CS Paper Radar

TMA: Sim-to-Real Forceful Humanoid Manipulation via Tactile-Driven Motor Adaptation

Yiting Chen, Kelin Yu, Sarthak Kaingade, Bryan Trinh, Kaiyu Hang, Roberto Martin-martin, Nima Fazeli, X. Alice Wu

cs.RO ·submitted 2026-11-13 22:13 UTC · v1
benchmarkcode/data

Abstract

Recent humanoid loco-manipulation in articulated environments has largely focused on geometry-dominant interactions, where success is primarily determined by geometric alignment and motion execution. In contrast, forceful multi-finger manipulation requires the robot to adapt to real-world uncertainties in contact and interaction dynamics. We present Tactile-Driven Motor Adaptation (TMA) and an integrated whole-body system for zero-shot sim-to-real forceful humanoid manipulation, and study round-doorknob opening as a challenging benchmark requiring stable multi-finger frictional grasping, sufficient torque generation without slip, force-regulated pushing, and whole-body stability. TMA structures policy learning around interactions observable through tactile feedback, uses cone geometry as an inductive bias for multi-finger contact representation, and adapts motor behavior online from tactile history. An upper-body manipulation policy is trained alongside a pretrained general locomotion controller to coordinate dexterous interaction and whole-body stabilization. Trained entirely in simulation, TMA transfers zero-shot to a Unitree G1 humanoid with BrainCo Revo2 multi-fingered hands and substantially outperforms standard Rapid Motor Adaptation (RMA) and reactive tactile policy baselines across four commercial round doorknobs in the real world.

Comment
Project page: humanoid-tma.github.io

Closest papers

Nearest neighbours by meaning across the whole index.

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.74
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

Whole-Body Dexterity

cs.RO cs.AIcs.LGeess.SY ·2026-10-15 ·Conor Mc Gartoll, An Dang, Pranay Thangeda, Arjun Gupta, Carolina Higuera +3 more
similarity 0.73
Abstract · 20 pages, 13 figures

Current humanoid dexterous manipulation remains largely confined to end-effectors and simple grasps, falling short of humans' ability to engage the entire body by bracing and sliding bulky objects against the arms and torso. We introduce Whole-Body Dexterity (WBD), a general framework that uses the robot's body and appendages as contact surfaces to grasp and manipulate objects. Our sim-to-real pipeline first generates a dataset of feasible whole-body grasps, then trains reinforcement-learning experts on a general any-to-any repositioning objective by sampling initial and goal grasps from the dataset, and distills these experts into a single policy that uses proprioception and object geometry. We show that the distilled policy transfers zero-shot to a real Unitree G1, where it repositions a basketball and a cardboard box to regions around the torso and completes a long-horizon task that stows a box under one arm, carries it from a shelf to a table, and places it. The controller operates interactively, steered by coarse motion references from a human teleoperator. Across real-world whole-body manipulation tasks, the distilled controller completes 90% of trials, compared with 18% for direct retargeting and 4% for a generalist whole-body controller.

0.39

FORGE: Force-Aware Multi-Granularity Control for Efficient Humanoid Loco-Manipulation

cs.RO ·2026-11-12 ·Liangjun Xing, Ke Fan, Kailin Li, Bin Wang, Xiaojie Niu +6 more
similarity 0.73
Abstract · 8 pages, 10 figures

