CS Paper Radar

Does a completed simulation run mean a usable urban wind result for AI agents?

Zhongke Qu, Yunwei Zhang, Junwei Su, Yabin Zhang, Chengwei Li, Qingxiang Shui, Hailong Qu, Zhaolin Gu

cs.AI ·submitted 2026-11-14 12:50 UTC · v1

Abstract

AI agents based on large language models (LLMs) can now configure and run computational fluid dynamics (CFD) solvers, but a completed run does not ensure that delivered metrics can be recomputed from raw outputs. This gap was examined for urban wind simulation, where multi-case comparisons must hold non-target conditions fixed and reported values must be traceable to raw samples. UrbanWind-AgentBench, comprising 200 tasks and 367 cases in 10 engineering task families, was constructed. Public task contracts specify variable factors, fixed conditions, numerical thresholds and deliverable requirements, and two-layer scoring separates a structural score for deliverables, run provenance and raw evidence from a numerical score obtained by independent recomputation against references. WindPilot was then proposed as an execution framework that incorporates contract parsing, execution provenance, deterministic verification and bounded acceptance review into the LLM execution loop. On 30 OpenFOAM tasks with independent references, at least the structural maximum of 60 points was reached by a base agent on 28 tasks, but numerical credit was obtained on only 6. With the same model name and budget, WindPilot increased the number of tasks with numerical credit to 17, full-score tasks from 0 to 3 and the mean task score from 62.5 to 72.5. Mean action steps fell from 130.4 to 104.9, and mean token consumption decreased by 12.9%. The mean gain for atmospheric boundary layer (ABL) tasks was 18.5 points. A completed simulation run is therefore not sufficient for a usable urban wind result; usability depends on checks that tie reported metrics to raw evidence during execution.

Closest papers

Nearest neighbours by meaning across the whole index.

Closed-loop AI achieves certifiable engineering design

cs.AI ·2026-08-22 ·Tianyi Yu, Chengxing Tao, Haoxuan Shen, Huiyang Li, Rugang Chen +6 more
similarity 0.64
Abstract · 24 pages,3 figures

Agentic AI has automated parts of scientific discovery, including paper generation, expert-level coding, therapeutic proposal, and autonomous experimentation. Complex physical engineering design remains a gap, because candidates must satisfy simultaneous constraints in fluid dynamics, solid mechanics, and structural stability. We introduce The AI Engineer, an agentic framework that couples large language models (LLMs) to deterministic engineering backends in a closed loop: natural-language requirements are converted into design-domain geometry and mesh; topology is optimized with bi-directional evolutionary structural optimization (BESO) coupled to the CalculiX solver; and member sizes are refined with particle swarm optimization (PSO) coupled to Zwind under offshore aero-hydro-servo-elastic load cases. To explore many designs without per-candidate certification cost, an Automated Reviewer scores each candidate on five dimensions (capacity, steel intensity, unit cost, constructability, and fatigue life) using piecewise-linear functions calibrated on 11 real floating-wind projects. Search terminates only when a candidate reaches a composite score $S \ge 85$ (grade A) with no subscore below 60. We validated this gate by submitting the top-scoring design to the China Classification Society (CCS) for Approval in Principle (AIP), which it passed; AIP is thus an external check that the reviewer tracks professional judgment, not the daily objective. The certified design outperforms the human-optimized TuQiang baseline, reducing steel mass and unit capital cost by 8.1% each while meeting all AIP criteria. This verification-closed regime, in which every proposal is judged by deterministic physics and codified limit states, distinguishes The AI Engineer from open-ended generative systems. Remaining limits include detailed design and fabrication-hard constraints.

0.30

EvoX: Rethinking the Agent Harness as a Runtime Policy

cs.AI cs.SE ·2026-11-11 ·Haoyang Zhang, Qumeng Sun, Xiao Zhang, Xiang Liu, Zhidong Fan +1 more
similarity 0.62
Abstract · 15 pages, 5 figures. Technical report

Large language model (LLM) agents increasingly interact with tools and environments, yet plausible model decisions do not always translate into successful execution due to tool-call mismatches, interrupted workflows, and unsupported completion claims. We present EvoX, a Rust-based, multi-model agent runtime guided by The Second Policy, which views the harness as an Operational Policy complementing the foundation model's Semantic Policy. EvoX combines model-facing guidance with deterministic runtime control through three complementary mechanisms: Action Realization, Execution Continuity, and Outcome Grounding. To evaluate harnesses without suppressing their native behaviors, we introduce Contrast, a controlled and auditable framework integrating explicit fairness constraints, provider-bound request verification, and evidence-based adjudication. Across five benchmarks, six foundation models, and six agent harnesses, EvoX achieves the highest numerical success rate of 56.2% over 691 common task--model pairs, exceeding the average of the other five harnesses by approximately 3.0 percentage points. Its larger advantages on GLM-5.3 (+10.7 points) and Kimi K3 (+7.9 points) highlight the model-dependent effectiveness of harness design and the potential for cross-provider adaptability. Achieved without memory, evolution, or extensions, these results establish EvoX as a competitive multi-model agent runtime and underscore the importance of harness-level operational control in realizing foundation-model capabilities.

