CS Paper Radar

EngineAgent: Agentizing On-Device LLM Inference Engines with Inference Stack Hierarchy Awareness and Hardware Abilities

Zhengxiang Huang, Yujie Sun, Shengheng Chen, Zhaode Wang, Chaoyue Niu, Zeyu Zhao, Chengfei Lv, Fan Wu, Guihai Chen

cs.OS cs.AIcs.CLcs.SE ·submitted 2026-11-10 17:16 UTC · v1

Abstract

Rapidly evolving LLM architectures and heterogeneous mobile hardware make supporting new models in on-device inference engines a recurring and costly system challenge. Each model may require coordinated changes across conversion, graph construction, operators, and hardware backends. Existing coding agents often miss these cross-layer dependencies and struggle to diagnose failures across host--device execution paths. We present EngineAgent, an agentic system for automating on-device LLM model enablement. Its key insight is to separate reusable engine and hardware knowledge from model-specific implementation. Before enablement, EngineAgent constructs a hierarchy-aware engine index that captures engine abstraction layers and cross-layer dependencies, and pre-validates backend-specific build, execution, and debugging workflows using already supported models. For each new model, a builder uses this knowledge to coordinate cross-layer changes, while an auditor checks implementation completeness and drives iterative debugging through device-side validation. Across 12 tasks spanning three mobile LLMs and four engine--backend pairs on CPUs, GPUs, and NPUs, EngineAgent achieves 75% end-to-end success with either of two underlying LLMs, versus 33.3% for the strongest coding-agent baseline. Success requires compilation, on-device execution, and output-logit agreement with reference implementations. EngineAgent also reduces average per-task time and model-API cost relative to baselines using the same underlying LLMs.

Closest papers

Nearest neighbours by meaning across the whole index.

SchemaWeaver: Accelerating On-Device Mobile Agentic AI via Schema-Guided Parallel LLM Decoding

cs.AI ·2026-10-12 ·Boyuan Yang, Wei Gao
similarity 0.74
Abstract · 16 pages, 14 figures

Large language models (LLMs) on mobile devices can act as agents that call external software tools to complete complex tasks, but the major challenge of supporting on-device mobile agentic AI with LLMs is the long latency of LLM tool calling on mobile devices. In particular, the decode phase is the main contributor of such long latency, but is hard to speed up on mobile processors as it is bound by memory bandwidth rather than compute power. To address this limitation, in this paper we present SchemaWeaver, a new on-device mobile agentic AI technique that enforces schema-guided parallel decoding in the decode phase of LLM tool calling, to reduce its latency by producing multiple tokens in each decode pass. SchemaWeaver can be generically applied to the LLM inference engine on mobile devices without involving any training efforts or changes on LLMs, and our experiment results on major mobile SoCs and LLM families show that SchemaWeaver can reduce the LLM tool calling latency by up to 3.9 times, compared to the competitive baselines.

0.12

AgentDP: Towards Automated Model Deployment for Heterogeneous Embedded AI Applications

cs.AI ·2026-10-22 ·Leming Shen, Qiang Yang, Xinyu Huang, Zijing Ma, Yuanqing Zheng
similarity 0.73
Abstract

This paper presents AgentDP, which aims to deploy pre-trained AI models on heterogeneous embedded devices by fully automating model optimization and adaptation (O&A) with Large Language Model (LLM) agents. AgentDP not only significantly reduces human effort via automation but also enhances model inference efficacy by integrating LLMs with device-specific domain knowledge. To deliver a robust automation framework, AgentDP develops novel solutions to address three key technical challenges: 1) To help users elicit clear requirements, we propose a user requirement standardization module; 2) To mitigate the execution environment mismatch between AI models and heterogeneous embedded devices, we design an operator-aware model partition paradigm that enables different parts of the model to be efficiently executed on distinct inference engines. 3) To avoid re-searching optimization hyperparameters for new tasks, we propose a configuration reuse module that heuristically retrieves previous hyperparameter configurations for efficient reuse. Extensive experiments demonstrate that by fully automating the entire O&A process, AgentDP reduces entire model adaptation time by up to 80% compared with manual O&A while achieving higher task accuracy (more than 13% on average) than the baselines. Additionally, a comprehensive user study also exhibits the robust generalizability of AgentDP in adapting to different user requirements for heterogeneous embedded devices.

