CS Paper Radar

Floating-point, exact and certified computation for control: paradigms, pitfalls, and how to combine them

Christina Katsamaki, Fabrice Rouillier

cs.SC ·submitted 2026-11-11 10:42 UTC · v1

Abstract

Many questions in linear systems theory have a discrete answer: is a polynomial Hurwitz, is a 2-D system structurally stable, is the peak gain finite, which solution of a Riccati equation is stabilizing? Algorithms implemented in floating point usually answer such questions, but often with a limited, or even no, guarantee on the result, which depends on a tolerance fixed a priori. Computer algebra and interval arithmetic provide other ways of computing, which give guarantees on the result, but usually at a higher cost. In this paper, we propose a short guide to these approaches: floating-point, exact, multiprecision and interval arithmetic, certified root isolation and certified Newton methods. Using small examples from control theory (each of them runs in a few seconds), we show what each approach guarantees and in which situations it fails, and how several approaches can be combined, for example by certifying a numerical solution, or by reducing a problem exactly before solving it with certified real solving. We then revisit the structural stability of 2-D systems (with and without parameters) and the computation of the $H_\infty$ norm, and we list the available implementations. The main examples are given as reproducible worksheets based on the PACE ecosystem.

Closest papers

Nearest neighbours by meaning across the whole index.

Exact Decisions and Certified Values in $L_\infty$-Norm Computation from State-Space Representations

cs.SC math.OC ·2026-11-11 ·Alban Quadrat, Fabrice Rouillier, Grace Younes
benchmark similarity 0.71
Abstract · 6 pages, 1 table. Submitted to the European Control Conference (ECC 2027)

Computing the $L_\infty$-norm of a time-invariant linear ordinary differential control system is a routine task in robust control, usually delegated to floating-point routines that perform well on most practical systems. Behind the numerical value, however, lies a discrete decision: whether a pole lies on the imaginary axis, and whether a mode of a realization is actually a pole of the transfer matrix. Floating-point arithmetic can only replace this decision with a tolerance. This paper explains, for a control audience, what reliable symbolic-numeric computation offers for this problem: exact arithmetic where a decision has to be made, and certified enclosures where a value has to be computed. We show how the problem is turned into a small polynomial system directly from state-space data, how this system is solved in practice, and what it costs. A benchmark on the {\tt COMPleib} library and on families of systems with known norms shows that two standard numerical routines err in opposite directions on the imaginary-axis decision, and never on the same system, while the certified method decides it correctly on every instance tested and computes the norm at a cost comparable to that of the numerical routines on most systems. We conclude with practical guidelines for users of numerical tools.

0.41

LLM2Cert: LLM Synthesis of Certificates with SMT/Lean Verification

eess.SY cs.AIcs.LGmath.OC ·2026-10-21 ·Zhipeng Cao, Peiyang Song, Nikolaus Vertovec, Weiru Cui, Zhihao Yang +4 more
benchmarkcode/data similarity 0.57
Abstract · 59 pages, 3 figures. Equal contribution: Zhipeng Cao and Peiyang Song. Equal advising: Bai Xue and Alessandro Abate

Lyapunov functions and barrier certificates give state-space guarantees of stability and safety, but synthesizing and verifying them---especially for nonlinear, high-dimensional systems---remains an open challenge. Existing pipelines verify candidates with numerical solvers (sum-of-squares programs), interval methods, or satisfiability-modulo-theories (SMT) solvers, which often require relaxations, are conservative, or scale poorly with model dimension and nonlinearity. These limitations have also shaped benchmark design: standard test suites are dominated by low-dimensional polynomial systems chosen to suit what solvers can handle rather than what engineering applications require. We address both sides of this challenge. First, we introduce DynaCertBench, a benchmark of 105 instances: 80 non-redundant systems curated from the literature, extended with high-dimensional and control-constrained variants and new nonlinearly coupled systems, comprehensively spanning stability, region-of-attraction, forward-invariance, and safety tasks. Second, we present LLM2Cert, an LLM-driven framework that synthesizes candidate certificates and verifies them against their proof obligations: each obligation is routed to an SMT solver or directly to the Lean Proof-Repair agent. On DynaCertBench, LLM2Cert verifies 81 of 105 instances ($77.1\%$), a $17.1$ percentage point improvement over one-shot proposal without feedback. On the 81 fixed certificates, LLM2Cert verifies 22 that All-SMT leaves unresolved. Code and data are available at https://github.com/FormalCert-AI/llm2cert.

