CS Paper Radar

From Sensors to Silicon: Causal Cross-Layer Self-Healing Edge AI for Secure and Energy-Adaptive IoT Systems

Mostafa Darvishi

cs.AI cs.ARcs.ETeess.SP ·submitted 2026-11-14 05:14 UTC · v1

Abstract

The migration of artificial intelligence from centralized cloud infrastructure to resource-constrained Internet-of-Things (IoT) devices reduces communication latency and improves data locality, but it also tightly couples sensing quality, inference behavior, microarchitectural activity, hardware reliability, security, and energy management within the same physical node. Existing edge-intelligence solutions predominantly address these dimensions in isolation, making it difficult to determine whether an observed degradation originates from sensor malfunction, data-distribution shift, malicious execution, hardware faults, or resource and thermal stress. This paper presents a causal cross-layer self-healing Edge-AI framework that continuously observes synchronized telemetry spanning sensor health, inference uncertainty, processor hardware-performance counters, accelerator and memory activity, power and thermal state, and communication conditions. A temporally informed causal reasoning engine estimates the most probable origin of abnormal behavior and quantifies diagnostic uncertainty, including under concurrent perturbations.

Comment
55 pages, 27 figures, 15 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Seamless Deployment of Machine Learning Inference at the Far Edge: An Empirical AWS IoT Greengrass Architecture for Industrial Predictive Maintenance

cs.DC cs.AI ·2026-10-10 ·Prince Kwabena Appiah Boadu, Jeffery Baafi Kyei, Enoch Kofi Koranteng, Griffth Selorm Klogo
top venuehot direction similarity 0.65
Abstract · Conference paper draft in IEEE format, with code appendices. Already accepted in AiBThings - IEEE 4th International Conference on Artificial…

Industrial IoT sensors produce continuous, high-volume data streams that predictive maintenance needs to analyse in real time. Cloud-centric architectures send all raw telemetry to central servers, which costs latency, bandwidth and resilience. This paper presents a hybrid cloud-edge architecture for manufacturing predictive maintenance built on AWS IoT Core and AWS IoT Greengrass v2, with local machine learning inference at the edge and selective cloud synchronization. We deploy two configurations on real AWS infrastructure and compare them: a cloud-only baseline (Configuration A) and the proposed hybrid edge architecture (Configuration B). We measure end-to-end inference latency, bandwidth consumption and inference accuracy. Configuration B cuts cloud-bound bandwidth by 86.8% (63.6 KB to 7.2 KB per 200-reading window) and decision latency by 256x (23.1 ms cloud round trip to 0.09 ms local inference). At the edge, with no cloud involvement, it keeps an anomaly-class F1 score of 0.84 and 91% recall. The evaluation also instruments system uptime and Stream Manager queuing under cloud disconnection; the quantitative disconnection experiment is left as planned work. Our review of the literature points to four gaps that this work addresses: the lack of empirically validated Greengrass v2 deployments for predictive maintenance, unquantified bandwidth savings from selective edge synchronization, unmeasured resilience under cloud disconnection, and the open MLOps feedback loop at the edge.

0.44

Edge Computing for IoT-Enabled Smart Cities: A Review of Middleware, Explainable AI, and User Behavior Analytics

cs.SE ·2026-11-12 ·Alexandros Gazis, George Vavouras, Nikos E. Mastorakis, Kleanthi Santamouri, Nikolaos Pournaras +1 more
surveybenchmark similarity 0.64
Abstract · 31 pages, 4 figures, 10 tables, 87 references

This review looks at cloud-IoT edge middleware for analyzing user behavior in smart cities, with a particular focus on linking behavioral analytics to energy-aware and mission-critical urban services. The topic sits at the crossroads of smart-city platforms, IoT sensing, edge/fog/cloud computing, service-oriented architectures, machine learning, explainable AI, privacy-aware governance, and energy-critical applications such as EV charging, energy demand, environmental exposure, crowd safety, and the operational resilience of urban infrastructure. As such, this paper maps out the main categories of user-behavior data, examines five application domains, compares several case studies, and puts forward a new XAI-EdgeSOA Middleware Framework called X-EdgeCity Middleware. This framework brings together IoT sensing, edge preprocessing, fog coordination, event-driven communication, cloud analytics, XAI explanations, privacy-by-design, and benchmark logging. The goal is to support not just general smart-city applications, but also energy-sensitive or mission-critical services, where latency, reliability, explainability, and accountability have a direct impact on urban safety and continuity of operations.

