causes. Both rest on a systematic correctness methodology designed to carry across models and frameworks. Plumbline supports two agentic use cases: Day-0 onboarding, which validates the training of a newly released model before teams rely on it, and root-cause tracing of training failures. Across 3 frameworks and 5 models, it found 61 problems, 32 of them silent. Of these, 42 are fixed or reported upstream, 8 of them first raised by us. We further group the 61 into seven failure patterns that show where training breaks, and report how problems recur across frameworks and models.

Comment
16 pages, 6 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Ecdysis: Efficient and Effective Training of Runtime Harnesses for LLM Agents

cs.SE cs.AI ·2026-09-10 ·Ruiqing Yue, Yu Cui, Zhuoyu Sun, Sicheng Pan, Xianhong Xue +9 more
highly cited similarity 0.68
Abstract

Self-evolving runtime harnesses can substantially improve the capabilities of large language model (LLM) agents and provide a promising paradigm for optimizing agent execution. Existing failure-driven approaches often treat observed agent failures as direct evidence for harness modification. A key challenge in failure-driven harness evolution is that observed failures can reflect either limitations of the underlying model or systematic deficiencies of the harness. Directly optimizing against individual failures can therefore induce model-specific accommodation and impair generalization across tasks and models. We study whether failure evidence accumulated across task instances can provide a more reliable signal for harness training. Our key insight is that failures recurring across distinct tasks provide stronger inductive evidence for systematic harness deficiencies than isolated failures. Based on this insight, we propose Ecdysis, which aggregates failure evidence across task instances before promoting recurring failure patterns into persistent harness evolution, biasing evolution toward repairs that are more likely to generalize beyond individual model behaviors. Ecdysis further employs collaborative failure analysis to refine modification specifications, trading additional evolution-time reasoning for improved modification quality. Across multiple LLMs and benchmarks, Ecdysis improves the reasoning accuracy of evolved harnesses by 18.56% over existing harness evolution while achieving up to 1.84x faster harness training. Ecdysis also enables more data-efficient training. Fine-grained analysis shows that Ecdysis reduces model-specific accommodation during evolution, while the resulting harnesses exhibit stronger cross-LLM generalization and lower inference-time token consumption.

0.33

Loud Failures, Quiet Failures: Fault Detection and Recovery in Tool-Using Language Model Agents

cs.AI ·2026-10-07 ·Obada Kraishan
benchmark similarity 0.68
Abstract

Tool-using agents are usually scored on whether they finish a task while the tools work. Deployments are less forgiving: services time out, endpoints disappear, parameter names change, and results come back well formed but wrong. Prior work has shown that language models over-trust tool outputs that fail silently; we ask how that over-trust plays out across the stages of failure handling in multi-turn agents. Wrapping the executable environments of an established function-calling benchmark in a fault-injection layer, we inject one of four typed faults at a controlled point in the trajectory and record whether the agent notices, changes plan, recovers the task, or repeats itself. Six models from three families, half of them reasoning variants, ran 1,920 trials over 24 multi-step tasks. Agents treat a failure as a problem in 91.3% of trials when the tool returns an explicit error, but in 58.8% of trials when it returns a plausible wrong value, against a 26.8% rate of reporting problems when nothing was wrong. Reasoning models are not better placed: paired against instruct siblings, they notice less (-9.3 points, p < .001) and change plan more (+10.4 points, p < .001), and recovery is unchanged (p = .512). Because agents are stochastic, two fault-free runs of the same task end in the same state only 63.3% of the time; against that baseline, only a missing tool clearly lowers recovery (39.9%), while timeouts, schema drift, and corruption stay within run-to-run variation. After a fault, agents return to the same tool three or more times in a row in up to 22.2% of trials, though strictly identical repeats are rare. A prompt line asking the agent to check each result did not move detection. Agents respond to the error channel rather than to the content of what a tool returns, so failures that stay inside the expected format pass through.

