CS Paper Radar

A Reinforcement Learning Approach to Space-Filling Input Design for Nonlinear System Identification

Charly Witmeur, Gonçalo G. Cruz, Maarten Schoukens, Mark C. Runacres, Jan Decuyper

eess.SY ·submitted 2026-11-13 14:28 UTC · v1
benchmark

Abstract

In this paper, we propose a reinforcement learning (RL) approach to space-filling input design for nonlinear system identification, in which an agent learns a control policy that actively drives the system to explore its state space. Classical input design, developed mainly for linear models, minimises the covariance of the estimated parameters. For nonlinear black-box models, however, the dominant error is the bias induced by the model structure over the region of interest, which motivates space-filling strategies that seek to cover the system state space. Existing space-filling approaches rely on predefined input signal classes and require solving explicit optimisation problems. Unlike these methods, the proposed approach requires no input class to be selected and no frequency band to be tuned for the system at hand, satisfies an amplitude bound by construction, and adapts to varying initial conditions through its observation-based policy without re-optimisation. The learned excitation signals exhibit physically meaningful behaviours, such as resonance excitation and amplitude modulation. The approach is evaluated against tuned swept sine and crest-factor-optimised multisine excitations, and against a state-of-the-art space-filling multisine design, on two nonlinear benchmark systems: a mass-spring-damper with nonlinear stiffness and a Van der Pol oscillator. Under the same amplitude bound, the learned policy achieves the best overall space-filling performance on both systems and distributes its samples more uniformly than the state-of-the-art design.

Closest papers

Nearest neighbours by meaning across the whole index.

Turnpike properties in nonlinear system identification

eess.SY math.OC ·2026-09-02 ·Julian D. Schiller, Matthias A. Müller
similarity 0.64
Abstract

We analyze the problem of learning general discrete-time nonlinear state-space models using the simulation error minimization (SEM) method. In this setting, model parameters are typically learned by minimizing the mismatch between simulated and measured outputs over a training dataset, or shorter subsequences extracted from it. Specifically, we study the cumulative output turnpike property of the underlying SEM optimization problem, which requires optimal output sequences emanating from a fixed initial state to approach and remain close to an optimal output sequence of the corresponding SEM problem with free initial state. In the presence of non-unique optimal output sequences---as may arise, for instance, in fully black-box system identification using neural networks---the property is formulated with respect to the closest such sequence. Turnpike behavior is generally desirable in practice, as it provides a theoretical justification for employing computationally more tractable SEM formulations with fixed initial states while ensuring that their optimal output sequences remain close to unconstrained optimal ones. Under a mild reachability condition, we establish equivalence between the cumulative turnpike property, coercivity of the value function, and a tailored notion of strict dissipativity. We additionally introduce a cardinality turnpike property and show that it is strictly weaker than the cumulative notion. Finally, we establish sufficient conditions for turnpike behavior based on incremental output stability, convexity of the stage cost, and a suitable optimality condition, and illustrate the theory by means of a numerical example.

0.38

Transfer Meta-Learning for State Space Autoencoders

eess.SY ·2026-10-22 ·Stefano De Carli, Daniele Masti, Davide Previtali, Mirko Mazzoleni
similarity 0.59
Abstract · 8 pages, 4 figures. Submitted to IFAC for possible publication

Nonlinear system identification often requires costly experimental campaigns and separate model fitting for each different instance (target system) of a given system family. To reduce this burden, meta-learning approaches reuse information acquired across related systems. In particular, in-context meta-learning enables zero-shot prediction from a brief target system context (i.e., a short input-output trajectory), but generally yields large black-box sequence predictors without exposing an explicit state space model. Conversely, compact structured state space models are suitable for simulation, estimation, and control, but are usually fitted or adapted separately for each target system. To bridge this gap, we introduce a transfer meta-learning extension of state space autoencoders. The method reuses a pretrained encoder, whose weights remain fixed, to extract a compact representation of the target system from its context. An affine parameterization maps this representation to the parameters of a compact neural state space model without target-specific adaptation; the resulting model contains orders of magnitude fewer parameters than the reference in-context predictors from the literature. We evaluate zero-shot prediction and simulation performance on held-out system instances from Buck-Boost converter and Bouc-Wen oscillator system families, comparing performance against individually fitted baseline models.

