CS Paper Radar

An Invariant Neural-Network Eddy-Viscosity Closure with Iterative Solver Coupling for Molten Salt Fast Reactor Thermal-Hydraulics

Zaid Abulawi, William Oliveira, Akzhol Almukhametov, Jun Fang, Ling Zou, Rui Hu, Stefano Lorenzi, Yang Liu

cs.LG physics.flu-dyn ·submitted 2026-11-12 16:41 UTC · v2
theory

Abstract

System thermal-hydraulics codes such as the System Analysis Module (SAM) close turbulence on coarse meshes with algebraic zero-equation mixing-length models. These models cannot represent the non-equilibrium turbulence, flow separation, and large-scale recirculation of open-cavity advanced reactors. We develop an invariant neural-network eddy-viscosity closure for SAM and apply it to the Molten Salt Fast Reactor (MSFR). The closure predicts the turbulent kinetic energy and timescale of each element from the flow and geometry of its neighbors, without solving turbulence transport equations. The resulting non-negative eddy viscosity enters the implicit diffusive operator, which keeps the momentum equations well conditioned. We prove that the closure is exactly invariant to translation, Galilean boost, rotation, reflection, and neighbor ordering. A network trained on high-order Nek5000 fields sees a different feature distribution on the coarse SAM mesh. We remove this covariate shift by iteratively retraining the network on SAM flow states against fixed Nek5000 targets. For a held-out steady state, the coupled closure reproduces the single recirculation cell and eddy-viscosity plume of the Nek5000 reference. In a 120 s pump-coastdown transient, it halves the velocity error of the mixing-length model, from 37.6% to 17.7%, and matches the Nek5000 eddy viscosity with a time-averaged relative error of 12%. The remaining velocity error comes from the coarse mesh. The coupled transient takes about 0.2 core-hours, compared with about 330 core-hours for Nek5000. The results show that the closure can recover two-equation RANS turbulence behavior in a coarse-mesh system code at a small fraction of the CFD cost.

Comment
42 pages, 12 figures

Closest papers

Nearest neighbours by meaning across the whole index.

CFD-driven symbolic regression of RANS transition models

cs.LG physics.flu-dyn ·2026-11-02 ·Louenas Zemmour, Xavier Gloerfelt, Paola Cinnella
similarity 0.60
Abstract

Laminar-turbulent transition governs skin friction, heat transfer and losses in turbomachinery, yet Reynolds-averaged Navier-Stokes (RANS) transition models rely on empirical correlations and hand-calibrated activation functions whose structural deficiencies cannot be resolved by recalibration. We propose a CFD-driven sparse symbolic regression framework to learn interpretable, closed-form corrections to the production and destruction activation functions in the intermittency equation of the local, Galilean-invariant $k$-$ω$-$γ$ model of Ge et al. Each correction combines a polynomial of a local pressure-gradient parameter, controlling amplitude and sign, with a bounded exponential of local flow features, controlling spatial support. This construction bounds the corrections without ad hoc limiters. Coefficients are identified by gradient-free optimization with the RANS solver in the loop, accelerated by POD-Kriging field surrogates, using mean-velocity data from wall-resolved large-eddy simulations (LES) of the ERCOFTAC T3 flat-plate cases. Elastic-net hyperparameters are selected automatically through bi-level optimization with leave-one-case-out cross-validation. The resulting model retains 11 of 21 candidate terms, compared with 20 under conventional grid-search tuning, while achieving comparable or slightly better accuracy on training and unseen cases. Both approaches recover the same leading-order correction. Applied without retraining to the transonic LS89 turbine cascade, far beyond the training envelope, the augmented model remains numerically robust and improves heat-transfer predictions at all four operating points, reducing errors by up to 70% where the baseline predicts premature transition under high freestream turbulence. Residual errors in transition onset and length highlight the limits of training on flat-plate data alone.

0.25

CLNO: Conservative Local Neural Operator for Compressible Flow Prediction

cs.LG math.NA ·2026-10-12 ·Buxuan Wang, Rongzu Li, Qingsong Zou
similarity 0.57
Abstract · 23pages, 15 figures

We propose a conservative local neural operator (CLNO) for accurate and generalizable autoregressive prediction of compressible flows. Building upon the locality and translation invariance of the local neural operator (LNO), CLNO introduces a conservative evolution framework based on local subdomains of fixed physical size, separating local mean-state evolution from fine-scale reconstruction. The flow is encoded into subdomain-integrated conservative states and fine-scale features, while a shared local network predicts interface fluxes for finite-volume updates that enforce discrete conservation. A convolutional reconstruction network recovers fine-scale structures using zero-mean basis functions, preserving the updated local means and providing information for subsequent evolution. To accommodate different physical parameters, Reynolds--Mach number conditioning modulates the encoding, flux-prediction, and reconstruction networks, enabling a single model to learn parameter-dependent dynamics and generalize to unseen parameter combinations without retraining. CLNO supports prediction across spatial resolutions, computational domain sizes, and boundary conditions. Numerical experiments demonstrate improved generalization and competitive or higher accuracy compared with LNO, including order-of-magnitude error reductions in representative cases, at approximately three to five times the inference cost on periodic benchmarks. These results demonstrate accurate, generalizable, and physically consistent flow prediction through conservative local evolution and fine-scale reconstruction.