0.43

Agent Error Dataset: Scaling 50,000 Error--Diagnosis Pairs for Failure Analysis and Error-Aware Post-Training

cs.AI cs.CL ·2026-09-30 ·Kunlun Zhu, Xuyan Ye, Yibo Li, Cheng Qian, Beibin Li +1 more
dataset similarity 0.67
Abstract

An unsuccessful LLM agent rollout contains more information than its final reward: the observations available to the agent, the actions it chose, and the environment's responses. Reusing this experience for learning requires identifying a decision to revise and testing a concrete alternative. We introduce the Agent Error Dataset (AED), comprising 50,228 error-diagnosis pairs from 9,961 source tasks across 33 environments, 19 harness families, and 23 policy models in text-based agent systems. We retain source traces and execution metadata to support cross-setting failure analysis and re-diagnosis without repeating the original rollout. Our five-stage Agentic Error-to-Training (AET) pipeline collects natural failures, generates diagnoses and proposed corrections, and checks them against recorded evidence. Where replay is supported, we compare corrections with original-action retries from the same checkpoint under matched execution settings. We then construct separate training views for diagnosis and actor recovery. Across 3,062 matched replay pairs, first-proposal corrections raise verifier pass rates from 18.4% to 51.1%, a gain of 32.7 percentage points. Using a separately frozen diagnosis release, full-diagnosis fine-tuning on 1,656 source tasks raises Qwen3-8B's exact-step agreement with internal teacher labels from 47.2% to 63.6%, averaged over three seeds on a 943-case holdout. The strongest prompted reference in this comparison scores 54.7%, and mean agreement improves at each of four increasing training-set sizes. In a single-seed comparison of actor-training recipes, action-only repair training scores 6.67 percentage points higher on WebShop-lite than success-only training.

0.43

Why Does Structured Output Fail? An Empirical Study of Prompt-Enforced Pydantic Schemas Across Nine LLMs

cs.SE cs.CLcs.LG ·2026-10-24 ·Amit Verma
similarity 0.65
Abstract · 36 pages, 2 figures, 16 tables. Under review at Empirical Software Engineering. Artifact: https://doi.org/10.5281/zenodo.23586834

Pipelines that require structured outputs from hosted language models often specify a Pydantic schema in the prompt, validate the response, and retry when validation fails. Although native structured-output modes provide an alternative, application-side validation remains important for enforcing custom constraints. Yet pipeline reliability is often summarized by a single validity rate, which obscures why outputs fail and which interventions may help. We introduce a fine-grained taxonomy of schema-conformance failures and a deterministic classifier that assigns failure categories from model responses and Pydantic validation errors. We apply this framework to 3,997 generation attempts across nine OpenAI and Anthropic model/API configurations, using questions from HotpotQA and FinanceBench. Our results show that similar validity rates can mask different failure patterns, and that dominant failure categories vary with schema constraints and task. Markdown-fenced JSON is the most common failure: among 681 fenced failures, only 48.0% pass validation after fence removal, while the remainder conceal additional violations, predominantly field-length violations. In an exploratory prompt ablation, variants that suppress fences appear to shift failures toward length violations, but the shift is consistent with exposing violations that were already present, illustrating how aggregate validity rates can obscure changes in failure composition. We derive four engineering practices for validator, schema, retry and evaluation design, three supported by our data and one, on retry feedback, proposed but not tested, and release the classifier, completions, and annotations.

0.29

The Calls are Coming from Inside the Model: Investigating Probe-based Detection of Tool-Calling Errors in LLMs

cs.LG cs.CL ·2026-08-27 ·Eric Yeats, Brendan Kennedy, Loc Truong, John Buckheit, Jung Lee +3 more
benchmark similarity 0.64
Abstract · 4 main pages, 8 pages of references and appendices

The hidden states of large language models (LLMs) are known to capture rich information relating to model knowledge and behavior that can be hard to extract from examination of input and output alone. As LLM-based systems increasingly interface with the external world, one area of concern is detecting incorrect or improper use of tools. Motivated by this, we study the effectiveness of using linear probes to detect incorrect tool-calls, measuring probe efficacy across 18 tool-calling LLMs evaluated on the Berkeley Function Calling Leaderboard. Overall, we find that probing is an effective means to catch a range of different tool-calling errors, including errors arising from using an argument that has the wrong value but the correct type, which might not be recorded by standard logging frameworks. Important factors in success include model size, probing layer, and model post-training type. We also show that probes are capable of generalizing to novel types of errors, which is critical in real world deployments.