Humanoid loco-manipulation requires coordinated locomotion, balance regulation, and manipulation under frequent contacts, making teleoperated demonstration collection difficult: a practical controller must simultaneously provide precision, stability, and contact awareness. We propose FORGE, a force-aware multi-granularity control system with a coarse-to-fine command space spanning velocity navigation, planar foot placement, wrist-pose tracking, and optional force-conditioning inputs. Policy training requires no full-body human motion trajectories or joint-angle references; deployment consumes only sparse bilateral wrist poses relative to the pelvis, coarse motion commands, and optional desired wrist-load inputs. For sustained contact, FORGE combines a momentum observer with a learned correction trained using simulator contact-force supervision. At deployment, it estimates low-frequency, wrist-equivalent interaction forces from proprioception and reconstructed low-level arm PD torques, without wrist force/torque sensors. A quasi-static virtual-target loop uses this estimate and an optional desired applied-force input to adapt the wrist target. A frozen locomotion prior and asymmetric residual actions stabilize manipulation-induced whole-body corrections. Experiments evaluate unified-control stability, task-space tracking, quasi-static wrist-equivalent force estimation, squeezing forces during sustained contact with a rigid box, and downstream diffusion-policy execution of a squat-and-lift task across payload conditions. Website: https://bb0928.github.io/forge/.

0.15

Kinematic-Tactile Aligned Dexterous Retargeting with Contact Wrench Space Alignment

cs.RO ·2026-10-29 ·Xinyuan He, Ziheng Xu, Yueyuan Chen, Yufan Ye, Yuanshuo Tan +4 more
similarity 0.72
Abstract · 8 pages

Human demonstrations provide a natural and scalable source of data for learning dexterous manipulation policies. However, existing retargeting methods primarily transfer human kinematics, while the tactile information underlying physical interaction is rarely preserved across embodiments. To address this limitation, we present a hierarchical three-stage framework for kinematic-tactile aligned dexterous retargeting. We use object-centric contact wrench space as a physical representation for tactile alignment between human and robot hands. The framework first aligns hand kinematics and contact geometry, and then constructs a human wrench support profile from tactile forces and contact geometry. Robot fingertip force targets are subsequently optimized to cover the human wrench support and converted into joint position corrections, yielding directly replayable robot hand trajectories. We evaluate the framework in simulation and real robot experiments across three pouring conditions. In the real robot experiments, our method achieves a 96.7\% replay success rate and higher wrench transfer fidelity than representative retargeting baselines. The framework enables physically grounded transfer of kinematic and tactile information from human demonstrations to robot hands, providing a path toward scalable learning of contact-rich dexterous manipulation.

0.14

Gated Residual Body-Hand Coordination for Whole-Body Humanoid Teleoperation

cs.RO ·2026-09-16 ·Ruiming Wu, Shuang Li, Liding Zhang, Alois Knoll, Zhaopeng Chen
similarity 0.72
Abstract

Whole-body humanoid teleoperation commonly combines a motion-tracking policy with a separate dexterous-hand retargeter. However, independently generated commands do not explicitly preserve body-hand geometric relations, leading to mismatches in relative wrist poses and fingertip positions during bimanual interaction. We present a gated residual coordination framework that keeps both modules frozen and applies bounded corrections to their outputs. A motion-conditioned action gate allocates correction authority across joint groups, while reference-geometry-dependent reward gates emphasize relevant interaction objectives during training. To establish the nominal body controller on Agile One, we introduce multi-pose morphology calibration that jointly estimates triaxial scales and effector-local offsets, together with staged motion dataset curation for training a SONIC-based tracker. The residual policy uses human motion references, initial commands, and robot proprioception without explicit object or contact observations. In simulation, it reduces wrist and fingertip geometry errors by 39.2-56.3% over direct composition on held-out GRAB motions, while preserving whole-body tracking on AMASS, with success rates of 89.03% without residual coordination and 89.29% with it. Ablations characterize the contributions of reward gating, adaptive correction authority, and separate body and hand correction heads.