0.14

Building Fully On-Device GUI Agents with Mobile NPUs

cs.AR ·2026-11-16 ·Zhe Dong, Guanyu Cai, Yuchen Jiang, Jiliang Wang
similarity 0.71
Abstract

Mobile GUI agents are increasingly used to automate everyday smartphone tasks, but most existing systems still rely on cloud-hosted models or remote inference, introducing repeated communication latency, privacy exposure, and dependence on network availability. Modern smartphones integrate neural processing units (NPUs) that provide an attractive substrate for fully on-device LLM inference. However, directly deploying conventional GUI-agent pipelines on mobile NPUs is inefficient. GUI-agent inference is fundamentally a long-input, short-output workload, yet conventional agents spend substantial time on autoregressive reasoning and action generation, while mobile NPUs provide much higher throughput for prompt prefill than token-by-token decoding. Meanwhile, dynamically varying GUI-agent contexts conflict with the fixed context profiles required by statically compiled NPU runtimes. We present DroidPrefill, a prefill-centric inference architecture that reshapes the GUI-agent workload around mobile-NPU execution. DroidPrefill combines Prefill-Centric Inference to reduce unnecessary autoregressive decoding with Efficient Context Management to preserve decision-critical information within a fixed compiled context budget. Experiments on commercial smartphones show that, in controlled comparisons with the autoregressive T3A+ baseline, DroidPrefill reduces per-step inference latency by up to 85.0%, while improving task success rate by up to 24.6%.

0.18

EdgeAgent: Orchestrating On-Device LLM inference for End-User Multi-Agent Systems on CPU-GPU Unified Memory Architectures

cs.DC cs.MA ·2026-10-02 ·Yuhai Long, Yuanxin Wei, Kai Wu, Jinhui Wei, Dan Huang +1 more
top venue similarity 0.70
Abstract

Emerging multi-agent LLMs demand privacy-preserving edge deployment, yet current inference systems struggle with these collaborative workflows. Specifically, the memory-bound decode phase causes severe bus contention on unified memory architectures (UMA), paralyzing naive CPU-GPU co-execution. Furthermore, speculative decoding in multi-agent workloads faces extreme variance in drafting difficulty, alternating between complex reasoning and predictable structured generation. Compounded by frequent tool-induced stalls, this highly fragmented execution severely underutilizes hardware and defeats traditional static batching. We present EdgeAgent, a cross-layer inference system explicitly co-designed for edge UMA and multi-agent workloads. At the micro-architectural level, it bypasses rigid graph-compiler constraints to enable zero-copy UMA-aware tensor parallelism, utilizing asymmetric memory layouts to fully saturate both CPU and GPU compute units. At the scheduling level, it dynamically allocates draft budgets based on real-time sequence predictability to bound bandwidth waste. Concurrently, an asynchronous suspend-and-yield mechanism actively evicts stalled agents, ensuring continuous hardware saturation during unpredictable tool invocations. Extensive evaluations on an Apple M4 SoC demonstrate that the UMA-aware execution alone contributes a 1.29x speedup over batched speculative decoding. Adding the agent-aware scheduling lifts the full EdgeAgent system to a 1.77x speedup under extreme tool-use latencies.

0.59

AIPC: Evidence-Guided Agent Workflows for PyTorch Project Deployment

cs.SE cs.AIcs.LG ·2026-10-26 ·Zhanwei Wu, Jianhao Su, Brian Zhang, ShengTing Huang, Weidong Feng +9 more
similarity 0.70
Abstract

Deploying and optimizing a PyTorch inference project on a dedicated accelerator, especially an on-device NPU, requires more than using a framework device API as with CUDA. The project must be converted into hardware-runtime artifacts and adapted to the target toolchain and application interface. Differences in model formats, quantization flows, operator support, and toolchain interfaces create cross-layer problems spanning PyTorch/ONNX models, toolchains, runtimes, and device execution. LLM Agents can invoke tools to address such problems, but may drift because of insufficient domain knowledge, large configuration and repair spaces, or poor path selection. We propose AIPC (AI Porting & Conversion), an Agent method for deploying PyTorch inference projects. AIPC combines structured Skills with toolchain, runtime, and profiling evidence to drive cross-layer diagnosis and repair, organizing model adaptation, artifact building, on-target execution, accuracy repair, and performance optimization into one deployment flow. We evaluate AIPC on the on-device NPU path of Qualcomm QAIRT across vision, speech, LLM, and diffusion models. In two optimization cases, 6/7 Skill-arm Whisper-Small runs meet predefined accuracy and latency criteria versus 0/6 control runs, while YOLO-Worldv2 achieves a 2.791x end-to-end speedup versus 1.599x for the control. Under a pre-fixed deployment contract, Skill, tool permissions, and check conditions, some runs achieve zero in-run human intervention (0-HITL). We also examine Qwen3.8-27B as a locally deployable model for driving an Agent workflow.

