CS Paper Radar

PALIN: Pixel-Aligned LiDAR-NIR Multimodal 3D Object Detection with Benchmark

Yanan Zhang, Amit Vishnia, Chengbo Ai, Eleni Christofa, Runan Cheng, Siyuan Meng, Yuanchang Xie, Yu-Min, Yang

cs.CV ·submitted 2026-11-14 16:17 UTC · v1
benchmark

Abstract

3D object detection is critical for intelligent transportation systems. LiDAR has been widely adopted for accurate geometric measurements; however, purely geometric representations remain ambiguous under sparse observations and occlusions, while cross-sensor multimodal fusion suffers from calibration and synchronization errors. To overcome these challenges, we leverage an Ouster LiDAR to construct PALIN (Pixel-Aligned LiDAR-NIR), a large-scale intrinsically pixel-aligned multimodal dataset jointly capturing geometry and NIR intensity, comprising approximately 8,000 annotated frames from static urban intersections and diverse mobile suburban scenes. Building upon this dataset, we propose CMambaFusion, a novel fusion framework consisting of a four-directional Cross-Mamba module for bidirectional cross-modal interaction and a Gated Concat-Mamba module for joint feature refinement. Extensive experiments demonstrate that PALIN enables effective multimodal learning, and CMambaFusion achieves superior accuracy-efficiency trade-offs over both LiDAR-only and representative fusion baselines.

Comment
17 pages, including references and appendices

Closest papers

Nearest neighbours by meaning across the whole index.

FastBEVFusion: Simple Multi-Modal Fusion for 3D Object Detection at 50 FPS

cs.CV cs.RO ·2026-10-27 ·Tom Sanitz, Emre Gülsoylu, Simone Frintrop, Christian Wilms
published similarity 0.78
Abstract · Accepted at Iberian Robotics Conference (ROBOT2026)

Reliable real-time 3D object detection based on LiDAR and camera data is critical for safety in autonomous driving, where systems must accurately perceive their surroundings with minimal latency. Many state-of-the-art systems achieve high-quality detection results but fail to meet real-time constraints, limiting their practical use. To address this challenge, we propose FastBEVFusion, a simple, fast, and robust fusion system for 3D object detection. Based on modality-specific features, FastBEVFusion projects these features into semi-aligned modality-specific BEV spaces, without relying on a computationally intensive and potentially error-prone depth estimation. Given these BEV spaces, we propose a light-weight, soft, and dynamic fusion module based on cross-attention, which adapts dynamically to the scene context and enables feature fusion across the entire BEV spaces. Experiments on the complex nuScenes dataset show that FastBEVFusion outperforms state-of-the-art real-time systems, and achieves over 50 FPS without deployment libraries. Additionally, our system shows strong robustness to calibration errors, making FastBEVFusion a powerful 3D object detection system for real-world applications.

0.28

M3GD: Multi-Modal Multi-View Geometric Diffusion for Camera--LiDAR Novel View Synthesis

cs.RO cs.CV ·2026-09-24 ·Yang Zhou, Jiuhong Xiao, Shizhao Ye, Long Quang, Carlos Nieto-Granda +1 more
similarity 0.76
Abstract

Robotic novel view synthesis (NVS) must recover both visual appearance and metric 3D structure, yet most generative NVS methods rely only on images, overlooking LiDAR, a complementary sensor common on robotic platforms. We present M3GD, a Camera--LiDAR multimodal representation for generative NVS that composes independently pretrained 2D image and 3D point-cloud foundation models without separately pretraining a cross-modal translator. We show that, after camera projection, frozen LiDAR and image features exhibit substantial shared spatial structure, providing a natural cross-modal representation. M3GD conditions generation on LiDAR through this structure: it combines explicit geometry statistics with learned point-cloud descriptors into view-aligned packets on the image-latent grid, injected through a lightweight residual adapter into a multi-view flow-matching generator whose latent space, decoders, and training objective remain intact. On the GrandTour dataset, M3GD improves target-view RGB and depth synthesis over an image-only version of the same backbone. Ablations show that the gains come from pixel-aligned LiDAR content and that target-view LiDAR acts as a geometric query linking the requested view to source observations. Deployment on a ground robot demonstrates practical real-world operation, with a configurable quality--cost trade-off controlled by the number of Euler integration steps.

