CS Paper Radar

Adapting a Vision Foundation Model for Fracture Characterization in Acoustic Image Logs

Guangyu Wang, Xiaodong Ma, Xinming Wu

cs.CV ·submitted 2026-11-10 11:04 UTC · v1

Abstract

Natural fractures (NFs) and drilling-induced tensile fractures (DITFs) in acoustic image logs provide insights into rock mass structure and in situ stress, but manual characterization is time-consuming. Deep learning can automate this task, although expert-labeled data are scarce. We investigate whether adapting a pretrained vision foundation model (VFM) outperforms task-specific models trained from scratch with limited annotations. Using 80 annotated acoustic image samples, we fine-tuned DINOv3, pretrained on satellite imagery, and evaluated it on four boreholes excluded from fine-tuning. The adapted model estimated NF and DITF parameters comparably to human interpretation. Relative to U-Net, YOLOv8, and Swin Transformer models trained from scratch, it yielded fewer false positives and negatives and more accurate fracture counts and orientations. However, its performance advantage generally narrowed as training sample size decreased. We also assessed decoder architecture, fine-tuning strategy, and image enhancement. A progressive upsampling decoder with full fine-tuning performed best among the DINOv3 configurations tested, while fracture-focused image enhancement did not consistently improve accuracy. These results demonstrate the potential of VFM adaptation for fracture characterization in acoustic image logs with limited labeled data and suggest a transferable workflow for other annotation-scarce geoscientific imaging tasks.

Closest papers

Nearest neighbours by meaning across the whole index.

A Seismic Foundation Model for Dense Feature Extraction

cs.CV ·2026-11-16 ·Zhixiang Guo, Xinming Wu, Yimin Dou, Hui Gao, Siyao Zhao +2 more
similarity 0.71
Abstract

Deep-learning-based seismic interpretation is constrained by scarce high-quality annotations, and most existing models are trained separately for individual tasks. We present SeisDFE, a 7B-parameter seismic foundation model for dense feature extraction, pretrained on 5.34 million 2D images derived from more than 500 seismic volumes. A three-stage pretraining strategy, combining discriminative self-supervised learning, Gram feature anchoring, and multi-resolution adaptation, improves feature discriminability while preserving spatial coherence. With its encoder frozen, SeisDFE supports seismic facies classification, salt detection, fault detection, and relative geologic time estimation. It outperforms existing seismic foundation models on all four tasks and a natural-image-pretrained model on all but fault detection, with the largest gains under scarce supervision: using only two annotated sections of the F3 dataset, it improves whole-volume mIoU by 12-19 percentage points over the baselines. The learned features remain effective with task-specific decoders and extend to synthetic-to-field transfer and sparse 3D geobody interpretation. These results show that large-scale seismic pretraining organizes geological information into dense representations that are directly reusable across interpretation tasks.

0.24

Automated Borehole Core Analysis with Report-Derived Weak Labels and Supervised Crack Segmentation

cs.CV ·2026-08-12 ·Usama Imdad, Ali Khan, Luke Lu, Zubair Khalid, Arif Mahmood
similarity 0.65
Abstract · 18 pages, 12 figures

Borehole archives commonly contain core tray photographs and corresponding digital log reports, but no native pixel-level crack annotations. We investigate two complementary approaches for extracting defect-spacing information from these archives. First, structured spacing categories recovered from the report text layer provide weak interval-level labels for classification. A DINO encoder trained on unlabeled core crops supplies domain-specific representations, and a manually verified subset is used to identify label inconsistencies. Second, we manually annotate 5,087 extracted core-row images and evaluate fully supervised crack-segmentation models. Our gated U-Net combines PiDiNet edge maps with Mask R-CNN masks through a learned spatial gating mechanism. This configuration achieves an F1 score of 0.860 and a crack-class IoU of 0.754, the highest result among the evaluated segmentation configurations. Deterministic post-processing converts predicted crack locations into defect-spacing categories. Separate rule-based branches estimate core-relative bedding angles and lithological color descriptors; their predictions agree with log-report references on 75.4% and 84.7% of 1,200 evaluated images, respectively. Because these references are extracted from existing reports, the reported values measure agreement with recorded geological observations rather than independent physical accuracy. The resulting framework combines report-derived weak supervision for spacing classification with fully supervised segmentation for image-based crack localization.

