CS Paper Radar

Choosing Quantized Code LLMs by File Size and Energy per Solved Task

Aditi Patodiya

cs.SE cs.LG ·submitted 2026-11-13 00:04 UTC · v1

Abstract

A developer running a code assistant on a laptop downloads one model file, and local inference moves the energy of every request onto that machine. A common rule says a larger model at lower precision tends to beat a smaller one at higher precision. We ran 24 GGUF files of Qwen2.5-Coder at four sizes on a fanless MacBook Air M2 and priced each in energy per solved task on 542 EvalPlus tasks. The result is a selection guide indexed by Ollama's listed file size, with an evidence label on each pick. At 1 and 2 GB it picks the q4_K_M files of the 1.5B and 3B models, both on the correctness and energy frontier under every accounting. At 3 GB as listed, the larger-model rule picks 7B-q2_K, the only measured 7B file that fits, and there it does not pay. That file brings no significant gain in solves over the 2 GB pick, 3B-q4_K_M, and the 90% CI limits any 3B-q4_K_M deficit to 2.4 points. Yet 7B-q2_K needs 2.03 times the energy per solved task on CPU, GPU and memory rails, or 1.66 to 1.81 times on whole-system power. On HumanEval+, five alternating session pairs give a ratio of 1.925 against 1.956 in the main grid. At 8 GB, 7B-q6_K buys a significant gain over the 2 GB pick at a higher energy price. From 1.5B up, q4_K_M trails the highest precision measured at its size by less than 3 points (90% CI). We release per-task results, power logs and the analysis script.

Comment
9 pages, 2 figures, 3 tables. Submitted to GREENS 2027 (11th International Workshop on Green and Sustainable Software, co-located with ICSE 2027). Reproducibility package: https://doi.org/10.5281/zenodo.24016482

Closest papers

Nearest neighbours by meaning across the whole index.

Tetra: Serving Leech-Lattice Quantized LLMs at 2.7 Bits per Parameter

cs.LG ·2026-09-28 ·Pier-Jean Malandrino
code/data similarity 0.65
Abstract · 15 pages, 4 figures, 8 tables. Code, measurement logs and preregistrations: https://github.com/pjmalandrino/llvq

Leech-lattice quantization gives good quality at two bits per weight, but its codebooks hold more than 10^14 points, too many for a lookup table. Our earlier kernel expanded the codes at load time and read 4.804 bits per weight from GPU memory for 2 bits of code. We present Tetra, a new codebook on the same lattice. A 24-weight block still takes 48 bits, most of which index a 64-state trellis of the Golay code and one shared 16 KiB table. The kernel decodes a block with six table loads and two small lookups inside the matrix-vector product, and reads 2.148 bits per weight. For full models, we retrain one scale per matrix row, store the matrices that lose the most as 4-bit integers, and pay for them with 4-bit embedding tables. Our Qwen3-4B, 8B and 14B files hold 2.73, 2.70 and 2.73 bits per parameter over the whole model. They score 63.37, 69.58 and 75.66 on the full MMLU test set, 4.76, 4.21 and 2.46 points below 4-bit AWQ at 5.3 to 6.0 bits per parameter. They generate 113.8, 95.0 and 57.2 tokens per second in our engine. On GSM8K, through the served kernel, they lose 9.63, 4.62 and 3.26 points to FP16. At 4B our file scores 23.6 points above llama.cpp's IQ2_XXS (2.48 bits per parameter). Every number we measured for a table or figure comes from one NVIDIA L40S GPU. We preregistered the main experiments.

0.33

Spend Bytes on Breadth: Precision-Count Trade-offs for Decode-Time KV Compression in Long Chain-of-Thought Reasoning

cs.CL ·2026-10-05 ·Runguo Li
similarity 0.59
Abstract · 17 pages, 4 figures, 13 tables

Reasoning models write most of their KV cache while decoding long chains of thought (CoT), so the cache has to be compressed online under a fixed memory budget. Decode-time methods mostly decide which tokens to evict. We ask how a fixed byte budget should be split between the number of cached tokens and their precision. BreadthKV spends the bytes on more tokens at low precision, combining quantization with eviction, and picks the bit-width for each model and budget with a 60-problem end-to-end calibration, since offline attention error does not predict it reliably. On three reasoning models and four math and science benchmarks, it scores above eviction alone in 17 of 18 settings and produces shorter outputs. Much of what eviction loses comes from derailed runs, which keep reasoning until the length cap without reaching an answer. On Qwen3-8B at our tightest budget, eviction sends 91% of AIME samples to the cap and BreadthKV 40%. Under the same protocol, BreadthKV is statistically indistinguishable from a joint rate-distortion allocator (RDKV) that uses 27% more KV memory-time, and it outperforms our re-implementation of ThinKV.

