CS Paper Radar

Model-Free Stealthy Attack on Vehicle Systems and Its Implications for ISO/SAE 21434 Risk Assessment

Qazi Mairaj ud din, Qadeer Ahmed

eess.SY ·submitted 2026-11-15 22:49 UTC · v1
benchmark

Abstract

This paper investigates a model-free stealthy adversary targeting in-vehicle networks and its implications for automotive cybersecurity risk assessment. Conventional stealthy false-data-injection (FDI) attacks often assume privileged knowledge of system dynamics, estimator parameters, or detector statistics, understating the feasibility of adversaries with limited system information. We develop a model-free FDI attack that uses a Vector Autoregressive model with Exogenous inputs (VARX), identified from passively recorded nominal measurements, to characterize a compromised channel and construct attack sequences within a data-calibrated residual envelope. The construction requires no vehicle dynamics model, estimator parameters, assumed noise distribution, or detector knowledge. In a closed-loop lane-keeping benchmark, the attack induces a 1.25 m lateral displacement, exceeding the specified 0.9 m half-lane width, and keeps the vehicle outside the lane corridor for 9.21 s. At a matched 1 % false-alarm operating point, attack-period alarm rates stay below 2.4 % across five learning-based intrusion detection systems (IDSs), a chi-squared residual monitor, and a liveness monitor, versus 66-100 % for conventional baselines. The proposed adversary matches the impact and evasion of a privileged model-based adversary while requiring 13 fewer attack-potential points, raising its assessed feasibility from Low to High under the considered ISO/SAE 21434 Threat Analysis and Risk Assessment (TARA). We further show that conventional impact-and-feasibility risk scoring can assign identical risk to attacks with substantially different detector responses, and introduce a detection-conditioned risk formulation to distinguish them. These findings highlight the importance of accounting for adversarial knowledge requirements and measured detectability when assessing risks in safety-critical vehicle systems.

Closest papers

Nearest neighbours by meaning across the whole index.

Model-Free Generative Stealthy Attacks on Safety-Critical Vehicle Cyber-Physical Systems

eess.SY ·2026-10-22 ·Qazi Mairaj ud din, Sidra Ghayour Bhatti, Qadeer Ahmed
similarity 0.82
Abstract

Existing stealthy attacks presuppose white- or grey-box access to the target system, unrealistic in practice. This paper develops a model-free stealthy attack framework that learns an attack policy directly from nominal measurement data, without knowledge of the system dynamics, estimator, or detector. We establish a certified residual-impact bound and an observable stealth budget around a stealth-consistent anchor, and show that recurrence and context conditioning are structural necessities for closed-loop, multivariate cyber-physical systems (CPS). The resulting attack generator, trained against a Wasserstein critic under a stealth-constrained impact objective, induces a hazardous 2.51 m lane departure while evading five intrusion detection systems, and, in real-time hardware-in-the-loop tests, a speed deviation of approximately 8 km/h while staying below the detection threshold. Results show that safety-critical CPS remain exposed without attacker access to privileged information, motivating offense-informed defenses.

0.28

Deep Defence on Wheels: A Dual Intrusion Detection System Architecture for Comprehensive In-Vehicle Network Security

cs.CR cs.ARcs.LG ·2026-10-05 ·Shashwat Khandelwal, Shanker Shreejith
top venue similarity 0.66
Abstract · 30 pages, 9 figures, 11 tables, ACM Transactions on Embedded Computing Systems

Increasing connectivity to the outside world and the lack of inbuilt security mechanisms have made legacy intra-vehicular networks vulnerable to cyberattacks. Initial research focused on maximising detection accuracy for known and unknown attacks, often using large, full-precision machine learning models. However, embedding IDSs into vehicular electronic systems also requires low detection latency, energy efficiency and minimal electronic control unit (ECU) resource overhead to process about 2,000 CAN frames/s. Lightweight models must balance accuracy with these deployment constraints. We propose a dual IDS framework comprising supervised and unsupervised learning-based solutions, each optimised for real-time, resource-constrained automotive platforms. A quantised LSTM-based IDS (QLSTM-IDS) achieves over 99.9% detection accuracy for DoS/Flooding, Fuzzing and Spoofing/Malfunction attacks using a single model architecture evaluated on two widely used datasets. The model is trained using the Brevitas quantisation-aware training library, transformed into a dataflow accelerator with custom blocks compatible with AMD's FINN toolchain, and synthesised using Vitis HLS. Complementing this, an 8-bit quantised convolutional autoencoder-based IDS (QCAE-IDS), quantised using AMD's Vitis-AI toolchain, detects previously unseen anomalies that alter CAN-ID sequence patterns with over 99% accuracy. An integration architecture enables both models to operate on a single FPGA, bridging the network interface IP and processing system to minimise software overhead. QLSTM-IDS achieves 0.25 ms inference latency and 0.8 mJ energy consumption per message, while QCAE-IDS achieves 0.42 ms and 1.1 mJ per block. Both solutions are deployed and evaluated on the ZCU104 SoC (XCZU7EV FPGA), demonstrating a flexible hardware/software co-design for real-time detection of known and unknown attacks on high-speed CAN buses.