0.12

Learning Transferable Policies from Action-free Time Series Through Dynamical Embeddings

cs.LG ·2026-10-02 ·Niklas Emonds, Georgia Koppe
similarity 0.58
Abstract

Learning control from action-free recordings is challenging because intervention effects are unobserved and policies may exploit errors in reconstructed dynamics. We present a hierarchical model-based reinforcement learning framework that uses shared structure across related systems to learn system-specific control policies from action-free recordings. A hierarchical dynamical system reconstruction model captures shared dynamics and individual variation through low-dimensional embeddings. These embeddings are then reused to parameterize shared policy and value networks, linking differences in reconstructed dynamics to differences in control. Policies are trained entirely via simulation under an explicit intervention model with additive latent perturbations. Piecewise-linear recurrent neural networks enable mechanistic analyses of the controlled dynamics, while decoder-based constraints make the immediate effects of interventions interpretable in observation space and permit interventions on one modality while protecting another from direct manipulation. On Lorenz-63 and double-pendulum systems, hierarchical policies improve transfer over independently trained policies. On Lorenz-63, they also achieve a higher mean reward than repeated planning with the same reconstructed models, perform comparably to methods trained with controlled interactions, and generalize to systems absent from policy training after embedding inference alone. Applications to neural-behavioral recordings demonstrate suppression of predicted movement under constrained neural perturbations. Together, these findings show how shared dynamical representations support transferable control and mechanistic hypothesis generation from action-free recordings.

0.25

Predefined-Time Integral Reinforcement Learning for Unknown Nonlinear Systems via Inverse-Optimal Design

eess.SY ·2026-10-08 ·Tien Dat Vu
similarity 0.58
Abstract

This paper develops a new predefined-time integral reinforcement learning framework for optimal control of unknown nonlinear systems. The unknown drift is first approximated by a radial basis function (RBF) neural network, together with a data-driven online identification law for updating the corresponding neural weights. After the identifier converges to a sufficiently small neighborhood of the true dynamics, the learned model is incorporated into the integral reinforcement learning (IRL) problem. Unlike conventional reinforcement-learning-based optimal control, the desired convergence time is introduced directly into the control objective: a Lyapunov function and its prescribed decay behavior are specified by the designer, and inverse-optimal control is then used to construct a compatible running cost whose optimal policy inherits the predefined-time stabilization property. The value function is approximated by a second RBF neural network, and a new critic update law is developed to impose predefined-time convergence on the critic weights. Finite informative learning data are stored in a replay buffer and reused during the critic update, thereby avoiding the need for persistent excitation throughout the closed-loop operation. Theoretical analysis proves that the critic-weight error enters a prescribed residual set within the allocated learning horizon, while the closed-loop state reaches a small neighborhood of the origin within the overall designer-specified deadline. Numerical simulations on an unknown nonlinear system verify accurate drift reconstruction, predefined-time critic learning, and closed-loop convergence.

0.37

Reinforcement learning for control of partial differential equations

cs.LG ·2026-10-29 ·Nicolò Botteghi, Matteo Tomasetto, Andrea Manzoni
similarity 0.57
Abstract

Controlling dynamical systems governed by partial differential equations (PDEs) remains a challenging task in scientific computing, owing to high-dimensional state spaces, distributed actuation, nonlinear dynamics, and stringent real-time constraints. Reinforcement learning (RL) has emerged as a promising paradigm for synthesizing feedback controllers that adapt to varying operating conditions and can be deployed efficiently in real-time. This review provides a unified perspective on RL and PDE-constrained optimization, and surveys model-free, model-based, and multi-agent RL approaches to PDE control, with particular emphasis on sample efficiency, generalization across parametric variations, and scalability to high-dimensional problems. Two demonstrative examples, the stabilization of a chaotic system and a flow control problem, illustrate the performance and pitfalls of RL agents in practice. Finally, we discuss evaluation and benchmarking practices, current limitations, and open research directions toward reliable, data-efficient, and scalable RL for scientific computing.

