CS Paper Radar

GEMOR-GS: Global Extrinsic-calibration-refined Mapping and Online Relocalization for 3D Gaussian-Splatting SLAM

Yuchen Yang, Ming Ding, Xinyu Wu, Hesheng Wang

cs.RO cs.CV ·submitted 2026-11-10 03:51 UTC · v1

Abstract

Photorealistic and metrically consistent world representations are a primary requirement for LiDAR--inertial--visual SLAM systems that serve robots over continuous operation. 3D Gaussian splatting makes such representations attainable by supplying an explicit, renderable, and queryable scene model. We present GEMOR-GS (Global Extrinsic-calibration-refined Mapping and Online Relocalization for 3D Gaussian-Splatting SLAM) to make the Gaussian map geometrically accurate, globally refined, and re-enterable, providing a better appearance for robot perception and decision-making. To improve the 3DGS map, the LiDAR--camera extrinsic is first estimated offline by direct-method alignment over dedicated calibration segments and reused by all following online and offline processes. Under the calibrated geometry, keyframe poses and Gaussian parameters are refined alternately under a gated differentiable-rendering and LiDAR--projection objective. The final global reconstruction is then rebuilt from the refined keyframe schema with all online constraints lifted. For the robot SLAM lifecycle, the method recovers the pose from the 3DGS map after tracking loss through an XFeat bypass map, RANSAC-PnP coarse localization, and Gaussian RGB-D warp refinement. Experiments on one self-collected and five public sequences quantify each element: the offline reconstruction wins all paired keyframes against the online map by 14.3--19.9 dB, improves PSNR by approximately 9 dB over Gaussian-LIC2, and achieves 86--100% held-out relocalization success tied to extrinsic quality. The results show that GEMOR-GS improves the geometric accuracy, appearance fidelity, and re-enterability of the 3DGS map, serving as a dependable robot world model for SLAM and downstream tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

Geometry-Aware Online Mapping for 3D Gaussian Splatting SLAM

cs.RO ·2026-08-14 ·Thai Luu, Quan Tran, Hieu Phan, Tuan Dang
top venuecode/data similarity 0.78
Abstract

Recent 3D Gaussian Splatting (3DGS) has enabled efficient photorealistic view synthesis and is rapidly being adopted in simultaneous localization and mapping (SLAM) systems for online mapping. In these systems, a Gaussian map must be expanded and refined incrementally while tracking runs in real time, so initialization and density control directly determine where limited computation and iterations are spent. This contrasts with offline 3DGS reconstruction, where such heuristics can be amortized over long optimization schedules. However, most 3DGS-SLAM pipelines inherit initialization and density-control heuristics from offline reconstruction, which can become brittle under the strict per-keyframe optimization budgets and incremental map growth of online SLAM. In this work, we revisit these heuristics in a decoupled 3DGS-SLAM setting and propose three geometry-aware methods that operate in the mapping thread: transmittance-preserving densification, camera-aware scale initialization from depth and intrinsics, and error-guided densification that focuses new primitives on high-residual regions. Our results show consistent improvements in rendering quality with negligible overhead, highlighting the coupling between photometric residuals and pose uncertainty in online SLAM. We will open-source our code to the community to foster growth and validate reproducibility.

0.52

VGGT-GS SLAM: Uncalibrated Monocular Gaussian Splatting SLAM with Feed-Forward Priors

cs.CV ·2026-09-17 ·Yuhang Han, Hao Wang, Jiaxi Cao, Xingyu Liu
similarity 0.75
Abstract · 9 pages, 4 figures

We present VGGT-GS SLAM, a monocular 3D Gaussian Splatting SLAM system designed for uncalibrated videos. Starting from feed-forward VGGT pose and depth priors, our system performs submap differentiable bundle adjustment that jointly refines camera poses and a 3D Gaussian map, while optimizing submap-shared intrinsics and radial--tangential distortion through analytic calibration Jacobians. To improve global consistency, we introduce Gaussian-native alignment (GNA) for camera-anchored scale refinement between sequential submaps and verification of loop-closure candidates. Extensive experiments on standard indoor benchmarks show consistent improvements in localization accuracy and strong rendering quality under uncalibrated settings, establishing a strong baseline for uncalibrated Gaussian SLAM.

