CS Paper Radar

CAppleNet: A Coordinate Attention-Based YOLO11 for Real-Time Apple Stem Cavity and Calyx Detection

Alican Güneş, Robert Selim Hill, Gökhan Hasanoğlu, Murat Kurt

cs.CV cs.AI ·submitted 2026-11-10 11:08 UTC · v1

Abstract

Automated fruit grading, sorting, and orientation systems require real-time, accurate detection of fruit-level morphological landmarks rather than the fruit boundary alone. This paper presents a custom, fully self-collected and self-annotated dataset of 1506 apple images (1054 training, 301 validation, 151 test) captured under controlled, fixed-camera conditions and annotated for three target classes: fruit body, stem cavity, and calyx. A YOLO11s detector trained with default hyperparameters is adopted as the baseline, and a systematic, one-factor-at-a-time ablation study is conducted across input resolution, data augmentation policy, optimizer configuration, and lightweight architectural enhancement to identify the factors that most improve detection of these fine-grained landmarks under high inter-cultivar color and texture variability. Neither increased input resolution, nor any of six tested augmentation variants, nor manual optimizer tuning improved on the untuned baseline (F1 = 0.9047); only a same-slot architectural substitution of the backbone's C2PSA block with Coordinate Attention (CA) matched the baseline's overall F1 (0.9038) while reducing parameter count by 10.2% and achieving the study's best mAP@0.5 (0.935) and best stem-cavity F1 (0.8217). A confidence-threshold sweep identified 0.15 as the deployment operating point for this model, and a confirmatory experiment combining the CA-swap architecture with the best-performing augmentation variant showed the two effects do not combine additively, reversing the architectural gain rather than compounding it. The resulting design recommendations --- the CA-swap architecture alone, at a 0.15 confidence threshold --- target real-time apple landmark detection for orientation-aware industrial sorting and alignment systems.

Comment
19 pages, 6 figures, 15 tables

Closest papers

Nearest neighbours by meaning across the whole index.

A Lightweight Multimodal Vision-Language Framework for Early-Stage Anatomical Green Fruit Classification in Commercial Orchards

cs.CV cs.AI ·2026-08-23 ·Ranjan Sapkota, William Bu, Chen Chen, Yunjun Xu, Manoj Karkee
code/datahot direction similarity 0.69
Abstract

Accurate identification of early-stage apple fruitlet anatomical structures, including the calyx, fruitlet body, and peduncle, is essential for robotic thinning, crop-load management, and other precision orchard operations. This study presents a lightweight multimodal vision-language framework that adapts TinyCLIP for fine-grained fruitlet anatomy classification in complex orchard environments. A dataset of 600 high-resolution RGB images collected from Scilate and Scifresh apple orchards was converted into 224 x 224 image patches and annotated for three anatomical classes. Domain-specific language prompts, such as ``a photo of a class,'' were used to guide multimodal alignment between orchard imagery and horticultural structures. A sliding-window inference strategy with a stride of 112 pixels aggregates patch-level predictions into spatial heatmaps, enabling interpretable whole-image localization of fruitlet components relevant to robotic thinning. Patch-level evaluation on an NVIDIA T4 GPU achieved F1-scores of 0.95 for calyx, 0.98 for fruitlet, and 0.85 for peduncle, with a macro-F1 score of 0.93. Deployment-oriented optimization using ONNX and TensorRT enabled efficient inference on NVIDIA Jetson hardware, preserved accuracy under INT8 quantization, and supported model sizes of approximately 127-137 MB with millisecond-level patch inference. These results demonstrate that lightweight vision-language models can provide interpretable and edge-deployable perception for automated fruitlet analysis and future robotic thinning systems. The source code and implementation details are publicly available at https://github.com/WilliamBu1/A-Lightweight-Vision-Language-Model-for-Early-Stage-Fruitlet-Classification-in-Apple-Orchards.

