CS Paper Radar

SPARC: Evidence-guided adaptive model composition for materials discovery

Sissi Feng, Yuchen Han, Runze Zhang, Jiaru Bai, Brandon Sutherland, Ali Shayesteh Zeraati, Jason Hattrick-Simpers, Varinia Bernales, Alán Aspuru-Guzik, Yang Bai

cs.AI cond-mat.mtrl-scics.LG ·submitted 2026-11-14 00:46 UTC · v1
hot direction

Abstract

Closed-loop experimentation requires more than selecting the next experiment. It must also determine which existing measurements and model-derived relationships are sufficiently supported to influence that decision. Here we introduce SPARC (Sparse Predictive Aggregation of Regression Components), a framework that continually revises this support as experimental evidence accumulates. Competing model families are evaluated through out-of-fold predictions, so that each model is tested on observations not used in its corresponding fit. Sparse posterior composition assigns model influence according to predictive contributions supported by the out-of-fold evidence, retaining complementary contributions from several model families. Candidate-dependent predictive dispersion and residual variability define trust, which modulates exploration alongside the predicted response. Independent diagnostics also prioritize existing measurements for prospective verification, with model-derived trust reported alongside them. Across eight published materials datasets, SPARC achieved higher $R^2$ than the corresponding literature-reported values in six, with relative gains of up to 77% without the density-functional-theory- or experiment-derived descriptors used by several published pipelines. In an automated alkaline oxygen-evolution-reaction campaign, 8 of 11 SPARC-selected experiments reached overpotentials below 300 mV, with a best value of 242 mV, compared with 18 of 125 initial experiments. Measurements prioritized for verification before repetition subsequently deviated by 76 mV on average, compared with 27 mV for matched controls. SPARC therefore turns experimental evidence into a basis for revising model influence, directing exploration and identifying measurements that warrant verification.

Comment
52 pages, 5 figures; main text with Supplementary Information

Closest papers

Nearest neighbours by meaning across the whole index.

Out-of-the-Box Tabular Foundation Models for Bayesian Optimization in Materials Discovery

cs.LG stat.ML ·2026-11-09 ·Klemens Flöge, Simon Bing, Leo Grinsztajn, Eliott Kalfon, Lennart Purucker +2 more
publishedcode/datahot direction similarity 0.63
Abstract · Accepted at the AI4Mat Workshop at NeurIPS 2026. 19 pages, 12 figures, 5 tables. Code: https://github.com/PriorLabs/matsci-bo-bench

Bayesian optimization is widely used in active learning loops for materials science. Gaussian processes serve as the de-facto surrogate model family, but require task-dependent kernel choices and can lack the modeling capacity for complex relationships. Tabular foundation models (TFMs) have recently emerged as the state-of-the-art for predictive tasks on structured data, without requiring bespoke kernels or hyperparameter tuning. We evaluate two TFMs, TabPFN and TabICL, as out-of-the-box surrogate models on two standard materials science benchmarks, comparing against a large field of baselines encompassing Gaussian processes, random forests, and CatBoost. Our findings indicate that TFMs are highly competitive surrogate models across the two benchmarks, without task-specific training for active learning or GP kernel selection. Our results motivate developing TFMs further as surrogates for active learning in materials discovery.

0.54

MOTIF: LLM-Defined Material Taxonomies for OOD Property Prediction via Invariant Feature Selection

cs.AI ·2026-11-09 ·Gwangseon Jang, Sieun Yun, Dong Ho Lee, Kyong-Ha Lee, Chanuk Lim +2 more
benchmark similarity 0.62
Abstract · 37 pages, 18 figures, 33 tables. Preprint

Out-of-distribution (OOD) generalization remains a central challenge in materials property prediction, where models must extrapolate to novel chemistries beyond the training distribution. While large language models (LLMs) have demonstrated strong scientific reasoning, their direct use for quantitative prediction remains limited. To address this, we systematically evaluate multiple roles for LLM assistance, finding that only taxonomy-based grouping consistently improves OOD generalization over a strong kNN+GBT baseline. Building on this, we here propose MOTIF, a framework that leverages LLMs not as predictors, but as generators of candidate taxonomies that partition materials into chemically meaningful environments. These taxonomies are evaluated via training-only pseudo-OOD validation, and only those that improve generalization are retained. Invariant feature selection is then applied within each accepted taxonomy, followed by gated aggregation across taxonomies. We evaluate on 2D halide perovskites, where bandgap prediction must generalize across distinct organic spacer families. On this benchmark, MOTIF reduces mean OOD MAE from 0.122 to 0.111 eV. Under a frozen dev/test protocol, the deployable configuration further improves errors from 0.123 to 0.117 eV (electronic bandgap) and from 0.181 to 0.173 eV (optical bandgap). Beyond this primary task, we validate transferability across additional materials datasets, including 3D perovskite solar cell efficiencies and Matbench benchmarks with structure-based splits. Across domains, MOTIF consistently improves robustness under distribution shift, outperforming expert-defined groupings, rule-based heuristics, and clustering baselines, while remaining competitive with strong classical selection methods. These results demonstrate that LLMs are most effective not as predictors, but as tools for discovering structure in data.

