CS Paper Radar

DynLimit: A Simulation Benchmark for Dynamics-Critical Planning and Control

Yang Xiao, Yongzhi Liu, Sunan Zhang, Kang Wang, Guodong Yin, Weichao Zhuang

cs.RO ·submitted 2026-11-15 04:23 UTC · v1
benchmarkcode/data

Abstract

Experiments near vehicle handling limits must keep three questions apart: what a maneuver requests, what the closed-loop system executes, and whether the task is completed. We present DynLimit, a simulation platform that organizes this process end to end. Scenarios are composed from road, friction, obstacle, and reference objects; planners and controllers attach through a shared observation and control interface; a vehicle adapter runs either a license-free four-wheel model or an external dynamics solver; and synchronized records feed task evaluation, replay, and response inspection. The platform carries a task-oriented evaluation method that pairs a prescribed reference demand with a sampled passing set and event-aligned diagnosis. Across eight task families, three friction environments, and three reference-assisted baseline chains we executed 450 runs: 360 nominal, 18 locally refined, and 72 with prescribed initial offsets. Method differences depend on the task family, equal aggregate pass counts arise from different passing cells, and local refinement narrows two sampled transitions without locating a continuous boundary. Two case comparisons show why sideslip or tire-utilization peaks cannot replace task constraints. The three views therefore stay distinct in every reported run: an outcome can be traced from the prescribed demand, through the executed response, to the task rule that decided it. Code is available at https://github.com/Yang2581/dynlimit

Comment
8 pages

Closest papers

Nearest neighbours by meaning across the whole index.

SceneFactory-3D: Lifting 2D Traffic Scenes into 3D Physical Counterfactuals for Scalable Physically Grounded Safety Evaluation

cs.RO cs.MA ·2026-10-02 ·Yicheng Zhu, Linfeng Tian, Tianmu Zhao, Yang Chen, Fan Zuo +2 more
code/data similarity 0.65
Abstract

Scalable driving simulators typically execute vehicle commands using prescribed behavioral or kinematic rules, overlooking the physics of tire-road interfaces, thereby limiting their ability to capture how adverse road and environmental conditions alter vehicle execution and propagate through traffic. To address this limitation, we present SceneFactory-3D, a GPU-batched, physics-grounded multi-agent driving simulator. Vehicles execute acceleration and steering commands via suspension- and friction-limited forces evaluated at each wheel-contact point. Spatially varying friction, per-world 3D heightfields, gravity, and rigid contact consistently govern wheel motion and chassis collisions. Per-world terrain isolation and GPU batching enable SceneFactory-3D to run matched physical counterfactuals in parallel: traffic scenario setup and vehicle controllers remain fixed while only the road condition changes, enabling the resulting closed-loop effects to be evaluated across parallel worlds. To demonstrate the advantage of the SceneFactory-3D-enabled counterfactual evaluation, we conduct an empirical study on vehicle controllers' sensitivity to road conditions. We study three learned-policy families on 1,024 matched 12-vehicle worlds per condition, and two classical planners on a shared 32-world subset, across 21 friction and grade conditions. When friction drops from 1.0 to 0.18, the share of vehicles that clear the work zone safely falls by 6 to 90 percentage points across learned policies (18-19 for classical planners), and near-collision situations become more frequent for every learned policy. Code: https://github.com/SmallWorldLab/SceneFactory_3D

0.32

Driving Context-guided Model Predictive Planning and Control for Autonomous Car Racing at the Limit and Beyond

cs.RO eess.SY ·2026-09-11 ·Ayoub Raji, Federico Sacco, Nicola Musiu, Marko Bertogna
published similarity 0.65
Abstract · Accepted to IEEE/RSJ International Conference on Intelligent Robots & Systems - IROS 2026

This paper presents a Model Predictive Control-based motion planning and control pipeline for autonomous car racing capable of adapting to different driving contexts, such as overtaking, nominal driving, and countersteering. A Cost Blending state machine manages the identification of different driving contexts and the selection of their predefined weights to be applied to the Model Predictive Planning (MPP) and Control (MPC) modules. The two optimization-based solutions share the same problem formulation and model, differing only in horizon length, rate, tuning, and in their open-loop versus closed-loop approach to maximize the effectiveness of their interaction. The work is validated on the fully autonomous open-wheel racecar Superformula EAV-25, with a lap time achieved that is within 2% of the best human driver reference. The results demonstrate the capability of the solution in driving at the limit of handling, smoothly executing overtaking maneuvers, and quickly reacting to high oversteering conditions to recover the vehicle stability.

