CS Paper Radar

Robust Control Design for LTI Systems with Sampling-Time Jitter

Dieter Schwarzmann, Jan Lunze

eess.SY ·submitted 2026-11-12 16:30 UTC · v1

Abstract

Sampling-time jitter makes a sampled-data control loop time-varying, so standard LTI robust-control synthesis does not apply directly. This paper reformulates dynamic output feedback design under bounded, unmeasured sample-to-sample jitter as a robust-control problem. The exact zero-order-hold model is decomposed into a nominal time-invariant plant and a memoryless, time-varying uncertainty block with a norm bound representing the sampling-time jitter. As the block is memoryless, the operator small-gain condition for the time varying loop reduces to a standard robustness test with a matrix norm bound. It is shown that the same test also guarantees uniform exponential stability for every admissible jitter sequence. Embedding the decomposition into a generalized plant with performance channels serves two synthesis objectives with standard robust-control tools: Robust stability with optimized nominal performance through structured H-inf synthesis, and robust performance through mu synthesis with constant scalings. A numerical example shows that jitter can destabilize a control loop with a nominal H-inf controller, whereas both robust designs remain stable and the robust-performance design is less sensitive to jitter at the cost of nominal performance.

Comment
Submitted to ECC2027

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Data-Driven Controller Synthesis from Sampled and Uncertain Frequency Response Estimates using Integral Quadratic Constraints

eess.SY ·2026-10-14 ·Luuk Marceau Spin, Maurice W. P. M. H. Heemels, Nathan van de Wouw, Roland Toth
similarity 0.62
Abstract · 15 pages, 6 figures, none other publications

In this paper, we develop a novel MIMO controller synthesis method that relies solely on frequency-domain data of discrete-time systems. The approach is based on an iterative design procedure using \emph{integral quadratic constraints} (IQCs). It generalizes existing data-driven methods that approximate semi-infinite IQC conditions by enforcing them on a finite set of measured frequency points. Such approximations do not provide guarantees on the continuous frequency axis and may fail to capture inter-frequency behavior. We address this limitation by formulating a convex optimization problem that preserves robustness guarantees over the entire frequency range. In particular, the proposed method explicitly accounts for inter-frequency behavior of both plant and controller, leading to certified robust stability and performance. The effectiveness and computational efficiency of the approach are demonstrated using experimentally obtained frequency response data from industrial-grade semiconductor equipment. The synthesized controller is implemented on the physical setup, and its performance is validated in real-time experiments.

0.35

A Unified Framework for Robust Data-Driven Model Predictive Control with Terminal Ingredients

eess.SY ·2026-10-04 ·Zhaohua Yang, Nan Bai, Pengyu Wang, Ling Shi
similarity 0.58
Abstract · Submitted for publication

This paper proposes a unified framework for robust data-driven model predictive control (MPC) with terminal ingredients for unknown linear time-invariant systems. Based on Willems' fundamental lemma, a single offline input-output trajectory is used as an implicit model, while online implementation only requires past input-output measurements. Bounded measurement noise is considered in both offline and online output data. The framework consists of an offline stage, where robust terminal ingredients are designed directly from noisy data, and an online stage, where these ingredients are incorporated into a one-step MPC scheme. Recursive feasibility of the proposed framework and practical exponential stability of the closed-loop system are established. Numerical results illustrate the performance tuning capability of the terminal set, with particularly pronounced benefits for short prediction horizons, and show that the proposed framework achieves performance comparable to data-driven MPC without terminal ingredients while requiring a reduced prediction horizon and less online computation.

0.13

Exact Noise Limits for Bounded Scalar Stabilization Experiments

eess.SY math.OC ·2026-09-30 ·Alexey Peregudin, Ngoc Tuan Dinh
similarity 0.58
Abstract · 6 pages, 1 figure. Submitted to the American Control Conference (ACC)

How much unknown process noise can a bounded experiment tolerate while still establishing that the plant can be stabilized? We answer this question for scalar discrete-time systems with bounded inputs, exact state measurements, and a disturbance-energy budget proportional to the experiment length. We distinguish individual stabilizability of every consistent model, stabilization by one common gain, and a common quadratic certificate. We determine their exact noise ceilings for every drift. The last two requirements coincide; individual stabilizability generally tolerates more noise. Bounded periodic inputs approach the ceilings, while adversarial disturbances prevent their attainment. We also determine the long-horizon limits. For unstable plants, a short experiment can establish individual stabilizability at noise levels where every sufficiently long experiment fails. The same obstruction yields upper bounds for multidimensional systems with real eigenvalues. Input design may use plant knowledge, but certification uses only the recorded data and noise bound. The results therefore provide fundamental robustness benchmarks for unknown-plant designs.