0.10

LoRA Enhanced Contrastive Learning with SAS Vision Transformers

cs.AI ·2026-09-17 ·Dan Zimmerman, Frank E. Bobe, Amelia L. McCormack, Matthew Cook, Gregory D. Vetaw
similarity 0.64
Abstract

Automatic target recognition (ATR) with synthetic aperture sonar (SAS) supports advanced naval capabilities, but deep learning is constrained by scarce target imagery, background clutter, and human-in-the-loop assessment. We adapt DINOv3 Vision Transformer (ViT) models to underwater SAS ATR using a three-stage parameter-efficient framework. Stage 1 uses Low-Rank Adaptation (LoRA) while freezing the ViT backbone, bridging the gap between natural-image pretraining and underwater acoustic propagation. Stage 2 uses hard-negative mining to strengthen the decision boundary against acoustic mimics, including rocks and sediment formations resembling man-made targets. Stage 3 uses Supervised Contrastive Learning (SupCon) to separate target and clutter representations. We evaluate at-sea SAS data using a mission-level geographic split, compare all arms at 85 percent test recall, and repeat each comparison over three random seeds. LoRA accounts for the primary effect, increasing area under the precision-recall curve (AUPRC) from 0.300 to 0.679 +/- 0.027 using the same frozen backbone. Rank 4 achieves this result while training only 0.26 percent of weights. Neither refinement stage exceeds its matched control: hard-negative mining changes AUPRC by -0.0045 +/- 0.0119 versus an equal-size random curriculum, and SupCon changes AUPRC by +0.0002 +/- 0.0096 versus the preceding stage. These null results indicate that mining occurred on data the encoder had already fit and that supervised stages had already imposed most target-clutter geometry. One efficient adaptation stage is sufficient; stacked refinement is not.

0.15

Inspect Any Crack: An Automated End-to-End Crack Segmentation and Severity Assessment Framework

cs.CE ·2026-10-09 ·Ghodsiyeh Rostami, Po-Han Chen, Mahdi S. Hosseini
similarity 0.62
Abstract

Image-based crack analysis is essential for automated infrastructure inspection to reduce the cost, subjectivity, and safety risks of manual surveys. Despite advances in visual crack detection, methods that translate predictions into physically meaningful and engineering-interpretable crack condition information remain limited. To bridge this gap, this study proposes Inspect Any Crack (IAC), an innovative end-to-end crack recognition and condition assessment framework that automatically derives physical geometric measurements and continuous severity scores from concrete-crack imagery. At its core, IAC introduces SACv2-Tiny, an efficient crack segmentation model adapted from a vision foundation model. Trained on the challenging OmniCrack30K dataset, SACv2-Tiny achieved a $62.49\%$ F1-score and $45.45\%$ IoU on the test set and a mean zero-shot F1-score of $69.89\%$ across three unseen datasets, demonstrating robust segmentation that enables downstream analysis with limited post-processing. IAC further processes the predicted masks to quantify physical crack width and affected area using ground-sampling-distance calibration. Validation at 41 caliper-referenced locations yielded a mean relative width error of $7.33\%$. Beyond geometric quantification, IAC introduces a novel continuous crack-condition metric, the Crack Severity Index (CSI), bounded on $[0,100]$, which combines maximum crack width and affected-area ratio into a unified, standards-informed severity measure. Through these developments, IAC advances crack inspection beyond pixel-level recognition toward interpretable and automated infrastructure condition assessment.

0.13

Should All Noises Be Treated Equally: Impact of Input Noise Variability on Neural Network Robustness

cs.LG eess.SPphysics.geo-ph ·2026-09-13 ·Salma Alsinan, Maksim Makarenko, Sixiu Liu, Ali Aldawood, Ibrahim Hoteit
published similarity 0.61
Abstract · Main:(pages 1-31,15 figures), Supplementary: (pages: 32-75, 37 figures)

Geophysical data collected from active field sites are often contaminated by complex and heterogeneous noise, obscuring weak seismic events, and complicating automated interpretation. Although deep learning offers promising solutions for seismic processing, its performance is highly sensitive to the nature of training noise, especially under out-of-distribution (OOD) conditions. This study investigates the influence of noise parameters, such as type, scale, and complexity on the performance, generalization and robustness of neural networks in two geophysical tasks: first break picking and denoising. We simulate seismic-while-drilling data and apply controlled input source noise augmentation using stochastic generators to vary the noise characteristics. Different neural networks are trained on fixed noise types and scales, then evaluated across both seen and unseen noise scenarios. We incrementally increase the complexity of the noise by introducing compound noise mixtures and assess the performance of the model under increasingly challenging OOD conditions. This yields a robustness matrix that captures the generalizability of each model relative to its training configuration. Results indicate that larger noise scales boost generalization, and that effective alignment between noise type, task complexity, and architecture is key for maximizing generalization gains. In addition, training with compound noises mitigate weaknesses associated with single-noise training, acting as an additional implicit regularizer to improving robustness. These findings highlight key factors influencing model resilience in noisy geophysical environments and offer guidance for developing deep learning models that generalize effectively across diverse and unpredictable noise conditions.

