CS Paper Radar

Beyond Yes or No: Grading Observability of Power System Dynamic States with Symbolic Coefficients

Akhila Kandivalasa, Marcos Netto

eess.SY ·submitted 2026-11-11 01:28 UTC · v1
unusual

Abstract

Graph-based observability analysis runs in seconds where Lie-derivative tests take hours, but it answers only one question: is the system observable or not. It cannot say how well a given set of measurements supports state reconstruction. This paper extends the graph-based approach with symbolic observability coefficients computed from a symbolic Jacobian of the state-space equations, in which every dependency is classified as constant, nonlinear polynomial, or rational. We show that the coefficient tracks the analytical observability determinant of the Lie-derivative approach: it is zero when the determinant vanishes, lies strictly between zero and one when the determinant depends on the state, and equals one when the determinant is a nonzero constant. We apply the method to a seven-state synchronous machine and to the 21-state Western System Coordinating Council nine-bus system under several synchrophasor measurement configurations. On the nine-bus system, the coefficient grows from 0.0952 with one PMU to 0.1905 with two and 0.2857 with three, and the whole analysis runs in under five seconds. Configurations with the same number of PMUs receive the same coefficient, yet an unscented Kalman filter estimates the states with different accuracy for each. The symbolic coefficient therefore grades measurement sets beyond identifying root strongly connected components, while telling PMU locations apart still requires the numerical parameters of the system.

Closest papers

Nearest neighbours by meaning across the whole index.

Compositional Data-Driven Small-Signal Stability Assessment of Power Systems via Output Differential Passivity

eess.SY ·2026-11-16 ·Peng Yang, Xiaohui Zhang, Xi Ru, Feng Liu
similarity 0.52
Abstract · 14 pages

This paper proposes a compositional data-driven small-signal stability assessment framework for interconnected power systems based on output differential passivity (ODP). Without requiring explicit device models, local ODP matrices and scalar indices are estimated directly from measurement trajectories. When internal states are available, trajectory-based linear matrix inequalities (LMIs) are constructed from input-state measurements to estimate the local ODP matrices and scalar indices. When internal states are unavailable, an extended-state representation is constructed from input-output measurements, enabling the same assessment using only external signals. The estimated ODP matrices are combined with the network coupling matrix for compositional assessment of power system stability, while their scalar indices enable decentralized assessment. To address the computational and numerical challenges of trajectory-based LMIs, we introduce right-inverse whitening (RIW) to remove redundant behavioral coordinates and improve computational efficiency, and apply instrumental-variable (IV) preprocessing to alleviate numerical ill-conditioning and mitigate noise effects. Case studies on a modified IEEE 39-bus power system show that ambient measurements satisfy the required informativity conditions and that both formulations yield estimates close to model-based references under the tested noise levels. The reusable local ODP estimates also enable modular stability reassessment after controller updates.

0.30

Uniform observability criteria for linear time-varying systems

eess.SY math.OC ·2026-10-25 ·Soulaimane Berkane
similarity 0.50
Abstract · 17 pages including a technical-report cover, 2 figures

Verifying uniform observability of a linear time-varying system generally requires its state-transition matrix. This paper develops necessary and sufficient conditions that can be checked directly from the coefficient matrices for two classes of systems. For constant dynamics with real spectrum and a measurable, essentially bounded output matrix, uniform observability is equivalent to persistent excitation of the output matrix on each eigenspace. An equivalent condition requires persistent excitation of the Kalman observability stack. The second result concerns cascades with a constant observable measured subsystem coupled to a hidden state. Under uniform regularity assumptions, linear combinations of output derivatives eliminate the measured state and yield an equivalent observability test for the hidden dynamics. When those dynamics have real spectrum, the test reduces to excitation on each eigenspace intersected with the kernel of the direct measurements. An application to arbitrary-order integrator chains with measurements of ranges to fixed anchors gives an exact excitation condition for the associated lifted LTV system. A second application treats direct hidden measurements and compares the condition with existing sufficient tests.

0.34

Machine Learning-Based State Estimation for an Actual Transmission System Using Field PMU Data

eess.SY ·2026-09-22 ·Shiva Moshtagh, Nihar Thakkar, Anamitra Pal, Evangelos Farantatos
published similarity 0.48
Abstract · Accepted for presentation at the 60th Hawaii International Conference on System Sciences (HICSS-60), 2027

Time-synchronized state estimation (SE) plays a critical role in ensuring real-time situational awareness in modern power systems. However, achieving full system observability using phasor measurement units (PMUs) is often impractical due to cost and deployment constraints. Moreover, SE operation at PMU timescales imposes stringent requirements on latency, robustness, and reliability that are difficult to satisfy using conventional iterative hybrid SE techniques under incomplete observability by PMUs. This paper evaluates the feasibility of deploying deep neural networks for PMU-timescale, time-synchronized SE in real-world PMU-unobservable transmission systems using actual data from a US power utility. Key contributions include a systematic assessment of estimation accuracy, scalability, and computational performance under realistic operating conditions.

