CS Paper Radar

Joint Activation and Weight Quantization for Learned Image Compression

Yile Tu, Heming Sun

eess.IV cs.MM ·submitted 2026-11-10 08:00 UTC · v1
published

Abstract

Learned image compression (LIC) models achieve competitive rate-distortion performance with increasingly large networks, making network quantization important for efficient deployment. Directly quantizing LIC models remains difficult in post-training quantization (PTQ) because compression performance is highly sensitive to quantization noise. Existing methods typically focus on optimizing either the weights or the activations, resulting in substantial rate-distortion degradation. To address this limitation, we introduce a two-stage pipeline that uses SmoothQuant to balance activation and weight ranges, followed by GPTQ to adapt the transformed weights. The proposed joint search framework optimizes the balancing transformation and adapted weights under the rate-distortion objective, accounting for the coupling between the two stages. Experiments across multiple LIC architectures and activation quantization configurations show that the joint search strategy consistently reduces rate-distortion degradation after quantization.

Comment
Accepted at IEEE VCIP 2026. 5 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

HAMP-LIC: Hessian-Aware Mixed-Precision Post-Training Quantization for Learned Image Compression

cs.CV cs.AIcs.MM ·2026-08-12 ·Yuefeng Zhang
similarity 0.74
Abstract · Learned image compression, post-training quantization, mixed-precision quantization, Hessian-based sensitivity analysis, model compression

Use this plain-text version for the arXiv abstract field: Learned image compression (LIC) models achieve strong rate-distortion performance but are hindered by high computational complexity and encoding-decoding mismatches across heterogeneous hardware platforms. Uniform fixed-precision quantization alleviates these issues but suffers severe quality degradation at low bit widths because it ignores differences in the quantization sensitivities of individual layers. To enable efficient and accurate low-bit deployment of pretrained LIC models, we propose HAMP-LIC, a Hessian-aware mixed-precision post-training quantization (PTQ) framework with a four-stage optimization strategy. First, block-wise sensitivity is estimated from the Hessian trace to capture second-order importance. Second, a task-aware refinement module adjusts these sensitivities by jointly considering quantization distortion and rate-distortion performance. Third, guided by the refined sensitivity profile, bit widths are allocated under a global model-size constraint to balance efficiency and reconstruction quality. Finally, block-wise reconstruction using a small calibration set further suppresses quantization error. Experiments on representative LIC models, including Minnen2018 and Cheng2020, demonstrate that HAMP-LIC achieves up to 4.85x model compression with as little as 0.59% BD-rate loss. It consistently outperforms existing fixed- and mixed-precision PTQ methods across multiple datasets while completely eliminating cross-platform encoding-decoding errors.

0.04

End-to-End Learned Image Coding: From Rate-Distortion Optimization to Practical Deployment

eess.IV cs.MM ·2026-10-15 ·Ming Lu, Junqi Shi, Zhan Ma
benchmark similarity 0.71
Abstract

End-to-end learned image coding (LIC) has achieved substantial improvements in rate--distortion (R--D) performance, yet practical deployment requires addressing a broader set of system-level constraints. This article provides a deployment-oriented review of LIC, with particular attention to the transition from high-performance neural compression models to practical codecs. We first summarize the basic end-to-end coding framework, including learned transforms, quantization, entropy modeling, and R--D optimization. We then review practical extensions that are increasingly important for deployment, including variable-rate coding and rate control, integer-precision inference and cross-platform consistency, robustness and communication resilience, lightweight and hardware-aware implementation, and standardization and interoperability. To study these issues under a common setting, we further introduce TinyLIC as an open benchmark and reproducible case study for rate--distortion--complexity analysis. Experimental results illustrate the trade-offs among compression efficiency, computational complexity, numerical consistency, and robustness. In particular, TinyLIC with approximately 10 KMACs/pixel decoding complexity substantially outperforms the H.265/HEVC image-profile anchor on Kodak, while the 50 KMACs/pixel configuration achieves performance comparable to the H.266/VVC image-profile anchor on several test sets. The review highlights practical constraints and design trade-offs that remain central to the deployment and interoperability of learned image codecs. Materials are accessible at https://njuvision.github.io/TinyLIC.

