CS Paper Radar

Sustainable Federated Fine-Tuning with LoRA: Environmental Impact and Performance Footprint

Pedro Augusto Londe Ribeiro, Rodrigo Moreira, Larissa Ferreira Rodrigues Moreira, Joberto S. B. Martins, Tereza C. Carvalho, Flávio de Oliveira Silva

cs.LG cs.NI ·submitted 2026-11-12 14:30 UTC · v1
published

Abstract

Federated Learning (FL) with Parameter-Efficient Fine-Tuning (PEFT) enables efficient adaptation of Large Language Models (LLMs), yet its energy and carbon costs across hardware remain poorly understood. We evaluated federated Low-Rank Adaptation (LoRA) fine-tuning on NVIDIA A40, RTX 6000 Ada, and A100 GPUs using a $2^2$ full factorial design with 135M/360M models and 10/100 local steps. CodeCarbon tracked energy and estimated CO$_2$-equivalent emissions. Descriptive allocation of variation assigned 84.8-91.2% of energy and emissions variation to local steps within these ranges. On A40 and RTX 6000 Ada, configurations with fewer steps achieved comparable accuracy with roughly 6-8-fold lower energy consumption and higher accuracy per kWh. These findings support smaller local budgets for energy-efficient federated fine-tuning within the evaluated setting.

Comment
Accepted author manuscript for publication in the Proceedings of the 2027 IEEE Consumer Communications & Networking Conference (CCNC 2027), Las Vegas, Nevada, USA, January 9-12, 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Towards Sustainable Federated Learning via Carbon-Aware Client Selection

cs.DC ·2026-11-06 ·Wentao Gao, Omid Tavallaie, Albert Y. Zomaya
similarity 0.65
Abstract

The Information/Communication Technology (ICT) industry is severely challenging the global environment due to the sharply rising carbon emissions generated by machine learning (ML) workloads. Federated Learning (FL) is one of the prominent distributed ML systems used in applications with billions of client devices, such as Google Gboard and Apple Siri. Nearly half of the total carbon footprint in FL originates from client-side computation during local training. However, existing client selection strategies in FL primarily focus on minimizing energy consumption rather than carbon emissions, despite the fact that carbon impact depends not only on computational load but also on the underlying carbon intensity of the energy source. In this paper, we address this gap by proposing a carbon-aware fair client selection strategy (CA-FCS) designed to minimize the carbon emissions associated with model training on client devices. In contrast to existing approaches for reducing carbon emissions in FL, we incorporate hourly carbon intensity and a realistic energy consumption model developed using empirical measurements from Google Pixel smartphones to estimate client-side carbon emissions in FL. Since repeatedly selecting low-carbon clients may reduce data diversity and degrade global model performance, particularly under non-independent and identically distributed (non-IID) data settings, CA-FCS incorporates fairness into client selection to mitigate this issue. We conduct extensive experiments under realistic FL settings for mobile devices, where client participation is constrained by device availability conditions, such as charging status and Wi-Fi connectivity. The results demonstrate that our method reduces client-side carbon emissions by up to 46% while maintaining competitive model accuracy.

0.12

Measuring the Inference Energy Efficiency of Open-Weight LLMs across Benchmarks, Reasoning Modes, and Hardware

cs.AI cs.PF ·2026-10-09 ·Zeyu Yang, Wes Armour
benchmarkposition similarity 0.65
Abstract

Benchmark scores tell us what an LLM can do, but not how much energy is required to deliver that capability. We directly measure this trade-off for 86 open-weight model checkpoints, evaluated on seven benchmarks and six hardware platforms ranging from a consumer GPU to an eight-GPU server. We find large differences in energy efficiency even among models with similar capability. Most configurations lie away from the score--energy Pareto frontier: they use a median of 2.6--4.8$\times$ more energy than another configuration that scores at least as well, with differences reaching 27$\times$. Reasoning can improve capability, but enabling thinking increases energy by about 3.7$\times$ on average, and the benefit depends strongly on the model family and output budget. Generated-token count is also an imperfect proxy for energy, misordering 18--24\% of model pairs. In contrast, FP8 reduces energy by roughly a quarter with little change in score, while changing hardware largely rescales energy without changing the relative ranking of models. These results show that capability alone gives an incomplete picture of efficiency. We argue that benchmark scores should be reported together with measured energy consumption under a specified serving regime and output budget.