0.48

Validating direct solvers for Newton's gravitational N-body problem, and the systematic comparison between IEEE floating point and Posits

cs.PL physics.comp-phastro-ph.IMnlin.CD ·2026-08-17 ·Simon Portegies Zwart
similarity 0.57
Abstract · submitted to Computer Physics Communication (processed referees comments)

We present a systematic comparison between arbitrary precise arithmetic and integration, IEEE-754 compliant floating point arithmetic (fp16, bfp16, fp32, double precision fp64, and quadruple precision fp128), and two implementations of Posits (type III unum) for solving Newton's chaotic N-body problem. Each implementation is benchmarked with arbitrary precise calculations to objectively evaluate their performance in precision as well as speed. We rely on hardware and compiler implementations for fp64, and software implementations for arbitrary-precision arithmetic and Posits. Half precision arithmetic (fp16, bfp16, and Posits$<16,1>$) are insufficiently precise for solving Newton's equations of motion. Single precision (fp32, and Posits$<32,2>$) could be used for statistical ensemble calculations, but lead to relatively large errors in any individual strong encounter. All 64-bit implementations fp64 as well as Posits (Posits$<64,3>$) experience difficulty in our tests. One of the implementations of Posits (Universal) gives precision comparable to fp64 but is slow (by at least an orders of magnitude compared to fp64 after correcting for the more efficient hardware support for the latter). The other (CPPPosits) has a speed comparable to fp64 but has systematically larger errors (by about an order of magnitude compared to fp64 with excesses exceeding two orders of magnitude). As a consequence, this implementation leads to a systematic drift in the result space and has difficulty resolving close encounters. Posits and fp64 have difficulty when integrating a dynamical system in a moving reference frame; testing Galileo invariancy. In their current implementation, Posits do not seem to be the ideal alternative for fp64 when integrating chaotic or stiff ordinary differential equations, such as Newton's equations of motion.

0.21

Root isolation for analytic functions using cubic hermite interpolation

cs.SC math.NA ·2026-10-02 ·Christophe Raffalli
unusual similarity 0.56
Abstract

We present a root isolation algorithm for an analytic function. The method combines interval subdivision with a heuristic test based on local cubic Hermite interpolation. Whenever the function is sufficiently close to its cubic Hermite interpolant at a few sample points, we assume that the critical points of the cubic interpolant give a valid root isolation for the original function. Such an algorithm cannot, in general, provide a rigorous certification of the computed intervals. Nevertheless, extensive numerical experiments show that it is highly efficient and almost always produces the correct results. We hope that a probabilistic or exact algorithm can be derived from this work.

0.28

Performance Evaluation of an Adaptive Quadrature and a Double Exponential Formula Using Arbitrary-Precision Floating-Point Arithmetic

cs.PF math.NA ·2026-08-13 ·Tomonori Kouya
similarity 0.56
Abstract

Using arbitrary-precision arithmetic provided by the GNU Multiple Precision Floating-Point Reliable Library, we implement AQE11D---that is, Ninomiya's adaptive 9-point Newton--Cotes rule extended with a sequence of higher-order rules---and Takahasi and Moris' double exponential (DE) formula. We evaluate them for Kahaner's 21 test problems. For both absolute tolerances $10^{-50}$ and $10^{-100}$, AQE11D attains target accuracy on all 21 problems; however, for strong endpoint singularity such as $1/\sqrt{x}$, it requires about $5.4\times10^{7}$ function evaluations at $10^{-100}$, roughly $7\times10^{4}$ times as many as the DE formula. The formula converges on 18 problems at both tolerances, demonstrating its strength against endpoint singularities but also its failure, as it stands, on problems with a singularity inside the integration interval.

