CS Paper Radar

SCR-Mamba: Skeleton-conditioned Mamba with cross-scale incremental refinement for efficient 3D human pose estimation

Jie Wang, Xuejing Gu, Congzhe Zhang, Zibo Zhao

cs.CV ·submitted 2026-11-11 14:14 UTC · v1

Abstract

Mamba-based methods for video-based 3D human pose estimation can model long sequences with linear complexity, but their selective state updates usually lack direct exploitation of skeletal relations. Meanwhile, stacking modeling blocks at the full temporal resolution leads to high computational overhead, while compressing the temporal sequence makes it difficult to retain per-frame details. To address these issues, we propose SCR-Mamba, whose core consists of Skeleton-Conditioned State Modeling (SCSM) and Cross-Scale Incremental Refinement (CSIR). SCSM generates a skeleton context from bone connections and left-right symmetry relations and generates the selective parameters of the spatial and temporal branches conditioned on it, so that structural relations are involved in the writing, propagation, and reading of state information. CSIR constructs multi-scale motion representations through content-adaptive aggregation and progressively refines the retained per-frame features with the increments produced by coarse-scale modeling, integrating long-range motion context while reducing full-resolution computation. On Human3.6M with Stacked Hourglass (SH) 2D detections and 243-frame inputs, SCR-Mamba-L achieves 36.8 mm MPJPE (P1) with 7.72 M parameters and 15.10 G MACs, less than 1/7 of the computational cost of StructMamPose-L with similar accuracy; SCR-Mamba-X further reaches 36.6 mm P1 and 30.9 mm P-MPJPE (P2), achieving state-of-the-art performance. On MPI-INF-3DHP, SCR-Mamba-X achieves a percentage of correct keypoints (PCK) of 99.3%, an area under the curve (AUC) of 88.1%, and an MPJPE of 14.2 mm.

Comment
15 pages, 9 figures, 11 tables

Closest papers

Nearest neighbours by meaning across the whole index.

DSR-Net: Learning Dynamic Skeletal Relations for 3D Human Pose Estimation

cs.CV ·2026-10-10 ·Fan Li, Jian Xiang, LinLin Xue, Yuwei Gao
similarity 0.75
Abstract · 16 pages, 10 figures

3D human pose estimation requires accurate modeling of motion-dependent skeletal structures and inter-joint dependencies. Existing methods typically rely on fixed skeletal topologies in Graph Convolutional Networks (GCNs) or implicitly capture joint relations through attention mechanisms, limiting their adaptability to diverse motion patterns. To address this issue,we proposeDSR-Net, a dynamic structural representation learning framework for 3D human pose estimation. Specifically, a Dynamic Skeletal Relation (DSR) module is introduced to learn adaptive inter-joint dependencies beyond predefined skeletal connections. Based on the learned relations, a hierarchical relation-aware fusion strategy is developed to facilitate effective interaction between structural and temporal representations. In addition, a lightweight Residual Skeletal Recalibration Module (RSRM) is designed to enhance the stability of structure-aware features with minimal computational overhead. Extensive experiments on Human3.6M and MPI-INF-3DHP demonstrate that DSR-Net achieves MPJPEs of 37.9 mm and 14.9 mm, respectively, consistently improving over strong baselines. The results validate the effectiveness of dynamic skeletal relation modeling for robust 3D human pose estimation.

0.14

Structure-Guided Multi-Granularity Spatiotemporal Transformer for Efficient Monocular 3D Human Pose Estimation

cs.CV cs.AI ·2026-11-16 ·Sheng Xu, Aoduo Li, Rongli He
similarity 0.73
Abstract

Existing multi-granularity methods for monocular 3D human pose estimation emphasize spatial joint features while underusing skeletal structure, including global connectivity and temporal continuity. Moreover, modeling entire frame sequences incurs high computational costs. We propose a Structure-Aware Multi-Granularity Spatiotemporal Transformer that integrates structural priors across spatial and temporal representations for accurate and efficient pose estimation. A three-level feature extractor captures human topology at the joint, bone, and limb levels. Gated Adaptive Spatial Attention (GASA) embeds structural constraints into spatial attention, while Multi-Granularity Feature Enhancement (MGFE) uses hierarchical pooling and fusion to strengthen local details and global semantics. Temporal Segment Fusion (TSF) aligns temporal contexts across granularities to capture both short- and long-range motion patterns. Hierarchical Cross-Attention (HCA) promotes spatiotemporal interaction between granularities, and Keyframe Attention (KFA) selects informative motion segments to reduce redundancy and computational cost. Experiments demonstrate improved accuracy and efficiency over conventional Transformer-based approaches, highlighting the effectiveness of structure-aware multi-granularity modeling for monocular 3D human pose estimation.

