CS Paper Radar

Target-Free Autocalibration of Stereo PIV Camera Systems via Persistent-State Motion Representations

Nabil Madali

cs.CV cs.AI ·submitted 2026-11-11 06:37 UTC · v1

Abstract

Stereo Particle Image Velocimetry (PIV) recovers three-component velocity fields by triangulating tracer particles observed by synchronized cameras. It requires an accurate extrinsic calibration, which is still obtained by inserting a physical target into the flow and must be repeated whenever the rig is moved. We present a target-free method that calibrates a stereo PIV rig directly from particle image sequences. Because tracer particles are visually indistinguishable, we match motion rather than appearance: building on CUT3R, each camera stream is processed by a recurrent transformer whose persistent state accumulates particle motion over time. The state is decoded into per-camera optical flow and queried by a cross-view decoder that regresses bidirectional point correspondences, from which the relative pose is recovered with a five-point RANSAC solver. We train on a new synthetic stereo PIV dataset with ground-truth poses and evaluate on standard PIV optical flow benchmarks and on 200 real rig placements. Our model achieves lower flow error than existing PIV networks, more accurate cross-view correspondences than COTR, and higher pose accuracy than the strongest detector-matcher pipelines on both synthetic and real data, without any calibration target.

Closest papers

Nearest neighbours by meaning across the whole index.

TAPVid-MV: A Benchmark for Tracking Any Point in 3D Across Multiple Views

cs.CV ·2026-09-01 ·Skanda Koppula, Frano Rajic, Abdullah Faiz Ur Rahman, Yi Yang, Ignacio Rocco +7 more
benchmarkcode/data similarity 0.67
Abstract

Multi-camera systems are increasingly practical for robotics, AR/VR, and autonomous driving because complementary views reduce depth ambiguity and preserve visibility under occlusion. Existing point-tracking benchmarks, however, focus on a single video or static multi-camera rigs. None test long-term 3D point tracking across several synchronized views under camera motion. We introduce TAPVid-MV (Tracking Any Point in Video across Multiple Views), the first benchmark for this setting. It contains a curated set of 238 sequences, 1,004 calibrated camera streams, and 74,147 point tracks across seven subsets spanning indoor and outdoor domains, from robotics and human activity to driving and synthetic procedural scenes. We obtain these trajectories using dataset-specific auxiliary modalities: sensor depth, LiDAR, SLAM and SfM points, human meshes, posed object meshes, and simulation. Every sequence and trajectory is visually verified by human annotators. Across more than 30 baselines, no method comes close to solving the task. Surprisingly, existing multi-view point trackers do not consistently outperform monocular point trackers. By evaluating reconstruction and point tracking on the same datasets, TAPVid-MV helps distinguish errors in recovered geometry from errors in point correspondence. Through this joint analysis, we identify geometry recovery as a major bottleneck for accurate 3D point tracking. Beyond multi-view 3D point tracking, our released annotations support monocular 2D and 3D point tracking, future-trajectory prediction, and 4D reconstruction. Project page: https://tapvidmv.github.io/

0.46

ART of PIV: Agentic Real-Time Particle Image Velocimetry for Active Flow Control

cs.AI physics.flu-dyncs.CV ·2026-10-30 ·Antonio Terpin, Francesco Banelli, Alan Bonomi, Raffaello D'Andrea
similarity 0.65
Abstract

Particle image velocimetry (PIV) measures fluid motion from images of tracer particles, but its accuracy depends on choices throughout the estimation pipeline, including image preprocessing, flow estimation, and postprocessing. These choices are typically left to expert tuning, and a fixed configuration can become less accurate as conditions change. This matters especially when PIV supplies feedback for real-time control, where measurements must be both accurate and fast, and flow conditions vary. We introduce ART of PIV -- short for Agentic Real-Time and also a nod to the art of tuning a PIV pipeline -- which automates pipeline choice for each image pair. A learned agent selects a configuration according to a chosen measurement objective from a library assembled for a specified speed budget. Across cross-correlation, classical optical-flow, and learning-based estimators, ART of PIV reduces average end-point error (AEPE) by 12.2-22.4 % relative to the best single estimator at matched speed, with gains extending to 1000-4000 image pair/s. In a simulated local velocity regulation task, it reduces mean normalized closed-loop cost by 13.24-13.59 percentage points relative to a tuned fixed estimator, with the same classical controller in both cases. In a tabletop water channel, we illustrate two ways to tune ART of PIV for a fluidic pinball of three rotating cylinders: selecting between complementary optical-flow tunings for accuracy, and selecting regions of interest with coherent rotation or shear using a common flow estimator. For the first variant, we train a DreamerV3 reinforcement learning controller directly in the physical world and demonstrate tracking of a prescribed flow field in the wake of a fluidic pinball.