0.14

CAE-Bench: Benchmarking AI Agents for Reusable CAE Solver Development

cs.AI ·2026-11-16 ·Zhiyu Zhou, Tianyou Liu, Xinping Yang, Yiyao Liu, Jiayi Dong +6 more
benchmark similarity 0.62
Abstract · 18 pages, 6 figures, 8 tables. Zhiyu Zhou and Tianyou Liu contributed equally

We developed CAE-Bench, a benchmark to evaluate AI agents on Computer-Aided Engineering (CAE) solver development. A CAE solver is more than a PDE solver; it must be able to generalize across various inputs, such as different boundary conditions, geometries, and material properties. CAE-Bench evaluates the generalizability of AI-developed CAE solvers by providing the same task, such as a heat transfer problem, multiple cases, with each case specifying an input. The AI agent develops a solver for a fixed task using only a few public cases, and the resulting solver is then tested on held-out cases, i.e., cases it has never seen before. We evaluate 12 models across a range of reasoning settings on 80 computational tasks. Our experiments show that even if a solver developed by an AI agent performs well on the public cases, it may even get 0 score on held-out cases. For tasks such as fluid dynamics problems, even the solver developed by GPT-6 Astra performs poorly on held-out cases. A data format and an SDK for task registration are provided, so the researcher can use the benchmark on their own infrastructure. We hope that CAE-Bench will help the community to develop AI agents that can develop reusable CAE solvers that generalize to various inputs.

0.30

Instructions Are Evidence, Not Objectives: Measuring Outcome Alignment of Agents

cs.AI cs.SE ·2026-10-13 ·Kaiming Liu, Yuxuan Liu, Jinrui Ju, Minyuan Ruan, Xuanyu Lei +2 more
benchmark similarity 0.62
Abstract

Large language model agents can follow complex human instructions to solve real-world tasks. In practice, however, initial instructions are often incomplete. In our analysis of 100 user-agent trajectories from SWE-chat, 56\% of initial instructions omit requirements that later emerge as necessary, and 52\% of the useful follow-up requirements could have been inferred from the project. A user states requirements from their own understanding of the task, and these \textbf{stated requirements} often differ from the \textbf{true requirements} that completing the task imposes. An agent should therefore treat the instruction as evidence rather than as the objective, inferring the true requirements from the instruction and the environment and satisfying them even when the user is not yet aware of all of them. We call this ability \textbf{outcome alignment}. In this work, we construct \textbf{TiGanEval}, a benchmark of software engineering and research tasks. In every task the user genuinely lacks part of the requirements, each requirement stays discoverable from the code and runtime behaviour of the environment, and requirements the agent infers are separated from those the user adds after observing delivered work. These properties together make outcome alignment measurable. Evaluating eight frontier models including GPT-5.6-Sol, we find outcome alignment broadly missing: the models lose 53 to 67 points of success rate when moving from the full specification to the partial instruction, and consequence feedback across four submissions does not close the gap. Furthermore, a plan-mode harness cannot compensate for the missing ability of the model itself, which places outcome alignment among the abilities the next generation of models should be developed for.

0.18

RestoreBench: Can AI Agents Restore Power Flow Convergence?

cs.AI eess.SY ·2026-08-31 ·Riccardo Mansutti, Andrea Pomarico, Robert Jakob, Qian Zhang, Alberto Berizzi +1 more
benchmarkcode/data similarity 0.62
Abstract

Large Language Model (LLM) agents increasingly automate multi-step engineering workflows through tool use, interpretation of intermediate results, and iterative planning. Diagnosing and resolving non-convergent power flow cases is a promising yet largely unexplored application, as it requires engineering judgment, experimentation, and decision-making within constrained action spaces. We introduce a benchmark that evaluates these capabilities across multiple LLMs and three architectures: \emph{chatbot}, \emph{single agent}, and \emph{multi-agent} systems. The evaluation covers two power grids and 46 cases per grid, each requiring one or more corrective actions to restore convergence. The benchmark defines the simulation environment, observation and action spaces, and evaluation metrics, providing a reproducible foundation for developing agentic AI systems for power system planning and operation. The code is available at https://github.com/Mansutti081/RestoreBench

0.41

AgentSWE: Can Coding Agents Build the Agent You Actually Want?