0.20

Embeddings Are Overpriced? A Frozen 16 MB Vocabulary for Small and Ternary Language Models

cs.CL ·2026-10-15 ·Sai Kiran Bathula
code/data similarity 0.59
Abstract · 9 pages, 2 figures, 6 tables. Code, data, checkpoints and per-question results: https://huggingface.co/QLNI/embeddings-are-overpriced. Prepr…

In a small language model the vocabulary is the single largest part. In Gemma 3 270M the embedding table holds 168M of 268M parameters, and because quantisation methods leave the embedding in 16-bit, it is also most of the file once the rest of the model is compressed. We ask what that table actually buys. We replace it with one frozen table of 512-bit codes, 16 MB, with no trainable parameters, derived once from a pretrained embedding by principal-component projection and sign binarisation, and we train the same Gemma-shaped body from scratch on the same 2.05B tokens with and without it. The learned table buys 0.20 nats of validation loss for 2.6 times the trainable parameters, but on LAMBADA, HellaSwag and PIQA the frozen-table model is better or tied; only ARC-Easy favours the learned table. With a ternary BitNet b1.58 body the whole model is a 46 MB file, still ties the float model on LAMBADA and PIQA, and on a laptop CPU generates 615 to 740 tokens per second in 62 MB of memory, five to six times the speed of the float model's 8-bit GGUF in llama.cpp at a seventh of the memory. The frozen table wins by 1.7 to 2.3 nats on rare words, accepts 10,000 new words after training with a 3% cost where the learned table collapses by 43%, and all of it is released with the weights, the data and every evaluation answer.

0.50

Green Code or Costly Code? Evaluating the Energy Costs of Iterative LLM-Based Code Optimizations

cs.SE cs.AI ·2026-10-23 ·Sadra Emami, Benjamin Weigell, Mohammad Reza Mousavi, Gunel Jahangirova, Hugo Araujo +1 more
top venuebenchmarkcode/data similarity 0.59
Abstract · Accepted at the 49th IEEE/ACM International Conference on Software Engineering (ICSE 2027)

Large Language Models (LLMs) are increasingly used to optimize code for performance. This practice often assumes that improvements in execution speed naturally translate into overall lower energy consumption. We challenge this assumption empirically by measuring whether performance-optimized code produced by LLM self-refinement pipelines is also energy-efficient relative to canonical human reference solutions, and whether the energy cost of the optimization process can be offset by subsequent execution-time savings. We evaluate 11 open-source models across four decoding configurations on all 1,000 problems of EffiBench, a state-of-the-art performance benchmark, while collecting per-process, hardware-level energy measurements throughout. Inference energy spans 0.79 to 8.68 MJ across model-variant pairs, which is roughly equivalent to the energy of 250 to 2800 GPT-4.1 queries. Limiting the maximum number of output tokens has the largest impact, reducing energy use by up to 69% compared to the default configuration. On the execution side, 42 of 44 configurations produce code that consumes more energy per problem than the canonical human reference, with overheads ranging from +4% to +886%. The two exceptions achieve only marginal gains, with break-even points on the order of 10^6 to 10^7 executions. Mixture-of-Experts architectures consume substantially less inference energy than equivalently-sized dense models without sacrificing correctness, making architectural choice a more consequential sustainability lever than decoding parameters. Performance optimization and energy efficiency are not always aligned goals: LLM self-refinement consistently produces faster-seeking but energy-heavier code relative to what a human engineer would write. All artifacts are available at https://doi.org/10.5281/zenodo.23598170.

0.41

Quantization Amplifies Determinism, Not Bias: Scale-Dependent Behavioral Effects of Serving-Time Weight Compression

cs.AI ·2026-09-07 ·Dachi Kurtskhalia
similarity 0.58
Abstract · 8 pages, 3 figures. Under review at the NeurIPS 2026 Workshop on Deployable Small Foundation Models (LIGHT)

Weight quantization largely determines the economics of serving open-weight LLMs. Its costs are usually assessed with capability benchmarks, on which 4-bit quantization of mid-sized models is often considered "nearly free." We examine a different question: when several answers are valid, does quantization change what a model chooses to say? We serve three checkpoints (Qwen3-8B/14B/32B) at three weight precisions (W4A16 AWQ, W8A16 FP8-Marlin, and bf16), holding the hardware, software, and sampling configuration constant, and collect approximately 71,000 completions paired by prompt and seed across two custom, leak-checked prompt batteries. We pre-specified the analyses in three waves in version control. At 8B, int4 reduces output diversity: the probability that two samples for the same scenario recommend the same brand increases by 5.1 percentage points (prompt-paired sign-flip test, Holm p = .023; reproduced at +4.4pp on a full regeneration of the arm), and lexical diversity falls substantially (TTR -0.011, standardized effect -0.51; robust to a length-controlled measure). At 14B and 32B, no content-concentration measure reaches significance; instead, stylistic drift emerges (em-dash rate +0.46/1k words at 14B and +0.61/1k at 32B, both Holm p <= .0024). Pre-specified tests of stereotype direction are null at every scale: outputs concentrate on the modal answer for each prompt rather than on stereotypical answers. Mechanistically, the token-level distribution becomes flatter (decision-token entropy +0.091 bits, p = .015) while the semantic distribution, measured directly from first-token log probabilities, becomes more concentrated (collision +2.6pp, p = .023): individual tokens become less predictable even as meanings become more repetitive. At 8B, the smallest size tested, AWQ-int4 serving measurably narrows the range of suggestions; audits should assess concentration as well as bias.

