CS Paper Radar

Closing the BF16-FP16 Convergence Speed Gap in RL Post-Training with Stochastic Rounding

Mahdi Nazemi, Oleg Rybakov, Tijmen Blankevoort, Asit Mishra, Carlo del Mundo

cs.LG stat.ML ·submitted 2026-11-10 04:07 UTC · v1

Abstract

BF16 is widely used to pretrain large language models because it has the same dynamic range as FP32 and converges similarly to FP32 training. However, in reinforcement learning with verifiable rewards, where learning rates are typically low, we find that standard mixed-precision BF16 training converges more slowly than FP16 training at the same learning rate. We attribute this gap to weight sticking: when FP32 shadow weights are quantized to BF16 using round-to-nearest, small updates often leave the BF16 weights used for rollout generation and training unchanged. Consequently, several optimizer steps may be needed before updates to the shadow weights are reflected in the BF16 weights. Raising the BF16 learning rate reduces weight sticking and matches FP16's convergence speed, but it also increases the KL divergence from the reference model. We instead apply stochastic rounding when quantizing the FP32 shadow weights to BF16. This approach matches FP16's convergence speed across different models and datasets while reducing the KL divergence relative to BF16 training with a larger learning rate. Unlike FP16, it keeps BF16's wider dynamic range and needs no loss scaling.

Closest papers

Nearest neighbours by meaning across the whole index.

bf16 Rounding Silently Discards Most RL Policy Updates: A Hidden Training-Inference Mismatch and an Unbiased One-Line Fix

cs.LG cs.AI ·2026-10-29 ·Andrew Gao, William Gao
similarity 0.78
Abstract

Reinforcement learning (RL) post-training of language models keeps fp32 master weights in the optimizer and serves rollouts from a bf16 copy produced by round-to-nearest conversion. At the learning rates in common use, most per-step updates are smaller than half a bf16 spacing and the conversion discards them: on Qwen3-1.7B only 0.4-0.5% of served weights change per step, and the policy that generates the training data lags the optimizer by 50-150 steps. Existing mismatch corrections cannot see this lag because they compare two copies downstream of the same rounding. We propose Fair Cast: export the master with an unbiased rounding rule (stochastic rounding or error feedback) and compute the training loss on the served copy. The change is one line at the export call, adds no hyperparameters and costs 22-38 ms per export of 1.7B parameters. Across 25 matched seed-pairs on Qwen3-0.6B to 4B with AdamW and Muon, Fair Cast is ahead on 18, tied on 6 and behind on 1, with a mean gain of 6.1 points; on zebra puzzles it reaches 0.57 +/- 0.16 over four runs where round-to-nearest collapses to 0.33 +/- 0.10. It also makes the saved fp32 checkpoint agree with the served model, and it exposes the implicit lag of round-to-nearest as a regularizer that can be restored explicitly when a task needs it.

0.09

Where Rounding Happens Matters: Rounding-Location Alignment Stabilizes LLM Reinforcement Learning

cs.LG cs.AI ·2026-10-23 ·Yijing Ke, Tianle Cai, Ruosong Wang
similarity 0.75
Abstract

Reinforcement learning for large language models often uses separate systems for inference and training. Even with identical weights and BF16 tensors, implementation differences can make an intended on-policy update off-policy and destabilize training. Existing remedies align the entire inference and training stacks, change global precision, or modify the learning algorithm. We ask whether aligning selected parts of the execution stack can stabilize BF16 RL while other implementation differences remain. We align training-side rounding locations with inference in three regions---RoPE, SwiGLU, and residual RMSNorm---by retaining selected intermediates in FP32 until their BF16 outputs. Across four Qwen-family models, aligning all three regions prevents the collapse observed under the default BF16 baseline; RoPE-path alignment alone also suffices in the studied runs, despite remaining numerical discrepancies. The interventions keep the inference engine, matrix-multiplication and attention kernels, and learning objective unchanged.