0.13

GeoUniPR: A Geometry-Consistent Unified Framework for Cross-Modal Place Recognition

cs.CV ·2026-08-10 ·Wonbong Kim, Jiatong Xiao, Rui Li, Xufei Wang, Qiwen Gu +3 more
similarity 0.75
Abstract · 17 pages, 10 figures

Cross-modal place recognition (CMPR) aims to identify the same location across heterogeneous sensing modalities, such as vision and LiDAR. Existing methods commonly bridge the modality gap using complex alignment modules, multi-stage training, or full fine-tuning of pretrained backbones. In this work, we revisit CMPR from the perspective of geometric consistency and propose GeoUniPR, a unified and concise geometry-consistent framework. GeoUniPR reduces cross-modal discrepancy at the representation level by projecting LiDAR point clouds into the camera perspective to construct Geometry-Consistent depth image views (DIV), which establish direct RGB-LiDAR correspondence. We further augment DIV with native LiDAR cues, including intensity and surface-normal information, yielding a multi-channel geometric representation that improves structural consistency. Based on this representation, GeoUniPR learns a unified embedding space using two modality-specific ViT-based encoders with identical architectures, trained through parameter-efficient adaptation without auxiliary alignment modules, multi-stage training, or full backbone fine-tuning. In addition, we introduce Spatially-Consistent InfoNCE (SC-InfoNCE), a CMPR-specific contrastive objective that suppresses distance-induced false negatives under spatial continuity. Extensive experiments on KITTI and KITTI-360 demonstrate that GeoUniPR achieves state-of-the-art (SOTA) performance in both same-modal and cross-modal place recognition, with strong cross-dataset generalization.

0.10

SARFusion: Scene-Aware Routing Fusion for Robust Camera-LiDAR 3D Object Detection

cs.CV cs.AI ·2026-09-24 ·Yuting Zhao, Ziyi Zheng, Shuxiao Li
similarity 0.75
Abstract

Camera-LiDAR fusion has become a prevailing paradigm for 3D object detection in autonomous driving. However, existing fusion detectors often establish strong inter-modality dependencies by decoding object queries from tightly coupled multimodal representations. Under corrupted driving conditions, such dependencies make the detector vulnerable to unreliable modalities, where degraded observations may interfere with reliable modality-specific evidence and lead to suboptimal predictions. Moreover, modality reliability can vary across both global driving scenes and individual object queries, requiring adaptive fusion decisions at a finer granularity. To bridge this gap, we reformulate robust camera-LiDAR fusion as a scene-aware branch routing problem and propose SARFusion, a robust 3D object detector. Instead of producing detections from a single fused representation, SARFusion decouples object-query decoding into three parallel reasoning branches: a camera branch, a LiDAR branch, and a camera-LiDAR fusion branch. Guided by a Scene Reliability Prior estimated from the global driving context, SARFusion further incorporates object-level evidence to route each query to the most suitable branch. This query-wise routing strategy alleviates harmful cross-modal interference while preserving the benefits of multimodal fusion when complementary cues are trustworthy. On the nuScenes test set, SARFusion achieves strong performance with 72.5 mAP and 74.4 NDS. Extensive analyses demonstrate its robustness under challenging conditions, including sensor corruptions and environmental changes.

0.15

Towards robust multimodal 3D object detection via visual foundation models

cs.CV cs.RO ·2026-09-20 ·Ziying Song, Lin Liu, Hongyu Pan, Shaoqing Xu, Lei Yang +2 more
similarity 0.74
Abstract · 27 pages, 5 figures. Bilingual English-Chinese manuscript; the complete English version appears first, followed by the complete Chinese vers…

Multimodal 3D object detection is fundamental to robust perception in autonomous driving because it integrates complementary information from LiDAR and camera sensors. However, existing methods often fail to maintain robustness under out-of-distribution (OOD) corruptions caused by sensor noise, adverse weather, and environmental changes. To address this problem, we propose RoboDistill, a robust and generalizable multimodal 3D object detection framework that leverages visual foundation models (VFMs), such as the Segment Anything Model (SAM). First, we introduce SAM-AD, a domain-specific pretraining strategy that fine-tunes SAM on autonomous-driving imagery to extract feature representations with rich semantic information. Second, we design the AD Feature Pyramid Network (AD-FPN) to refine and upsample SAM features at multiple scales for seamless fusion with LiDAR features. Third, we develop the Depth-Guided Wavelet Attention (DGWA) module, which suppresses high-frequency sensor noise while preserving critical contextual information. Finally, we introduce KD Fusion, in which the pretrained SAM-AD serves as a teacher that distills high-quality visual knowledge into a lightweight point-cloud network, thereby improving robustness under noisy conditions. Extensive experiments across 27 challenging OOD corruption settings show that RoboDistill generally delivers stronger or competitive detection performance and robustness relative to representative state-of-the-art methods. This work bridges the gap between VFMs and 3D object detection and advances robust multimodal perception for real-world autonomous-driving applications.