0.36

LLM-PowerTrace: A Dataset of Time-Resolved GPU Power Traces for AI Compute

eess.SY cs.AIcs.OS ·2026-10-28 ·Jiansheng Wang, Jaskeerat Singh, Haochen Xu, Xinyi Li, Mingyuan Yan +4 more
datasetcode/data similarity 0.64
Abstract · In Submission; Code and dataset are available at https://systems-power-review.github.io/training-power-trace-explorer/

AI compute is becoming large and fast-changing electrical loads. Its impacts on data center infrastructure and power grids depend not only on total energy consumption, but also on how their power draw moves over sub-second to minute timescales, including peaks, ramps, and synchronized fluctuations across accelerators. Existing energy benchmarks for large language models (LLMs) report aggregate quantities such as joules per token and rarely release the underlying time-series measurements, leaving these power dynamics poorly characterized and difficult to model. We introduce LLM-PowerTrace, an open dataset of time-resolved, per-GPU power traces for LLM fine-tuning and inference, sampled every 100\,ms on varying NVIDIA platforms paired with complete workload and system metadata. For fine-tuning, LLM-PowerTrace profiles open model families spanning a wide range of model sizes and fine-tuning methods, together with controlled sweeps over batch size, sequence length, precision, parallelism, and checkpointing. For inference, it covers variations in concurrency, GPU frequency, KV-cache and weight quantization, prompt and output lengths, and request-arrival patterns. LLM-PowerTrace profiles a set of open model families across a wide range of model sizes, and controlled sweeps over batch size, sequence length, precision, parallelism, and checkpointing for fine-tuning, and it sweeps concurrency, GPU frequency, KV cache and weight quantization, prompt and output lengths, and request arrival patterns for inference. Built upon power traces, we define power-grid-facing metrics as well as AI-compute power\&energy scaling law for extrapolating beyond the measured settings. Together, LLM-PowerTrace provides a dataset foundation for modeling, forecasting, and managing the fast-changing electrical behavior of AI compute.

0.37

Energy-Efficient Reinforcement Learning for Large Language Models

cs.DC ·2026-11-03 ·Rahul Sharma, Nitin Vegesna, Yanxin Zhang
similarity 0.64
Abstract · Rahul and Nitin are co-first authors

Reinforcement learning for language models alternates between generating responses and training the policy. These stages place different demands on GPUs, creating opportunities to reduce clock frequency with little loss in throughput. Selecting frequencies online is difficult because response lengths change and frequency trials themselves consume time and energy. We present EE-RL (energy-efficient RL), an online controller that selects separate frequencies for generation and training during RL execution. It compares candidate settings with a prediction of the default GPU governor on the same token workload, and keeps the most energy-efficient setting that meets a throughput threshold. The controller then monitors throughput and energy and adjusts frequencies as the workload changes. Fixed-frequency sweeps on H100 and GB200 show GPU energy savings of up to 28.2% per valid training token across synchronous and asynchronous execution, while largely preserving throughput. EE-RL turns this headroom into online savings, reducing GPU energy per valid training token by up to 16.9% at a modest throughput cost.

0.23

Towards Green AI: Evaluating Energy Efficiency for Quantized LLM Inference

cs.LG cs.AIcs.CY ·2026-10-13 ·Petar Basta
similarity 0.63
Abstract

While it is known that quantization of large language models (LLMs) reduces memory usage via lower-bit weights, studies quantifying the resulting impact on energy usage and carbon intensity are scarce. We present the first unified evaluation of weight-only quantization strategies for LLM inference across varying input/output lengths and GPUs, highlighting differences in energy efficiency in addition to accuracy degradation and runtime. We study quantized inference on Llama 2 7B, Phi 3.5 Mini Instruct, OLMo 1B, Qwen 2.5 7B, and Qwen 2.5 14B across GLUE MNLI, MMLU, HumanEval, and GSM8K datasets, evaluating 10 post-training quantization (PTQ) strategies on NVIDIA H100, A6000, A100, and L4 GPUs. We identify a novel trend showing that quantization techniques tend to exhibit peak energy efficiency relative to full-precision baselines when inputs are sufficiently long and outputs are short. Furthermore, we show that quantization strategies become marginally more energy-efficient relative to full-precision models as batch sizes increase, though gains are modest. Notably, fused-kernel implementations such as EETQ int8 and Bitsandbytes int8 offer the highest energy savings, up to 4x compared to FP32 on short text generation, with negligible accuracy loss. Finally, we observe that energy usage closely tracks runtime on our evaluated benchmarks, indicating that, in practice, latency optimization can serve as a reliable proxy for reducing the environmental footprint of LLM services. We conclude with suggested directions for strategically selecting low-carbon quantization strategies based on specific inference requirements.

