CS Paper Radar

sqrtVINS-Based 360 Visual-Inertial SLAM Systems: Hilti-Trimble SLAM Challenge 2026 Entry

Jungwoo Lee, Hogyun Kim, Jiwon Choi, Jinyong Jeong, Younggun Cho

cs.RO ·submitted 2026-11-16 05:50 UTC · v1
published

Abstract

This report describes our submission to the 2026 Hilti-Trimble SLAM Challenge. The system is a 360-camera visual-inertial pipeline that uses only the provided dual-fisheye image streams and IMU measurements. First, raw images are preprocessed with low-light enhancement and static/dynamic masking, and then fed into a $\sqrt{\text{VINS}}$ frontend as the local odometry, with deep learning-based SuperPoint features, ELSED line segments, and LightGlue matching. The resulting trajectory is refined using a GTSAM-based backend that performs tightly-coupled factor graph optimization with SALAD global descriptor and visual bundle adjustment (BA). The backend performs local-to-global structureless BA, tightly regularized intrinsic and extrinsic refinement, and global scale adjustment supported by the known inter-camera baseline and cross-view constraints. The design targets long indoor sequences with dark regions, repetitive corridors, dynamic objects, and limited geometric parallax, while keeping the pipeline reproducible in the provided ROS2 workspace. Fig. 1 demonstrates that our proposed method aligns well with the floorplan across several indoor sequences.

Comment
2026 Hilti x Trimble SLAM Challenge at ICRA 2026 (2nd Place in the SLAM Category)

Closest papers

Nearest neighbours by meaning across the whole index.

FoundationVIO: Enforcing Metric Scale in Feed-forward Visual-Inertial Odometry

cs.RO ·2026-10-10 ·Jin Rhee, Yuhao Zhang, Frank Dellaert, Maurice Fallon
code/data similarity 0.71
Abstract

Feed-forward geometric foundation models (GFMs) directly predict dense geometry and camera poses from batches of images. Emerging visual SLAM methods chain together consecutive GFM batches to form dense point cloud maps. A core challenge is how to address the ambiguous geometric scale of GFM predictions: independent predictions are locally consistent up-to-scale but not constrained by any direct physical measurements. Models trained on data with known scale improve the consistency of GFM reconstructions but again do not directly measure it. Consequently, trajectories and 3D reconstructions from GFM-enabled SLAM methods inherit this issue. Motivated by parallels with classical visual-inertial odometry, we introduce FoundationVIO which integrates inertial sensing with GFM predictions to recover metric scale reconstruction using a factor-graph based approach. We demonstrate odometry estimates competitive with classical state-of-the-art VIO methods and accurate dense reconstructions that outperform GFM-enabled SLAM methods. We also add a minimal GFM-based loop-closure mechanism to create a full Visual-Inertial SLAM system capable of creating globally accurate reconstructions and pose estimates. We evaluate our method on three datasets with well known sensor systems and demonstrate its compatibility on ubiquitous camera and IMU sensors. The method runs at approximately real-time on a consumer-grade laptop GPU. Code: https://github.com/ori-drs/FoundationVIO.

0.28

DASH-SLAM: Calibration-Free Metric Monocular SLAM via Depth Scale Propagation

cs.RO ·2026-11-06 ·Otavio Ribas, Jacopo Panerati, Pierre-Yves Lajoie
similarity 0.71
Abstract

Geometric foundation models estimate dense geometry and camera parameters from monocular images, but reliable SLAM also requires consistent scale and accurate data association across successive reconstructions. We present DASH-SLAM, a monocular SLAM system that integrates metric depth predictions from pretrained Depth Anything 3 into a shared-keyframe pose graph without task-specific fine-tuning. DASH-SLAM derives scale corrections from depth ratios at shared anchor images and accumulates them across reconstructions, with a damping factor controlling their influence. These corrections rescale odometry translations, loop constraints, and map geometry. Experiments on TUM, Replica, and 7-Scenes show that DASH-SLAM outperforms state-of-the-art methods. We evaluate performance using both rigid and similarity alignment to distinguish metric-scale fidelity from accuracy up to scale. We further evaluate DASH-SLAM on four challenging sequences in perceptually-degraded environments from the Unified Autonomy Stack field dataset, covering tunnels, fog, and a frozen lake. On these sequences, DASH-SLAM outperforms the foundation-model SLAM state-of-the-art and maintains tracking where classical SLAM methods fail.

