CS Paper Radar

D2ToF: One-Step Diffusion for Depth Super-Resolution from Lightweight Single-Photon LiDAR Waveforms

Pallabjyoti Deka, Lewis Wilson, Stephen McLaughlin, Jonathan Leach, Abderrahim Halimi

eess.IV cs.CV ·submitted 2026-11-13 14:39 UTC · v1

Abstract

Single-photon LiDAR (SPL) sensors offer exceptional temporal resolution and single-photon sensitivity for depth imaging. However, cost-effective SPL arrays typically suffer from extremely low spatial resolutions (e.g. $8\times 8$ pixels), limiting their real-world utility. In this paper, we propose a novel, one-step super-resolution framework, D2ToF, Distilled Diffusion for Time-of-Flight, that bridges the gap between high-fidelity generative modeling and real-time execution. Our approach uses an amortized variational distillation strategy that allows for a measurement-based data consistency term to be incorporated directly into the one-step training objective. This encourages that the synthesized high-resolution depth maps are consistent with the captured low-resolution Time-of-Flight (ToF) histograms. To overcome the severe ill-posedness of upsampling extremely degraded inputs, we introduce a multimodal guidance strategy. By leveraging a foundational monocular depth model to extract structural priors from a high-resolution reflectivity image, our network is guided by a rich triad of the ToF histogram, reflectivity map, and relative depth estimate. Experimental results outperform evaluated baselines, achieving $16\times$ spatial super-resolution (from $8\times 8 \times 100$ histograms to $128\times 128$ depth maps) at an accelerated inference speed of approximately $83$ milliseconds.

Closest papers

Nearest neighbours by meaning across the whole index.

eSharp: Diffusion-based Sharp Monocular Metric Event-to-Depth Estimation

cs.CV eess.IV ·2026-11-05 ·Qiushi Dai, Aniket Dashpute, Yuhao Liu, Rishubh Parihar, Guha Balakrishnan +1 more
similarity 0.72
Abstract

Depth perception is fundamental for autonomous navigation, industrial inspection, and mixed-reality systems. It often operates under strict constraints on power and form factor. In such cases, monocular depth estimation (MDE) is often used. Even as recent advances continue to improve monocular depth quality, conventional frame-based MDE systems remain challenged by fast motion and high-dynamic-range scenes. This work introduces eSharp, an MDE framework that addresses these problems using an event camera. eSharp repurposes pretrained diffusion priors for event-only MDE and produces accurate metric depth with unparalleled sharpness on real data. Real-world event datasets provide only sparse LiDAR depth maps for ground-truth supervision, making dense prediction challenging. We address this limitation through cross-modal distillation, using LiDAR-calibrated dense pseudo-labels generated from a spatially co-registered frame camera to train eSharp. Experiments show that eSharp outperforms prior event-to-depth baselines in both metric-depth accuracy and spatial fidelity, establishing diffusion models as a promising foundation for event-driven 3D perception.

0.20

Harnessing SPAD Noise: Test-Time Gated Attention for Indoor Depth Estimation

cs.CV cs.LGcs.ROeess.SP ·2026-10-11 ·Yiquan Gao
code/data similarity 0.68
Abstract

Monocular depth estimation (MDE) has emerged as a cost-effective alternative to hardware-dependent 3D sensing modalities, yet predicting precise metric depth remains a persistent challenge due to intrinsic scale ambiguity, edge bleeding, and limited zero-shot generalization in unseen environments. Recent multi-modal approaches incorporate 1D/3D Single-Photon Avalanche Diode (SPAD) data to resolve these ambiguities, but they mainly treat SPAD noise as a harmful artifact required for denoising or leave the noise ignored. In this paper, we present an essentially different insight: native SPAD noise is an informative prior that implicitly encodes deterministic environmental characteristics. Driven by this paradigm shift, we introduce a novel, lightweight Test-Time Gated Attention framework by Harnessing SPAD Noise, therefore dubbed HSN. Tailored for indoor scenarios, HSN leverages the synergistic combination of 1D SPAD histograms and Gate Adapters (GAs). Through three complementary optimization phases, it generates channel-wise gated attention vectors to dynamically adjust encoder feature maps at inference time, effectively resolving ambiguous scale and boundary challenges without the heavy computational overhead or dense 3D modalities that other TTA methods suffer from. Extensive experiments on challenging real-world indoor benchmarks show that HSN achieves state-of-the-art metric depth accuracy in in-domain settings, while exhibiting even greater potential under zero-shot generalization to unfamiliar environments. Furthermore, interpretability analysis reveals that the proposed gated attention mechanism adaptively shifts attention toward deeper semantic layers under intensifying SPAD noise. Code will be made publicly available.