0.38

miniTE: Diagnosing and Bridging the Execution Gap in Native NVFP4 Reinforcement Learning

cs.LG cs.AIstat.ML ·2026-10-07 ·Zhen Li, Mingfa Feng, Yiming Zhang, Yang Yu, Changhai Zhou +4 more
benchmark similarity 0.67
Abstract

Native NVFP4 promises to accelerate reinforcement learning (RL) for large language models (LLMs), but achieving stable learning across separate training and sampling engines remains challenging. We show that matching model weights and numerical formats is insufficient to ensure consistent policy evaluation, highlighting the importance of cross-engine numerical execution. We introduce miniTE, a lightweight framework that combines execution diagnostics, cross-engine numerical alignment, and efficient native W4A4 (4-bit weights and activations) GEMM computation for LLM RL. It improves numerical execution consistency without modifying the RL objective, while reducing implementation overhead to realize the benefits of native low-bit computation. Long-horizon RL experiments on Qwen3-30B-A3B demonstrate stable training and benchmark performance close to BF16, outperforming naive Transformer Engine (TE) NVFP4 in evaluation quality. On single NVIDIA B300 GPU node, the optimized learner reaches 33,540 tokens/s, yielding 1.39x and 1.47x the throughput of BF16 and TE NVFP4, respectively, for complete learner updates. We released the framework, kernels, diagnostics, and training configurations to make native low-bit RL easier.

0.25

Towards Full Pipeline FP8 Reinforcement Learning for LLMs

cs.LG cs.AI ·2026-09-19 ·Fanchao Chen, Ziheng Jiang, Ziyun Wei, Zheng Zhong, Du Li +3 more
theory similarity 0.66
Abstract · 17 pages, 16 figures, 4 tables

Reinforcement learning (RL) has become a key technique for improving the reasoning and agentic abilities of large language models (LLMs). Although FP8 quantization can accelerate RL training, maintaining stability throughout an FP8 RL pipeline remains challenging. While previous works have focused on resolving train-inference mismatches using correction techniques like TIS, we reveal that full-pipeline FP8 RL still suffers from severe training instability, manifesting as anomalous mid-training entropy surges and garbled outputs. We trace this instability to a previously overlooked cause: compounded FP8 quantization noise distorts the importance ratio, disproportionately pushing negative-advantage tokens outside the trust region and erroneously zeroing out their gradients. As a result, pathological outputs are not properly penalized and accumulate over the course of training. To address this, we propose Calibrated Clipping, a dynamic method that aligns the FP8 clipping bounds with high-precision BF16 distributions by matching the lower-bound clipping quantile and rebalancing the upper bound accordingly. Extensive experiments across GRPO and DAPO algorithms, model scales from 8B to 32B, and multiple FP8 scaling granularities demonstrate that our approach successfully eliminates entropy surges and restores performance comparable to the BF16 baseline.

0.42

Delta-Matching: Closing the Final Gap of Native 8-bit Training for LLMs

cs.LG ·2026-09-29 ·Haozhan Tang, Hao Kang, Han Cai, Song Han, Chenyan Xiong
similarity 0.65
Abstract

Reliable FP8 attention remains a barrier to fully native 8-bit large language model training. We derive how forward-backward inconsistencies produce stale delta and empirically show how it distorts training dynamics. Our stale-delta hybrid runs show a modest loss gap at 569M parameters but substantial loss increases and downstream degradation at 1.67B and 5.29B. QK normalization, NoPE (no positional encoding), and lower-learning-rate context extension mitigate or delay degradation without eliminating it. This pattern suggests accumulated optimization error that smaller models and short runs can conceal. We propose Delta-Matching, proving that it restores the softmax gradient's zero-row-sum invariant under the stated numerical assumptions. It enables native block-scaled FP8 in every forward and backward attention-core matmul without architectural changes, smaller global batches, or auxiliary forward outputs. Across tested architectures, scales, and training stages, Delta-Matching matches BF16/FP32 mixed-precision training loss and overall downstream performance. We will release our implementation, trained models, and data recipes (https://jet-ai-projects.github.io/delta-matching).

0.22

What a Weight Update Buys: Leverage Across Training Stages

cs.LG cs.CL ·2026-10-27 ·Shikhar Shiromani
code/datahot direction similarity 0.65
Abstract

