CS Paper Radar

Faithful in Steps: Improving Generalization and Citation in RAG via Query Decomposition

Yue Liu, Zhongying Ru, Shimin Di, Jipeng Zhang, Ruiyuan Zhang, Xiaofang Zhou

cs.CL cs.AI ·submitted 2026-11-11 14:22 UTC · v1
top venue

Abstract

Retrieval-augment generation is a prevalent strategy to mitigate hallucinations of LLMs. The attributable RAG (RAGQ) generates quotes for its answers. The quotes indicate which input contexts support the RAG to derive the answers, enhancing the answer's verifiability and trustworthiness. However, existing RAGQs exhibit significant degradation when dealing with questions that require multi-hop reasoning and multi-modal understanding, suffering from over-citation, implicit entity identification failure, and poor generalization. In this paper, we propose a novel RAGQ framework, namely QDRAG. QDRAG breaks down the input question into atomic subquestions to identify the implicit entities. Then, the reranker prunes context distractors to eliminate the downstream over-citation. To facilitate query decomposition, we propose two zero-shot approaches: QD-C and QD-R, which guide the QD MLLM to decompose the question based on context knowledge and retrieval rewards, respectively. One interesting finding is that finetuning on the QD task shows better generalizability compared to directly finetuning on the downstream RAGQ task. Experiments on four multi-modal QA benchmarks demonstrate QDRAG's efficacy in grounding answers and generating faithful citations. The framework significantly outperforms all the baselines on both in-domain and out-of-domain tests, even surpassing Gemini-Pro.

Comment
Accepted by AAAI 2026

Closest papers

Nearest neighbours by meaning across the whole index.

DeFT-RAG: Decomposing Multi-Hop Questions into Self-Contained Sub-Questions with Reusable Answers

cs.CL cs.AIcs.IR ·2026-10-27 ·Dingyi Kang, Bingzhe Li
code/data similarity 0.76
Abstract · 12 pages, 2 figures, 7 tables. Code: https://github.com/Dingyi-Kang/DeFT-RAG

Retrieval-augmented generation (RAG) lets a large language model (LLM) answer questions by retrieving relevant passages from a large corpus. However, RAG struggles with multi-hop questions, which require chaining facts spread across several documents through intermediate entities that the question never mentions. Graph-based RAG methods retrieve once from the entities a question names and so rarely recover the full evidence chain. Iterative RAG methods recover it step by step, but their accuracy is limited by the many tasks they ask the LLM to perform, such as planning the sub-questions, deciding their dependencies, rewriting them as answers arrive, and keeping track of what is known. We propose DeFT-RAG, a RAG framework built on three components. First, DeFT-RAG generates one self-contained sub-question at a time from the original question and the sub-questions answered so far with their answers (QA pairs). Each sub-question names every entity it asks about, which removes the need to plan, track dependencies or rewrite, and lets the LLM focus on a single fine-grained task at a time. Second, DeFT-RAG moves the remaining LLM work outside the LLM: rule-based updates to a QA table that keeps track of what is known, and yes/no decisions made by a fine-tuned lightweight decision model. Third, DeFT-RAG caches the QA pairs and reuses an answer when a later question asks a sub-question with the same meaning. On MuSiQue, 2WikiMultiHopQA and HotpotQA, DeFT-RAG achieves the best accuracy among thirteen baselines with both gpt-4o-mini and Qwen3.6 as the backbone, while giving the LLM fewer input tokens than any other iterative method. With a QA cache shared across 1,000 MuSiQue questions, 23.1% of sub-questions are answered from the cache, which reduces LLM calls by 12.9% without lowering accuracy.

0.43

Don't Lose Entities from Retrieval to Generation: Dual Entity Recovery RAG for multi-hop QA

cs.CL ·2026-09-05 ·Heechang Lee, Dong-Young Lim
top venue similarity 0.74
Abstract · Findings of the Association for Computational Linguistics: EMNLP 2026

Retrieval-augmented multi-hop question answering (QA) decomposes a query into sub-questions and decomposes the corpus into smaller retrieval units such as sentences. Both forms of decomposition improve the pipeline, but we show that both share the same vulnerability, the loss of entity information, and that this loss breaks the pipeline at two separate points. The first point is retrieval, where a sub-question loses the entity resolved at the previous hop, leaving the retriever with nothing to match against. The second point is harder to see, because retrieval still appears to succeed. Once a passage is split into sentences, an isolated sentence loses the context that grounds its pronouns, so even with the correct sentence in hand the LLM cannot tell which entity the sentence is about. We isolate this second point as a distinct failure mode that we call lost-in-generation, and a retrieval-controlled experiment shows that it degrades answers even when the gold evidence is fixed in the context. We then propose Dual Entity Recovery RAG (DER-RAG), which keeps the grounding entity explicit from retrieval through to generation with two lightweight components, a two-way query decomposition that carries the resolved entity across sub-questions and a subject entity prefix attached to each sentence at generation time. DER-RAG needs no graph construction, no corpus modification, and no fine-tuning, yet on three multi-hop QA benchmarks it matches or exceeds strong baselines, including graph-based methods that depend on costly offline structures.

