CS Paper Radar

DepthGS: Depth-Guided Gaussian Splatting with Adaptive Regularization for High-Quality Surface Reconstruction

Xiao Ren, Yu Liu, Ning An, Jian Cheng, Xin Qiao, You-Fu Li, He Kong

cs.CV ·submitted 2026-11-10 06:16 UTC · v1
top venue

Abstract

Recently, 3D Gaussian Splatting (3DGS) has emerged as an efficient representation for novel view synthesis, offering fast differentiable rendering and high visual fidelity, and has increasingly been extended to surface reconstruction. However, the relationship between depth information and reconstruction error remains insufficiently explored, limiting the principled design of geometric optimization strategies. To fill the above gap, we propose DepthGS, a depth-guided Gaussian splatting framework. We derive theoretical relations between depth discrepancies and reconstruction error under single-view and multi-view settings, and rigorously establish corresponding upper bounds on reconstruction error. The above analysis informs the design of adaptive regularization strategies in both single-view and multi-view optimization. More specifically, for single-view optimization, we propose a depth-difference-guided adaptive normal regularization strategy that modulates the normal constraint strength using a geometric reliability weight computed from local depth differences. For multi-view optimization, we introduce a cross-view depth consistency regularization strategy that promotes consistency between neighboring-view depth maps and the corresponding depth predictions obtained by transforming the current view's depth predictions into those neighboring views. Extensive experiments on DTU, Mip-NeRF360, and Tanks and Temples demonstrate that DepthGS achieves competitive performance in both surface reconstruction and novel view synthesis.

Comment
To appear in IEEE Trans. on Pattern Analysis and Machine Intelligence

Closest papers

Nearest neighbours by meaning across the whole index.

Prior-Driven Enhancements in 3D Gaussian Splatting: Normals and Depths Regularization

cs.CV ·2026-09-29 ·Gyeonggwan Lee, Seunghwan Hong, Junghun Suh
publishedcode/data similarity 0.84
Abstract · 7 pages, 2 figures, 1 table. Oral presentation at ISPRS Geospatial Week 2025 (Dubai). Project page: https://gandanlee.github.io/pdigs/ Code:…

3D Gaussian Splatting (3DGS) is a state-of-the-art technique for 3D scene rendering, offering high efficiency and excellent visual quality. However, because 3DGS relies on an initial sparse point set from Structure-from-Motion (SfM) and view-dependent properties, it can suffer from geometric inaccuracies and visual artifacts, particularly in complex scenes. To address these challenges, we propose an improved 3DGS approach that regularizes the optimization process by integrating geometric priors, including surface normals and dense depth information. Surface normal regularization improves geometric consistency by aligning Gaussian covariance with local surface structures, while dense depth priors combined with an initial points from SfM enhance per-pixel depth estimation, increasing accuracy and reducing ambiguities. These enhancements enable robust handling of diverse and complex real-world scenarios, minimizing visual distortions and improving reconstruction quality across various environments. To validate our method, we evaluate it on challenging datasets, including street-view scenes and highly reflective environments, while testing it across multiple SfM pipelines. Our results demonstrate compatibility across diverse environments and highlight the robustness of our approach. Experimental findings further show that our method enhances geometric accuracy and visual quality, establishing a reliable solution for real-time 3D scene rendering in complex environments.

0.61

CoMVS-GS: Collaborative Multi-View Stereo and 3D Gaussian Splatting for Surface Reconstruction

cs.CV ·2026-08-19 ·Shihan Chen, Junjing Zhang, Qingsong Yan, Haibing Liu, Haofan Ren +1 more
similarity 0.78
Abstract

3D Gaussian Splatting enables efficient novel view synthesis, but accurate mesh reconstruction remains difficult in weakly observed and occluded regions, where Gaussian primitives may grow into unstable or geometrically inconsistent structures. We propose CoMVS-GS, a general surface reconstruction framework that combines Multi-View Stereo with Gaussian splatting. CoMVS-GS initializes Gaussian primitives from dense multi-view stereo points with pre-flattened scales and normal-aligned orientations, providing stronger geometric priors than sparse structure-from-motion initialization and reducing ambiguity during early optimization. It further introduces PatchMatch-3DGS Mutual Supervision, where Gaussian-rendered depths and normals initialize PatchMatch refinement, and refined PatchMatch depths supervise Gaussian optimization to improve weakly constrained geometry. For surface extraction, CoMVS-GS replaces truncated signed distance field voxel fusion with a Delaunay graph-cut meshing pipeline, reducing sensitivity to voxel resolution while preserving visibility-consistent surface evidence. Experiments on DTU, GauU-Scene V2, and MatrixCity show that CoMVS-GS remains competitive on object-level reconstruction and improves geometric accuracy and mesh compactness in outdoor scenes while maintaining high rendering quality.