0.29

Infrastructure-Aware Runtime Protection of Co-Deployed AI Services at the Industrial Edge

eess.SY ·2026-10-13 ·Nitya Sathyavageeswaran, Dibyajyoti Nath, Ziran Min, Pavan Athreya Narasimha Murthy
similarity 0.64
Abstract

In modern production lines, a single edge device simultaneously runs multiple AI services like a torque-control model, a vision inspector, a predictive maintenance routine. All these services run on the same CPU and same shared network segment. When the shared network segment saturates, the services do not crash. The services just produce outputs that are inaccurate or stale, and no longer reflect the plant's conditions. Our paper targets this class of silent, partial failure scenarios in Industrial Edge Systems. We treat each co-deployed service as an autonomous agent. We introduce the Runtime Criticality Score (RCS), which each service agent uses to express at any moment, its intrinsic utility and survival urgency under resource constraints. The score is computed from six normalized dimensions covering physical consequence, inference quality, input freshness, recent availability stress, actuator coupling, and available protective actions on the host. Its dimension weights are adjusted online through a lightweight Bayesian update driven by the type of disturbance currently observed, so the same service is ranked differently under a network delay than under thermal throttling. Agents publish their RCS to peers over an open, peer-to-peer discovery channel, and use it to negotiate three things without a central controller: (i) local threshold enforcement on their own host, (ii) migration to a willing peer when the current host can no longer protect them, (iii) reassignment of the coordination role when the incumbent coordinator is itself impaired. Beyond the immediate benefit of catching silent degradation, the framework contributes a concrete instance of decentralized, physically grounded agent coordination. Agents belonging to different owners can advertise capabilities, bid for protection, and reorganize across an open network.

0.14

CRAFTER: Causality-based Self-adaptation for Autonomous IoT Systems

cs.AI ·2026-10-05 ·Houssam Hajj Hassan, Ajay Kattepur, Denis Conan, Georgios Bouloukakis
top venue similarity 0.63
Abstract

This paper presents CRAFTER, an automated framework for designing and deploying self-adaptive IoT systems using Causal Reinforcement Learning (CRL). As IoT devices increasingly populate pervasive computing spaces, smart environments are enabled with advanced monitoring and interactive services. The dynamic nature of these environments, such as fluctuating workloads and evolving application demands, poses significant challenges in maintaining consistent Quality of Service (QoS) levels of IoT applications. While existing self-adaptation techniques offer adaptive capabilities, they are often designed to deal with specific application domains, hindering the design of self-adaptive solutions that can be re-used across multiple IoT verticals. In addition, there is a lack of automated pipelines that act on identifying key performance drivers to take effective adaptation decisions. CRAFTER addresses these issues by using Causality as a formal framework for performance analysis of IoT systems. CRAFTER generates causal graphs to uncover dependencies among system components and guide adaptation decisions based on cause-effect relationships. Then, adaptation agents can leverage this knowledge to take more effective adaptation decisions in dynamic situations. Our experimental evaluation demonstrates how CRAFTER enables deriving causal graphs spanning diverse IoT use cases. Furthermore, we showcase how CRAFTER improves self-adaptation performance by 25% compared to state-of-the-art Reinforcement Learning-based approaches.

0.45

Edge Computing for Computer Vision in IoT: Feasibility and Directions

cs.NI cs.CVcs.DC ·2026-11-08 ·Panagiotis Savvidis, George A. Papakostas
top venuehighly cited similarity 0.62
Abstract

The convergence of decentralized architectures integrating Machine Learning, Computer Vision and Low Power Wide Area Networks is increasingly becoming an integral part of our daily existence. Internet of Things serves as a real-time data conduit enhancing decision making via embedded technology and continuous data exchange. This paper explores the feasibility of Edge Computing as a foundational pillar in this evolving landscape. We experiment under real world, dynamic conditions, evaluate the technological aspects, strategies, process flows and key observations under the broad Edge Computing domain. Research pathways include Multi-access Edge topologies in future 6G networks, model quantization, and satellite-enhanced communication platforms. Additionally, a discussion is added supporting the advanced AI functionalities, including zero-shot learning, multi modal perception, and decentralized generative AI, thereby broadening the scope of intelligent applications across various domains. The significance and research objective of this study are threefold: (1) evaluation of LoRaWAN and satellite IoT communication strategies, (2) analysis of CV workloads on edge hardware and (3) future research directions where Edge Computing can support low-latency, energy-efficient and socially impactful IoT applications. By explicitly addressing these aspects, we aim to establish a clear link between the technological feasibility, ultimately with a practical and socioeconomic relevance.