0.17

TableTune: Measured, Self-Correcting Draft-Length Tables for Dynamic Speculative Decoding

cs.ET cs.AI ·2026-10-28 ·Abhishek Malvankar, Paul Castro, Nick Mitchell
similarity 0.58
Abstract

Speculative decoding speeds up large language model (LLM) serving only while the GPU has spare compute, so the best draft length, the number of tokens a small drafter guesses per step, shrinks as the batch grows. vLLM lets operators set the draft length for each batch size with a hand-written table, but nothing measures or corrects that table. We present TableTune. Its tuner times the decoding step for every batch size and draft length on vLLM's own serving path and computes, in minutes, the table that maximizes throughput. Its controller, a vLLM plugin, tracks how many guesses are accepted in live traffic and rebuilds the table while serving. We measure TableTune only against other ways to speculate. On an H100, the tuned table delivers at least 94% of the throughput of the best fixed draft length at every load in four of five drafter settings (88% in the fifth) without the operator having to know which length that is. Against reimplementations of TurboSpec- and Nightjar-style control on the same engine, its worst-case loss is never higher than theirs, and with the EAGLE-3 drafter it is 3% against 9% and 12%. On a mixture-of-experts model, vLLM's documented table loses up to 18% and the tuned table at most 3%. Starting from mistuned tables, the controller raises throughput by up to 58% (up to 45% on vLLM's default runner), and after a workload switch with the DFlash drafter it recovers 96% of a stale table's loss. In llm-d's optimized-baseline deployment as shipped, two Qwen3-32B replicas on four GPUs, the tuned table is up to 32% faster than a fixed draft length of 3 and up to 25% faster than vLLM's documented table at high load, and the controller raises the documented table's throughput by up to 29%.

0.31

Beyond Accuracy: How Quantization Affects Coding Agents

cs.CL cs.AI ·2026-11-02 ·Areej Mehboob, Muhammad Ali Shafique, Muhammad Usman Qadeer, Hamza Farooq
published similarity 0.57
Abstract · Accepted at the NeurIPS 2026 Workshop on Small Language Models for Agentic Systems (SLM-Agents), Paris, France

Agents are increasingly used for coding tasks, but the inference cost of large language models (LLMs) limits where they can run. Quantization reduces model size, but its effects on coding agents that execute and revise programs remain underexplored. We compare BF16 with 4-bit AWQ and GPTQ for Qwen2.5-Coder-Instruct (7B, 14B, and 32B) and Devstral-Small-2507 (24B) on OJBench coding problems across three seeds. We detect no statistically significant accuracy loss for any of the coding agents. However, final accuracy can conceal substantial behavioral changes: AWQ reduces Qwen-7B one-shot solves from 17 to 0 while increasing loop-based solves from 10 to 25. All Qwen-32B successes involve tool use, whereas Devstral rarely makes a valid executor call. Failure profiles also differ: Qwen-32B produces far more compilation errors than the smaller Qwen models, rising slightly under quantization, while Devstral's failures shift significantly from runtime errors toward wrong answers and timeouts. These findings indicate that quantization robustness in coding agents should be assessed through solution trajectories, tool use, and failure modes, in addition to final accuracy.

0.22

GGUF-Metadata Prediction of Single-Sequence llama.cpp Throughput Across Three Systems

cs.AI cs.LGcs.PF ·2026-09-14 ·Xinyu Qiu, Chuhong Xu, Bo Su, Ziyao Chen, Ruiyang Xu +1 more
similarity 0.56
Abstract · 27 pages: 5-page manuscript with 4 figures, followed by a 22-page supplementary results appendix. Submitted to ICASSP 2027

We predict single-sequence model throughput from GGUF metadata using roofline-shaped predictors with quantization-specific scale factors fitted on reference models. The scored cohort comprises 318 phase-depth measurements from 53 host-file configurations on two Apple M4 Max systems and an NVIDIA RTX 5080. On host-specific held-out sets of four, five, and two configurations, an active-parameter decode model obtains 13.1%, 14.4%, and 36.1% mean absolute percentage error (MAPE), versus 49.4%, 55.3%, and 51.9% when charging total parameters. Leave-one-host-out coefficients fitted on the other two systems yield 11.6%, 16.8%, and 36.0% test MAPE. A low-bit model ladder changes ordering across runtime stacks. The P2 prefill baseline gives 18.7%, 22.2%, and 108.2% test MAPE. GGUF structure helps on all three systems, but fitted efficiencies are not universal.

0.37