0.18

Remote Sensing Sparse-View 3D Gaussian Splatting via Depth Image-Based Rendering

cs.CV ·2026-09-28 ·Jiaming Kang, Zhengxia Zou, Zhenwei Shi
code/data similarity 0.78
Abstract

Remote sensing novel view synthesis under sparse observations remains challenging due to insufficient geometric constraints and limited cross-view supervision. Existing Neural Radiance Fields (NeRF) and 3D Gaussian Splatting (3DGS) methods are prone to overfitting and face challenges of depth ambiguities, missing cross-view information, and insufficient constraints in under-observed regions. To address these challenges, we propose DIBR-GS, a neural Gaussian Splatting framework that exploits Depth Image-Based Rendering (DIBR) to generate pseudo views for cross-view consistency supervision. Specifically, reliable geometric initialization is constructed by aligning monocular depth priors with sparse SfM reconstruction, and cross-view appearance priors are incorporated into neural Gaussian representations to enhance appearance modeling under sparse observations. Furthermore, we introduce a progressive DIBR-based pseudo-view supervision strategy to provide additional geometric and appearance constraints, enabling more complete reconstruction of weakly observed regions. In addition, a height-constrained anchor growth strategy is designed to suppress unreasonable Gaussian expansion. Experiments demonstrate that the proposed method achieves superior performance over existing approaches when training with only 3 input views. Compared with the previous best-performing method, it improves PSNR by 6.83 dB, with relative gains of 14\% in SSIM and 60\% in LPIPS, while maintaining competitive computational efficiency. Our code is available at https://github.com/kanehub/DIBR-GS

0.23

Sparse-GS2Mesh: 3D Gaussian Splatting Guided by Novel Stereo Views and 2DGS for Sparse View Surface Reconstruction

cs.CV ·2026-10-03 ·Younghyun Noh, Minje Kim, Tae-Kyun Kim
publishedcode/data similarity 0.77
Abstract · Accepted to NIPS 2026 PhysWorldAI workshops. Project Page: https://yhnoh8623.github.io/projects/s-gs2mesh/

Surface reconstruction under sparse-view settings remains challenging due to limited geometric cues. Volume rendering methods based on signed distance functions often produce over-smoothed surfaces, while 3D Gaussian Splatting (3DGS), though time-efficient, suffers from incomplete geometry due to the lack of reliable depth supervision and the limitation of being optimized only from given input views. In this paper, we present Sparse-GS2Mesh, a stereo-aware framework for surface reconstruction from sparse views. While 3DGS and stereo matching have been leveraged for surface reconstruction under dense view settings, we extend them to operate effectively under sparse view conditions by first initializing 3DGS using epipolar depth priors to mitigate the 3DGS overfitting problem, followed by our three key components: (I) adaptive baseline selection, (II) fine-tuning with a stereo matching network, and (III) 2D/3D co-regularized fine-tuning. Given a warmed-up 3DGS initialized with epipolar depth, the adaptive baseline selection automatically determines a baseline to synthesize for each sparse view. We then fine-tune 3DGS by backpropagating depth-refining gradients from the stereo matching network, effectively specializing the 3DGS for stereo matching. The 2D/3D co-regularization further helps obtain stable reconstruction, addressing weak geometric cues in close stereo views. Sparse-GS2Mesh achieves a 15\% improvement over state-of-the-art methods in little-overlap settings and comparable results in large-overlap settings. Project page: https://yhnoh8623.github.io/projects/s-gs2mesh/.

0.26

D3GS: Depth, DINO, and RGB Diffusion Co-Guided 3D Gaussian Splatting for Sparse-View Reconstruction

cs.CV ·2026-09-19 ·Yunqi Gao, Zhanfeng Liao, Hanzhang Tu, Zhaoqi Su, Guoqing Zheng +5 more
similarity 0.77
Abstract

Novel view synthesis from sparse inputs remains challenging for 3D Gaussian Splatting (3DGS) due to ambiguous geometry, cross-view inconsistency, and missing details in under-constrained regions, resulting in degraded reconstruction and unstable rendering. To tackle these issues, we propose D$^{3}$GS, a Depth-DINO-Diffusion guided sparse-view Gaussian reconstruction framework that jointly enhances geometry and appearance. D$^{3}$GS first recovers a high-resolution, metric depth map via diffusion-based completion and DPT (Dense Prediction Transformer) refinement, providing robust Gaussian initialization and geometric constraints. Then, a DINO-guided view-consistent learning is introduced to augment Gaussian attributes with structural features, improving multi-view consistency. Finally, a diffusion-based Gaussian refinement module injects generative priors into an iterative optimization strategy, enhancing high-frequency geometric and appearance details within the Gaussian representation. Experiments on DTU, LLFF, and Mip-NeRF 360 show that D$^{3}$GS achieves consistent and substantial improvements over strong baselines, with ablation studies validating the effectiveness and complementary roles of each component.