0.34

Exact Decisions and Certified Values in $L_\infty$-Norm Computation from State-Space Representations

cs.SC math.OC ·2026-11-11 ·Alban Quadrat, Fabrice Rouillier, Grace Younes
benchmark similarity 0.47
Abstract · 6 pages, 1 table. Submitted to the European Control Conference (ECC 2027)

Computing the $L_\infty$-norm of a time-invariant linear ordinary differential control system is a routine task in robust control, usually delegated to floating-point routines that perform well on most practical systems. Behind the numerical value, however, lies a discrete decision: whether a pole lies on the imaginary axis, and whether a mode of a realization is actually a pole of the transfer matrix. Floating-point arithmetic can only replace this decision with a tolerance. This paper explains, for a control audience, what reliable symbolic-numeric computation offers for this problem: exact arithmetic where a decision has to be made, and certified enclosures where a value has to be computed. We show how the problem is turned into a small polynomial system directly from state-space data, how this system is solved in practice, and what it costs. A benchmark on the {\tt COMPleib} library and on families of systems with known norms shows that two standard numerical routines err in opposite directions on the imaginary-axis decision, and never on the same system, while the certified method decides it correctly on every instance tested and computes the norm at a cost comparable to that of the numerical routines on most systems. We conclude with practical guidelines for users of numerical tools.

0.41

Attack-Resiliency Analytics for Wide-Area Control Systems in Smart Grids

eess.SY ·2026-09-29 ·Mohammad Zakaria Haider, Prabin Mali, Nur Imtiazul Haque, Muhammad Nadeem, Sumit Paudyal +1 more
similarity 0.47
Abstract

Wide-area monitoring, protection, and control (WAMPAC) systems damp inter-area oscillations in large interconnected grids, but their reliance on synchronized PMU measurements carried over wide-area networks exposes them to false data injection (FDI) attacks. This paper presents an attack-resiliency analytics framework that formally models the coupled dynamics of the wide-area damping loop, automatic generation control, and the governor and excitation systems, and formulates the optimal stealthy FDI attack as a mixed-integer linear program (MILP). The anomaly detection model (ADM) enters as a replaceable constraint set: either a static bad-data detection (BDD) rule or a boundary learned from benign operation calibrated to a common false-positive rate. On the IEEE 39 and 118 bus systems, with reference dynamics validated on an OPAL-RT hardware-in-the-loop testbed, the optimal attack with wide-area access attains 3.3 and 8.1 times the benign objective and reaches a 0.5Hz frequency excursion more than twice as fast as an attack confined to automatic generation control. Learned boundaries reduce the attack objective by 15.5 55.0% and prevent over-frequency relay trips in all configurations, with feasible stealthy attacks remaining in every case, and residual risk tracks the width of the learned boundary rather than the detector family.

0.31

A Hybrid Systems Approach to Parameterizing the PERC1 Model for Data Centers Using Synchrophasor Measurements

eess.SY ·2026-11-16 ·Bukunmi Gabriel Odunlami, Marcos Netto
similarity 0.47
Abstract

The Power Electronic Reconnecting and Ceasing (PERC1) load model represents the timed ceasing and reconnection of large power-electronic loads, including data centers. Voltage thresholds and timers govern its response, with a ramp on reconnection, making it a hybrid dynamical system. This paper formulates PERC1 as a hybrid automaton and uses that structure to identify its parameters from synchrophasor records of grid disturbances. We propose a four-stage identification procedure: mode-sequence identification, estimation of logic parameters from event-time constraints, and joint Gauss-Newton refinement using hybrid trajectory sensitivities and saltation matrices. The resulting salted Fisher information is then used to analyze parameter identifiability. Two structural results are established. The detection and actuation delays are identifiable only through their sum unless a second dip interrupts the reconnection ramp, and a single disturbance leaves one unidentifiable direction in each threshold-delay pair, which two disturbances with different voltage slopes resolve. A case study using synthetic 60 frames/s synchrophasor records demonstrates recovery of the ceasing and reconnection dynamics and identifies poorly observable parameters.

0.27

Learn Locally, Extend Globally: Koopman Eigenfunctions and the Basin of Attraction

eess.SY nlin.CD ·2026-11-13 ·Marcos Netto, Bukunmi Gabriel Odunlami, Aditya Kale, Andrey Bernstein
similarity 0.47
Abstract

Koopman eigenfunctions associated with the Jacobian eigenvalues of a stable equilibrium are Lyapunov functions defined exactly on its basin of attraction. We turn this into a computational procedure for power systems. Eigenfunctions estimated by extended dynamic mode decomposition (EDMD) are written as functions of the state, made to vanish at the equilibrium by centering the lifted variable $\cosδ$, and verified on a grid with the model: two Lyapunov candidates from the EDMD spectrum certify up to 66\% of the basin of a single-machine infinite-bus system from data in the linear region. The Koopman semigroup property then extends the EDMD-Lie eigenfunction to the whole basin, recovered at the grid resolution with its isostables and isochrons.

0.24

Observability Blocking in a Linear Synchronization Network with Partial State Measurements

eess.SY ·2026-08-26 ·Alexis Moreno, Abdullah Al Maruf
similarity 0.47
Abstract · 8 pages, 3 figures, submitted to the IEEE Conference on Decision and Control (CDC)

Large-scale networked systems are increasingly vulnerable to adversaries that can infer system dynamics from a small set of compromised nodes. This paper addresses the problem of blocking such inference using limited state information. While existing state-feedback methods achieve observability blocking with eigenvalue preservation, they require full state access and are impractical for large networks. We propose multiple control strategies that operate under partial state measurements. The first approach employs output feedback to achieve observability blocking while preserving a subset of open-loop eigenvalues. The second approach leverages an observer to reconstruct the system state and enables full-state feedback control, preserving all eigenvalues and providing greater flexibility in sensor placement. We further extend the observer-based design to a distributed framework. Numerical examples demonstrate the scope and validity of the proposed methods.

0.30