CS Paper Radar

Benchmark Factory: Agentic Benchmark Creation via Dataset Curation and Label-Free Quality Anchors

Shervin Shahidi, James Poon, Hang Xie, Kenneth O. Xu, Robin Håkanson, Vikram Nair, Jens Pillgram-Larsen, Nachiappan Nagappan

cs.SE cs.AI ·submitted 2026-11-13 19:49 UTC · v1
benchmark

Abstract

Teams deploying coding agents need benchmarks built from their own code, but curating and validating them by hand is resource intensive, and an unvalidated benchmark can mislead silently. We present Benchmark Factory, an autonomous meta-agent loop with human checkpoints: an LLM agent writes sourcing queries over landed production code changes, runs models of known relative strength on each candidate, diagnoses why a candidate fails, and repairs it by editing its queries, prompts, and configuration until it clears quality anchors that need no per-task human labels. We used Benchmark Factory to build benchmarks for five developer cohorts at our organization. Engineering raters scored a 5% sample 2.3 for task quality and 2.6 for grader verdicts on a 1-to-3 scale. On configurations never used to build them, the benchmarks ranked Claude Opus~4.7 at high reasoning effort above low effort (60.6% vs. 54.4% of tasks passed, $p=0.002$) and GPT-5.5 above GPT-5.4 (65.8% vs. 60.5%, $p=0.004$); 9 of the 10 per-cohort comparisons pointed the same way. A deliberately trivial benchmark failed the anchors; five broken graders failed them, even under a relaxed rule fixed in advance that the real grader passes; and with model labels shuffled so that no true ordering existed, random redraws of a candidate passed in at most 1.4% of simulations. The anchors are necessary, not sufficient, conditions for a valid benchmark, designed to focus human review on what the loop cannot repair.

Comment
5 pages, prepared for submission to AGENT 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Benchmarks as Software: Terminal-Bench and the Case for Continuous Benchmarks

cs.AI ·2026-11-05 ·E. Kelly Buchanan, Crystal Zhou, Scott W. Linderman, Christopher Ré
benchmark similarity 0.75
Abstract

Coding agents are among the most economically consequential deployments of LLMs to date, making reliable evaluation increasingly important. Yet even benchmarks that are carefully validated at release can become stale. As models improve, they can discover valid solutions that existing verifiers reject, while changes to evaluation infrastructure can invalidate assumptions embedded in tasks and tests. We call the resulting accumulation of defects benchmark maintenance debt: a growing gap between benchmark scores and the capabilities they are intended to measure. We introduce a continuous-validation workflow for agentic benchmarks that combines community reports, task artifacts, agent traces, automated oracle checks, and human-gated repairs. We apply this workflow to Terminal-Bench 2.0, a benchmark that underwent extensive human and LM-assisted review and red-teaming before release. Our audit identifies issues in roughly 30% of the benchmark, and we release the resulting repairs as Terminal-Bench 2.1. These repairs change evaluation results: accuracy increased by over 10 percentage points and leaderboard positions move by up to three ranks, even as the overall ranking remains highly correlated (Spearman rho = 0.958). We evaluate how resource allocation shapes benchmark conclusions. We show that fixed wall-clock can materially change agent performance: For example, extending the time limit closes a 20pp harness gap on GPT 5.4 and shrinks a 30 pp gap on GPT 5.4 mini to 5 pp. Benchmark maintenance is therefore not only about repairing task artifacts: resource budgets are part of the measurement specification and must be validated alongside the tasks themselves. More broadly, benchmark maintenance debt is not just accumulated implementation bugs: our results show that as models improve, both evaluation assumptions and resource settings may need to be revalidated.

0.32

$τ^τ$-Bench: An Environment for End-To-End, Realistic Agent Construction

cs.AI ·2026-09-04 ·Quan Shi, Keshav Dhandhania, Karthik Narasimhan, Victor Barres
benchmark similarity 0.74
Abstract · 41 pages, 13 figures, 6 tables