0.36

Same Error, Different Recovery: How Delivery Changes LLM Agent Behavior

cs.AI cs.AR ·2026-11-08 ·Sunghyeun Woo, Javier Conde, Pedro Reviriego
similarity 0.64
Abstract

A tool-using language model must decide whether to retry a failed call, correct it, or stop and tell the user. The error text alone may not be enough: the same feedback can lead to different actions depending on where it appears in the conversation. We isolate this delivery problem by varying placement, guidance, retained history and turn structure. Two studies with plans fixed before data collection, across 13 open models from 3B to 70B parameters, compare the next action and subsequent task completion, with exact deterministic reruns. A new user turn that retains the failed exchange avoids the severe stopping failure observed in Llama models when that exchange is removed. It is non-inferior to history rewriting in pooled synthetic comparisons, but is not best for every model. We implement this form as an opt-in recovery layer within a deterministic inference engine and evaluate it on public benchmarks and a coding agent. On ToolMaze, it raises success on explicit errors by 14.2 points with 7-8B models and 10.5 points with 32-70B models; Loud/Quiet, 24 multi-turn tasks with visible failures and silent corruption, scored by final-state agreement, shows no measurable gain. A client given the exact fault kind performs better still. The findings support delivery as a distinct factor in recovery, not an engine-exclusive solution or a universal retry policy.

0.11

Robust Failure, Conservative Repair: Textual Knowledge Distillation from Cross-Model Failures

cs.AI ·2026-09-21 ·Andrew Ren, Haokun Liu, Chenhao Tan
top venue similarity 0.64
Abstract · 16 pages, 2 figures. Accepted to EMNLP 2026 (Main track)

Failure-based textual knowledge distillation aims to discover gaps in a model's knowledge by examining its task errors. The distilled knowledge can be useful for the reasoning of both this model ("source model") and other models. However, this transfer of knowledge may not be stable. We define a rule atom to be a standalone rule injected into a model's textual input at inference time. A rule atom can encode transferable task knowledge or model-specific reasoning patches that can confuse other models. Also, the injected rule atoms can be misapplied to unrelated cases, causing the model to incorrectly flip its answer based on irrelevant information. Building on a pipeline that distills training examples into task-specific cheat sheets that aid model reasoning, we examine when failure-derived rules can improve these cheat sheets. Our early experiment shows rule distillation from a single model's failures underperforms the baseline cheat sheet on non-source model families. This motivates Robust Failure, Conservative Repair (RFCR), a textual distillation procedure that derives rules from failures shared across models, sharpens their application boundaries using boundary cases, and abstains when no useful rule is found. On a 400-item BIG-Bench Hard task set, RFCR improves the baseline cheat sheets from 68.50% to 71.25% (+2.75 pp; 95% CI [+1.25,+4.50]) without performance degradation on previously correct cases. Ablations and cross-model diagnostics support that accuracy gains come from both new knowledge injection and strict rule-application control.

0.41

ArrivalBench: Agent-Generated Data Pipelines Are Correct Once and Wrong Under Time

cs.LG cs.DB ·2026-10-01 ·Pranay Kothari
published similarity 0.64
Abstract · Accepted as a poster at the NeurIPS 2026 Workshop "Who Verifies the Agents?". 20 pages

Benchmarks for agent-generated data work grade a pipeline by running it once against a fixed snapshot. ArrivalBench instead re-executes the pipeline an agent leaves behind under adversarial but replayable delivery schedules (late, duplicated, out-of-order and retried records) and requires its final state to equal a batch recomputation of the complete log. Because the oracle recomputes rather than classifies, a wrong table and a crash are distinct verdicts: a crash is visible to monitoring a team already runs, and a wrong table is not. On 40 tasks we built, our reimplementation of single-execution grading certifies 86-100% of the pipelines eleven models produce; re-executing the same artifacts finds 7.0-79.2% of the certified ones silently wrong. The gap is not produced by the repair loop: within the same model and task, pipelines repaired against the snapshot test fail replay about as often as those that passed it first time. In every model, idempotency hazards fail more often than ordering hazards. Separating a wrong answer from a crash also changes how interventions read: a hazard warning cuts one model's silent failure from 48.2% to 10.5% while raising its crash rate from 9.0% to 37.0%, so all-in failure moves only from 51.0% to 44.0%. All eleven arms were independently re-run, and rates moved by at most 5.9 points.

0.33