0.29

EnSI-RAG: Entity-Structure-Indexed Retrieval-Augmented Generation for Long-Document Question Answering

cs.CL cs.AIcs.DBcs.IR ·2026-08-21 ·Xuanyu Meng, Jiashuo Sun, Jash Rajesh Parekh, Jiawei Han
code/datahighly cited similarity 0.73
Abstract · 21 pages, preprint

Question answering (QA) over long, connected documents remains challenging because relevant evidence may span multiple entities and their relationships. Existing retrieval-augmented generation (RAG) methods typically index documents as raw chunks and retrieve them through embedding similarity. Their performance degrades when chunk boundaries separate entities from supporting evidence or when a question requires multi-hop reasoning across the corpus. We propose EnSI-RAG (Entity-Structure-Indexed Retrieval-Augmented Generation), a framework that constructs a query-independent, entity-centered index. Each record (e, t, k, v) represents an entity e, its type t, a semantic category k in {property, relation, aspect}, and a value v, while retaining links to the original source passages. At query time, these records serve as retrieval handles, and an LLM synthesizes the retrieved passages into the final answer. This design separates evidence localization from answer synthesis while preserving traceable source evidence. Across Loong and Oolong, EnSI-RAG achieves an average accuracy of 78.24. Relative to the published baseline scores used as references, this is 6.62 points higher, suggesting its effectiveness across these settings. The code is available at https://github.com/RamonMeng/EnSI-RAG.

0.60

HyperProve: Answer-Guided Hypergraph Expansion for Multi-Hop Question Answering

cs.CL ·2026-09-12 ·An Nguyen Phu, Dung Nguyen Quang, Luu Hieu An, Linh Ngo Van, Trung Le +1 more
top venue similarity 0.71
Abstract · EMNLP 2026

Multi-hop question answering often fails when retrieval treats evidence as isolated matches to the original question, since the facts needed to answer a complex question are usually connected through intermediate entities, relations, and constraints. We propose HyperProve, a retrieval-augmented QA framework that addresses this challenge by coupling question decomposition with answer-conditioned expansion over a hypergraph of atomic facts. HyperProve does not use atomic facts, hypergraphs, or iterative retrieval in isolation; instead, it carries intermediate answers and supporting hyperedges as retrieval state, then uses that state to bias the next local hypergraph expansion. This design enables HyperProve to construct coherent evidence chains for final answer generation while making the retrieval process stateful and fact-centered. Across multi-hop QA benchmarks, HyperProve achieves the best overall performance in our evaluation, outperforming the strongest baselines by an average relative improvement of 6.2% in answer accuracy and 4.9% in F1.

0.36

EAR: Entity-Aware Partitioning Approach for Retrieval-Augmented Generation Development

cs.CL cs.IR ·2026-09-10 ·Cenab Batu Bora, Oylum Alatlı, Sebnem Bora, Oguz Dikenelli
published similarity 0.70
Abstract · 6 pages. Accepted and presented at the 2026 Innovations in Intelligent Systems and Applications Conference (ASYU 2026). To appear in the con…

Retrieval-augmented generation (RAG) can improve knowledge-intensive question answering, but the first design choice is easy to overlook: how should the source corpus be partitioned into retrievable units? Fixed-size chunks often return long passages whose relation to the question is only implicit. We introduce EAR, an Entity-Aware Partitioning approach for multiple-choice question answering (MCQA). EAR extracts normalized surface anchors from the question, answer options, and corpus; retrieves local windows around matching corpus anchors; and can attach a larger parent passage through an extractive summary. We evaluate EAR on a cleaned Massive Multitask Language Understanding (MMLU)-style subset of 153 questions selected by an automatic corpus-support heuristic and using decontaminated public textbook text. Across same-protocol top-k = 3 and top-k = 8 sweeps with Mistral, Gemma, and DeepSeek, EAR entity-window reduces retrieved words by 37.5-40.2% relative to chunks. Observed accuracy changes are +5.2, +1.3, and -3.9 points at top-k = 3, and +5.9, -3.3, and -4.6 points at top-k = 8; none of the entity-window differences is statistically significant. The scoped contribution is methodological: EAR provides a compact and inspectable retrieval unit, while its rule-based anchor extractor remains domain-specific and requires separate validation before transfer.