LLM agents are rapidly becoming production software, deployed to handle customer service, adjudicate disputes, and operate internal systems. Notably, the work of building them is increasingly handed to coding agents, yet existing benchmarks say little about whether an AI system can deliver one under the conditions of a real client engagement. We introduce $τ^τ$-bench (pronounced hyper-tau-bench), a benchmark that makes agent construction the task. A developer agent is given the records a business actually keeps, a client who holds requirements, a production API that operations must run through, a codebase to inherit, and limits on serving cost and models: the same starting point a real engagement provides. From these it must deliver a complete customer-service agent, scored by deploying that agent against held-out simulated users. Across 53 tasks spanning four domains, the strongest configuration, Claude Opus 5 under Claude Code, passes just 23.9% of evaluation simulations. Meanwhile, an expert-authored reference ceiling scores 82.2%. The failures mirror ones human agent developers see: models issue shallow queries in place of deep comprehension of the records, communicate almost nothing to the client, and experiment too little with agent architecture and serving spend, shipping the first design that runs. We aim for $τ^τ$-bench to turn the work of cooperative agent building into a measurable target for coding agents.

0.49

Agent Benchmarks Stop Ranking Before They Run Out of Tasks

cs.AI ·2026-11-10 ·Zihan Dong, Qishi Zhan, Minxuan Hu
similarity 0.73
Abstract

Data-science and ML-engineering agents are evaluated on benchmarks such as MLE-bench, ALE-Bench, SWE-fficiency and AlgoTune, whose tasks yield a quantity (a Kaggle metric, contest score or speedup). When one stops separating the best models, the usual remedy is a harder version. Re-scoring released runs of eight benchmarks, including SWE-bench Verified and Terminal-Bench for breadth, we find much of this saturation lies in the measurement, not the tasks. Most agent benchmarks reduce a run to one pass/fail bit, which fails in two ways. It is too coarse: neighbouring top-ten agents on SWE-bench Verified differ by less than its tests' errors, and correcting them reorders neighbours no more than deleting a random sixth of each agent's passes. It is capped at the reference: ALE-Bench's top ten, separated by contest score, tie when graded against the median human, although nearly half the runs beat that human. On fixed tasks, a higher bar only moves the problem; graded credit fixes it. We derive a clipped log-ratio score with dated anchors and cost as a separate axis. In a Terminal-Bench re-run, pass/fail-tied models differ over tenfold on the quantity the tests discard.

0.11

AgentSWE: Can Coding Agents Build the Agent You Actually Want?

cs.SE cs.AIcs.LG ·2026-10-09 ·Jiahao Wang, Hongjin Qian, Yuyang Hu, Jiajun Zhang, Zheng Liu
benchmarkcode/datacommunity pick similarity 0.71
Abstract · Code: https://github.com/VectorSpaceLab/AgentSWE

As the production of software passes into the hands of software itself, coding agents are increasingly commissioned to build agents fitted to their users' own workflows. This delegation carries a quiet assumption, that the delivered agent will faithfully serve the requirement it was built for, rather than merely appear to. No existing benchmark tests that assumption. We introduce AgentSWE, a benchmark for agent software engineering spanning three stages of the agent development lifecycle: Creation of a complete agent from a natural-language requirement, Editing of production agent codebases, and Optimization toward a measurable target. Each of its 25 tasks is framed as a commission rather than an exam: the builder iterates against a handful of illustrative cases, while acceptance exercises the frozen submission on held-out cases designed to span the full requirement, grading behavior against requirement-derived rubrics under hard pass/fail gates or, for Optimization, against the source benchmark's own objective. Evaluating a range of coding agents across models and harnesses, we find that none comes close to delivering what a requirement asks for: the gap between what a builder demonstrates and what it delivers is the norm, not the corner case. An accompanying empirical analysis of the failure trajectories identifies recurring failure modes, among them overfitting to the visible cases, hollow runtimes behind code that looks complete, and unsupported claims of completion, each a signal by which coding agents can learn to build the agents they are asked for.

0.32

SWE-Bench Pro V2: A Cleaner, Harder-to-Game Coding Benchmark

cs.SE cs.AI ·2026-10-16 ·Soham Dan, Jeff Da, Sanyam Bhutani, Miguel Romero Calvo, Ivan Guevara +6 more
benchmarkcode/datahighly cited similarity 0.70
Abstract · Dataset: https://huggingface.co/datasets/ScaleAI/SWE-bench_Pro/viewer

SWE-Bench Pro is a widely used benchmark of long-horizon software engineering tasks for coding agents. As agents improve, they reach task issues earlier agents never touched and interact with the evaluation environment in ways the original harness did not anticipate. We present SWE-Bench Pro V2, a revised public split built to keep the benchmark accurate as capabilities advance. Agentic audits, expert adjudication and blind re-implementation repaired or retired 480 of the 731 tasks: 23 contracted engineers spent 404 hours, each working in a language they write professionally, and every revised instruction was verified by a second engineer solving the task from the text alone. A hardened protocol restricts network access to the model endpoint and re-grades every patch in a clean container, so agents cannot retrieve upstream fixes or get credit for changes outside their patch. On the 642 V2 tasks frontier agents resolve up to 99.4% while other systems stay clearly separated, and a 51-task Hard split spreads systems from 52.9% to 98.0%. We release the benchmark and distill lessons for maintaining agent benchmarks over time.