0.25

Extrapolation Matters: Sparse-Only Depth Completion Beyond LiDAR Coverage

cs.CV ·2026-11-05 ·Maximilian Jansen, Gasser Elazab, Praveen Kulkarni
hot direction similarity 0.67
Abstract

Extrapolation beyond LiDAR coverage is an important yet under-evaluated challenge of depth completion. In real camera--LiDAR systems, partial sensor overlap, occlusions, and limited field coverage often leave large image regions weakly observed or completely unobserved by LiDAR. Thus, we investigate depth completion in this beyond-coverage regime using only sparse supervision from raw single-sweep LiDAR, without dense depth labels, LiDAR accumulation, or pseudo-LiDAR generation. Our approach leverages a frozen monocular depth foundation model, lightweight per-frame alignment to sparse LiDAR geometry, and a refinement module that fuses the aligned prior with sparse LiDAR anchors to predict dense metric depth. To regularize learning under raw sparse supervision, we introduce a high-frequency normal-consistency loss defined as the image-space gradient of the per-pixel normal cosine discrepancy. This term penalizes spatial variation in scalar angular error; it does not directly match changes in neighboring normal vectors. We further introduce an evaluation protocol that explicitly separates LiDAR-supported and beyond-coverage regions, revealing extrapolative behavior that conventional depth-completion metrics can obscure. Our method achieves strong depth accuracy beyond LiDAR coverage while remaining competitive in LiDAR-covered regions, providing a practical way to deploy monocular foundation priors in multi-sensor systems.

0.18

CrossLiDAR: Controllable Multi-Sensor LiDAR Sequence Generation

cs.CV cs.AIcs.RO ·2026-11-08 ·Khanh Nguyen, Thomas Walker, Hichem Telli, Carlos de la Torre-Ortiz, Stefano Fiorini +4 more
published similarity 0.67
Abstract · WACV 2027

High-fidelity LiDAR simulation remains a bottleneck for scalable development and validation of autonomous systems. Existing generators can synthesize realistic scans, but they are typically constrained to a single sensor configuration, offer limited control over structure and geometry, and drift in long-horizon 4D generation. We present CrossLiDAR, a unified transformer-based framework capable of generating controllable and spatio-temporally consistent multi-sensor LiDAR sequences. Our approach leverages a rectified flow objective with a Multi-Modal Diffusion Transformer (MM-DiT) backbone, within a compact latent space of range images. To support multiple LiDAR sensors, an Inter-sensor Module enables interaction across sensors, while a ControlNet-style branch provides structural conditioning (e.g., BEV priors or 3D bounding boxes). For modeling the temporal consistency, CrossLiDAR generates short $N$-frame sequences and extends them autoregressively to improve long-horizon coherence. Our model significantly outperforms state-of-the-art baselines, achieving an average improvement of 29.56\% in JSD and 15.36\% in MMD evaluated on nuScenes and the Waymo Dataset. CrossLiDAR bridges the gap to modern autonomous-driving simulation by enabling calibration-consistent multi-sensor LiDAR rollouts over long horizons for controllable, scenario-based testing.

0.31

On-Device Super-Resolution Imaging for a Low-Cost SPAD Array on a 640-KB-SRAM Microcontroller

eess.IV ·2026-10-06 ·Zhenya Zang, Istvan Gyongy, Mike Davies
similarity 0.66
Abstract

This work presents a super-resolution (SR) deep-learning (DL) architecture to simultaneously upscale low-resolution (LR) depth and intensity images acquired by a consumer-grade VL53L9CX time-of-flight (ToF) sensor, a compact single-photon avalanche diode (SPAD) ranging device, while targeting deployment on a resource-constrained microcontroller (MCU) with only 640 KB SRAM and 2 MB Flash. The VL53L9CX provides 54 $\times$ 42 depth and intensity measurements. The proposed framework performs $\times$4 spatial SR to reconstruct 216 $\times$ 168 depth and intensity images simultaneously. The network employs separate reconstruction branches for intensity and high-resolution (HR) depth. We train the network with efficient loss functions and investigate the performance by testing multiple compact, hardware-oriented backbones, including Spatially Adaptive Feature Modulation (SAFM), Swift Parameter-Free Attention Network (SPAN), and Residual Local Feature Network (RLFN). We evaluate the network on both synthetic and real measurements, with particular attention to constrained activation and memory storage. We export the selected network to ONNX, quantize it to INT8, generate C inference code for an STM32H563ZI Arm Cortex-M33 MCU, and integrate it with our simplified sensor's firmware. This work is the first to demonstrate a compact DL SR model on a low-cost bare-metal MCU for a consumer-grade LR SPAD sensor, integrated with customized MCU firmware to enable on-device SR inference.