cs.SE cs.AIcs.LG ·2026-10-09 ·Jiahao Wang, Hongjin Qian, Yuyang Hu, Jiajun Zhang, Zheng Liu
benchmarkcode/datacommunity pick similarity 0.61
Abstract · Code: https://github.com/VectorSpaceLab/AgentSWE

As the production of software passes into the hands of software itself, coding agents are increasingly commissioned to build agents fitted to their users' own workflows. This delegation carries a quiet assumption, that the delivered agent will faithfully serve the requirement it was built for, rather than merely appear to. No existing benchmark tests that assumption. We introduce AgentSWE, a benchmark for agent software engineering spanning three stages of the agent development lifecycle: Creation of a complete agent from a natural-language requirement, Editing of production agent codebases, and Optimization toward a measurable target. Each of its 25 tasks is framed as a commission rather than an exam: the builder iterates against a handful of illustrative cases, while acceptance exercises the frozen submission on held-out cases designed to span the full requirement, grading behavior against requirement-derived rubrics under hard pass/fail gates or, for Optimization, against the source benchmark's own objective. Evaluating a range of coding agents across models and harnesses, we find that none comes close to delivering what a requirement asks for: the gap between what a builder demonstrates and what it delivers is the norm, not the corner case. An accompanying empirical analysis of the failure trajectories identifies recurring failure modes, among them overfitting to the visible cases, hollow runtimes behind code that looks complete, and unsupported claims of completion, each a signal by which coding agents can learn to build the agents they are asked for.

0.32

When Agents Fail: Model or Harness--Who's to Blame?

cs.AI cs.CLcs.SE ·2026-10-23 ·Shao Zhang, Hangfan Zhang, Yuanyuan Shi, Hao Li, Min-Le Su +7 more
benchmarkposition similarity 0.61
Abstract · Preprint under review

LLM agents combine models with execution harnesses, so agentic benchmark performance reflects their joint behavior. We argue that harnesses should therefore be evaluated through their interactions with underlying models. We develop a framework combining five complementary measures: (i) Valid Completion Rate (VCR), how reliably agents finish normally and deliver evaluable results, irrespective of task correctness; (ii) Model-Harness Fit, how well a harness supports task achievement through valid completion for a given model; (iii) Cross-Model Fit, a harness's overall suitability across evaluated models; (iv) Interaction Residuals, pairing-specific execution strengths and weaknesses hidden by component-level summaries; and (v) Token Load, the token demands of agent execution, including failed attempts. We evaluate four general-purpose harnesses (OpenCode, Codex CLI, Pi CLI, and DeepAgents) with four core models, plus two fixed native model-harness systems, on six benchmarks covering context management, tool use, long-context planning, multimodal interaction, and artifact handoff. Including native references and stress conditions, 111 evaluation settings yield 52,168 trajectories. Harness rankings vary across models and benchmarks; task performance and valid completion can favor different pairings, and similar task scores can accompany distinct execution profiles. OpenCode ranks first in cross-model performance, while DeepSeek V4 Flash Preview maintains consistently high Mean VCR across harnesses on the shared four-benchmark panel. These findings support evaluating model-harness interactions, training transferable harness-use capabilities in models, and harness designs adapted to the model and task.

0.39

Harness Engineering for Predictable Agentic Systems: An Empirical Study of Deterministic Execution Constraints

cs.SE ·2026-08-25 ·Saransh Dhage
position similarity 0.61
Abstract · 9 pages, 3 tables

Large Language Model (LLM) based agents exhibit substantial run-to-run execution variance even when given identical tasks and tools -- acceptable for exploratory use but unacceptable in regulated domains such as finance and compliance. We study harness engineering: wrapping an agent in a deterministic execution layer (finite-state control, forced tool selection, output validation, bounded retry, and structured planning) and measuring its effect on execution determinism and task success. Across two synthetic tasks (finance and legal) and two open-weight models (Qwen-2.5-7B-Instruct, Gemma-3-27B), a first-pass harness produces a mixed result: it significantly improves reproducibility in one of four model-task cells, significantly degrades it in two, and has no effect in the fourth. A trace-level diagnostic finds the cause: once tool sequence, state sequence, and output are already highly consistent, an unconstrained free-text planning step becomes the dominant remaining source of variance. Adding Structured Planning -- validating the plan against a fixed schema before any tool is invoked -- eliminates the effect entirely: three of four cells reach a Reproducibility Rate and Determinism Index of 1.000 at N=100, and task success rises to 100% in three of four cells. The gain is not free: token cost falls in every cell, but latency shows a genuine, sample-size-robust split by model -- one becomes faster under the constraint, the other markedly slower. We argue harness engineering is a distinct, effective discipline for agent reliability, but its cost is model-dependent and must be measured, not assumed.

0.46