0.06

Benchmarking AI Agents for Hardware Design Automation via MCP Tool Calling

cs.AI cs.SE ·2026-08-25 ·Leonardo Liparulo, Francesco Pierri
top venuebenchmarkcode/data similarity 0.70
Abstract

We ask whether AI agents powered by locally deployed large language models can reliably automate expert-defined hardware design workflows in an industry-realistic tool-calling setting. In these environments, engineers issue repetitive, dependency-ordered operations---such as creating components, adding ports, and wiring connections---through specialised tools. Confidentiality constraints on component specifications and naming conventions often preclude hosted proprietary APIs, motivating the use of locally deployed models. To study this setting, we build a Model Context Protocol (MCP) server that reproduces the state and dependency logic of a proprietary hardware design tool used in embedded system development and construct a benchmark covering single-operation edits, multi-step dependency chains, invalid requests, misspelled prompts, and multi-server tool contexts. We evaluate seven open-source models comparing pipeline choices including system prompts, tool-description detail, context scope, and single-agent versus multi-agent architectures. Results show that strong models can achieve near-complete expected-call coverage on the benchmarked workflows, but reliability depends strongly on both task structure and agent configuration. Comprehensive tool descriptions consistently reduce failures, few-shot prompting can cause severe inaction for some models, cumulative context harms constrained models, and multi-agent decomposition helps weak workers or long sessions at the cost of additional calls. These findings provide practical guidance for deploying local LLM agents in stateful hardware design environments.

0.47

LLM-based Hardware Development with Hierarchical IRs and End-to-End Multi-Agent Workflow

cs.AR cs.MAcs.SE ·2026-08-31 ·Chenyang Yin, Agasthi Haputhanthri, Aditya Anirudh Jonnalagadda, Zhenyu Bai, Yuanming Song +5 more
benchmark similarity 0.70
Abstract · 10 pages, 5 figures

Large language models (LLMs) are increasingly used in software development, but their use in complex hardware design remains limited. This gap stems from both the scarcity of public hardware training data and the fundamentally different methodologies used in hardware design. In particular, applying LLMs to hardware requires more than direct RTL generation: the model must understand module boundaries, inter-module connections, and verification requirements. In this paper, we present an LLM-based hardware development framework with hierarchical intermediate representations (IRs) and an end-to-end multi-agent workflow. The core idea is to provide an abstraction of hardware design to LLMs through two structured IRs: Architectural Sketch, which captures module topology and interconnection, and Operational Specification, which defines per-module functionality and interfaces. Our framework uses these IRs to decompose a complex design into sub-modules, specify the per-block functionality, and derive how each module should be tested and verified. We incorporate a multi-agent debug loop in the framework, allowing agents to get the error feedback and control the debug details such as the signals to be probed for simulation. We evaluate our framework on Verilog-Eval benchmark, achieving a pass@5 rate of 95.5%, which surpasses current state-of-the-art LLM generation frameworks. To better assess performance on complex, realistic designs, we introduce a new case study spanning applications from general-purpose processors to digital signal processing systems. Experimental results indicate that such complex designs exceed the capabilities of existing approaches, whereas our framework is the only one capable of producing functional end-to-end design. Our generated RTL follows all industry-standard design rules, is lint-clean, functionally correct and fully synthesizable.

0.17

MAServeBench: Benchmarking Multi-Agent LLM Serving Systems with Hierarchical Collaboration Workloads

cs.MA ·2026-10-29 ·Shengxuan Qiu, Haochen Huang, Shuzhang Zhong, Zizhuo Fu, Zebin Yang +1 more
benchmarkcode/data similarity 0.69
Abstract

Large language model (LLM)-based multi-agent systems (MAS) coordinate specialized agents to solve complex tasks, turning each user request into interdependent model and tool operations. Unlike independent requests, these operations become ready at different times and consume evolving context as agents coordinate and exchange results. This creates changing patterns of concurrency, computation, and memory demand that can expose different bottlenecks in LLM serving hardware. Yet benchmarking these effects requires capturing the collaboration rules that generate serving workloads, beyond the requests observed during execution. We present MAServeBench, a benchmark that treats multi-agent collaboration as a configurable dimension of serving workloads for LLM serving and hardware evaluation. Its composable stages capture how agents coordinate and exchange context in documented MAS workflows, enabling native executions to generate different workloads even when task inputs and tools remain unchanged. Hierarchical Semantic Traces preserve realized operations and dependencies for reproducible fixed-work replay and as inputs to architecture simulators. Task-linked measurements connect these workloads to serving execution and GPU/NPU hardware behavior, revealing why serving efficiency does not always translate into timely task completion. The benchmark code is available at https://github.com/ShengxuanQiu/MAServeBench.

0.35