0.26

LightSplat: Real-Time High-Fidelity 3D Gaussian SLAM with Loop Closure

cs.RO cs.CV ·2026-09-07 ·Junze Bao, Ye Gao, Yiming Huang, Xiaolong Yu, Chen Dong +3 more
published similarity 0.73
Abstract · Accepted to 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)

SLAM systems based on 3D Gaussian Splatting (3DGS) have recently demonstrated promising reconstruction accuracy for dense 3D scene representations. However, current 3DGS systems struggle to meet the strict demands of real-world deployments due to severe limitations in operational performance and map adaptability. To this end, we propose LightSplat, a hybrid-representation RGB-D SLAM framework. It synergizes local sparse features for robust and fast tracking with a dual-thread backend that progressively constructs dense Gaussian submaps. Crucially, we enable online loop closure through feature-accelerated 3DGS registration, refining overall map consistency through pose graph optimization. Ultimately, LightSplat achieves the online reconstruction of high-fidelity Gaussian map. Extensive experiments on multiple datasets and real-world robotic platform demonstrate that our method achieves near state-of-the-art reconstruction quality and the capability to accommodate practical camera motions, maintaining an average framerate of 8 FPS. Overall, LightSplat provides an efficient and robust foundation for deploying high-fidelity 3DGS in real-world environments.

0.30

PanoGS-SLAM: Panoramic 3D Gaussian Splatting SLAM

cs.CV ·2026-09-15 ·Yongqi Mao, Hao Shi, Yufan Zhang, Zhonghua Yi, Xiangfei Guo +1 more
code/data similarity 0.73
Abstract

Real-time dense SLAM is a core capability for robotics applications that require robust localization and high- quality mapping in dynamic or fast-changing environments. Recent 3D Gaussian Splatting (3DGS)-based SLAM methods have shown promising performance, but most are designed for narrow-FoV pinhole cameras, where limited angular coverage weakens pose observability and often leads to unstable photo- metric optimization under rapid motion and large viewpoint changes. We present PanoGS-SLAM, the first panoramic dense SLAM system built on 3D Gaussian Splatting. Our method per- forms differentiable rendering and pose optimization directly in the spherical domain, enabling omnidirectional photometric constraints for more stable tracking. To improve geometric consistency and robustness, we introduce (1) a sphere-consistent photometric loss that compensates for the area distortion of equirectangular projection, and (2) a depth-guided Gaussian initialization strategy that stabilizes incremental mapping in newly observed regions. Extensive experiments on both real and synthetic panoramic benchmarks (PALVIO and SynPano) show that PanoGS-SLAM consistently outperforms geometric and GS-based baselines in tracking accuracy and rendering quality, while achieving fast front-end convergence and real-time perfor- mance. In addition, controlled field-of-view experiments reveal a clear monotonic improvement in optimization conditioning and convergence stability as angular coverage increases, high- lighting the fundamental role of sensing geometry in shaping the optimization landscape of differentiable Gaussian-based SLAM. The source code will be made publicly available.

0.32

Dual Covariance Gaussian Splatting SLAM: Decoupling Rendering and Registration for Robust Real-Time Tracking

cs.RO cs.CV ·2026-09-22 ·Edward Beng Wai Tan, Siew-Kei Lam
similarity 0.72
Abstract

ICP-based 3D Gaussian Splatting (3DGS) SLAM tracks in real time by registering incoming frames against map Gaussians, using each primitive's covariance for both rendering and registration. These two uses place conflicting demands on one covariance. The mapper shapes it to minimize photometric error, often flattening it against surfaces, while robust registration typically benefits from measurement uncertainty. We propose a dual-covariance parameterization. Each Gaussian keeps a single mean but holds two covariances: a rendering covariance optimized by the mapper, and a tracking covariance derived from an RGB-D sensor noise model. We further use the tracking covariances as Gaussian anchors for image corners, providing constraints in directions where depth geometry is weak. We evaluate on TUM RGB-D, ScanNet, Replica, and two outdoor sequences recorded with a RealSense D435i on wheeled and handheld platforms. We achieve robust tracking performance across multiple scenes and reduced odometry drift, while tracking at $\sim$ 60 FPS.