0.22

LiDAR Resolution Recovery via Foundation-Model-Guided Diffusion

cs.CV ·2026-10-06 ·Samed Doğan, Nico Leuze, Alfred Schöttl
similarity 0.66
Abstract

High-beam-count LiDAR sensors are costly, yet many perception pipelines require dense angular sampling. Using a pretrained Stable Diffusion model as the backbone, we fine-tune a LiDAR-conditioned depth model with pseudo-depth targets from a 2D foundation model. During training, the LiDAR conditioning is randomly decimated at different beam budgets. We then investigate how much of a LiDAR scan can be recovered from heavily decimated input and characterize performance across the input beam budget. We evaluate against physically held-out real beams on nuScenes and report recovery separately from fit accuracy. Our model yields its largest advantage in very sparse regimes, achieving a $δ_{1.25}$ accuracy of $66.8$% from $4$-beam input where scattered interpolation reaches only $45.1$%. A class-stratified error breakdown further reveals that planar surfaces recover first while objects introducing depth discontinuities degrade earliest. Together, these results quantify the recovery/resolution trade-off for foundation-model-guided LiDAR enhancement.

0.20

LIFT: Local Metric Alignment and Foundation-guided Propagation for Few-shot Depth Completion

cs.CV ·2026-11-07 ·Xiang Li, Xiaojin Gong
code/data similarity 0.65
Abstract · 8 pages, 5 figures

Few-shot depth completion aims to recover dense metric depth from sparse measurements using only a small number of target-domain annotations, offering a favorable balance between annotation cost and model adaptation. We propose LIFT, a framework that harnesses both depth and feature priors from a frozen pretrained monocular depth estimation (MDE) foundation model for few-shot depth completion. Specifically, LIFT first estimates local scale and shift parameters on a coarse grid and interpolates them into smooth, dense parameter fields, providing a spatially adaptive metric depth initialization. It then progressively refines this initialization through multi-scale depth propagation guided by foundation features. Finally, a lightweight residual decoder combines multi-level foundation features with propagation correction to refine the metric depth. Extensive experiments on NYUv2 and KITTI-DC demonstrate that our proposed method achieves state-of-the-art few-shot performance. The source code will soon be released.

0.31

Reliable iToF Depth Sensing via Sensor-Intrinsic Uncertainty Modeling and State-Space Restoration

cs.CV physics.optics ·2026-08-29 ·Yansong Du, Yutong Deng, Yuting Zhou, Zhancong Xu, Yingjia Lu +5 more
similarity 0.64
Abstract · 11 pages, 7 figures

Indirect time-of-flight (iToF) cameras provide compact and cost-effective dense depth measurements, but their ranging accuracy is often degraded by sensor-intrinsic uncertainty under practical imaging conditions. Spatially uniform or range-only Gaussian perturbations cannot accurately reproduce the range-dependent and signal-dependent noise characteristics of real iToF measurements, leading to a synthetic-to-real gap for learning-based restoration. To address this problem, we propose a joint depth-uncertainty modeling and restoration framework for reliable iToF sensing. A sensor-intrinsic depth-uncertainty model is first developed from calibrated tap responses, returned-signal levels, and sensor noise statistics through a depth-oriented weighted least-squares formulation. The resulting pixel-wise uncertainty is used for heteroscedastic depth synthesis and uncertainty-aware restoration supervision. Based on this heteroscedastic data synthesis, we further develop a U-shaped restoration network with Depth Visual State Space (DVSS) blocks, which combine long-range state-space modeling with convolutional spatial-channel refinement for structure-preserving depth recovery. Experiments on synthetic data and measurements captured by an in-house iToF prototype validate the proposed uncertainty model under varying range and returned-signal conditions. Controlled comparisons with fixed and range-aware Gaussian noise, together with evaluations on U-Net, Restormer, and DVSS, further demonstrate that the proposed synthesis consistently benefits different restoration backbones. The complete framework achieves 40.85~dB PSNR and 2.54 mm MAE on the synthetic test set, and 35.42 dB PSNR and 4.87 mm MAE on real iToF measurements.

0.33