0.04

Certified Scalable Enclosures for Uncertain Underdetermined Systems

eess.SY q-bio.QM ·2026-10-08 ·Rudra Prakash, Shaunak Sen
unusual similarity 0.54
Abstract · 18 pages, 1 figure (2 panels), 1 table

The central challenge in underdetermined models with bounded uncertainty, such as in nonlinear design and estimation, is certifying the solution sets. Conventional solution methodologies, such as those based on Newton's method or on sampling-based uncertainty quantification, are either not applicable due to the underdetermined nature or do not give guarantees that all solutions have been found, assuming they converge. We addressed this issue for a problem that arises in nonlinear design, where a target steady-state box is prescribed and the parameters have to be found. We developed a trapezoidal linearisation method that rigorously encloses all solutions and combined it with a tractable linear programming method to compute the component-wise bounds. We showed that the resulting families of linear programs can iteratively contract an initial parameter region. A subdivision of the target state and the initial parameter region can improve the contraction and provide tighter enclosures. The trapezoidal relaxation gives a family of linear programs that can also be used for finding solutions for interval linear systems via the Oettli-Prager characterisation. We demonstrate the generality of the method through different applications, including nonlinear design in biomolecular circuits, a sensitivity analysis method, and in a compressed sensing context, and discuss the trade-off between enclosure tightness and computational cost.

0.29

Transferring Controller from Math to Real World Systems: A Formal Control Theoretic Approach

eess.SY ·2026-11-03 ·P Sangeerth, Bhabani Shankar Dey, Pushpak Jagtap
similarity 0.53
Abstract

The letter aims to improve the math-to-real or math-to-sim transfer of a mission controller designed for a Temporal Reach Avoid Stay (T-RAS) specification. Our approach uses the control-theoretic concept of Incremental Input-to-State stability ($δ$-ISS). We model the real-world system as an uncertain system, represented by a nominal mathematical model with an additive disturbance. Our method involves two steps: firstly, we make the nominal mathematical model and the real-world system $δ$-ISS. Secondly, we design a mission controller for the mathematical model that satisfies a modified specification. We then prove that applying the same mission-level input sequence to the real-world system guarantees that the original specification is satisfied in the real world. Videos of real-world experiments are available at https://youtu.be/NvjkIZxtnPM.

0.59

Real-Time Bounded Catenary Solver for UAV Tether Modeling

cs.RO ·2026-09-16 ·Max Beffert, Andreas Zell
similarity 0.53
Abstract

For non-stationary tethered multirotor UAVs in real-world conditions, simulating the forces imposed on the drone by the aerodynamic drag of the tether becomes crucial, with online use cases placing a hard bound on the maximum solve time. In previous work, a quasi-analytical catenary tether model reached a mean solve time of 0.51 ms using a general-purpose root finder, but without any worst-case guarantees or proven convergence. In this work, we reformulate the inner solver by reducing the catenary boundary-value problem to a single transcendental equation in one well-conditioned unknown. We derive a closed-form bracket and prove monotonicity and convexity as well as existence and uniqueness of the root, which together guarantee convergence of the solver. We further propose a two-regime initial guess which approximates the true root within 3.4 % and reduces the mean iteration count by 69.2 % to 2.24 compared to the textbook initialization. Building on the hybrid root-finding method rtsafe (Newton-Raphson with bisection fallback giving bounded iteration counts), we implement a specialized variant that exploits the problem structure to omit unnecessary checks while retaining correctness, which gives up to 1.37 times speedup. With the proposed solver the full tether model achieves a nearly constant solve time of 4.0 us on average and 4.6 us at worst, a 68 times speedup over an optimized re-implementation of the previous method, while agreeing with it to a relative deviation of 8.7e-9. Because the reformulation leaves the underlying physical model untouched, the experimental validation of the previous work carries over unchanged. We further demonstrate its suitability for embedded, resource-constrained platforms with a Lua implementation running directly in ArduPilot on a drone's flight controller, where it stays well inside the scheduling budget with a mean solve time of 0.74 ms.

0.22