0.17

Robust Space-Filling Input Design via Stochastic Optimization

eess.SY ·2026-08-13 ·Máté Kiss, Roland Tóth, Maarten Schoukens
similarity 0.57
Abstract

The space-filling input design approach generates a so-called space-filling dataset in the feature space of the system model. The design method is applicable on a broad class of model structures with wide selection of signals and also incorporates information measures through optimality criteria into the signal design. However, during the signal design, knowledge of a hypothesized model is required. The designed signal can perform far from the optimal if the true system is significantly different from the hypothesized system model. This paper proposes a robust space-filling input design algorithm that can generate a space-filling dataset for an entire class of models. The proposed algorithm takes the expectation of an optimality criterion over the population of the model class, and a stochastic approximation technique is employed to optimize this robust criteria. The efficiency of the proposed algorithm is demonstrated in a simulation example.

0.04

Data-Driven Hamiltonian for Neural Optimal Control

eess.SY ·2026-10-26 ·Christopher A. Strong, Aswin Surya, Namhoon Cho, Jason J. Choi, Claire J. Tomlin
benchmark similarity 0.56
Abstract · 21 pages, 9 figures

Reinforcement learning (RL) has emerged as a prominent data-driven approach to optimal control, but often requires substantial amounts of data and provides limited guarantees when encountering out-of-distribution state-action pairs. In this paper, we propose an alternative approach grounded in the well-established Hamilton-Jacobi framework in optimal control theory. Rather than requiring an explicit analytical model of the system dynamics to evaluate the Hamiltonian, we replace this with a data-driven Hamiltonian (DDH), which we generalize to a broad class of optimal control problems. In contrast to standard RL approaches, the DDH provides a principled mechanism, requiring only minimal prior system information such as a Lipschitz constant, for quantifying and accounting for uncertainty in regions not covered by the data, enabling the derivation of controllers with performance guarantees. Additional prior system knowledge, when available, can be readily incorporated to improve performance. For high-dimensional systems, we further introduce a physics-informed neural approximation of the value function, trained using a novel procedure that generates worst-case fictitious rollouts evaluated through the DDH. On an LQR problem, the DDH reaches near-optimal cost on every dataset we test, including random data on which offline RL methods remain far from optimal, and needs far fewer samples than online RL. On a nonlinear lunar lander benchmark, the DDH achieves an optimality gap to a trajectory-optimization reference more than $3\times$ smaller than CQL and FQL, and matches the performance of SAC with approximately $37\times$ fewer samples. These results establish the DDH as a promising framework for data-driven optimal control, particularly in settings where available data are limited in quantity or quality.

0.33

Reinforcement Learning-Based Output Feedback LQR for Continuous-Time MIMO Systems

eess.SY ·2026-08-12 ·Qihua Chen, Mingxiang Liu, Lili Wang, Zhiyun Lin, Minyue Fu
similarity 0.55
Abstract · 22 pages, 3 figures, 1 table

This article studies model-free output feedback linear quadratic regulation (LQR) for continuous-time linear systems with an $n$-dimensional state, an $m$-dimensional input, and a $p$-dimensional output, using filtered input--output data. Since the system state is unavailable, existing methods rely on dynamic filters to parameterize the hidden state using measurable input--output signals. However, the intrinsic dimension of the resulting filter-based parametrization can be smaller than the dimension of the complete filtered vector, and this deterministic redundancy can make the Bellman regressions rank deficient. We characterize this intrinsic dimension and show that the conventional filtered vector contains only $2n$ independent components for single-input multi-output (SIMO) systems and $n(m+1)$ independent components for general multi-input multi-output (MIMO) systems. Based on this characterization, a reduced filtered vector is extracted directly from data and used to develop reduced model-free output feedback policy iteration and value iteration equations, eliminating the redundant directions and decreasing the number of unknown parameters while retaining a fully input--output data-based implementation. A numerical example illustrates the rank reduction and the effectiveness of the learned controller.

0.10