0.34

Revisiting Multi-View Stereo: A Sequence-to-Sequence Formulation

cs.CV ·2026-09-21 ·Aoxiang Fan, Corentin Dumery, Nicolas Talabot, Pascal Fua
top venue similarity 0.64
Abstract · Accepted to NeurIPS 2026

Computing accurate geometry from multi-view images is a fundamental problem in computer vision. Recent feed-forward (FF) models jointly estimate 3D geometry and camera parameters, but they typically suffer from geometry distortion caused by reconstruction ambiguity, even when ground-truth camera parameters are supplied. In this paper, we study the multi-view stereo (MVS) problem with known camera parameters and propose a novel approach that bridges conventional MVS and FF methods. Rather than casting MVS as a sequence-to-one mapping that predicts depth only for a single reference view, we reformulate it as a sequence-to-sequence task, akin to FF models, that jointly predicts geometry for all input views. We introduce a global transformer-based architecture with two components that explicitly exploit camera-induced priors: ray-map embeddings that inject camera parameters into image patch tokens, making the transformer camera-aware, and a unified global cost volume that replaces conventional per-view cost volumes to jointly capture 3D structure across all views. Extensive experiments on multiple public benchmarks show our approach achieves state-of-the-art performance, surpassing both MVS and FF reconstruction baselines.

0.32

3D Point Tracking with State Space Models

cs.CV cs.LGcs.RO ·2026-09-27 ·Masahiro Ogawa, Qi An, Atsushi Yamashita
benchmark similarity 0.64
Abstract · 20 pages, 11 figures, 9 tables. Submitted to Computer Vision and Image Understanding

Tracking any point of a dynamic scene in metric 3D - in absolute meters, not up to an unknown scale - underpins 3D and 4D reconstruction, robot navigation, and autonomous driving, where decisions are made in meters, not pixels. Our objective is a 3D point tracker accurate in those absolute terms and operating within a single commodity GPU, pose-free, monocular budget. Our method rests on one observation: once a point's 2D image trajectory is fixed, the quantity that governs its metric accuracy is the depth along its pixel ray. Rather than learning tracking end-to-end, we therefore compose two frozen front-ends - dense optical flow for 2D correspondence and a monocular metric-depth network for the third dimension - and learn only the residual they cannot supply: that depth, refined by a compact state space model (Mamba-3) conditioned on appearance features (DINOv3). A state space model rather than the transformers the strongest 3D trackers adopt is what makes a single-GPU budget attainable: it summarises a track in a fixed-size recurrent state whose memory cost is constant in the number of frames, whereas attention requires a key-value cache that grows linearly with them. On the TAPVid-3D minival benchmark our best configuration attains the highest absolute metric accuracy among methods evaluated under identical conditions (mean metric Average Jaccard, 0.256), exceeding strong feed-forward trackers, while a companion analysis, reproduced with each competitor's own evaluator, explains why several published trackers lose most of their accuracy under this budget.

0.27

FlyingDrones: A Dataset and Benchmark for Optical Flow Estimation from UAV motion

cs.CV ·2026-11-05 ·Laurenz Ruzicka, Roman Pflugfelder, Daniel Cremers
publishedbenchmark similarity 0.64
Abstract · NeurIPS 2026, https://neurips.cc/virtual/2026/loc/sydney/poster/138996

Optical flow is an important cue for drone analysis in aerial surveillance, airspace monitoring, and long-range target tracking, where motion remains informative when appearance is weak. Estimating the motion of small Unmanned Aerial Vehicles, however, is difficult because distant targets occupy few pixels, have low contrast, and move against complex dynamic backgrounds. Standard optical-flow benchmarks emphasize large, object-centric motions and therefore do not characterize distant aerial targets well. We introduce FlyingDrones, a generated benchmark with dense ground-truth optical flow and segmentation masks derived from physically based rendering, and define resolution-normalized metrics (EPE Norm) that normalize flow by image dimensions. We evaluate 16 state-of-the-art model families on a motion- and size-stratified subset of 999 flow pairs at three resolutions. Every family recovers drone motion better than the zero-flow reference, but the gap between families widens with resolution: at 1920x1080, global-matching, recurrent, transformer, and short-window temporal models separate clearly from pyramid, classical, self-supervised, lightweight, and diffusion models. Within-family checkpoint spread is comparable to or larger than between-family spread, so the training curriculum is as important as the architecture. Two complementary studies test the benchmark beyond synthetic accuracy: a ground-truth-free motion-alignment evaluation on 21 cameras of real UAV footage shows that the synthetic ranking carries a moderate, significant signal about real-world performance (Spearman \r{ho} = 0.63 over 41 checkpoints) while the exact top ranks differ, and a fine-tuning study shows that 800 FlyingDrones pairs reduce held-out drone-region error by up to 37% and improve drone localization on the real footage for all four architectures tested.