0.21

MatchFusion: Explicit-Implicit Instance Matching for Spatio-Temporal Multimodal Autonomous Driving

cs.CV cs.RO ·2026-09-22 ·Xiaoyu Li, Jiajia Fu, Long Shi, Tianyu Du, Ruihang Li +5 more
similarity 0.74
Abstract · 8 pages, 4 figures

Sparse instance representations provide a compact interface for spatial LiDAR-camera and temporal past-current interaction in multimodal perception and E2EAD. Effective interaction requires reliable instance correspondences despite geometric discrepancies and heterogeneous semantic representations. Attention-based methods exploit contextual semantics but often require specialized representation alignment, increasing computational overhead. In contrast, association based on structured object states is efficient and interpretable but lacks contextual evidence to resolve ambiguous matches. To combine these complementary strengths, we propose MatchFusion, a learnable instance matching and fusion module for spatio-temporal multimodal autonomous driving. MatchFusion initializes pairwise affinities using geometric similarity and category consistency, then selectively refines structurally plausible associations using instance embeddings. The resulting soft matchmap guides a common residual aggregation operator for adaptive information exchange. This unified matching-fusion formulation supports spatial LiDAR-camera and temporal past-current interaction, using multi-view image-plane geometry and motion-compensated BEV geometry as the respective structural priors. Experiments on nuScenes demonstrate consistent perception gains across diverse front-end configurations. Compared with a prior instance-centric fusion method, the MatchFusion-equipped system achieves higher perception accuracy while reducing FLOPs by 55.3% and GPU memory usage by 39.3%, with the matching-fusion module accounting for only 3.7% of total perception latency. Integrating temporal MatchFusion into SparseDrive further improves perception within an E2E framework without additional supervision. These results establish explicit-implicit matching as an effective and efficient mechanism for spatio-temporal instance interaction.

0.23

IndoorBEV: A Lightweight Real-Time LiDAR BEV Perception System for Indoor Mobile Robots

cs.RO ·2026-09-30 ·Haichuan Li
code/data similarity 0.74
Abstract

Efficient indoor LiDAR perception is challenging because mobile robots must understand cluttered three-dimensional environments under strict latency and memory constraints. Existing point-based and voxel-based methods often incur substantial computational overhead, whereas conventional bird's-eye-view (BEV) representations improve efficiency at the cost of discarding vertical geometric information. We present IndoorBEV, a lightweight LiDAR perception framework that mitigates this tradeoff through a height-aware BEV representation and geometry-conditioned feature fusion. IndoorBEV summarizes the vertical point distribution in each BEV cell using statistical height features and multi-frequency height encoding, allowing informative three-dimensional cues to be processed efficiently by two-dimensional convolutions. A lightweight encoder then integrates complementary geometric features with multi-scale local representations and compact global scene context. Decoupled dense prediction heads jointly produce semantic BEV maps and oriented object bounding boxes. IndoorBEV contains only 0.6M parameters and requires 2.3 MB of model storage. On an NVIDIA AGX Orin, it uses 21.52 MB of GPU memory per inference and achieves a mean latency of 169.6 ms under a 200 ms perception deadline, with a deadline miss ratio of 1.8\%. Evaluations on simulated scenes, real-world robot scans, and an open-source indoor point-cloud dataset demonstrate a favorable tradeoff among perception accuracy, latency, and memory consumption. These results indicate that explicitly encoding vertical geometry within a compact BEV representation provides an effective approach to resource-efficient indoor LiDAR perception.

0.24

DXPR: Depth-Based Vision-LiDAR Cross-Modal Place Recognition Using Vision Foundation Models

cs.CV ·2026-09-08 ·Yungsoo Han, Youngseok Jang, Seungwon Roh, Jeongyeon Seo, H. Jin Kim
similarity 0.74
Abstract · 8 pages, 6 figures, and 5 tables

We present DXPR, a depth-based cross-modal place recognition (CMPR) framework that uses vision foundation models (VFMs) to match monocular camera queries against a LiDAR map without modality-specific encoders. This enables robots and autonomous vehicles to robustly localize using only cameras within pre-built LiDAR maps, even under severe seasonal, weather, and illumination changes. The key idea is to convert both camera images and LiDAR scans into a unified depth image representation so that a single VFM backbone with an aggregation head can learn modality-invariant global descriptors. To make pairwise metric learning faithful to scene geometry, we introduce a geometry-aware overlap miner: after cross-modal scale alignment of camera and LiDAR depth, we forward-warp measurements between views to compute a pixel-level overlap score. This score relabels ambiguous pairs and adaptively modulates the positive margin in a multi-similarity loss to avoid overfitting on weakly overlapping views. Extensive experiments on KITTI odometry and Boreas demonstrate strong performance and robustness across seasons, weather, and day/night. On KITTI, DXPR achieves near-perfect Recall@1 on most sequences and outperforms prior CMPR baselines. On Boreas, DXPR achieves intra-sequence performance on par with a strong single-modal baseline (DINOv2-SALAD), while showing clear improvements in the more challenging inter-sequence setting. Compared with RangeBEV, our method consistently performs better in both intra- and inter-sequence evaluations, demonstrating robustness under diverse seasonal and illumination changes.

0.19