0.35

SPADE: SPaT Attack Detection from the Connected Vehicle's Perspective

cs.CR cs.LG ·2026-09-02 ·James Di Novo, Hany Ragab, Sylvain P. Leblanc
code/data similarity 0.65
Abstract · 7 pages, 3 figures, 3 tables

Signal Phase and Timing (SPaT) messages are a cornerstone of connected vehicle (CV) safety, enabling CVs to perceive and respond to intersection state through Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) communication. The integrity of these messages is threatened by a range of application-layer attacks that can bypass conventional authentication when a roadside unit or peer vehicle is compromised. Existing intrusion detection research either defends the infrastructure side or targets V2V Basic Safety Message (BSM) / Cooperative Awareness Message (CAM) misbehavior, leaving the onboard CV perspective on SPaT integrity unaddressed. To close this gap, we introduce SPADE --- the SPaT Attack Detection and Evaluation dataset --- a labelled, multi-modal, simulation-based dataset designed specifically for deep learning IDS research in this space. SPADE is generated through Eclipse MOSAIC using runtime attack injection at the SAE J2735 application layer across six attack classes and one benign class. By combining four intersection geometries, six operating conditions, and five independent random-seed repetitions, SPADE comprises 180 unique base scenario runs, yielding $\sim$1,890,000 labelled timestep records (270,000 per class). Each record fuses SPaT message fields, onboard camera confidence scores, and cooperative V2V peer data across 40 features, reflecting the multi-modal signal space required to distinguish deliberate attacks from environmental degradation. The dataset, generation code, and scenario configurations are released publicly to support reproducible and comparative IDS research in C-V2X security. The developed toolbox, instructions, and dataset link are publicly available on GitHub: https://github.com/jdinovo/SPADE.

0.36

Covert System Identification Under Timing Constraints: A Static Linear Model and Its Detectability Implications

eess.SY cs.CR ·2026-11-09 ·Victor Mattos, Guilherme Sobreira, Amit Bhaya, Alan Oliveira de Sá, Charles B. Prado +3 more
published similarity 0.63
Abstract · Presented at the 27th International Symposium on Measurement and Control in Robotics (ISMCR 2026), Rio de Janeiro, Brazil. Proceedings forth…

This paper studies covert system identification in cyber-physical systems, where an attacker infers plant dynamics while attempting to remain stealthy. We introduce a lightweight static linear model in which the time to execute a setpoint change is proportional to the commanded speed difference. On a Siemens PROFINET testbed this gain captures the drive's ramp response accurately but not its terminal overshoot. That omitted transient becomes the attacker's main exposure: on real traces, the residual left by the linear masking procedure is detected by two anomaly monitors, Process-Aware Stealthy-Attack Detection (PASAD) and the CUSUM change detector. Across the cascade identification and staircase attack strategies defined in the paper, the stealth boundary relates to the plant's own settling transients, a structural limit for this class of models under the adopted detector-calibration regime. Comparison against dynamic models obtained by N4SID, trained at multiple excitation amplitudes, shows that the evaluated N4SID models do not improve stealth over the structure-informed ramp model. Since per-cycle computation is negligible for both procedures, the binding trade-off is not inference cost but whether the attacker can acquire and refresh a model without injecting detectable perturbations.

0.37

Zonotope-Based Active Exposure of Stealthy Deception Attacks in Sensor-Fusion Systems

eess.SY ·2026-09-02 ·Meiqi Tian, Shuo Li, Bingzhuo Zhong
similarity 0.63
Abstract

This paper investigates the stealthy attack detection for sensor-fusion cyber-physical systems with unknown-but-bounded noises through the control channel. The detection framework is particularly applicable to sensor-fusion scenarios in which multiple suspicious sensors contributing to the fused estimate may be compromised simultaneously. First, we construct an admissible output set using secure sensors and an attack output set for each attack hypothesis. Then, we introduce a receding-horizon optimization framework to design exposure inputs, namely bounded auxiliary control perturbations injected through the control channel, so as to enlarge the separation between the admissible output set and the attack output sets according to the separation tendency. A sufficient detection condition is further derived, showing that set separation guarantees detectability of the compromised sensors. Moreover, an offline exposure budget guidance is developed to support budget selection before online exposure starts. Simulations on a UAV navigation system under stealthy GNSS and LiDAR attacks validate the proposed method.