0.30

PIVOT: A Multi-Trajectory Dataset and Testbed for Pose, Intrinsics, and Novel Viewpoint Evaluation in Real-World 3D Reconstruction

cs.CV cs.AI ·2026-08-26 ·Mary Raymond
benchmark similarity 0.64
Abstract

Neural radiance fields (NeRFs), 3D Gaussian Splatting (3DGS), and related novel-view synthesis methods are commonly evaluated under capture and reconstruction conditions cleaner than those encountered by robots, drones, and autonomous systems. Benchmarks often rely on reconstruction-friendly trajectories, optimized camera poses and intrinsics, and held-out views sampled from trajectories represented during training. These assumptions can obscure performance with measured poses, reusable camera calibration, and structurally different camera paths. We introduce PIVOT (Pose, Intrinsics and Viewpoint Oriented Testbed), a multi-trajectory dataset, processing pipeline, and evaluation framework for independently studying these factors. PIVOT captures each scene using diverse camera trajectories and retains, where available, both sensor-derived measured poses and COLMAP-optimized poses, together with calibrated and optimized camera intrinsics. It defines three benchmark families: (1) seen versus unseen trajectory novel-view generalization, (2) measured versus optimized pose sensitivity, and (3) calibrated versus optimized intrinsics sensitivity. We also introduce a directed pose-space Chamfer distance to quantify how well training poses cover an evaluation trajectory. PIVOT v1 contains five real-world scenes captured with a DJI Mini 4 Pro and provides an open processing and Nerfstudio-based evaluation toolchain. Benchmark results show a consistent quality gap between held-out views on represented trajectories and unseen trajectories, as well as substantial sensitivity to pose source and camera intrinsics.

0.06

When Left Is Right? Camera-Motion Understanding beyond Screen

cs.CV ·2026-10-12 ·Chong Cheng, Ran Zhang, Xinyuan Li, Alan Zhao, Hao Wang +1 more
positioncode/data similarity 0.64
Abstract

Can a vision-language model tell left from right? Modern VLMs solve visual puzzles and follow hour-long videos, yet when asked whether the camera moved left or right, most do no better than a coin flip. Adding camera-motion data or geometric representations has been tried, separately, and neither closes the gap. We argue that camera-motion understanding needs two conditions at once: the representation must couple off-screen camera motion with on-screen flow dynamics, and it must be interpreted by the language model rather than trained as a standalone pose or depth estimator. We propose CameraVLM, which pairs a motion-state representation with state-language alignment. Camera tokens capture how the camera moves off screen, flow tokens capture how the subject and background move on screen, and a two-stage training strategy keeps language in the loop so that both are learned together with camera-motion semantics. With only 9B parameters, CameraVLM outperforms all open-source and camera-motion-specific models by a wide margin across three benchmarks and more than 20 baselines, and matches or surpasses GPT-6 Astra as well as human viewers in a 48-participant study. Project page: https://3dagentworld.github.io/CameraVLM/

0.56

DAPEVO: Deep Adaptive Patch Frame-Event Visual Odometry

cs.CV ·2026-09-25 ·Luca Gandolfi, Simone Nascivera, Roberto Pellerito, Rong Zou, Chiara Plizzari +1 more
similarity 0.63
Abstract

Visual odometry is essential for autonomous navigation in GPS-denied environments, yet RGB-based methods remain vulnerable to motion blur, challenging illumination, and dropped frames. Event cameras complement conventional cameras with high temporal resolution and dynamic range, but their asynchronous measurements complicate reliable correspondence estimation. We present DAPEVO, a learned visual odometry system that estimates image and event correspondences independently at shared patch locations and fuses their correlation evidence before motion refinement. Each tracked patch maintains image and event descriptors, and a learned scalar gate combines modality-specific correlation embeddings for each patch--frame edge before a shared recurrent refinement and bundle-adjustment update. DAPEVO also supports event-only observations, enabling continued tracking when RGB frames are sparse or unavailable, while modality-aware keyframe culling preserves scarce frame constraints. On UZH-FPV, when retaining only one in six RGB frames, DAPEVO's mean absolute trajectory error (ATE) increases by only 36%, from 1.00 to 1.36m, whereas the ATE of DPVO and RAMP-VO rises by factors of $3.7\times$ and $3.1\times$, respectively. On TartanEvent, DAPEVO similarly remains below 1m ATE at 3Hz RGB input, while DPVO and RAMP-VO exceed 9m. Under degraded RGB input on TartanEvent, DAPEVO achieves an ATE of 0.60m, compared with more than 4m for both DPVO and RAMP-VO, while also outperforming event-only DEVO at 0.87m.

0.16