0.15

Flow Mesh: A Velocity-Regularized Flow Matching Framework for Stable Distributional Modeling of Physical Fields on Unstructured Meshes

cs.LG physics.flu-dyn ·2026-10-23 ·Siddharth Verma, Jaewan Park, Jay Phil Yoo, Kazuma Kobayashi, Souvik Chakraborty +1 more
similarity 0.57
Abstract

Thermal-fluid field distributions underpin the analysis and operation of energy infrastructure, from nuclear-reactor cooling channels to industrial heat exchangers, but resolving these distributions through computational fluid dynamics requires prohibitively large simulation ensembles. Their complex geometries also demand unstructured meshes that are poorly accommodated by generative models developed for regular grids. Here we introduce FlowMesh, a generative framework that combines permutation-invariant mesh encoding with deterministic latent flow matching and an l1 penalty on the learned transport velocity. FlowMesh generates full-field realizations directly on fixed unstructured meshes without auxiliary grid interpolation or a stochastic denoising chain. Across lid-driven-cavity, pressurized-water-reactor subchannel and heat-exchanger datasets, evaluated over six matched training seeds, FlowMesh achieves macro-averaged probability-density-function coverage of 91.7%-97.0%, exceeding an architecture-controlled latent diffusion model by $11.6$--$45.4$ percentage points. Latent-velocity regularization increases coverage by $3.8$ percentage points for reactor flows and 1.1 points for heat-exchanger flows, while reducing temperature-field Kullback--Leibler divergence by 1.7-2.4-fold. Each full-field realization requires 1.23 \pm 0.15 s, providing a 585--1902-fold wall-clock acceleration over computational fluid dynamics. FlowMesh therefore makes large-scale generative characterization of thermal-fluid states computationally feasible, providing a foundation for data-driven analysis and digital-twin development in fixed-geometry energy systems.

0.22

Interpretable Multifidelity Learning with Kolmogorov-Arnold Networks for Spatiotemporal Nuclear Reactor Flow Modeling

cs.LG ·2026-10-04 ·Meredith Eaheart, Majdi I. Radaideh
similarity 0.57
Abstract · 33 pages, 15 figures,9 tables, and a preprint under peer review

High-fidelity computational fluid dynamics (CFD) simulations of nuclear reactor systems are computationally expensive, motivating machine learning methods that reduce cost while preserving accuracy. Multifidelity surrogate modeling addresses this by combining inexpensive low-fidelity data with limited high-fidelity data. This work investigates whether the high-fidelity data required to predict the spatiotemporal mass flow rate across all 193 fuel assemblies of a pressurized water reactor (PWR) core can be reduced, comparing black-box multifidelity feedforward neural networks (MFNNs) with interpretable multifidelity Kolmogorov-Arnold Networks (MFKANs). Cross-fidelity correlation across the core is weak, making this a challenging multifidelity problem, and neither architecture predicts the transient particularly well in absolute terms. MFKAN nonetheless performs comparably to MFNN for one-time-step-forward prediction while also providing closed-form symbolic equations unavailable with MFNN. To address the scarcity of CFD transients, with only one available per fidelity level, TabDDPM-generated synthetic data was used to augment cross-fidelity forecasting. KAN and FNN achieve comparable self-evaluation accuracy (Pearson correlation of roughly 0.73--0.81), but both perform poorly at true cross-fidelity forecasting (correlations of 0.03--0.06). Assembly-level analysis shows that each assembly's forecast correlation tracks its real cross-fidelity correlation for both architectures ($r=0.840$--$0.896$ for KAN, $r=0.804$--$0.903$ for FNN), confirming that forecasting accuracy is fundamentally limited by how correlated the fidelity levels already are. Overall, KAN-based multifidelity modeling achieves accuracy consistently comparable to MFNN across all settings, while additionally providing symbolic equations that match or exceed the spline representation's accuracy.

0.27

Well-posedness of neural turbulence closures and tangent dissipation

cs.LG physics.flu-dyn ·2026-09-17 ·Zhen Zhang, George Em Karniadakis
unusual similarity 0.55
Abstract · 20 pages, 4 figures