0.43

HiFun: a Hierarchical Framework for Efficient Functional Dexterous Manipulation Learning

cs.RO ·2026-10-14 ·Linyi Huang, Guowei Huai, Weibin Liu, Shulong Jiang, Ping Tan +3 more
code/data similarity 0.72
Abstract

While multi-fingered dexterous robot hands have the potential to provide human-level dexterity, using them for functional manipulation remains difficult because task success depends on precise contact, coordinated arm-hand motion, and reactive recovery from execution errors. Precise contact depends on complex contact dynamics that are difficult to model accurately in simulation, motivating real-world learning. However, real-world demonstrations in the full arm-hand control space are costly and noisy because each trajectory must coordinate arm motion with high-DoF multi-finger contact. Small execution deviations can further cause slipped contact or premature force application, making recovery from off-nominal contact states important for robust execution. To deal with these challenges, we propose HiFun, a hierarchical real-world RL framework for functional dexterous manipulation tasks. Our key insight is to decouple the control complexity into a functional hand skill for precise contact execution and an arm-hand coordination policy for arm control and hand-skill activation. This design enables effective real-time human intervention for reactive recovery learning and efficient data collection with Dynamic Movement Primitive (DMP) augmentation. Across six real-world tasks on two dexterous hands, HiFun achieves 98.3% average success within one hour of online training and remains robust to dynamic disturbances. The project page is available at https://hly-123.github.io/HiFun/.

0.23

TacBPM: A Tactile-conditioned Behavior Prior Model for Dexterous Reorientation

cs.RO ·2026-09-16 ·Jie Yin, Wanli Xing, Zeyuan Zhao, Xuezhou Zhu, Zhijie Deng +1 more
similarity 0.72
Abstract · Corresponding to: Jie Yin (jie.yin@sharpa.com)

Dexterous in-hand manipulation requires policies that coordinate high-DoF hand joints through intermittent, contact-rich interaction. Beyond target-orientation tracking, such policies must discover finger gaits that preserve object stability while adapting to geometry, anisotropy, pose, contact, and sensing changes. We propose \method, a tactile-conditioned behavior prior model for dexterous reorientation. \method distills multi-scale sphere specialists into a latent controller and lets downstream policies reuse the fixed tactile prior through residual latent actions, reducing renewed exploration from raw joint commands. The prior conditions on tactile-proprioceptive history so latent behavior reflects the current hand-object interaction. We evaluate arbitrary-pose transfer across anisotropic objects, commanded-axis rotation, and an arm-hand Grasp-to-AnyPose task in which the robot must grasp, lift, transport, and reach goal poses for novel tool geometries and generalized placements. Extensive experiments demonstrate that the proposed method accelerates training and enables stable policies where matched raw-action PPO remains near failure, with successful sim-to-real transfer in in-hand and arm-hand tasks.

0.20

OATH: Object-Agnostic Tracking for Dexterous Hands, Enabling Rapid Physics-based Retargeting

cs.RO ·2026-10-09 ·Solvin Sigurdson, Prasanna Sriganesh, Juan Borbon, Joel Burdick, Dingqi Zhang +1 more
code/data similarity 0.72
Abstract · 8 pages, 7 figures, 3 tables. Project page: https://multiplylabs.github.io/oath/

Retargeting human demonstrations into dynamically feasible dexterous hand trajectories requires resolving complex contact physics, yet current methods either omit physical constraints or rely on computationally expensive sampling-based optimization in simulation. Reinforcement learning has previously been used to achieve planning and control through contact dynamics; however, standard policies require object-specific training and fail to generalize across arbitrary geometries. This work reframes physics-based retargeting as a residual learning problem, where we demonstrate that zero-shot generalization across objects relies on structured state representations. Specifically, formulating the observation space to include a localized contact-error signal guiding each robot link to its target coordinate on the object surface enables a single, unified residual policy to successfully grasp novel, unseen object geometries. Rolling out this policy in simulation on a kinematic reference trajectory yields a physics-based retargeter, OATH. Operating at 0.4 seconds of compute per second of reference, OATH achieves 2.4x faster-than-real-time performance and a 60-350x reduction in computational cost compared to sampling-based methods. The system recovers 58% of held-out and 54% of unseen-object DexYCB trajectories while maintaining a sub-2 cm tracking error.

0.29