0.49

Deep Learning Volumetric Segmentation for Prediction of Cavity Geometry in Underground Jet Boring Mining

cs.CE ·2026-10-26 ·Giovanni Zingaro, Yuan Wang, Deepak Meena, Peter Cheng, Russell Buchanan +2 more
similarity 0.61
Abstract

The Jet Boring System (JBS) is a proprietary technology developed by Cameco Corporation to extract high-grade uranium ore at the Cigar Lake Mine in Northern Saskatchewan, Canada. The JBS remotely excavates ore using a high-pressure water jet that cuts cavities within an artificially frozen ore body. This study outlines a Deep Learning (DL)-based workflow that formulates the cavity prediction problem as a volumetric binary semantic segmentation task. A preprocessing pipeline assembles drilling and jetting records, cavity scans, and a mine-wide geology block model onto a common voxel grid, where each voxel in the prediction is labelled as consumed or non-consumed during jetting. A three-dimensional U-Net with a backfill residual branch is trained on historical field cavities. The model is benchmarked against a baseline consisting of a cylindrical cavity centered along the pilot hole, with a diameter defined by domain experts. The proposed workflow achieves an IoU of 0.601 $\pm$ 0.088 and an F$_1$-Score of 0.747 $\pm$ 0.077 on a held-out test set, improving on the cylindrical baseline currently used in cavity planning by 22.4% and 14.7%, respectively. An eXplainable Artificial Intelligence (XAI) feature attribution approach is applied to identify the most influential input driving the predicted cavity geometry. The accuracy of the proposed model demonstrates its potential to support mine planning.

0.29

DINO-A: Adapting Self-Distillation Vision Transformers to General Audio Representation Learning

cs.SD ·2026-08-11 ·Tomasz Radzikowski, Mateusz Modrzejewski, Przemysław Rokita
similarity 0.61
Abstract

We present DINO-A, an adaptation of self-distillation from vision to general audio representation learning. While DINO has become a canonical method in self-supervised vision and prior audio work has explored latent prediction (BYOL-A) and masked modeling (Audio-MAE, BEATs), no prior work has brought canonical DINO to general audio classification in the way BYOL-A brought BYOL. DINO-A retains DINO's multi-crop, EMA teacher, and high-dimensional projection, replacing only the input modality and augmentations with log-mel spectrograms and the BYOL-A v2 augmentation block. We pretrain three backbones, two Vision Transformers with 8x8 and 16x16 patches and a convolutional encoder, on FSD50K and evaluate them with linear probing on ESC-50, Speech Commands v2, UrbanSound8K, and GTZAN. Three findings characterize the resulting representations. Patch resolution within the Vision Transformer family has consistent effect on representation quality, with smaller patches winning across all four tasks. The choice between Vision Transformer and convolutional backbone interacts with task type: convolutional networks lead on speech while Vision Transformers lead on environmental sounds and music. Under identical pretraining and evaluation conditions, DINO-A and BYOL-A v2 differ by 11.96 percentage points on average, and we trace this difference to two mechanisms: the interaction between DINO's high-dimensional projection space and FSD50K's limited scale, and the additional cost of multi-crop augmentation, which DINO uses but BYOL-A v2 does not. The high-dimensional projection space, central to DINO's success in vision, becomes a liability at FSD50K scale.

0.04

Ranking Competing geologic interpretations via foundation-model-assisted generative hydrologic inversion

cs.LG ·2026-09-17 ·Harun Ur Rashid, Daniel O'Malley
benchmark similarity 0.61
Abstract

High-consequence subsurface decisions often rely on sparse data that permit competing geological interpretations. Determining consistency of these interpretations with the available observations remains challenging. We present a workflow that addresses this challenge by translating competing geologic interpretations into alternative priors and ranking them according to their consistency with hydraulic-head observations. A key step in this workflow is exploiting the broad knowledge of image-generation foundation models to transform nuanced geologic interpretations into data ready for computer modeling. For each interpretation, a text-to-image foundation model generates an ensemble of geologic images, and a separately trained variational autoencoder learns an interpretation-specific latent representation. A supervised inverse network maps head observations into this latent space, and the frozen decoder reconstructs an image that is mapped to a log-conductivity field. Steady-state flow simulations predict heads, and the aggregate normalized head error determines the ranking. We evaluate the framework using a synthetic benchmark based on the Johansen Formation with three interpretations of decreasing consistency with the reference geology. Across 595 test cases, the Precise \& Accurate interpretation produces lower normalized errors than Accurate in 58.5\% of cases and Mismatched in 82.5\% of cases. Accurate outperforms Mismatched in 65.5\% of cases. We then compare spatial representations of two published conceptual models of the Culebra Dolomite Member at the Waste Isolation Pilot Plant. The revised representation yields an aggregate normalized error of 7.598, compared with 8.595 for the original, consistent with the documented conceptual-model revision. The framework enables quantitative comparison of competing geological interpretations using available hydraulic observations.

0.29