Post-training moves a language model's weights by about a thousandth of their norm and changes its behavior sharply; pretraining moves them by a third and buys a slow drift. We introduce leverage, an exact measure of what a unit of weight change buys: the Fisher quadratic form of an update, computed with one forward-mode pass per direction, divided by the same form for random directions of the same size at the same checkpoint. Leverage orders released Olmo-3, Tülu-3, Zephyr, and OLMo-2 checkpoints over four orders of magnitude: pretraining windows sit at the random level on prose, SFT five times above it, RL-Zero and RLVR at 400-1,500, and DPO at 400-23,000. With this instrument we find that pretraining accumulates into noise: windows of 30k to 1M steps are no more consequential on prose than random directions of their size, as a noisy quadratic model of SGD predicts. We find that training precision changes what an update looks like: training bf16 parameters without an fp32 master copy freezes 36-99% of coordinates, lowers leverage up to sevenfold, and creates an alignment between update magnitudes and the diagonal Fisher that fp32 training does not show. We derive and verify a law for reuse: the sign-flip null predicts the relative damage of random drop-and-rescale (DARE) at keep rate $p$ as $(1-p)/(p\,ρ_{\mathrm{sign}})$, within a factor of two of measurement wherever DARE succeeds. Two controls make these readings reliable: every controlled SFT and DPO trajectory with fp32 master weights loses leverage as it moves, and two re-runs of a released DPO stage from its anchor with its published recipe land within 1% of the released displacement and 4% of its leverage, where a plain recipe reads five to six times lower; leaving one component out traces the level to the length-normalized loss and its batch size of 128 together.

0.36

Training an MoE LLM in MXFP4: How We Closed the Gap to BF16

cs.AI ·2026-10-23 ·Han Wang, Zhitao Wang, Natalia Frumkin, Xuanwu Yin, Alireza Khodamoradi +2 more
benchmarkcode/data similarity 0.65
Abstract

Training large language models (LLMs) in sub-8-bit arithmetic promises substantial gains in memory bandwidth and compute throughput, yet FP4 formats introduce quantization error severe enough to destabilize optimization if left unaddressed. We present ALTO, an open-source training recipe for GPT-OSS-20B, a 20-billion-parameter mixture-of-experts (MoE) model, on the MLPerf Small MoE Training benchmark under the MXFP4 microscaling format. The recipe combines established techniques from Abecassis, Felix et al. [arXiv:2509.25149] (hybrid 1D/2D block quantization, randomized Hadamard transforms, and stochastic rounding) with a simplified weight de-oscillation scheme adapted from TetraJet-v2 [arXiv:2510.27527]. On C4 validation at global batch size 16, MXFP4 + RHT + SR + de-oscillation reaches a validation loss of 3.3350 at 16,128 steps, only 0.007 above the BF16 baseline (3.3283), closing roughly 50% of the gap left by MXFP4 without de-oscillation (3.3418). Measured by steps to reach the MLPerf quality target (validation loss 3.34), de-oscillation cuts the FP4 convergence overhead relative to BF16 from +20.0% to +5.0%. We also report negative end-to-end results from differential gradient estimation, outlier clipping, and macro-block scaling, despite each showing operator-level SNR gains. All experiments use simulated MXFP4 kernels on AMD MI300X hardware and wall-clock speed has not been optimized.

0.26

FlashNext-RL: A System Optimization Study for Long-Horizon Agentic RL of Qwen3.8-Flash-Next

cs.LG cs.CL ·2026-10-20 ·Zhewei Yao, Yuxiong He
code/data similarity 0.65
Abstract · 24 pages, 5 figures, 16 tables

Long-horizon agentic reinforcement learning (RL) requires both efficient rollout generation and training on long sequences. However, the memory requirements and model-specific operators of Qwen3.8-Flash-Next make this difficult with existing open-source implementations. To resolve these limitations, we introduce FlashNext-RL, a model-specific RL training optimization framework based on prime-rl, with vLLM for software engineering (SWE) rollout generation. Our main focus is BF16 training of the full 48-layer model on a single 8xB200 node, with the first two layers, the n-gram table, the sparse-attention indexer and the multi-token prediction head frozen. We optimize host offload, gradient accumulation and the kernels for mixture-of-experts, sparse attention and the gated residual stream. In the full-model development study, non-padding training throughput increases from approximately 395 tokens/s/GPU in the initial 32K-token configuration to 4,438 tokens/s/GPU in the optimized 131K-token configuration, with hardware matmul throughput (aka without considering the cost of attention components) increasing from approximately 20 to 213 TFLOPs/GPU. A controlled cumulative study on an 8-layer model further quantifies the contributions of individual optimizations. Together with three inference nodes, the system supports a live SWE RL run with a target batch of 1,024 trainable rollouts and a 131,072-token context limit. Over steps 5-15, an iteration takes 22.4 minutes on average, with bounded entropy and trainer-sampler mismatch KL. These results highlight the importance of tailoring RL training to the model's architecture, memory layout and kernel requirements, rather than relying only on general-purpose RL infrastructure.

0.34