0.17

Joints, Camera, Action! Co-Generating 3D Motion and Video for Arbitrary Rigs

cs.CV cs.AIcs.GRcs.LG+1 ·2026-10-20 ·Noam Rotstein, Yoad Tewel, Chen Tessler, Haggai Maron, Gal Chechik +3 more
code/datacommunity pick similarity 0.71
Abstract

Video generation models can now depict remarkably realistic motion. Yet it is unclear how to use this motion beyond pixels: to animate a specific 3D asset and replay the animation in its 3D scene. For instance, a video model can show a monkey jumping over a crossbar, but it cannot return that jump as replayable 3D motion placed in the 3D scene. Here we present a model that directly co-generates the video and 3D motion for any supplied rig, along with a camera that registers this motion to the scene. Prior video-motion models either handle only human skeletons, often adding billions of parameters, or triangulate 3D motion from generated 2D pose maps. We instead keep 3D motion in a separate model that supports arbitrary skeletons, and connect it to a pretrained video model through a small set of cross-attention layers. This separation lets the motion model first learn how skeletons move from motion-only data, which is easier to obtain and augment than paired video. Additionally, our model learns to locate each joint in the video frames, which lets us recover the camera and place the 3D motion in the scene. To train across many skeletons, we use a generative video editor to place animated 3D assets in scenes suited to their actions, curating the edits so their known motion remains valid. Together with human and robot video, this yields nearly 200K training pairs. Our evaluations demonstrate that our model animates diverse rigs from text more faithfully than video-first pipelines, and its motion responds to the surrounding scene. It also turns video into rig motion, rig motion into video, and enables keyframe-based control of the 3D motion. Videos and additional results are available on our project page: https://research.nvidia.com/labs/par/projects/jca/.

0.35

CAST: Real-Time Motion Capture for Any Skeleton Topology

cs.CV ·2026-10-10 ·Pu Pang, Zhongfei Qing, Ling-Hao Chen, Songnan Li, Hua Huang +1 more
benchmarkcode/data similarity 0.71
Abstract · 39 pages. Code repository: https://github.com/fankewen/CAST

This paper studies the problem of recovering motion from monocular video, even when the target skeleton topology differs from the subject observed in the video. Although previous methods have made efforts to resolve this problem, they remain vulnerable to joint-rotation errors that are coupled across the skeleton and can propagate along its kinematic hierarchy. To mitigate these errors, we present CAST, a topology-aware motion capture framework that combines learned local rotations with geometric correction guided by predicted global bone directions. Our observability analysis characterizes which rotational components can be constrained by outgoing bone directions. Guided by this analysis, GRACE uses reliability-gated alignment to correct composed orientations in parent-to-child order, leaving unconstrained components to the learned rotation predictor. The motion predictor and correction module are trained jointly with motion-derived supervision, using a frozen image encoder. Experiments under the TopoCap evaluation protocol show that the proposed framework improves motion recovery across different target topologies, including unseen structures. Reference-based cross-skeleton evaluation on a curated Mixamo benchmark and a user preference study further assess transfer to different target structures. A causal CAST-B variant achieves over 51 FPS on a single NVIDIA A100 GPU, with timing covering image encoding and motion prediction. Code repository: https://github.com/fankewen/CAST.

0.50

HSTGFormer: Hyper Spatial-Temporal Graph Transformer for 3D Human Pose Estimation

cs.CV cs.AI ·2026-08-12 ·Ruochen Li, Shuang Chen, Wenke E, Farshad Arvin, Amir Atapour-Abarghouei
published similarity 0.69
Abstract · Accepted to BMVC 2026, full paper

Transformer-based methods have achieved strong performance in monocular 3D human pose estimation, but most existing approaches organise spatial and temporal reasoning as separate stages, which may weaken unified spatial-temporal interdependencies inherent in human motion and compress frame-level structural information before temporal modelling. In this paper, we propose HSTGFormer, a graph-enhanced Transformer framework that reformulates spatial-temporal reasoning as localised coupled graph aggregation over joint-time nodes. Specifically, HSTGFormer introduces a Hyper Spatial-Temporal Graph (HSTG), which decomposes global spatial-temporal reasoning into local spatial-temporal receptive fields around individual joint-time nodes by extending per-frame skeleton graphs into temporal neighbourhoods, thereby enabling structure-aware coupled reasoning while preserving local structural motion information. It further incorporates an Adaptive Dual-Scale Temporal Graph (ADSTG) to capture joint-specific temporal dependencies over complementary short- and long-range windows. A lightweight node-wise fusion module further adaptively integrates the two graph representations for each joint-time node. Experiments on Human3.6M and MPI-INF-3DHP show that HSTGFormer achieves strong accuracy with high computational efficiency.