0.14

Multi-scale Image Representation Compression

eess.IV cs.CVcs.MM ·2026-09-02 ·Tianhao Peng, Ho Man Kwan, Fan Zhang, Shan Liu, David Bull
similarity 0.70
Abstract

Overfitted codecs have demonstrated promising performance for image and video compression. In particular, for image compression, the Cool-chic family of models has shown competitive performance against scene-agnostic models, with orders of magnitude lower decoding complexity at the cost of a longer overfitting process. However, these overfitted image codecs are not fully optimized toward the rate-distortion objective: their network weights remain in full precision during training, and the associated quantization parameters are selected in a separate post-training stage. Furthermore, their synthesis operates at a single scale, which overlooks cross-scale redundancy. In this paper, we propose MIRC, an overfitted image codec in which every coded component, including the latents, the synthesis network, and the entropy models, is quantized and entropy coded under a single rate-distortion objective, adopting the end-to-end compression pipeline of the neural video representation codec NVRC. We further introduce a multi-scale representation with cross-stage parameter sharing, which improves coding efficiency at a small transmitted overhead. On the CLIC2020 professional validation set, MIRC achieves a 10.5% BD-rate saving against VVC (VTM 22.0). Moreover, MIRC offers a family of configurations spanning 1.2 to 2.9 kMAC per pixel, so the decoding budget can be selected to match the deployment target.

0.21

VLCQ: Post-training quantization for deep neural networks using variable length coding

cs.CV cs.AIcs.PF ·2026-10-10 ·Reem Abdel-Salam, Ahmed H. Abdel-Gawad, Amr G. Wassal
publishedhighly cited similarity 0.69
Abstract · Published in Future Generation Computer Systems, Volume 166 (2025), Article 107654

Quantization plays a crucial role in efficiently deploying deep learning models on resource-constrained devices. Post-training quantization does not require access to the original dataset or retraining the full model. Current methods that achieve high performance close to baseline results typically require INT8 fixed-point integers. However, achieving higher model compression with lower bit-widths often leads to significant performance degradation. In this paper, we propose VLCQ, a post-training quantization method that relaxes the fixed-point encoding constraint, enabling more flexible exploration of quantization techniques through variable-length encoding. This approach achieves competitive or improved performance while reducing bit-widths, without requiring access to training data or model fine-tuning. Extensive experiments on image classification, segmentation, and object detection demonstrate that VLCQ improves model compression and accuracy compared with state-of-the-art post-training quantization approaches. For per-channel quantization, VLCQ surpasses FP32 accuracy and Piece-Wise Linear Quantization (PWLQ) on most evaluated models, achieving up to 6x compression compared with FP32 and up to 1.7x compared with PWLQ. When prioritizing compression with limited accuracy loss, VLCQ achieves up to 12.25x compression compared with FP32 with less than 4% performance degradation. For per-tensor quantization, VLCQ is competitive with Data-Free Quantization (DFQ), while providing greater flexibility to achieve lower bit rates across different tasks and models.

0.57

PerQ: Inverse Generative Modeling for Neural Image Compression via Quantization Error Compensation

cs.CV ·2026-10-19 ·Tianhao Peng, Ho Man Kwan, Fan Zhang, Shan Liu, Dave Bull
code/data similarity 0.64
Abstract

Neural image codecs face a fundamental trade-off between pixel fidelity and perceptual quality. Distortion-optimized codecs preserve pixel-wise fidelity but produce blurred reconstructions at low bitrates, whereas generative codecs leverage learned priors to improve perceptual quality but tend to exhibit saturating PSNR at higher bitrates and require separate models for different bitrate targets. We propose PerQ, which reframes perceptual reconstruction as inverse generative modeling with bounded support. Specifically, we define the quantization cell as the set of latents that yield the same transmitted symbols and derive a transport bound showing that reconstructions from this cell remain within a rate-determined radius of the codec output. This motivates performing generative reconstruction within the codec-induced quantization cell, rather than sampling from an unconstrained image prior. PerQ implements this principle by attaching a rate-conditioned flow-matching compensator to a frozen, multi-rate distortion-optimized backbone, enabling perceptual enhancement while preserving the backbone's coding performance. Experiments on Kodak and CLIC2020 show that PerQ achieves perceptual performance comparable to generative codecs such as MS-ILLM in LPIPS and FID, while maintaining competitive PSNR relative to distortion-optimized codecs such as ELIC. A single model checkpoint supports a wide bitrate range with fast decoding, and the compensator provides consistent gains across three different backbones. The implementation is available at https://jasminepp.github.io/PerQ/.