0.21

Benchmarking language models and agents for scientific reasoning in evolving materials laboratories

cs.AI cond-mat.mtrl-scics.CEcs.LG ·2026-11-09 ·Xuyu Dong, Yixuan Li, Jianguo Huang, Feng Chen, Yiyun Zhou +3 more
similarity 0.61
Abstract · 36 pages, 5 figures, 2 tables

Large language models and the multi-agent systems built around them could accelerate materials discovery by connecting scientific knowledge with experimental decisions. Existing benchmarks establish capabilities in domain knowledge, multimodal interpretation and scientific tool use. As language models increasingly support materials research workflows, their ability to distinguish closely related material states and reason accurately with quantitative evidence remains insufficiently evaluated. These abilities are essential for comparing material responses, assessing mechanisms and maintaining reliable judgements as experimental evidence accumulates. We introduce MatScope to evaluate three connected capabilities. M1 tests unaided, condition-specific reasoning through 200 tasks spanning ten research functions, using aluminium and high-entropy alloys as representative material systems. M2 tests agent-assisted transfer of related knowledge to unresolved materials questions. MatEvoBench-20 tests initial forecasts across scientific dependency chains and revisions of still-hidden responses as observations accumulate. Across eleven model deployments, including GPT-6 Astra and Claude Fable 5.1, given-input calculations and many physical explanations are handled well. Fine-grained response estimates, comparisons between similar states and quantitatively supported choices remain substantially weaker. Related literature improves selected estimates, while condition and baseline mismatches limit transfer. Progressive observations calibrate some downstream responses and destabilize earlier accurate predictions. MatScope establishes measurable targets for developing reliable scientific reasoning in future self-evolving materials laboratories and materials-aware world models.

0.15

SPEAR: Structure Property Explainability with Attention Regularization

cs.LG cond-mat.mtrl-sci ·2026-08-13 ·Aditya Raghavan, Utkarsh Pratiush, Dalton A. Pearl, Jade Holliman, Katharine Page +2 more
similarity 0.61
Abstract

Machine learning is increasingly used to learn structure property relationships from spectroscopic and diffraction data, yet its adoption in materials discovery is often limited by poor interpretability of model predictions. Although attention mechanisms are frequently treated as inherently explainable, unregularized attention can yield unstable, fragmented, or intensity driven attribution patterns that obscure the physical origin of these relationships. Here we introduce SPEAR (Structure Property Explainability with Attention Regularization), a framework that constrains attention distributions during training to improve their stability, selectivity, and physical interpretability. SPEAR augments attention based regression with a learnable temperature that controls attention concentration and a smoothness penalty that enforces coherence across neighboring spectral positions, treating attention as a learnable explanatory object rather than a post hoc visualization. Using synthetic spectral benchmarks with known generative structure, we show that attention regularization produces smooth, contiguous attribution profiles aligned with causal features while preserving predictive accuracy. Applied to experimental X ray diffraction data from a combinatorial rare earth zirconate thin film library, the regularized model selectively emphasizes physically relevant diffraction features and decouples feature importance from raw peak intensity. The reflection it identified prompted a reassessment of our earlier structural analysis, revealing a correlation between the 220 peak position, the tetragonal distortion that accommodates cation size disorder, and the local thermal conductivity. Attention regularization therefore provides a principled training constraint for explainable structure property regression, yielding mechanistically meaningful explanations without sacrificing predictive performance.

0.04

Scientific Discovery under Validation Congestion via Multi-Fidelity Pairwise Rankings

cs.LG ·2026-10-01 ·Kevin Tirta Wijaya, Alston Lo, Michael Sun, Wojciech Matusik, Vahid Babaei
similarity 0.60
Abstract

