CS Paper Radar

Brain-inspired Beam Selection for mmWave RIS Communication

Aris Karampelas Timotijevic, Christos G. Tsinos, Alexandros-Apostolos A. Boulogeorgos, Theodoros A. Tsiftsis

eess.SP ·submitted 2026-11-13 02:19 UTC · v1

Abstract

Beam selection at large passive reconfigurable intelligent surfaces (RISs) requires either full channel knowledge or beam training, both of which entail unwanted overhead. On the other hand, learned models that predict the optimal codeword from channels sampled at a few active elements avoid both, at the cost of energy-demanding multiply-and-accumulate operations. In this paper, we propose spiking neural network (SNN)-based beam selection for a semi-active RIS assisting a mmWave multiple-input single-output communication system. Direct and sigmoid rate coding are compared against a multi- layer perceptron (MLP) of identical architecture. Energy analysis further reveals that the input layer dominates SNN energy consumption.

Comment
5 pages, 3 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Energy-Efficient Spiking Neural Networks for Sensing-Aided Beam Prediction

cs.NE cs.AI ·2026-10-06 ·Nhan Thanh Nguyen, Phuong Nam Tran, Mengyuan Ma, Huy T. Nguyen, Ahmed Alkhateeb +1 more
similarity 0.69
Abstract · Submitted for possible publication

Sensing-aided beam prediction can reduce the beam-training overhead of millimeter-wave (mmWave) systems by leveraging environmental information from complementary modalities such as vision and position. However, the resulting sensing and inference pipeline can be energy-intensive, motivating the use of energy-efficient spiking neural networks (SNNs) as an alternative to conventional artificial neural networks (ANNs). In this work, we develop SNN architectures for beam prediction and systematically compare them with ANNs using position-only, vision-only, and multimodal inputs. Our results show that compact ANNs consistently outperform SNNs for position-only sensing. In contrast, for vision and multimodal sensing, SNNs achieve higher accuracy than ANNs at similar energy costs and require up to an order of magnitude less energy at a comparable accuracy. For example, the multimodal SNN achieves 58.08% top-1 accuracy, outperforming the closest-energy ANN by 18.11 percentage points. We further show that SNN accuracy is limited by the binary communication between layers rather than by model size. These results demonstrate the potential of SNNs for energy-efficient sensing-aided beam prediction while highlighting their accuracy limitation.

0.12

Brain-Inspired User Positioning for mmWave Beam Management

eess.SP ·2026-09-05 ·Aris Karampelas Timotijevic, Evangelos Koutsonas, Vasileios Kouvakis, Stylianos E. Trevlakis, Alexandros-Apostolos A. Boulogeorgos +1 more
similarity 0.61
Abstract · 13 pages, 9 figures

Wireless positioning is a key enabling functionality of high-frequency, highly directional wireless systems. Supporting beam tracking depends on accurately translating channel state in- formation (CSI) estimations into position predictions. However, as urban propagation environments are inherently highly complex, determining the process that connects the CSI with the mobile user position is a difficult task. Motivated by this observation, a great amount of effort was put on designing user positioning schemes that employ conventional machine learning approaches, such as k-nearest neighbors (k-NN), and convolutional neural networks (CNNs). However, conventional models achieve low energy efficiency (EE). To counterbalance this disadvantage, brain-inspired neural processing units (NPUs) has recently been introduced. For their optimum operation, NPUs require the execution of a new type of neural models, namely spiking neural networks (SNNs). Inspired by this, in this paper, we present a wireless network architecture that enables CSI acquisition, translation into mobile user position information, and beamforming adaptation through novel convolutional SNN (CSNN) models. To train and assess the models' performance, we created datasets based on realistic ray-tracing-based simulations. We applied the CSNN architecture and compared its performance against fingerprinting k-NNs, and CNNs in terms of both computing- and communication-tailored performance metrics. The results highlight a trade-off between EE and user positioning accuracy.

