CS Paper Radar

Joint-State Inference for Autonomous Excavators Using Cab-View Vision-Control Fusion

Junwei Li, Jian Pan, Mengchi Cai, Shuai Zhao, Xizhuo Jiang, Zheng Wang, Qing Xu, Keqiang Li, Jianqiang Wang

cs.RO ·submitted 2026-11-10 07:38 UTC · v1

Abstract

Reliable state feedback of excavator front-end mechanisms is essential for autonomous excavation, yet retrofitting existing machines with dedicated joint sensors, external cameras, or visual markers can increase deployment and maintenance burdens. This paper proposes a closed-loop autonomous excavation framework for continuous inference of excavator joint states using onboard visual observations and control-related temporal information. The framework encodes structural cues from the current cab-view image, models short-term motion trends from historical joystick commands, and introduces a rolling state buffer for the bucket joint to preserve temporal continuity under severe occlusion. Mechanical joint-range constraints are incorporated into the learning objective to suppress infeasible estimates. The current cab-view image and inferred states are supplied to an Action Chunking with Transformers (ACT)-based control policy for online action generation. Experiments in an AGX Dynamics for Unity simulation environment under diverse operating conditions evaluate joint-state inference and end-to-end task execution. Across 20 autonomous excavation trials, the framework achieved a 95% task-completion rate, with an average joint-state-inference-and-control latency of 10.11 ms per step. The bucket-joint inference achieved a mean absolute error (MAE) of 0.965 degrees. These results demonstrate a sensor-light and computationally efficient joint-state-inference approach that can support closed-loop autonomous excavation with reduced dependence on additional sensing infrastructure.

Closest papers

Nearest neighbours by meaning across the whole index.

From Target Selection to Digging: A Learning-Based Framework for Continuous Autonomous Excavation

cs.RO ·2026-09-24 ·Shuai Zhao, Ji-an Pan, Quantao Yang, Zheng Wang, Chaoyi Chen +2 more
similarity 0.73
Abstract · 8 pages, 7 figures, 4 tables. Updated author affiliations; technical content unchanged

Repeated excavation continuously reshapes pile geometry, requiring an autonomous excavator to adapt its digging targets and coordinate motion across successive excavation cycles. We present a learning-based framework for continuous autonomous excavation that integrates terrain-aware target selection with reinforcement- and imitation-learning controllers. The framework separates target-conditioned motion from local digging: a shared task-conditioned RL policy controls waypoint-guided approach and loaded transport, while an IL policy learns vision-based digging and lifting from expert demonstrations. Digging targets are selected from LiDAR elevation maps and converted into bucket-tip waypoints for motion control. The control architecture coordinates the learned policies and deterministic unloading through a shared motion interface. The complete system is deployed on a scaled hydraulic excavator with multimodal sensing and closed-loop actuator control. Offline replay and physical experiments demonstrate more consistent target selection, shorter local motion time, and increased payload compared with the respective baselines. The learned digging policy achieves a mean payload of 6.52 kg per completed cycle, compared with 2.68 kg for Fixed Dig. Three five-scoop runs further demonstrate consecutive autonomous excavation under continuously changing pile geometry.

0.22

Recovering the View: Benchmarking Physical Active Vision for Occlusion Recovery in Robotic Manipulation

cs.RO ·2026-09-29 ·Kaijun Luo, Yudi Huang, Qijun Zhong, Xinshuai Song, Yang Liu +1 more
benchmarkcode/data similarity 0.69
Abstract · 20 pages, 8 figures, Project page: https://hcplab-sysu.github.io/BAVO-Bench

Physical active vision allows robots to change their viewpoint when task-relevant observations become unreliable, yet existing manipulation benchmarks provide limited support for studying how policies recover from occlusion during execution. We introduce BAVO-Bench (Bimanual Active Vision under Occlusion), a bimanual active-vision benchmark that systematically controls external visibility through Clean, Stage Occlusion, and Random-time Occlusion conditions, enabling evaluation of both manipulation performance and active visual recovery. Building on this setting, we present A-FAR (Active Future-Aware Recovery), an active-vision policy for joint viewpoint and manipulation control. A-FAR represents moving-camera observations in a unified robot-centric 3D frame and distills relational structure together with its future evolution from a pretrained 4D model, providing the policy with future-aware geometric guidance without requiring future observations at deployment. Experiments across multiple manipulation tasks show that A-FAR improves robustness to both structured and temporally shifted occlusions while maintaining strong performance under clean observations.