0.27

DirtyMoCap: Robust Motion Capture from Unconstrained Markers

cs.CV ·2026-09-17 ·Long Wang, Shuting Zhao, Shen Yan, Siyuan Yu, Xiaoben Li +3 more
code/data similarity 0.68
Abstract · Homepage: https://wanglongzju.github.io/DirtyMoCap-Project-Page

Optical motion capture delivers high-fidelity human motion, but its reliance on strict marker layouts and clean trajectories severely limits its real-world applicability. In practice, tracking systems frequently output unconstrained markers: sparse, noisy, and unordered point clouds with unknown or varying configurations. To bridge the gap between corrupted raw markers and parametric human models, we introduce DirtyMoCap, a robust, marker-layout-free framework. Our core insight is to map unordered marker observations to a fixed set of "proxy anchors" comprising skeletal joints and body surface points, which serve as a stable intermediate representation. We first initialize and track these anchors over long sequences using a recurrent sliding-window architecture. Then, a custom differentiable Gauss-Newton solver fits the SMPL-H model to the tracked anchors to recover full-body pose, translation, and shape. By explicitly deriving geometric residuals, our solver learns adaptive observation confidence, smoothness, and prior weights end-to-end, adapting dynamically to the reliability of the input data. Extensive experiments on diverse, noisy marker configurations demonstrate that DirtyMoCap successfully generalizes across arbitrary layouts using only a single trained model. It consistently outperforms state-of-the-art configuration-specific baselines in both joint and vertex reconstruction accuracy, while our custom CUDA solver achieves up to a 100x speedup over standard PyTorch implementations. We further apply DirtyMoCap to heterogeneous raw optical MoCap recordings of traditional Chinese martial arts, yielding a Kung Fu motion dataset of temporally coherent SMPL-H reconstructions. Code and data are available at https://wanglongzju.github.io/DirtyMoCap-Project-Page.

0.56

Skeletons in Flow: Graph Structured Flow Matching for Human Motion Prediction

cs.CV cs.RO ·2026-09-26 ·Yixuan Wang, Brandon C. Fallin, Warren E. Dixon
similarity 0.68
Abstract · 22 pages, 3 figures

Human motion prediction requires diverse future trajectories that remain consistent with observed motion and the articulated physical structure of the body. Skeletal constraints restrict individual poses, while coordinated motion depends on spatial interactions (between connected joints) and temporal interactions (between time instants). To facilitate human motion prediction in light of these constraints and interactions, we introduce Graph Structured Flow Matching (GSFM), which transports the complete future skeletal trajectory through a single conditional velocity field. The trajectory produces a spatiotemporal skeleton graph, and spatial and temporal attention couple its evolution according to skeletal relations and physical time offsets. Bone directions lie on unit spheres relative to a root joint, and tangent evolution preserves input bone lengths throughout generation. We train a learned velocity field through conditional flow matching along geodesic paths connecting random trajectories centered on the last-observed pose to recorded future trajectories. Experiments on the Archive of Motion capture As Surface Shapes (AMASS) dataset evaluate prediction accuracy, diversity calibration, and motion statistics. We demonstrate the contributions of spatial and temporal message passing in the developed architecture through an ablation study. GSFM models trained on AMASS also perform competitively on the Human3.6M skeleton without parameter updates or retraining, demonstrating applicability to an unseen skeletal structure.

0.21

FlowRig: Unified Skeleton Generation for 3D and 4D Meshes via Flow Matching

cs.CV cs.GR ·2026-11-02 ·Fengzhi Guo, Nate Morrill, Shiqi Li, Cheng Zhang
code/data similarity 0.68
Abstract · Project page: https://tamu-visual-ai.github.io/FlowRig/

Automatic rigging is a fundamental task for both static 3D and dynamic 4D mesh animation, yet existing methods do not provide a unified feedforward solution for these two settings. While static 3D riggers achieve strong quality, they often provide limited control over bone count and become temporally unstable when applied frame by frame to dynamic meshes. Existing 4D methods, in contrast, typically rely on expensive per-sequence optimization. We propose FlowRig, a template-free, data-efficient framework for unified 3D and 4D skeleton generation. Built on flow matching, FlowRig generates temporally aligned skeletons for an entire sequence in a single feedforward pass, while naturally handling single-mesh 3D rigging. The model further supports explicit skeleton-count control, uncertainty estimation for candidate selection, and masking-based interpolation, forecasting, and backcasting. To address limited paired 4D rigging data, we adopt a curriculum that initializes from large-scale 3D rigging data and adapts to mid-scale 4D mesh-skeleton data. Experiments show that FlowRig achieves strong static 3D rigging performance with controllable bone complexity, as well as high-quality and temporally consistent 4D reconstruction and prediction results.

0.24