0.25

Energy-efficient End-to-End Communication System with Spiking Neural Networks

cs.NI ·2026-11-03 ·Pooja Plavilayil Anil, Te-Chuan Chiu, Nguyen Van Huynh
similarity 0.60
Abstract · 6 pages, 5 figures, 1 table, conference

2030 is expected to witness the first commercial 6G systems. However, traditional modular communication architectures cannot meet the latency, optimisation, and integration requirements demanded by various sub-millisecond, data-intensive emerging 6G applications. End-to-end (E2E) communication addresses these limitations by replacing traditional processing blocks with neural networks. Nevertheless, conventional artificial neural networks (ANNs) in E2E systems use dense computation. This results in substantial energy consumption and computational resource requirements, which may not be feasible in resource constrained devices. This paper addresses the aforementioned challenge by developing a spiking neural network (SNN) encoder that targets lower encoder inference energy while maintaining communication reliability. In particular, the SNN encoder combines sparse spike activity, sinusoidal temporal modulation, and weighted temporal aggregation to map one-hot encoded messages to distinguishable transmit signals. The model is evaluated across antenna configurations and SNN timesteps to investigate the bit error rate (BER)-energy trade-off. The simulation results show that the SNN encoder achieves comparable BER under suitable timestep selections, while reducing the average estimated encoder energy by 68.93%, 52.20%, and 35.69% for SNN timesteps 2, 3, and 4, respectively, across five antenna configurations. These findings highlight the potential of the proposed SNN encoder for energy-efficient E2E communication systems.

0.15

Predictive Suppression Layers for Communication-Efficient Spiking Neural Networks

cs.NE cs.LGeess.SP ·2026-09-18 ·Aidin Attar, Michele Rossi
published similarity 0.59
Abstract · 6 pages, 5 figures. Accepted at the 1st Neuromorphic Physical Layer Signal Processing for Wireless Systems Workshop (NeuroPHY 2026), co-loca…

Feedforward Spiking Neural Networks (SNNs) typically propagate every generated spike indiscriminately, disregarding whether the information is redundant from an information-theoretic perspective. This lack of selectivity induces high redundancy in inter-layer communication, creating an expensive overhead, e.g., in scenarios involving many-core neuromorphic hardware or communication-dominated Internet-of-Things (IoT) where features are transmitted wirelessly. To address this challenge, we trade localized processing for leaner network channels by introducing a minimal predictive coding framework for SNNs. We propose two layer variants sharing a predictor block: error units, which transmit signed spiking residuals, and predictive suppression, which uses residual magnitude to dynamically gate and forward only unpredictable, "surprising" activity. Evaluated on the N-MNIST and Spiking Heidelberg Digits (SHD) datasets using diagnostic metrics that decouple local processing from cross-layer communication, our new predictive coding layers achieve significant communication savings. Numerical results reveal a three-fold reduction in communicated activity, while increasing the task accuracy for both datasets. The latter finding is notable, and suggests that predictive coding layers not only minimize communication overhead, but also produce output feature vectors with a higher representation power.

0.27

Deep Reinforcement Learning for Blind Passive Beamforming in RIS-Assisted MIMO Systems

cs.IT stat.ML ·2026-10-29 ·Oumaïma Bounhar, Thomas Chêne, Ghaya Rekaya-Ben Othman, Oussama Damen
published similarity 0.58
Abstract · Accepted at AIxNET 2026. 6 pages. Copyright may be transferred to IEEE after publication, after which this version may no longer be accessib…

Reconfigurable Intelligent Surfaces (RIS) are a promising solution for improving millimeter-wave (mmWave) communications by controlling signal propagation. Yet, selecting the optimal RIS configuration remains challenging due to the high-dimensional search space and signaling overhead. We propose a Deep Reinforcement Learning (DRL) framework for blind passive beamforming, where a Deep Q-Learning (DQL) agent learns an adaptive policy to select near-optimal RIS configurations while sounding only few codewords, without channel state information. Results show that our approach outperforms Q-Learning (QL) and conventional baselines in convergence, performance, and overhead reduction.