0.10

GARO: Geometry-Aware Redundancy Optimization for Real-Time and High-Fidelity Dynamic Gaussian Splatting

cs.CV ·2026-09-20 ·Huiwen Xue, Kaixing Zhao, Zuheng Ming, Tingcheng Li
top venue similarity 0.76
Abstract · 8 pages. Accepted to IEEE ICRA 2026

Novel view synthesis is a key task for dynamic scene reconstruction, where high rendering speed is essential for applications such as virtual reality. Existing deformable Gaussian Splatting methods achieve high-fidelity dynamic scene modeling, but still face limitations in memory usage and rendering efficiency due to the large number of redundant Gaussians. To address these challenges, we propose Geometry-Aware Redundancy Optimization (GARO), a unified redundancy measurement framework in the adaptive density control stage of the traditional dynamic scene reconstruction pipeline. This framework first selects low-gradient candidates using an optimization activity assessment strategy, and then evaluates geometric complexity through low curvature analysis to further filter and prune redundant points, resulting in a compact and expressive Gaussian representation. Extensive experiments on synthetic and real-world datasets demonstrate that GARO achieves robust trade-offs between quality and speed, with PSNR remaining stable and rendering speed improved by 2x, validating the efficiency and effectiveness of GARO.

0.41

Seeing the Unseen: Semantic-in-Gaussian for Sparse-View 3D Generalization

cs.CV ·2026-08-24 ·Zeyang Bai, Yunpeng Wang, Yunbiao Wang, Jun Xiao
published similarity 0.75
Abstract · Accepted at the ECCV 2026 Workshop on 3DWM

Generalizable 3D Gaussian Splatting (G-3DGS) has emerged as a promising approach for novel view synthesis undersparse-view settings. However, existing frameworks remain restricted by pixel-aligned Gaussian estimation, whichstruggles in partially observed or occluded regions and often leads to incomplete surfaces or structural collapse. Toaddress these challenges, we propose SeeU (Seeing the Unseen), a novel G-3DGS framework. We frame its core design asSemantic-in-Gaussian: semantic-conditioned refinement in Gaussian space. Specifically, we introduce a Cross-viewEntropy-Aware (CEA) module that aggregates multi-view semantic and geometric cues into compact embeddings. Theseembeddings guide the Conditional Gaussian Transformer, which applies residual updates to coarse Gaussians, helpingrecover under-constrained regions of partially observed structures while preserving surface consistency. Comprehensiveexperiments on multiple benchmarks demonstrate that SeeU consistently improves rendering quality and structuralcompleteness while retaining efficient feed-forward inference. Especially under challenging extrapolation settings,SeeU achieves an average improvement of 2.44 dB in PSNR compared to recent SOTA G-3DGS methods.

0.24

ACD-GS: Asymmetric Curvature-aware Densification for 3D Gaussian Splatting

cs.CV ·2026-10-29 ·Houqiang Zhong, Tianchi Zhu, Qiang Hu, Xiaoyun Zhang, Li Song +1 more
code/data similarity 0.75
Abstract

3D Gaussian Splatting (3DGS) has emerged as a powerful paradigm for real-time photorealistic novel view synthesis. However, its training-time densification remains largely heuristic, often resulting in redundant Gaussian proliferation and inaccurate geometric reconstruction. Existing methods predominantly rely on first-order screen-space gradients to trigger cloning and splitting, which fail to distinguish true geometric discontinuities from high-frequency textures or noisy residuals. To address this limitation, we propose ACD-GS, an Asymmetric Curvature-aware Densification framework for compact and geometry-aware 3D Gaussian optimization. Our key insight is that second-order depth responses provide a more reliable structural prior for density control, enabling asymmetric regulation of cloning and splitting to better capture geometric discontinuities. Building on this, we introduce a multi-view photometric consistency constraint to suppress transient single-view errors, together with a capacity-aware adaptive regulation strategy that balances densification and pruning during training. Unlike post-hoc compression or quantization-based approaches, ACD-GS directly prevents redundant Gaussian generation during training, yielding inherently compact representations. Extensive experiments demonstrate that our method reduces nearly 60% of Gaussian count and storage while maintaining competitive rendering fidelity, consistently outperforming existing methods across multiple datasets. Our code is available in https://waveviewer.github.io/ACD-GS/.

0.25