0.40

Optimizing YOLO27, YOLO26, YOLO11, and YOLOv8 for Fine-Grained Small-Object Detection and Segmentation in Complex Orchard Environments

cs.CV ·2026-08-23 ·Ranjan Sapkota, Manoj Karkee
benchmarkcode/data similarity 0.69
Abstract

This study presents an architectural and experimental cross-generation analysis of Ultralytics YOLO27 (YOLOv27), YOLO26 (YOLOv26), YOLO11 (YOLOv11), and YOLOv8 for fine-grained robotic perception in complex orchard environments. Fine-grained detection and instance segmentation of early-stage fruit anatomy remain challenging in complex orchard environments because of limited pixel footprints, green-on-green similarity, occlusion, and substantial scale variation. Because YOLO27 has been announced but its public implementation and trainable segmentation models are not yet available, the present study provides an architectural analysis of YOLO27, while controlled experiments benchmark YOLOv8, YOLO11, and YOLO26; YOLO27 experiments will be incorporated following public model availability. Five model scales-nano (n), small (s), medium (m), large (l), and extra-large (x)-were evaluated for fruitlet, calyx, and peduncle detection and segmentation using conventional 640 x 640 and small-object-focused 960 x 960 configurations, yielding 30 experiments. YOLO11s-960 achieved the highest observed mask mAP@50:95(0.402) and box mAP@50:95(0.426), whereas YOLO26s-960 achieved comparable values of 0.397 and 0.425 with only 10.37~M parameters and 34.1~GFLOPs. Peduncle remained the most challenging class, and increasing model capacity did not consistently improve accuracy. Overall, compact-to-moderate YOLO models combined with small-object-focused training provided favorable accuracy-efficiency trade-offs, establishing a reproducible benchmark for fine-grained agricultural robotic perception. Code, trained models, and experimental configurations are publicly available, and will be updated through our Github Link: https://github.com/rnjnspkt/Optimizing-and-Comparing-Ultralytics-YOLOv26-YOLOv11-and-YOLOv8-for-Small-Object-Detection-and-Seg

0.63

SegAnyFruit: Learning Generalizable and Edge Deployable Fruit Instance Segmentation at Scale

cs.CV ·2026-11-19 ·Yanan Wang, Yuzheng wang, Yibin Ying, Zhenghao Fei
similarity 0.64
Abstract · 11 pages, 6 figures

Deploying fruit instance segmentation in real agricultural settings requires generalizing across unseen species, orchards, and imaging conditions under strict onboard compute and annotation budgets. We introduce SegAnyFruit (SAF), a data construction and progressive training framework that distills foundation-model priors into lightweight, prompt-free segmenters. SAF combines generic mask pre-training, broad mid-training on automatically annotated web imagery from our curated WebFruits dataset, and human-verified agricultural refinement post-training on PaperFruits, together spanning 733K images and 9.66M whole-fruit masks across 165 fruit types. Across seven benchmarks, zero-shot SAF-RF-DETR-XL reaches 69.06 average mask AP50:95 (+4.76 over SAM 3) while remaining deployable on edge devices. SAF initialization also boosts few-shot to full-shot adaptation across five agricultural domains while mitigating catastrophic forgetting. Finally, we systematically analyze training stages, data scale, model capacity, and generative augmentation, and validate our pipeline's transferability to underwater, cell, and human segmentation. We will release our datasets, code, and SAF models.