0.34

Spiking Neural Network-based Equalization and Demapping in IM/DD Systems: A Comparison

eess.SP ·2026-09-28 ·Eike-Manuel Edelmann, Alexander von Bank, Laurent Schmalen
published similarity 0.56
Abstract · Accepted for publication in Journal of Lightwave Technology

In recent years, artificial neural networks (ANNs) have emerged as the de facto standard for addressing challenging problems in communications engineering that are difficult to solve using traditional methods. However, the dense matrix multiplications employed in ANNs often result in high computational complexity and, consequently, power-hungry systems. To overcome these limitations, researchers are turning to alternative computational models, such as spiking neural networks (SNNs), which promise highly energy-efficient computation. Recent works have shown that SNN-based equalizers and demappers achieve promising results in non-coherent short-reach optical communication systems affected by chromatic dispersion and nonlinear distortion. However, the proposed approaches differ in several design choices, such as the incorporation of decision feedback, the use of recurrent connections inside the SNN, different neural encodings, and regularization techniques. A systematic comparison of the various design choices has not yet been reported in the literature. This article presents a systematic comparison of design choices for SNN-based equalizers and demappers in intensity modulation with direct detection systems, evaluating their impact on bit error rate, spike activity, and model size. The results reveal that design and encoding choices affect these metrics differently, leading to inherent trade-offs.

0.47

Spiking Neural Beamforming for Multichannel Speech Enhancement on the Edge

eess.AS ·2026-10-12 ·Hanan Beit-On, Eli Shapira, Boaz Rafaely
similarity 0.56
Abstract

Speech enhancement with wearable and edge devices requires architectures that balance enhancement quality against power and memory resources. Spiking Neural Networks (SNNs) offer a promising path towards this goal through sparse, event-driven computation, but existing SNN-based speech enhancement methods are largely restricted to single-channel processing and therefore cannot exploit the spatial diversity available from microphone arrays. In this work, we propose a fully SNN framework for multichannel speech enhancement based on a fully connected architecture (FC-SNN) with sequential spike encoding, derived from a compact artificial neural network (ANN) baseline via leaky integrate-and-fire neurons. We characterize how enhancement performance scales with model size and spike-train length relative to ANN and classical beamforming baselines, and report the resulting parameter counts and computational complexity. We further compare direct and rate spike encoding, revealing a clear trade-off between event-driven computation and enhancement performance, and use these results to identify favorable configurations for edge devices.

0.20

Learning-Assisted Beamforming Optimization for Hybrid XL-RIS-Aided Communication

cs.IT ·2026-11-07 ·Awuni Mohammed Abdul-Razak, Kyungchun Lee
similarity 0.55
Abstract · 13 pages, 8 figures

Hybrid active-passive extremely large-scale reconfigurable intelligent surface (XL-RIS) architectures mitigate the double-hop path loss of passive RIS while enabling near-field spatial energy focusing, but impose a computationally intensive mixed discrete-continuous beamforming design problem under strict radio-frequency (RF) power constraints. This paper investigates a hybrid XL-RIS-assisted downlink multi-user multiple-input single-output (MU-MISO) system in the near-field regime. The joint optimization of the base station (BS) precoder, discrete XL-RIS phase shifts, and active-element amplification gains is addressed via a discrete coordinate ascent (DCA)-based alternating optimization (AO) framework, in which discrete variables are updated through local index-domain searches and the BS precoder is derived in closed form via a noise-aware minimum mean-square error (MMSE) criterion. To reduce the per-sample computational cost for XL-RIS apertures, a deep unfolding (DU) framework is proposed as a low-complexity alternative, unrolling a fixed number of Riemannian gradient ascent steps on the sum-rate objective and recovering the discrete phase configuration via quantized phasor projection, with one learnable step size per layer trained in a self-supervised manner. Numerical results under near-field spherical-wave channel models confirm that the DU framework achieves sum-rate performance close to the AO scheme with substantially lower and nearly constant runtime, and that both schemes consistently outperform manifold optimization under discrete hardware constraints.

0.19