Modern computational methods can now propose candidate molecules, materials, and other scientific designs at an unprecedented scale, creating a validation congestion where candidates are abundant, but experimental capacity to physically evaluate them remains scarce. Discovering novel scientific designs has therefore become increasingly dependent on curation: selecting a small set of promising designs for slow and costly experiments. Existing curation methods typically rely on data-driven regression models that predict absolute scores, but training these models requires substantial experimental data to begin with. Yet, useful curation signals do not have to take the form of absolute measurements, as scientific design discovery is often comparative in nature. Here, we propose that curation can instead be primarily driven by expert pairwise rankings, which are substantially easier to gather. The expertise can come from computational tools or human input of multiple levels of fidelity, ranging from empirical rules of thumb to agentic workflows and experienced scientists. We introduce PRISMS, a framework that uses pairwise rankings from one or more experts, potentially spanning multiple levels of expertise, to identify the most promising candidates without relying on data-hungry regressors. When experts differ in fidelity and cost, PRISMS escalates pairwise queries from lower- to higher-fidelity rankers based on a Fisher-information criterion. In iterative screening that selects designs from fixed drug discovery libraries, PRISMS achieves 50% top-10 discovery recall in ~42% fewer rounds than regression-only active learning, and in ~15% fewer rounds than the ranking-based method with no selective escalation. In optimization that generates new designs without restriction to a predefined library, PRISMS achieves ~18.8% higher hypervolume than the Bayesian optimization baseline.

0.19

Systematic Evaluation of Training Data Generation Strategies for Machine Learning-Based Molecular and Materials Property Prediction

cs.LG cond-mat.mtrl-sci ·2026-11-12 ·Minh Nghia Nguyen, Beate Paulus, Akhil S. Nair
similarity 0.60
Abstract

Machine-learning (ML) models for molecular and materials property prediction are often trained on large datasets curated through arbitrary or generic sampling strategies. Such approaches can lead to the over- or under-representation of regions of chemical and materials space that are most relevant to the prediction task. An important challenge is therefore how to efficiently curate training data to maximize predictive performance while minimising the number of labelled examples required. Here, we systematically compare training data acquisition strategies for molecular and materials property prediction, ranging from random sampling to various active learning approaches. We evaluate their performance across different model classes, representations, datasets, and target properties. Our results show that the effectiveness of data acquisition strategies depend strongly on the interplay between the model, dataset, and prediction task, although uncertainty-based sampling generally outperforms alternative strategies. Based on these findings, we derive guidelines for selecting data acquisition strategies under a given labelling budget.

0.21

Divergent strategies and convergent outcomes in autonomous materials discovery

cs.AI cond-mat.mtrl-sci ·2026-09-21 ·Jihan Kim
similarity 0.60
Abstract

Scientific agents are mostly evaluated on whether they complete tasks or recover known results; we instead study variation across repeated open-ended campaigns. Sixteen separately initialized sessions of one model-harness configuration received a frozen database of 12,499 metal-organic frameworks, a methane-storage objective, a pinned protocol and a one-week budget. Strategies diverged into four approaches spanning 100--5,000 screened structures, and eight built 2,253 hypothetical structures. Yet the agents recovered the same materials frontier near 200 cm^3/cm^3, and an independent calculation of the database's porous region found its nine best structures all among their reports. Enforced checks on half the agents raised fresh-run reproduction from one of eight to eight of eight but could not detectably improve conclusion validity, because fifteen of sixteen agents selected the same audit-excluded entry, an incomplete structure whose missing anions created artificial pore volume. Replicated agents thus reveal both robust conclusions and common-mode errors from shared inputs.

0.18

MineralExp: Benchmarking LLM Agents for Experimental Design in Real-World Mineral Exploration

cs.CL cs.AIcs.CE ·2026-11-13 ·Bing Wang, Mingyang Wang, Yuanhang Mi, Yue Xu, Kaibo Su +6 more
benchmarkhot direction similarity 0.60
Abstract · 16 pages, 6 figures

In mineral exploration, verifying geological hypotheses relies on designing a variety of geochemical experiments. While large language model (LLM) agents increasingly automate downstream geoscientific data analysis, a crucial upstream capability remains largely unexplored: automated geochemical experimental design, i.e., deciding which experiments to conduct before committing to costly laboratory work. Evaluating this capability of LLM agents is difficult for two reasons. First, geochemical experiments exhibit high methodological diversity and subjectivity: to test the same hypothesis, different geologists may choose different minerals and instruments, so no single protocol can serve as the reference answer. Second, open-ended experimental plans resist representation as structured labels, which makes objective scoring difficult. To address these challenges, we introduce MineralExp, a benchmark that reformulates geochemical experimental design as a hypothesis-based experiment selection problem, i.e., a multi-label classification problem. We abstract concrete instrument names and procedural details into a shared taxonomy of 19 experimental types across five mineral-system processes: Source, Transport, Deposition, Modification, and Preservation. This taxonomy yields deterministic multi-label targets while accommodating diverse experimental protocols. Constructed from published ore-deposit literature and verified by domain experts, MineralExp comprises 277 cases and 1,572 reference experimental plans. Given a geological hypothesis and initial context, an LLM agent selects the relevant tasks and generates concrete experimental plans, which are scored by multi-label classification metrics and an LLM-as-a-Judge metric. The experimental results show that current agents generally achieve high recall but low precision, tending to propose more experiments than are necessary to test the hypothesis.

0.31