0.31

Channel-Level Mask Guidance for Slimmable Image Compression

eess.IV cs.CV ·2026-10-19 ·Chen Chen, Chenggang Wu, Yongbiao Chen, Weidong Qiu, Zhengwei Qi +1 more
code/data similarity 0.64
Abstract · 14 pages, 12 figures. Submitted to IEEE Transactions on Circuits and Systems for Video Technology (TCSVT)

Learned image compression (LIC) has achieved promising rate-distortion performance, but most methods lack scalability for diverse platforms with varying computational and storage constraints. Existing slimmable LIC methods achieve flexible complexity via consecutive-channel activation but suffer from two limitations: forced consecutive-channel selection degrades narrow-model performance at low bitrates, and the lack of stable variable-rate control limits adaptability to varying bandwidth. We propose a channel-level mask-guided slimmable image compression method. A learnable channel-wise mask with sparsity-promoting regularization enables non-contiguous top-w channel selection, letting narrow models use the most informative channels. After training, mask merging and channel reordering convert the model into a standard slimmable network via Mask-to-Slimmable (M2S) conversion, enabling efficient inference without architectural changes. For variable-rate control, we combine lambda- and width-conditioned modulation with quantization-step scaling and a progressive training pipeline stabilized by a freeze-then-fine-tune strategy. Experiments on Kodak across E2E, Hyperprior, and Checkerboard backbones show superior rate-distortion performance across widths and bitrates, with large gains for narrow models at low bitrates. At w=48, it achieves up to 19.22%, 24.11%, and 22.76% BD-rate savings over the same-width Slimmable baseline on E2E, Hyperprior, and CKBD, respectively. A single VBR model replaces 40 independent models, reducing storage by 14.8x to 15.9x. Code: https://github.com/sjtu-tcloud/MGSIC.

0.35

The Devil Is in the Reconstruction Loss Scale: Rethinking Optimization in LLM Quantization

cs.CL cs.AI ·2026-10-01 ·Chao Li, Shigeng Wang, Anbang Yao
code/data similarity 0.63
Abstract · Project page: https://github.com/IntelChina-AI/RMSE

Post-training quantization (PTQ) methods typically use sequential quantization that partitions a pre-trained LLM into a series of units (e.g., transformer blocks), with one unit quantized at each stage. State-of-the-art PTQ methods are predominantly learning-based, optimizing auxiliary quantization parameters (e.g., scaling factors, rotation matrices, clipping thresholds, and adapters) via gradient descent to minimize a reconstruction loss. A common practice is to use mean squared error (MSE) as the reconstruction loss function, yet its induced optimization behavior remains largely unexplored. In this work, we take a holistic view of sequential quantization and systematically investigate how optimization evolves from the first quantization stage to the last, aiming for a deep understanding of optimization in learning-based PTQ schemes. Through extensive empirical studies spanning representative learning-based PTQ methods, LLM families, model scales, architectures, quantization settings and various tasks, we consistently uncover Optimization Imbalance: reconstruction loss magnitudes vary dramatically across stages, accompanied by highly uneven gradient magnitudes and parameter updates under MSE. We term the cross-stage range of loss magnitudes the reconstruction loss scale, and reveal that MSE translates the unexpectedly large reconstruction loss scale into highly uneven gradient magnitudes, which in turn lead to uneven optimization strength across quantization stages. This finding suggests a general principle for improving learning-based PTQ: optimization strength across stages should be decoupled from the reconstruction loss scale. Theoretically, we show that root mean squared error (RMSE) variants defined at the sample, channel, token, and element levels naturally realize this principle through implicit gradient normalization, outperforming MSE significantly as a drop-in replacement.

0.34

HGA-Quant: Heterogeneity-Aware Quantization for AutoRegressive Visual Generation Models

cs.CV cs.AI ·2026-10-11 ·Xinmeng Liu, Xianglong Yan, Kaicheng Yang, Weisheng Dong, Yulun Zhang
code/datahot direction similarity 0.63
Abstract

Recently, AutoRegressive Visual Generation (ARVG) models have emerged as a competitive paradigm for high-quality image synthesis. However, their substantial computational and memory demands make them difficult to deploy on resource-constrained edge devices. Post-Training Quantization (PTQ) provides a promising solution to reduce the computational and memory costs of ARVG models, yet existing methods often suffer from substantial image quality degradation under low-bit quantization. In this paper, we propose a training-free PTQ framework for ARVG, consisting of Tail-Aware Bounded-init Grid Refinement (T-BGR) and Coarse-to-Fine Activation Precision Scheduling (CAPS). T-BGR introduces a tail-aware reconstruction objective for weight quantizer calibration, assigning greater importance to distribution-tail coefficients and preserving fine-grained information without introducing additional parameters or high-precision branches. CAPS performs coarse-to-fine activation precision scheduling by jointly considering the importance and computational cost of different generation stages, enabling efficient mixed-precision allocation under a given bit budget. Extensive experiments on multiple ARVG backbones demonstrate that our framework consistently improves robustness under aggressive low-bit quantization. Notably, on Infinity, our framework achieves near full-precision image generation quality at an effective W4A5.6 activation precision, while existing methods at W4A6 still exhibit noticeable quality degradation or inconsistent performance. Code is available at https://github.com/lxm-lc/HGA-Quant.

0.37