0.10

D2K-Bench: Can LLM Agents Turn Expert Designs into Efficient GPU Kernels?

cs.LG cs.AIcs.DC ·2026-10-02 ·Daifeng Li, Huiqiang Jiang, Chengruidong Zhang, Wei Wu, Xudong Guo +4 more
benchmark similarity 0.63
Abstract · 30 pages, 4 figures

GPU kernels generated by large language model (LLM) agents can remain less efficient than expert implementations, but runtime alone does not reveal how the gap relates to design discovery and implementation. We introduce D2K-Bench, a diagnostic benchmark of 26 tasks and 85 workloads that measures how effectively agents translate expert design guidance into efficient GPU kernels. The guidance covers L1: high-level algorithmic insights, L2: dataflow design, and L3: low-level optimization tricks, including dependencies among these levels. Pairwise runs with and without guidance share task descriptions, workloads, tools, hardware, and a 350-turn budget. Complementary assessments examine independently proposed designs and the design properties implemented in generated code. Across five models on NVIDIA B200 GPUs, guidance raises correctness over 130 model-task pairs from 93.1% to 98.5% and increases the Performance Score over all 26 tasks from 1.46 to 1.95. For the three frontier models with correct submissions on all 26 tasks in both runs (GPT-6-Astra, Claude-Opus-4.8, and GPT-5.6-Sol), geometric mean speedup increases from $1.69\times$ to $2.49\times$. Across all five models, the mean combined implementation score increases from 57 to 70 out of 100. These results show the value of expert design guidance while identifying design properties that remain unimplemented.

0.19

Could Model Partitioning Make Federated Learning More Sustainable?

cs.DC ·2026-08-14 ·Tobias Frohlich, Tiffany Vlaar, Lauritz Thamsen
similarity 0.62
Abstract · 5 pages, 2 figures. Accepted at the 2nd International Workshop on Low Carbon Computing (LOCO 2026), Lancaster University, United Kingdom, 10…

As federated learning (FL) extends from distributed machine learning between low-power devices to cross-silo scenarios involving edge servers and data centres, its carbon footprint has become a growing concern. Addressing this, methods for sustainable FL align training with low-carbon energy availability or low grid demand and reduce the energy consumption of clients powered by high-carbon sources by decreasing the size of their models. We propose applying model partitioning, which can shift energy consumption by offloading parts of a model to another participant, in response to carbon- or grid-aware signals. Our preliminary findings show that for some partition points, model partitioning can reduce a participant's energy consumption by up to 76% without any significant time or energy consumption overhead compared to non-partitioned training.

0.15

ECO: Energy-Oriented Configuration Optimization for Attention FFN Disaggregated LLM Serving

cs.AR ·2026-10-06 ·Zou Qingyun, Bin Gao, Zhuobin Huang, Weng-Fai Wong, Tulika Mitra +1 more
similarity 0.62
Abstract

Energy-efficient LLM serving requires minimizing serving GPU energy while meeting latency and throughput service-level objectives (SLOs). Attention--FFN disaggregation (AFD) enables separate resource allocation and operating controls for attention and expert computation, but their energy effects remain coupled through the execution pipeline. Realizing its energy-saving potential therefore requires navigating a hierarchical configuration space in which deployment structures constrain admissible controls and shape their end-to-end effects. Finding low-energy configurations that meet SLOs is challenging because physical evaluations are costly and only a small fraction of candidates can be measured. We present Energy-Oriented Configuration Optimization (ECO), which jointly searches deployment structures and their admissible operating controls under a limited measurement budget. ECO constructs a structure-aware energy prior from calibrated stage behavior and pipeline dependencies, then learns residual prediction errors with a Gaussian process. Its cost-aware constrained Bayesian optimization prioritizes measurements according to expected energy improvement while accounting for SLO feasibility, execution success, and evaluation cost, and returns the lowest-energy measured feasible configuration. Across all 16 scenarios on A6000 and A100 with Qwen and DeepSeek, ECO's frozen configurations, evaluated on disjoint requests, reduce serving energy by 40.5\% and increase output token rate by 20.7\% on average relative to baselines while meeting target SLOs. Across the 8 A6000 scenarios, its selected feasible energy averages 33.1\% below generic constrained Bayesian optimization and 25.8\% below genetic search.

0.21