0.31

LLM-Guided Heuristic Design from Simulation Traces: A Case Study in Dynamic Production and AGV Scheduling

cs.AI ·2026-08-10 ·Jinbo Li, Chuanhao Li
similarity 0.65
Abstract · 33 pages, 8 figures

Simulation-based optimization (SBO) evaluates executable policies under stochastic dynamics, but most methods treat the simulator as a black box: aggregate scores rank candidates without revealing why they fail or which policy logic should change. We present an LLM-guided heuristic design framework that uses repeated simulation for selection and event-level traces for diagnosis. Each incumbent is assessed through multiple replications, while replaying its lowest-scoring one produces a queryable trace. A manager agent formulates bottleneck hypotheses from this evidence, and editing agents implement parallel code-level revisions. After execution checks and repeated evaluation, best-so-far selection retains only improvements. LLM revision occurs between evaluation batches, while a fixed policy controls each simulation run. We evaluate the framework in a discrete-event simulation of dynamic production and automated guided vehicle (AGV) scheduling. Across five independent optimization runs with Gemini-3.1-Pro, final mean scores averaged 77.51 on the simulator's 0-100 scale. In the highest-scoring run, trace-based diagnoses motivated proactive charging, distance-aware AGV assignment, and rebalanced dispatch priorities, raising the best-so-far mean score from 62.49 to 78.61. On 100 matched seeds, the best final policy outscored representative rolling-MILP, rule-based, and metaheuristic policies on every seed and retained its advantage under random faults without re-optimization. After separate re-optimization for a longer horizon and variable order interarrival times, the resulting policies again outscored all baselines. Ablations with two LLM backbones showed that removing either parallel candidate generation or trace-database access reduced final mean scores. These results show that simulation traces can guide targeted code-level policy improvement in complex simulation-based scheduling.

0.40

Control-Informed Constraint Adaptation in Minimum-Time Trajectory Planning for Autonomous Racing

cs.RO ·2026-08-14 ·Ann-Kathrin Schwehn, Alexander Langmann, Mattia Piccinini, Johannes Betz
published similarity 0.64
Abstract · Accepted at IEEE ITSC 2026

Autonomous racecars operate at the limits of vehicle dynamics, where small control errors translate into safety-critical behavior and lost performance. Trajectory planners assume perfect tracking and remain blind to execution errors. To guarantee safety, trajectory planners therefore restrict themselves to conservative spatial margins, leaving usable track space untapped. To overcome these issues, we introduce a control-informed online trajectory planning framework that learns from its own execution errors. By measuring systematic tracking deviations during runtime, we dynamically adapt spatial track constraints and iteratively expand the free-space planning area. The planner remains time-optimal while compensating for accumulated execution errors. This method was analyzed in a high-fidelity closed-loop simulation environment with autonomous racecars. The results demonstrate that our approach reduces lap time by 1.8\,s without increasing computational burden, maintaining a median runtime of 25 ms. Our finding indicates that feeding control-induced deviations back into the planning layer unlocks performance previously inaccessible to modular architectures and enables autonomous vehicles to exploit track limits systematically.

0.19

One Diffusion Model, Two Roles: Guided Trajectory Planning and Safety-Critical Scenario Generation in Closed-Loop Simulation

cs.CV cs.AIcs.LGcs.RO ·2026-09-04 ·Arka Pal, Rajesh Kumar, Hannes Eriksson, Rémi Lacombe, Arvid Laveno Ling +2 more
publishedbenchmark similarity 0.64
Abstract · Accepted at ECCV 2026 workshop. Arka and Rajesh have equal contribution

Diffusion probabilistic models can capture the multi-modal, interaction-rich distribution of joint future trajectories in driving scenes. We show that a single pretrained diffusion traffic model can serve two complementary roles in the autonomous driving development loop: as an ego motion planner, and as a controllable generator of safety-critical scenarios for stress-testing the planners. On the planning side, we introduce a Single-Stream Dual-Stream (SSDS) diffusion-transformer decoder that fuses scene context via joint attention rather than late cross-attention, improving closed-loop performance on nuPlan. We further propose Decoupled Annealing Posterior Sampling with Energy (DAPSE), a training-free guidance scheme that injects arbitrary energy functions at the clean-sample level, avoiding the first-order approximation errors while requiring no auxiliary networks. Beyond planning, we leverage the same diffusion model as a controllable scenario generator to create realistic long-tail driving interactions for closed-loop evaluation. Through inference-time guidance, selected agents are steered toward safety-critical behaviors, including aggressive cut-ins, lead-vehicle braking, and combined longitudinal-lateral interactions, while preserving realistic traffic behaviors. Evaluated in closed-loop nuPlan simulations with independent black-box planners, the generated scenarios expose failure modes that remain hidden under standard benchmarks. Although the SSDS-based planner achieves stronger nominal performance, it experiences larger degradation under these challenging scenarios, demonstrating that benchmark superiority does not necessarily translate to robustness. These results demonstrate that a single learned traffic prior can simultaneously improve motion planning and provide a realistic framework for systematic planner robustness evaluation.