A neural turbulence closure defines a new boundary-value problem, $R(U)=N(U)+F(U)=0$, with a coupled Jacobian $J(U)=N'(U)+F'(U)$, where $N$ is the original mean-flow operator and $F$ the learned closure. We establish two consequences of global tangent dissipation. For a monotone original operator, a positive uniform margin supplied by the original operator and closure together guarantees existence, uniqueness and a global inverse-sensitivity bound relating a posteriori solution error to the a priori residual. For a general original operator, a dissipative closure cannot worsen tangent dissipation, but this alone does not guarantee uniqueness. Tangent dissipation depends on both diffusion and reaction. We study two complementary ways to promote it: (1) an exact-integral construction enforcing non-negative tangent diffusion while leaving reaction unconstrained, and (2) a penalty on tangent-reaction violations at sampled states. Tangent diffusion enters the Jacobian, and non-negative secant eddy viscosity alone does not control its coercivity. We conduct tests with channel flow at $Re_τ=180$--$5200$, which provides a strongly monotone baseline. Both constrained closures reach accurate solutions in all 50 training-seed/Reynolds-number cases. At $Re_τ=1000$, we conduct tests with 10,000 starts for one fixed network per closure and we find one root for each constrained closure and multiple roots for the other closures. Although this does not prove uniqueness, it provides strong empirical evidence for uniqueness of the tested constrained closures. At $Re_τ=5200$, the construction and penalty reduce the reported inverse sensitivity relative to the original operator by approximately $372\times$ and $11\times$, respectively.

0.54

Fuse-PINN: Combining Finite Element Methods and Physics-Informed Neural Networks to enable massively parallel simulations of non-linear PDEs

cs.LG physics.plasm-ph ·2026-11-13 ·Stanislas Pamela, Nicolas Pailliez, Emmanuel Franck, Victor Michel-Dansac, Laurent Navoret +1 more
published similarity 0.55
Abstract · 9 pages plus Appendix, 11 figures, 1 table. Rejected at ICLR

Research in the domain of Physics-Informed Neural Networks applied to PDE modelling has advanced significantly in recent years, providing a wide ecosystem of novel methods. However, one frequent limitation is the inability of PINNs to scale out on High-Performance Computing architectures to address more ambitious challenges, particularly non-linear physics models with turbulent dynamics in large spatial domains. Typical studies restrain demonstrations to toy models with simple physics equations, few variables, and rarely any complex non-linear dynamics evolved over long timescales. Part of the AI community has even adopted the idea that "PINNs don't scale". This work proves otherwise. We present a mathematically robust formulation of Finite-Element-Method for Neural Networks (FEM-NN) implemented into a comprehensive, modular framework: Fuse-PINN. This formulation provides the basis for a sclable parallelisation of Physics-Informed Neural Networks on GPU-based HPC systems. Furthermore, an Energy Natural Gradient Descent optimiser is implemented to allow high-precision convergence. Fuse-PINN is demonstrated on physics models relevant to Magnetic Confinement Fusion, including non-linear convective models with fine-scale dynamics. Near-perfect scaling is achieved on multi-GPU runs with increasing problem size.

0.30

Unifying Central Flow, Rod Flow, and the Edge Coupling

cs.LG stat.ML ·2026-11-05 ·Eric Regis, Sinho Chewi
similarity 0.54
Abstract

At the edge of stability, the iterates of gradient descent oscillate along the sharp directions of the Hessian. This poses a significant challenge for continuous-time models as the usual continuous-time approximation -- the gradient flow -- admits no oscillations. Several continuous-time models have been proposed to capture the behavior at the edge of stability, among them central flow and rod flow. Although both models can be interpreted as performing a coarse-graining in time, the connection between them remains poorly understood. Here we show that both flows can be derived from a third object, the edge coupling: a functional on consecutive iterates whose critical points are the fixed points and period-two orbits of gradient descent. It is revealed that the two flows correspond to coarse-grainings at different time scales. Rod flow coarse-grains over only the fastest time scale, while central flow coarse-grains over both the fast and intermediate time scales. Furthermore, using the edge coupling, we derive rod flows and central flows for momentum methods such as heavy ball and Adam. We verify the derived flows experimentally on representative neural network architectures, where they track the discrete iterates throughout all phases of training -- including the transition from the stable regime to the edge of stability.

0.24

pcNN-SN: a physics-enhanced predictor-corrector neural network algorithm coupled with the discrete ordinates method for neutron transport equations

cs.LG physics.comp-ph ·2026-09-02 ·Cong Liu, Junxia Wei, Shuai Wang, Heng Yong
similarity 0.54
Abstract · 35 pages, 16 figures

Super-resolution machine learning methods hold promise for addressing the high computational costs associated with high-dimensional features in traditional transport simulations. This paper proposes a physics-enhanced neural network coupling algorithm for discrete ordinates (SN) transport calculations. Based on high- and low-accuracy data, we develop a predictor-corrector neural network (pcNN) to predict correction factors for coarse-grid solutions. Based on transport equations, local physical features containing subgrid-scale information are selected as network inputs. Dimensionless transformation of physical quantities reduces the input space dimensionality and narrows the range of parameter distributions, thereby facilitating network training. Physical constraints are incorporated into the network model, and the corrected solution retains its original conservation properties. pcNN and SN transport sweeps are internally coupled, and numerical solutions are corrected online. Numerical results demonstrate that this algorithm can effectively improve coarse-grid solutions to achieve a level of accuracy comparable to that of fine-grid results. The physics-based network design enables the model to demonstrate a certain degree of reusability under different computational conditions. Compared to mesh refinement, the pcNN-SN algorithm reduces the computation time for the three-dimensional test problems by more than 60%.

0.18