0.41

Data-Driven Stochastic LQR Control with Probabilistic Guarantees and Uncertainty Refinement

eess.SY ·2026-11-03 ·Amir Modares, Themistoklis Charalambous, Hamidreza Modares
similarity 0.58
Abstract

This paper presents a probabilistic framework for the direct, data-driven synthesis of the stochastic linear- quadratic output-feedback control for linear systems sub- ject to process and measurement noise. Using delayed input-output measurements, we derive a lifted parameter- ization together with an equivalent lifted linear quadratic cost, enabling controller synthesis without explicitly identi- fying the lifted dynamics. Two complementary closed-loop formulations, based on trajectory and covariance represen- tations, are then developed, whose uncertainties depend only on the realized but unknown lifted noise. We char- acterize the relative performance of the two formulations in finite-data regimes. High-probability uncertainty bounds are developed for realized noises, leading to a convex optimization solution to the problem, whose feasibility cer- tifies probabilistic mean-square stability (p-MSS) and per- formance guarantees. To reduce conservatism, Gaussian zonotopes are used to refine uncertainty sets by elimi- nating noise realizations inconsistent with measured data, and a novel intersection rule enables the consistent fusion of data-driven and physics-informed information. These components are integrated into an adaptive framework that unifies indirect (identification-based) and direct (control- oriented) data-driven linear-quadratic output-feedback con- trol. Unlike existing direct data-driven LQR methods that verify stability a posteriori, our by-construction approach achieves robust stability alongside reduced conservatism and superior performance. Simulation results show that the proposed controller approaches the ideal optimal solution while outperforming existing data-driven methods under noisy measurements.

0.19

A Robust Control Architecture for Multirate Systems and their Interconnections

eess.SY math.OC ·2026-10-23 ·Julian Berberich
unusual similarity 0.58
Abstract

We introduce a framework for analyzing and designing linear multirate control systems and their interconnections through the lens of robust control. The proposed approach models multirate systems as impulsive systems with multiple independent jump maps and corresponding jump-time sequences. We tackle analysis and design problems with stability, dissipativity, and robustness objectives, relying on a multi-clock-dependent Lyapunov function parameterization. Further, we develop a compositional approach for analyzing interconnections of multirate systems based on individual dissipativity properties. The theoretical conditions can be verified via linear matrix inequalities and they require weak assumptions on the sampling rates, allowing for asynchronous and time-varying sampling rates with or without separated time scales. The practicality of the framework is demonstrated with numerical examples.

0.24

Robust Data-Driven Output Feedback for Systems With Unknown Input Delays

eess.SY ·2026-10-31 ·Ngoc Tuan Dinh, Ba Huy Nguyen, Alexey Peregudin, Egor Dogadin
similarity 0.58
Abstract · 6 pages, 1 figure. Submitted jointly to IEEE Control Systems Letters (L-CSS)

In a history-feedback realization, an input delay increases memory without increasing the number of unknown physical coefficients. We use this structure to design output-feedback controllers for discrete-time systems with one input, one output, and known undelayed order, using noisy input-output data. For a known delay, we derive a necessary and sufficient linear matrix inequality for common-quadratic stabilization of all models consistent with the data. Optimizing its equation-error bound gives a robustness margin for the measured record. For an unknown constant delay in a known interval, we characterize noiseless delay ambiguity and give a sufficient condition for one controller to stabilize all models for every delay consistent with the error bound. Under stated excitation and nondegeneracy assumptions, this procedure is feasible for all sufficiently small equation errors. Numerical examples compare robustness at equal controller memory and show that certified stabilization can succeed while distinct delay models remain compatible with the same data.

0.31

Robust Data-Driven Output-Feedback Reference Governor with Quantified Model Uncertainty

eess.SY ·2026-11-16 ·Tam W. Nguyen
benchmark similarity 0.57
Abstract · 45 pages, 4 figures, 2 tables

This paper constructs a data-driven reference governor (DDRG) from input--output data and supplied deterministic disturbance bounds. A data-consistent model set quantifies the uncertainty remaining in each prediction direction. With exact output measurements, the DDRG propagates output-history uncertainty while retaining exact applied-reference histories and converts the resulting tubes into constraint margins. Under a common contraction condition in a selected history norm, explicit terminal feasibility inequalities certify infinite-horizon continuation under a held reference and yield a closed invariant admissible set. A scalar update selects the largest certified step toward the requested reference, with recursive feasibility and constraint satisfaction from certified initialization. A separate bounded-measurement-noise extension derives the errors-in-variables model set and the additional physical-output margin through a measured-history certificate. On the coupled benchmark, longer nested records reduce one-step prediction disagreement at the probe regressor, and propagation accounts for most of the gap between the tube and true-model envelopes at the reported constraint row and prediction step.

0.25

An Adaptive-Sampling Control Framework for Constrained Linear Systems with Robust Safety Guarantees

eess.SY ·2026-09-19 ·Spencer Schutz, Charlott Vallon, Francesco Borrelli
similarity 0.57
Abstract

Adaptive-sampling control balances control performance with resource efficiency. However, existing methods either fail to guarantee robust constraint satisfaction during rate transitions or require computationally expensive online optimization. This paper proposes an adaptive-sampling control framework for linear systems subject to polytopic state and input constraints and bounded additive disturbances. Given a time-varying reference control update rate provided by a reasoner, our framework continuously calculates Model Predictive Control (MPC) update rates that ensure robust constraint satisfaction at all time steps. Offline, robust M-step hold control invariance is used to precompute invariant sets for a list of update rates and transition sets between them. Online, these sets are used in real time to guarantee recursive feasibility and finite-time transitions to the reference update rate. The utility of the architecture is demonstrated in a cruise control simulation.

0.18