0.21

Guiding End-to-End Driving Models with Endpoint-Constrained Trajectory Optimization

cs.RO cs.AIcs.CVcs.LG ·2026-09-25 ·Brayden Zhang, Mahsa Golchoubian, Igor Gilitschenski, Boris Ivanovic, Kashyap Chitta
similarity 0.63
Abstract

End-to-end driving policies are commonly trained through open-loop behavior cloning, yet they must ultimately operate in closed-loop when deployed on a vehicle, creating a fundamental mismatch between training and execution. Beyond the commonly studied effects of covariate shift and causal confusion, we identify a complementary factor for this open-loop/closed-loop gap: waypoint-based supervision and displacement metrics do not ensure that the intermediate trajectory is physically coherent or easy for the controller to track. We observe that these inconsistencies concentrate primarily at intermediate waypoints, while the predicted endpoint remains comparatively reliable. Based on this observation, we introduce Endpoint-Constrained Optimization (ECO), a lightweight postprocessing layer that anchors the trajectory to the vehicle's executed history, preserves the policy's predicted endpoint, and reshapes the intermediate waypoints to improve feasibility. ECO requires no map, privileged simulator state, or additional training, and can be inserted between a broad range of waypoint-emitting policies and their controllers. Across two closed-loop simulators, it improves the aggregate closed-loop score of all six evaluated generative and regression-based driving policies, and the gains tend to increase with how often the base plans violate motion limits. On HUGSIM, ECO improves VaVAM from 18.1 to 31.0 HD-Score (+71%), achieving 1st place on the HUGSIM Closed-Loop Driving Challenge. Similarly, on AlpaSim, ECO increases the scene scores of VaVAM and DiffusionDrive by 123% and 22%, respectively. These results show that for a broad collection of end-to-end driving models, repairing the intermediate geometry of predicted trajectories without changing the policy's predicted endpoint can substantially improve closed-loop performance.

0.17

Closed-Loop Refinement and Execution for Learned Driving Planners

eess.SY cs.RO ·2026-10-01 ·Huaijin Hu, Shanting Wang, Zhongyu Mo, Andreas A. Malikopoulos
similarity 0.63
Abstract · 8 pages, 6 figures, 3 tables. Submitted to the 2027 American Control Conference (ACC 2027)

Learning-based driving planners are usually trained and evaluated in open loop against logged trajectories. In closed loop, a trajectory with small displacement error can still stall the vehicle, steer it into a conflict with surrounding agents, or be executed with abrupt braking. We introduce Closed-Loop Refinement and Execution (CLRE), a hierarchical receding-horizon control framework designed to mitigate these failure modes while leaving the upstream planner frozen and adding no new learned model. The upper layer treats the nominal trajectory as a reference and solves a finite-horizon optimal control problem that trades route progress against interaction with predicted agents. Solving it from several initializations gives a candidate set, and a prediction-conditioned oriented-bounding-box (OBB) feasibility test retains only candidates whose minimum predicted OBB clearance over the horizon meets a threshold. The lower layer executes the lowest-cost survivor, or a route-centerline backup when none remains, through the tracking controller supplied with the planner, augmented by a range-based speed bound and a saturated proportional braking law. In closed-loop simulation on the 220-route Bench2Drive validation set with VAD as the upstream planner, CLRE raises the driving score from 42.26 to 55.89 and route completion from 55.69 to 71.51, and reduces collision events from 117 to 97.

0.23

WTR-Drive: World-Task Decomposition with Structured Risk Supervision for End-to-End Driving

cs.RO ·2026-11-16 ·Haoyu Xing, Shaobing Ding, Guanglei Zhao, Guanhua Zhao, Nawu Peng +1 more
similarity 0.63
Abstract · 8 pages, 5 figures, 3 tables. Submitted to IEEE Intelligent Vehicles Symposium (IV) 2027

Proposal-conditioned scene predictions can lack a common object-level reference across candidate trajectories. Aggregate planning scores also leave the objects and times associated with violations implicit. We present WTR-Drive (World-Task-Risk Driving), a Drive-JEPA-based planner that separates shared scene estimation from proposal-conditioned reasoning. A proposal-independent World Memory estimates object states, map structure, and future motion by re-reading the original visual features at each refinement round. Proposal feedback updates a residual Task branch without writing back to World Memory. This branch guides refinement through candidate-specific retrieval and gated visual feedback. A final Task readout supplies candidate-conditioned features for scoring. We derive structured risk targets from existing candidate-scoring rollouts without additional simulator calls. For at-fault collision and time-to-collision violations, the targets encode event existence, association with shared object slots, and the first violation time bin. On the NAVSIM navtest split, WTR-Drive achieves 94.66 PDMS on v1 and 88.24 EPDMS on v2 (expert-frame sequential evaluation). These scores are 0.96 and 0.44 points above the published Drive-JEPA values, respectively. Candidate-level analysis shows that higher best-candidate scores can coexist with lower selected-trajectory scores, revealing a gap between candidate quality and selection effectiveness.

0.26