0.27

Beyond One-Shot Expansion: Contrastive Evidence Exploration for Multi-Hop Retrieval

cs.AI cs.IR ·2026-09-07 ·JungMin Yun, YoungBin Kim
top venue similarity 0.70
Abstract · Accepted to CIKM 2026

Retrieval-augmented generation (RAG) critically depends on retrieving the evidence necessary for effective reasoning. However, this remains particularly challenging in multi-hop question answering (QA), where supporting passages are often linked through intermediate entities and relations that must be progressively uncovered. Existing retrieval approaches typically rely on a single retrieval intent or one-shot query expansion, limiting their ability to adapt to newly retrieved evidence and potentially introducing noisy or redundant retrieval signals. To address these limitations, we propose a training-free multi-hop retrieval framework that integrates evidence-conditioned exploration, passage-specific contrastive refinement, and coverage-aware final ranking. During offline indexing, the framework constructs passage-specific contrastive facets that characterize each passage relative to its semantically similar neighbors, providing fine-grained signals to distinguish closely related candidates. At inference time, the framework iteratively retrieves evidence, generates probes targeting unresolved information needs, refines candidate relevance using the contrastive facets, and selects a complementary set of passages that collectively cover diverse evidence-seeking intents. Experiments on MuSiQue, HotpotQA, and 2WikiMultihopQA demonstrate consistent improvements in retrieval quality and downstream QA performance over baselines.

0.30

FuseRAG: Fusing Structure and Evidence into Inference for Cost-Efficient Graph-based RAG

cs.DB ·2026-10-16 ·Tingqi Wang, Yingshu Li, Zhipeng Cai
similarity 0.70
Abstract

Graph-based retrieval-augmented generation (RAG) exploits relationships among evidence to support multi-hop question answering. However, conveying retrieved graphs through non-unique linear textual contexts to Large Language Models (LLMs) leads to graph-structure degradation and inefficient KV-cache reuse. Meanwhile, graph-structure order optimization is already NP-hard, and the additional KV-cache reuse objective further complicates the search by introducing potentially conflicting orders. To tackle these issues, we propose FuseRAG, a cost-efficient graph-based RAG framework that shifts most retrieved evidence from explicit textual contexts to latent representations. Our main idea is to separate reusable evidence content from query-aware structural interactions in latent space, while retaining only a few explicit facts as semantic anchors. The resulting latent representations are injected into decoder self-attention, where they reshape attention over evidence and thereby influence hidden states and next-token probabilities. This design preserves graph structure through latent interactions, enables evidence reuse beyond exact token-prefix matching. Experiments on three multi-hop question-answering datasets with Llama-3-8B and Qwen3.5-9B show that FuseRAG improves answer quality while achieving up to 2.7x and 2.2x TTFT speedups over the fastest graph-based baseline, respectively.

0.21

Automating Multi-Hop RAG Evaluation via TRIAD: From Context Extraction to Validated Dataset Generation

cs.CL cs.AI ·2026-08-21 ·Lorenz Brehme, Adam Jatowt
publishedcode/data similarity 0.70
Abstract · Accepted at the 19th International Natural Language Generation Conference (INLG 2026)

Recent advances in LLMs and the adoption of RAG systems in industry have created a need for domain-specific question-answer datasets that can assess RAG performance on proprietary data. Existing datasets, such as HotpotQA, challenge current RAG systems on Wikipedia-based knowledge, but they cannot be transferred directly to domain-specific settings. A comprehensive evaluation of RAG system quality requires both multi-hop queries and unanswerable questions. This paper introduces TRIAD, a three-stage automated dataset generation approach. First, it generates question--answer (QA) pairs for the domain-specific knowledge base of a RAG system. Second, a validator checks each QA-pair in a feedback loop. Third, the QA pairs are extended with relevance-labeled context documents for downstream evaluation. We evaluate this approach against the established MuSiQue and HotpotQA datasets. The results show that the generated dataset exhibits similar performance trends across different RAG setups, while human validation indicates that the questions are suitable for evaluating a domain-specific RAG system. The code used to generate the dataset and all validation results are available in our GitHub repository(https://github.com/lorenzbrehme/triad).

0.53