0.11

GOFusion: Real-Time Gaussian-Occupancy Submap Fusion for Fisher-Informed Autonomous Robot Navigation

cs.RO ·2026-10-18 ·Boxin Bu, Simon Boche, Haoming Zhang, Jaehyung Jung, Jiaxin Wei +4 more
code/data similarity 0.72
Abstract · 8 pages, 7 figures, 4 tables. Paper under review

In this letter, we present GOFusion, a real-time visual mapping system for autonomous robot navigation that anchors Gaussian primitives to local occupancy maps, providing both spatial awareness for path planning and high-fidelity appearance that enables information-driven robot navigation. GOFusion builds 3D Gaussian maps from pose estimates and local occupancy maps obtained via visual-inertial SLAM and enables pose corrections to maintain both geometric and visual consistency. Furthermore, it restricts the 3D Gaussian Splatting optimization to active submaps to bound GPU memory usage. Building on the appearance-rich Gaussian map, we introduce a rasterizer-integrated Fisher approximation that quantifies per-primitive sensitivity online, serving as an information-driven heuristic for Gaussian pruning and next-best-view planning. We evaluate GOFusion on public datasets and in real-world drone flights. It not only outperforms several baselines in mapping quality, but also achieves real-time, high-fidelity and uncertainty-aware mapping at scale. Finally, we demonstrate fully autonomous drone exploration for Gaussian map refinement using the proposed Fisher-informed heuristic. Code is available at https://github.com/Bennnoo/GOFusion. We provide a supplementary video demonstration at https://youtu.be/pLQKbxQvb6I.

0.32

DrawSplat: Atlanta World-Guided Implicit Gaussian SLAM for Indoor Reconstruction

cs.CV cs.RO ·2026-10-30 ·Fan Zhu, Zhisong Xu, Ziyu Chen, Zhenjun Zhao, Takayuki Okatani
similarity 0.71
Abstract

RGB-D SLAM requires accurate online tracking, high-quality rendering, and geometrically consistent reconstruction. Existing Gaussian SLAM methods mainly optimize Gaussian primitives with photometric, depth, or local frame-to-model constraints, which are often insufficient in indoor scenes with weak textures, large planar structures, noisy depth, and long trajectories. The resulting maps may suffer from pose drift, surface thickness artifacts, noisy normals, and blurred structural boundaries. We propose DrawSplat, an Atlanta World-guided implicit Gaussian SLAM framework for indoor reconstruction. DrawSplat follows a drawing-like process: explicit point-line geometry first sketches the structural layout, and implicit neural Gaussians then fill in high-fidelity appearance and continuous geometric details. It estimates camera poses, sparse geometry, and gravity direction through point-line joint tracking, infers structural planes from tracked lines using the shared-gravity component of the Atlanta World prior, and converts them into differentiable regularization terms on Gaussian centers and normals. To improve compactness and efficiency, DrawSplat further combines an anchor-based implicit neural Gaussian representation with adaptive structural sampling, which allocates Gaussian capacity to structurally informative regions. Experiments on multiple datasets show that DrawSplat achieves robust tracking, high-fidelity rendering, and strong geometric reconstruction among Gaussian-based SLAM systems, while maintaining a practical balance among quality, efficiency, and model size.

0.15

SG^2SLAM: Spatial Geometry-Informed 3D Gaussian Splatting SLAM for Monocular Outdoor Navigation

cs.RO ·2026-10-26 ·Ziang Guo, Didar Seyidov, Yixiao Zhou, Xuefeng Zhang, Ali Alridha Abdulkarim +3 more
code/data similarity 0.71
Abstract · 9 pages

Monocular outdoor navigation requires robust camera motion estimation and a dense, navigable map, where 3D Gaussian Splatting SLAM serves this task through an explicit differentiable parameterization and closed-form projection. However, typically, the geometry is recovered by associating 2D pixels with 3D points, so a modular SLAM system absorbs tracking error into the map, leading to cascading degradation. To address these gaps, we present SG^2SLAM, which couples streaming spatial geometry with a ray-conditioned 3DGS kernel. Streaming spatial geometry replaces the per- frame cross-dimensional correspondence with a chunk-level metric prior that supervises tracking and mapping from one source. A ray-conditioned kernel extends each primitive with a viewing-direction subspace that senses the monocular camera viewpoints. The joint optimization over spatial geometry and poses ensures a globally consistent map and trajectory outcome. Experiments on the KITTI and Waymo Open datasets show that our SG^2SLAM surpasses the per-frame association baselines in the monocular outdoor navigation task. Code will be made publicly available upon acceptance.

0.36