0.34

Vision Guided Target Conditioned Control for Autonomous Excavation

cs.RO ·2026-08-22 ·Shuai Zhao, Ji-An Pan, Junwei Li, Xun Tang, Fansen Xi +3 more
publishedbenchmark similarity 0.68
Abstract · 5 pages, 3 figures, 3 tables. Accepted at ISCSIC 2026

Autonomous excavation requires an intelligent control system that can convert spatial work intent into coordinated bucket motion under contact-rich soil interaction. This paper presents a target-conditioned intelligent control framework for autonomous excavation in a physics-based deformable-soil simulation workflow. An image-aligned target mask serves as a visual spatial command for the desired digging region, while a mask-conditioned Action Chunking Transformer maps multi-view RGB observations, proprioception, and the target mask to temporally extended joystick commands. To reduce target-ignoring behavior, demonstrations are organized with paired-condition supervision, where the same or closely matched scene is demonstrated with different target masks and corresponding action chunks. The framework is evaluated through both a diagnostic manipulation task and an excavation simulation benchmark with single-scoop and sequential pile-clearing protocols. In manipulation, target success is 4\% for no-condition ACT, 63\% for non-paired mask-conditioned ACT, and 96\% for paired-condition mask-conditioned ACT. In sequential pile clearing, paired-condition mask-conditioned ACT removes 76.8\% of the pile versus 27.4\% and 15.7\% for the two baselines, with 91.0\% human-normalized efficiency. The results show that visual target conditioning, paired demonstration structure, and action-chunk control form a practical cyber-physical simulation pipeline for excavator automation.

0.26

ActiveWAM: Evidence-Aware Active Vision for World-Action Models

cs.RO ·2026-10-01 ·Renjun Wu, Luzhou Ge, Xuesong Li
benchmark similarity 0.68
Abstract

Active vision manipulation requires a policy to control both its camera and its end-effectors, yet camera motion determines which evidence remains visible within finite observation windows. Acquiring a new view can displace task-critical cues, while retaining a view forgoes potentially useful observations. We formulate this as an evidence-aware retain--acquire problem and present ActiveWAM, a unified world--action model that learns observation and manipulation jointly. To this end, we propose training-time inversion which constrains a frozen video prior by task-bearing source evidence and visible temporal changes, eliminating the need for test-time inversion or candidate ranking. At deployment, the policy generates bimanual and pan/tilt actions-including stay and reacquisition behaviors-from view-aware history, and updates context from newly measured RGB observations. Future-video prediction serves as a co-training signal, while action generation requires neither future-video decoding nor optimal viewpoint annotations. We introduce RoboTwin-AV, a 50-task benchmark with executable pan/tilt control and automatically generated demonstrations. ActiveWAM improves TAVIS out-of-distribution success by up to 17.0 percentage points over the strongest baselines, achieves 20.0 additional points over Fast-WAM on RoboTwin-AV, and outperforms it by 26.7 points on real-world physical kitchen tasks.

0.22

ExcavaTwin: Training-Free Geometry-Guided Semantic Elevation Mapping for Autonomous Excavation

cs.RO ·2026-09-28 ·Yu Deng, Lingshan Zeng, Tong Hu, Rushi Dai
similarity 0.67
Abstract · 8 pages,5 figures

Autonomous excavation requires a spatial representation that jointly captures terrain geometry and task-relevant semantics. Existing excavation mapping is largely elevation-centric, while generic semantic models remain unstable in unstructured outdoor scenes. We present ExcavaTwin, a pure-vision geometry-guided semantic elevation mapping framework without excavation-specific training. Given multi-view RGB images, the framework: 1) reconstructs scene geometry and semantic observations using frozen vision models; 2) derives terrain and non-terrain geometric support; 3) performs geometry-constrained multi-view semantic fusion to suppress implausible predictions and recover incomplete observations; and 4) projects the fused state into a task-oriented semantic elevation map. Experiments on public datasets and real excavation scenes demonstrate reliable geometric and semantic perception. In real excavation, the system achieved an average update interval of approximately 1.4 s and a mean elevation error of 12.74cm in dynamically modified regions. Larger errors mainly occur during rapid terrain changes and transient visual disturbances caused by machine motion.