0.20

Attack Injection to Vehicle Reactions: Extensible Closed-Loop Adversarial Evaluation Framework

cs.CR cs.NI ·2026-11-08 ·Mohamed Gaber, Tahsin Wahid, Mohammad Mamun, Salimur Choudhury
similarity 0.63
Abstract · 6 pages, 3 figures, 5 tables

Autonomous vehicles can use information exchanged with other vehicles and roadside infrastructure to support driving decisions. However, applications that rely on this information can make unsafe decisions when it is falsified. Studying the resulting traffic effects requires following received information through application decisions, vehicle reactions, and subsequent interactions. We present an extensible closed-loop adversarial evaluation framework built on VaN3Twin, a platform for traffic and wireless network simulation, with a diverse attack library and a labelled dataset covering benign and attack conditions. A key advantage of the framework is that it can be extended with additional attacks, message paths, receiving applications, and logging fields. The added library contains 76 configurable attack profiles adapted to message formats defined by the European Telecommunications Standards Institute. These profiles are organized into nine groups of related attacks, referred to as suites. The framework connects live attack injection and simulated network delivery to receiving applications, whose selected commands update vehicle movement. The resulting state feeds subsequent message generation, closing the loop. The dataset links physical vehicle states and message exchanges to attack labels, application decisions, selected commands, and traffic outcomes. Evaluation with individual and combined attack suites confirmed execution of all profiles, and every suite produced requests linked to attacked messages. A recorded sequence also showed a vehicle reacting to an attacked message and subsequently influencing another vehicle through an unmodified message describing its updated movement. These findings demonstrate how live injection and vehicle feedback support the study of direct and indirect effects as traffic evolves.

0.11

Digital Twin-Based Intrusion Detection for Vehicle Powertrain CAN Bus Systems

cs.CR cs.LG ·2026-08-17 ·Araf Rahman, M Sabbir Salek, Mashrur Chowdhury
similarity 0.63
Abstract · 20 pages, 4 figures Paper submitted for presentation at the Transportation Research Board Annual Meeting and publication in Transportation R…

Existing automotive intrusion detection systems (IDSs) for the Controller Area Network (CAN) largely target discrepancies in message timing, frequency, or sequencing and cannot detect attacks that preserve these properties while manipulating the payload. Digital twins (DTs) have been used to emulate CAN traffic and generate attack scenarios for IDS evaluation, but their use for intrusion detection remains unexplored. This study develops a DT-based IDS that jointly models physical relationships among decoded powertrain signals and identifies attacks through residuals between predicted and observed behavior. A shared-encoder LSTM DT was trained on 17 decoded signals from a real Hyundai/Kia CAN log to jointly predict seven numeric and two categorical gear signals over a 24-step window. A timestep is flagged when a residual exceeds a calibrated threshold, while adaptive rollout protects the twin's input history from sustained contamination. Four attacks (plateau, continuous drift, masquerade, and gear masquerade) were evaluated against the twin and a range-and-plausibility baseline. The DT outperformed the baseline across all attacks, achieving detection rates of 94.6% for continuous drift and 89.2% for masquerade, while the baseline detected almost none of the fabricated payload attacks. These results demonstrate that learning coupled vehicle dynamics enables detection of stealthy payload manipulations that preserve normal CAN communication patterns. False positive rates reached 39.6%, highlighting the need for improved robustness under sustained attacks. The DT-based IDS shows promise for detecting stealthy payload-level CAN attacks that preserve normal communication patterns, supporting behavior-based cybersecurity for connected and automated vehicles.

0.35

A Minimally Informed Black-Box Fake-Report Attack on DRL Traffic-Signal Control

cs.CR ·2026-10-28 ·Amro Saleh, Loukas Lazos, Mohammad J. Abdel-Rahman
similarity 0.63
Abstract · 7 pages, 3 figures, 5 tables. Submitted to IEEE VTC2027-Spring (under review)

Deep reinforcement learning (DRL) traffic-signal controllers may use vehicle-to-infrastructure (V2I) reports, exposing their perception layer to false-data injection. Existing demonstrations typically assume either white-box access to the controller's weights or full observability of the traffic state. We study the impact of a weaker and more realistic adversary who has no access to the RL model and whose traffic observations are limited to her own approach. This black-box, minimally informed attacker trains an imitation surrogate of the controller. She then crafts bounded fake reports, restricted to inflating vehicle counts on her own approach, that transfer to the real controller. We demonstrate that despite the loss of accuracy relative to an attacker who can observe the entire state and action space, this limited attacker can significantly increase the average waiting time for other approaches while barely changing the waiting time on her own approach, i.e. externalizing the added delay onto the other approaches. Because the only realizable move is to inflate one's own reported queue, we find that a zero-knowledge attacker that simply reports the maximum feasible queue is as damaging as the surrogate-based one, while an unstructured random inflation is not: the surrogate is not required to reproduce the degradation, and the exposed vulnerability is the V2I sensing channel itself. The surrogate's role is directional control, selecting a disruptive or a selfish objective at the same budget. The attack persists under +/-20% uniform demand variation. Finally, on a common per-lane budget we place the attacker on a knowledge ladder against white-box adversaries, and find the black-box surrogate matches a realizable white-box attacker that uses the victim's own gradients; only abandoning realizability raises the damage further.

0.16