0.27

Towards Practical Precision Agriculture: Real-Time Fruit Detection and Video Analytics on Embedded Edge Hardware

cs.CV ·2026-09-11 ·Ivica Dimitrovski, Vlatko Spasev, Ivan Kitanovski, Petre Lameski, Dane Boshev
similarity 0.64
Abstract

Static-image benchmarks do not capture the computational and temporal requirements of practical orchard video analytics. This study presents an end-to-end framework for real-time fruit detection, tracking, and counting on the NVIDIA Jetson Orin Nano Super. A lightweight YOLO26s detector is trained independently on four public datasets representing apples, mangoes, blueberries, and strawberries under a common protocol. The models are deployed on embedded platform using PyTorch and TensorRT at FP32, FP16, and INT8 precision. APPLE MOTS is then used for temporal video analytics because it provides orchard sequences with persistent fruit identities, enabling evaluation of multi-object tracking and unique-fruit counting. The selected FP16 TensorRT detector is integrated into an NVIDIA DeepStream pipeline combining hardware-accelerated decoding, ByteTrack tracking, and motion-aware line-crossing analytics. Across the four detection tasks, mean test mAP@50:95 ranges from 0.4957 to 0.8656. On the Jetson, TensorRT FP16 achieves 66.76-74.56 images/s at 13.41-14.98 ms prediction latency, while reducing mAP@50:95 by only 0.0020-0.0054 and gross energy consumption by approximately 64-66% relative to PyTorch FP32. The complete detector-tracker-analytics pipeline reaches 44.96-54.11 FPS and sustains the configured 30-FPS input rate without output-frame loss. On held-out orchard video sequences, HOTA ranges from 0.345 to 0.538, event-level counting F1 from 0.611 to 0.803, and relative count error from 6.2% to 51.6%. Performance varies across acquisition geometries: near-lateral row viewing yields the most stable tracking and counting, whereas forward traversal remains association- and recall-limited despite spatially adaptive counting geometry. These results show that practical edge-based fruit monitoring requires efficient detection and acquisition geometries that support reliable temporal association.

0.17

A Lightweight Phenology-Aware YOLOv5 Framework for Tomato Growth Stage Detection in Resource-Constrained Bhutanese Greenhouse Environments

cs.LG ·2026-08-30 ·Sherab Gocha, Sou Nobukawa
published similarity 0.62
Abstract

Accurate detection of tomato growth stages is essential for stage-specific greenhouse management and precision agriculture. In Bhutan, greenhouse cultivation is affected by altitude variability, large diurnal temperature fluctuations, diffuse illumination, limited automation, and a scarcity of locally annotated datasets, limiting the applicability of conventional deep learning models. This work proposes Pheno-Lite + Efficient Channel Attention (ECA), a lightweight, phenology-aware object detection architecture derived from Ultralytics YOLOv5 for tomato growth stage recognition. A balanced dataset of 2,464 annotated images was constructed from locally collected greenhouse images in Bhutan and publicly available tomato images, with augmentation designed to simulate local greenhouse conditions. The dataset includes vegetative (820), flowering (824), fruiting (820), and background (26) samples. The proposed architecture introduces two customized backbone modules: C3 PhenoLite, which enhances spatial and texture feature extraction using depthwise residual refinement, and C3 ECA, which strengthens inter-channel feature interactions through efficient channel attention. The proposed model achieves 90.6% precision, 88.8% recall, and 92.6% mAP@50, with 4.0 million parameters and 10.9 GFLOPs at 640 x 640 resolution. These results demonstrate its potential for real-time and climate-resilient greenhouse deployment in Bhutan.

0.22

Multi-Scale Fruit Capsules: Dilated Convolutions and Dynamic Routing for In-the-Wild Explainable Fruit Recognition

cs.CV ·2026-08-20 ·Subhankar Chattoraj, Sawon Pratiher, Samiran Das, Hubert Konik
published similarity 0.61
Abstract · Accepted in IEEE Industrial Electronics Conference (IECON) 2026