0.19

RoboFQE: Rollout-Free Evaluation of Visual Robot Policies from Offline Trajectories

cs.RO ·2026-10-13 ·Yunfu Deng, Sangwoo Shin, Brahma S. Pavse, Josiah P. Hanna
similarity 0.67
Abstract

Evaluating robot policies before deployment typically requires producing new trajectories through real-world execution, simulators, or learned world models. These rollout-based approaches impose infrastructure requirements; simulator and world-model evaluators additionally face prediction errors that can compound over the evaluation horizon. In this paper, we study off-policy evaluation as an alternative to rollout-based robot-policy evaluation methods. Specifically, we introduce RoboFQE, an evaluator that estimates the discounted expected return of a target policy from offline robot trajectories without estimating a behavior-policy density, combining fitted Q-evaluation with a pretrained vision foundation model and learned terminal success annotation to bridge the gap between standard OPE benchmarks and continuous-control visual manipulation. Controlled experiments across simulated and real-world manipulation tasks show that RoboFQE produces accurate discounted-return estimates and preserves policy rankings even on long-horizon manipulation tasks where video world-model evaluators are degraded by autoregressive prediction errors. Ablation experiments show that pretrained vision encoders substantially outperform from-scratch alternatives, particularly on long-horizon tasks, and that learned terminal success annotation enables evaluation without ground-truth reward labels with only slight reduction of accuracy.

0.17

VLA-Corrector: Stage-Aware Observable State Understanding for Prompt-Based Closed-Loop Recovery of Vision-Language-Action Policies

cs.RO ·2026-09-06 ·Chang Song, Bin Qian, Yan Feng, Zhijie Song
similarity 0.66
Abstract

Long-horizon robot manipulation with Vision-Language-Action (VLA) policies remains vulnerable to execution-time deviations, as final task success provides little information for diagnosing and correcting failures caused by action noise, object displacement, or goal misalignment. We introduce a stage-aware failure verification and Prompt Recovery framework that enables closed-loop correction of a fixed VLA policy without parameter updates or privileged simulator states. The framework introduces an observable-history-based Learned Verifier that jointly estimates manipulation progress and execution risk by temporally modeling multi-view visual observations, proprioceptive states, and executed actions. To provide interpretable task understanding, we represent manipulation execution through semantic progress stages, including approach, alignment, grasp, transport, and placement, and identify stage-specific failure patterns. Upon detecting abnormal execution, the framework preserves the original instruction and generates a stage-conditioned recovery prompt, allowing the same frozen VLA policy to produce corrective actions. Extensive multi-round evaluations on LIBERO and LIBERO Plus demonstrate that the proposed approach substantially improves closed-loop reliability under diverse perturbations. Without access to privileged object or goal coordinates, the Learned Verifier achieves recovery performance close to that of the privileged rule-based verifier in the evaluated settings. These results show that observable visual-proprioceptive-action history is sufficient to infer latent task states and enable practical failure recovery for existing VLA policies.

0.18

Grounded Action Model: 3D Grounding as a Foundation for Robotics

cs.RO ·2026-09-20 ·Gehao Zhang, Weikai Huang, Shailesh Shailesh, Yiyan Peng, Jiafei Duan +1 more
similarity 0.66
Abstract

Manipulation policies must know which objects matter and where they are, yet the pretrained backbones that current robot foundation models build on, from language in vision-language-action models (VLAs) to video generation in world-action models (WAMs), do not directly require this metric grounding, leaving it to be learned implicitly from robot demonstrations. We propose Grounded Action Models (GAMs), a new paradigm of robot foundation models built with 3D grounding. GAM can be conditioned using language, points, or box prompts, which are first transformed into a shared object-centric representation of the selected objects. This representation captures target-focused visual features and metric object geometry, which is mixed with robot state history through a multi-stream transformer to predict action chunks. Although GAMs can be run autonomously, they can also serve as a low-level controller that a high-level planner controls using its various input modalities, allowing for long-horizon and memory-dependent manipulation. On RoboTwin 2.0, GAM achieves an average success rate of 55.3% across 50 tasks (vs. 52.0% for Spatial Forcing), including 47.6% under scene randomization (vs. 30.4% for Abot-M0), with its action policy trained only on clean-scene demonstrations. On LIBERO-PRO, it achieves a state-of-the-art average success rate of 61% (vs. 53% for $π_{0.5}$) across 16 perturbation settings, with the largest gains when targets are relocated or newly designated. On two real robots, GAM retains 17/20 successes under visual shift on a bimanual YAM versus 4/20 for $π_{0.5}$, while its composition with a Molmo2 planner on a Franka achieves 64.7% ID and 49.8% OOD step completion on long-horizon and memory-dependent tasks.

0.40