0.54

Enhancing Edge AI System Security with a Stacked Hardware Security Controller for Robust and Energy-Efficient Anomaly Detectio

cs.CR cs.ET ·2026-10-31 ·Carl Benda, Eren Kurshan, Paul Franzon
similarity 0.62
Abstract · IEEE 3DIC Conference

In recent years, the growing adoption of Edge AI systems has been accompanied by a surge in security threats. Edge AI deployments face an rapidly evolving spectrum of security threats, from side-channel information leakage to ad- versarial model manipulation and physical device tampering. Conventional security mechanisms such as malware scanners and resource-intensive firewall solutions are unsuitable due to edge AIs typically limited computational resources, strict energy budgets and thermal constraints especially in battery-powered and field-deployed environments. This paper proposes a stacked, hardware-based security mechanism that enables low-overhead, continuous detection of anomalous execution patterns. Anomaly detection utilizing hard- ware performance counters and physical sensors outperforms software-based alternatives by providing key capabilities such as tamper-resistant root-of-trust isolation, negligible runtime overhead, and resilience against compromised operating systems. Experimental analysis shows that adversarial or malicious ap- plications produce observable deviations in sensor and thermal readings on Edge AI systems and hardware-based anomaly detection provides effective and low-overhead anomaly detection.

0.13

Making the Telemetry Pipeline Measurable: An Edge IoT Testbed and Dataset for End-to-End Latency, Provenance, and Energy-Aware Benchmarking

cs.DC cs.NIcs.SE ·2026-10-26 ·Dimitris Gkoulis
benchmark similarity 0.60
Abstract

Edge-centric IoT systems are increasingly evaluated through sensor values or platform features, yet the telemetry pipeline itself, the sequence of sensing, serialization, message mediation, ingestion, and persistence, is rarely released as a measurable object. This limits reproducible benchmarking of timeliness, provenance, and operational cost, especially in early-stage IoT design where real deployments and high-quality open data are often unavailable. I present a measurement-first edge IoT testbed and dataset that elevate timeliness, provenance, and energy to first-class telemetry dimensions. The testbed operationalizes a role-based event-driven architecture with explicit Source-Broker-Aggregator responsibilities and a schema-governed TelemetryMessage envelope (Avro) that embeds correlation identifiers and a uniform, cross-role vocabulary of stage-level timestamps. To trace mediation effects, I extend an MQTT broker (Eclipse Mosquitto) with a plugin that annotates messages with high-precision ingress/egress timestamps. I release the dataset in a dual representation: (i) replayable raw events as compressed Avro streams and (ii) analysis-ready long-format Parquet tables partitioned for efficient query and benchmarking, generated by a deterministic raw-to-tabular transformation pipeline. The contribution is an integrated engineering artifact and dataset built from established components. The demonstration describes one deployment through latency summaries, measurement-context distributions, and energy aggregates; it does not establish a new attribution method or a controlled performance benchmark. By co-releasing heterogeneous telemetry with pipeline timing and energy signals in both replayable and queryable forms, the artifact provides a basis for reproducible exploratory analysis and subsequent benchmarking studies.

0.20

Hybrid Hierarchical Runtime Verification for Edge-IoT Security: Combining MonPoly and RTLola

cs.CR cs.DCcs.LO ·2026-10-07 ·Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios +3 more
publishedhighly cited similarity 0.59
Abstract · 19 pages, 2 figures, 7 tables. Published in Availability, Reliability and Security (ARES 2026), EU Projects Symposium Workshops, Springer LN…

Security monitoring of edge-IoT fleets faces three structural challenges. (i) A per-node monitor is cheap but cannot see attacks that coordinate across devices. (ii) A cloud monitor sees the full fleet but pays for that view in bandwidth. (iii) Even at the cloud, a monitor built on a single RV engine can be fooled by an attacker who compromises a device, raises one malicious request, and then goes silent: once the events stop, an event-triggered monitor has nothing left to evaluate. We propose a three-layer hierarchical runtime-verification framework that addresses all three. The edge layer classifies events as they happen, the gateway layer aggregates short windows of per-device behaviour, and the cloud layer runs two complementary RV engines. MonPoly handles first-order temporal correlation over the merged alert stream: coordinated overflow (which genuinely quantifies across devices) plus per-device multi-vector APT, escalation, and persistent-campaign patterns. RTLola handles a time-triggered silent-node property that an event-triggered engine cannot detect within a bounded delay under fleet silence. We evaluate the framework on a 15-actor Docker testbed covering eight attack profiles plus a silent-bypass scenario. In the controlled labelled testbed, every device-attributable incident the framework raises names an attacker-labelled device, and the RTLola tier catches silent-bypass attempts the event-triggered tier misses. Per-event monitoring stays in the microsecond range at the edge and gateway, with low end-to-end alert-to-incident latency at the cloud.

0.58