0.49

EvalBuilder: Can LLMs Build Efficient Benchmarks?

cs.AI ·2026-10-14 ·Huaisheng Zhu, Hangfan Zhang, Teng Xiao, Siyuan Xu, Shijie Zhou +3 more
benchmark similarity 0.69
Abstract

Large language model (LLM) agents are increasingly used for long-horizon research and engineering, yet evaluating these capabilities remains expensive, time-consuming, and heavily dependent on human expertise. This motivates a natural question: can LLM agents themselves construct efficient benchmarks that preserve the conclusions of costly reference evaluations? We study this capability by formulating automatic benchmark development as a meta-evaluation problem, where an agent is given a task and an expensive reference benchmark and requested to construct a lower-cost proxy benchmark that faithfully distinguishes among candidate models and solutions. Based on this formulation, we introduce EvalBuilder, a framework for evaluating such benchmark-generation capabilities along three key dimensions: fidelity, efficiency, and robustness. Specifically, we assess whether generated benchmarks preserve model rankings, generalize to held-out models and freshly collected responses, and provide well-calibrated and discriminative scores while substantially reducing evaluation cost. We further provide an iterative environment in which agents can refine their benchmarks under a fixed time budget. Our framework provides a systematic testbed and benchmark for understanding when current LLM agents can develop useful evaluators and how benchmark construction itself can be increasingly automated.

0.19

Efficient Benchmarking in Production: A Study of an Evolving LLM Agent

cs.AI cs.SE ·2026-09-18 ·Yining She, Lei Lin
benchmark similarity 0.69
Abstract · A study of efficient recurring evaluation of a production LLM agent based on real-world historical data

Production LLM agents are evaluated repeatedly as they evolve, but full agent benchmarks are costly to rerun. We study efficient recurring evaluation for a production analytics agent serving tens of thousands of monthly active users and report first-hand deployment experience. Using 574 historical runs of the production benchmark, split chronologically into calibration and held-out periods, we compare random sampling, historical caching, fixed representative subsets, and IRT-based adaptive testing. The results show that multidimensional 2PL adaptive testing achieves the best overall score fidelity: executing 200 questions, 38.5% of a full run, yields 1.03 pp of MAE. We nevertheless deployed difficulty-stratified fixed subsets because of their operational simplicity, and show they transfer without recalibration to five other agent families and remain stable across calibration windows as short as one day. Drawing on this deployment experience, we report practical recommendations for recurring production-agent evaluation.

0.18

DeliverBench: Benchmarking AI Agents on Delivering Realistic Multi-Stage Professional Projects

cs.AI ·2026-11-02 ·Yumou Liu, Mingju Chen, Zhoufutu Wen, Qianyu Yang, Zijie Wang +19 more
similarity 0.69
Abstract

LLM agents are judged by what they deliver, and in professional work what gets delivered is a project, not a task. A project pays off only if the whole package holds together, and one weak part can limit the value of the rest. Yet existing benchmarks mostly test agents on one task at a time, leaving a gap between the capability we measure and the outcome that makes agents useful. To address this gap, we introduce DeliverBench, which tests whether agents can carry a project from brief to final delivery. Reconstructed from real materials with 13 domain experts, its 11 projects span settings such as financial due diligence, legal contract drafting, and drug safety reporting. They comprise 150 subtasks, with 2-15 subsequent releases of new materials and client feedback per project. Later subtasks build on the agent's own earlier deliverables, so unresolved errors can carry into downstream work. Expert rubrics assess each subtask submission and the final delivery package. Across seven model-harness systems, the best scores 65.0/100 on final delivery and passes 50.0% of subtasks at a 90-point threshold. Together, these results suggest that task-level capability does not simply compose into delivery; delivery also depends on keeping the work coherent as it evolves.

0.09