The same fruit appears in a bunch, unpicked, peeled, bagged in plastic, or sliced on a dish, so automated fruit classification in the wild (AFCW) must absorb wide intra- class and narrow inter-class variability in shape, size, colour and texture. Convolutional networks route information through pooling, which discards the pose and location of the region of interest and therefore generalises poorly across these presentations. We propose FruitCapsNet, a capsule network whose Fruit Capsules replace the standard convolutional front end with dilated convolutions: the receptive field grows exponentially at constant parameter cost, so each capsule encodes multi-scale context before dynamic routing resolves part whole spatial agreement. Hyper-parameters, including the dilation factor, are selected by Bayesian optimisation rather than grid search. On three public datasets (SMP, FruitsGB, Fruits-360) and a new 19-class, 10,639-image in-the-wild dataset (PD-19), FruitCapsNet exceeds ten fine-tuned transfer-learning backbones at one-third the depth, with the largest margin (+2.7% over the nearest competitor) on the hardest set. Grad-CAM saliency propagated from the DigitCaps layer shows that the improvement comes from attributing decisions to whole-fruit regions rather than to object edges, giving post-hoc evidence that the gain is not a dataset artefact.

0.22

Multibranch Ensemble Head in Vision Foundation Models for Efficient Cucumber Phenological Stage Classification

cs.CV ·2026-10-27 ·Kostiantyn Khabarlak
similarity 0.60
Abstract

Vision Foundation Models (VFMs) pretrained with self-supervised learning, such as DINOv2, provide highly transferable features, yet adapting them to small, domain-shifted datasets is still challenging. We propose a regularizing multibranch ensemble head: a training and inference scheme that pairs low- and high-capacity branches, samples a single branch stochastically at each training step, and averages both branches in probability space at inference. The design adds negligible parameters and essentially no inference overhead over a single heavy head, while improving the accuracy-efficiency trade-off under data-scarce conditions. Accurate classification of plant growth stages is critical for precision agriculture, enabling timely decisions on fertilization, irrigation, and harvesting. Therefore, as a challenging practical case we use cucumber phenological stage classification, in which flowers and fruits are frequently occluded by foliage, and stage transitions manifest primarily as subtle changes in leaf morphology. The NALEF Food Safety dataset contains images of five cucumber growth stages captured under diverse real-world conditions. On it we evaluate a broad range of backbones, including DINOv2 and DINOv3 ViT and ConvNeXt variants, against strongly supervised counterparts (ResNet, EfficientNet, ViT). The proposed DINOv2 ViT-S with multibranch head achieves a Macro F1 of 0.978 and Cohen's Kappa of 0.971, matching the performance of models more than ten times larger in parameters and GFlops, while requiring only 12.2 GFlops and 22.3M parameters, making it deployable on smartphones and edge devices for phenological stage classification.

0.28

Event-Triggered Visual Perception for Real-Time Harvest Outcome Estimation in Mechanical Blueberry Harvesting

cs.CV ·2026-11-16 ·Nicolas Miroslav Husár, Jelle Driessen, Petra Bosilj, Başak Sakçak
similarity 0.60
Abstract

Mechanical blueberry harvesting requires a balance between removing ripe fruit and avoiding premature removal of unripe berries that could remain on the bush for a later harvest. However, operators generally lack real-time information about the maturity composition of the fruit being collected. This study develops an event-triggered machine-vision system that measures the maturity of harvested blueberries directly on the harvester. When a filled crate is moved by the machine, an RGB image is automatically captured and analysed using a three-class detector that identifies ripe, semi-ripe, and unripe berries. The system operates locally on the existing CPU-only industrial computer and therefore requires neither continuous image processing nor dedicated GPU hardware. During field testing, 79 crate images containing 48,634 visible blueberries in manually verified reference annotations were evaluated. The vision system estimated an overall ripe-fruit fraction of 90.22%, compared with 90.97% determined manually. Per-image ripe-fruit estimates showed a mean absolute error of 0.935 percentage points and a Pearson correlation of r=0.967. Maturity estimates remained similar between the two sides of the harvester for which the light conditions varied despite poorer absolute counting performance under direct sunlight. All field events were processed within the available 14 s per-side crate interval. The proposed approach provides a practical means of quantifying one component of harvest selectivity while the machine is operating. Such information could support operator decision-making and, when combined with measurements of fruit recovery and losses, contribute to future feedback-based control of mechanical harvesting.

0.23