0.21

RootSLAM: Square Root Bundle Adjustment for Visual-Inertial SLAM

cs.RO cs.CV ·2026-10-10 ·Tomás Santucci, Mateo de Mayo, Daniel Cremers, Taihú Pire
benchmark similarity 0.70
Abstract

Efficient perception is a prerequisite for the small, low-power devices targeted by robotics, mixed reality, autonomous driving, and drone applications, all of which rely on Simultaneous Localization and Mapping (SLAM) to estimate their motion within their surroundings. Learning-based SLAM systems achieve state-of-the-art accuracy but are demanding in compute, whereas classical geometry-based methods retain a strong efficiency advantage with little to no loss in accuracy. In this work we present RootSLAM, a fully-featured visual-inertial SLAM system for multi-camera setups built on Basalt. RootSLAM achieves accuracy competitive with the state of the art while running up to 20 times faster, facilitating the deployment of perception systems in resource constrained environments. We adapt the square-root bundle adjustment formulation from structure from motion into the multi-camera visual-inertial SLAM setting through a novel reformulation that leverages the system's pose-graph, letting the global optimizer run in single-precision floating point, thus doubling its performance. We provide a thorough benchmark against the state of the art together with an ablation study of our contributions. Our new implementation, including its map management and loop detection module, pose-graph optimizer, and global mapping components, will be open-sourced.

0.21

DAVIO: Dense Monocular-Inertial SLAM with Feed-Forward Initialization and Pose-Conditioned Mapping

cs.RO cs.CV ·2026-09-23 ·Jaafar Mahmoud, Arthur Movsesyan, Mikhail Iumanov, Sergey Kolyubin
similarity 0.70
Abstract

A camera and an IMU are the minimal sensor setup for metric localization and dense mapping, yet classical visual--inertial filters must wait for parallax before they start and then retain only sparse landmarks. Feed-forward geometry models, in contrast, predict dense structure from a few images but provide neither metric scale nor gravity. We present DAVIO, which uses a single multi-view depth model, Depth Anything~3, for both start-up and mapping. At start-up, a five-image window and preintegrated IMU measurements form a feature-free linear system. Its robust, conditioning-checked solution bootstraps a VIO filter through buffered replay. During tracking, the filter's metric poses condition the depth model. Residual scale is corrected only along viewing rays, which preserves the metric camera baselines, and a gravity-preserving submap graph with drift-gated revisits refines the map. On EuRoC, DAVIO starts markedly earlier, reduces the localization error, and maps more accurately than SOTA feed-forward mappers given identical poses. On building-scale ORI sequences, DAVIO is on bar or better than SOTA mappers on the same odometry, and degrades far less when GT poses are replaced by real odometry. We release the code of DAVIO, a real-time dense metric SLAM system, to the community.

0.17

F$^2$ SLAM: Turning Feed-Forward Geometry into Persistent Factors for SLAM

cs.CV ·2026-10-04 ·Zhisong Xu, Fan Zhu, Jiawei Qian, Ziyu Chen, Zhenjun Zhao +1 more
similarity 0.70
Abstract · 21pages

Feed-forward 3D models provide strong multi-view geometric priors, while on- line simultaneous localization and mapping (SLAM) relies mainly on local mea- surements and can accumulate drift over long sequences. Existing attempts to combine the two typically treat feed-forward predictions as an external geomet- ric state that is aligned or fused with the online estimate after the fact, which keeps broader multi-view evidence outside the optimizer that refines the SLAM state. We present F2SLAM, which instead converts feed-forward geometry di- rectly into optimization-native target-weight measurements attached to a persis- tent dense factor graph. A high-frequency stream maintains local tracking con- straints and graph connectivity, while a low-frequency stream uses wider multi- view context to selectively refresh existing measurements after a state-consistency check. Both streams constrain the same poses, inverse depths, and optional cam- era intrinsics through a single dense bundle adjustment. Experiments on multiple benchmarks demonstrate consistently strong trajectory estimation and improved dense reconstruction in both calibrated and uncalibrated settings. Notably, the uncalibrated configuration reduces the average ATE RMSE from 0.030 m for the strongest feed-forward baseline to 0.002 m on the Replica dataset.

0.37

Evaluation of Monocular SLAM Systems on High-Altitude Nadir UAV Footage

cs.RO ·2026-08-19 ·Gašper Spagnolo, Matej Dobrevski, Danijel Skočaj
publishedbenchmark similarity 0.67
Abstract · 6 pages, accepted to ERK 2026

Aerial nadir video combines weak geometric constraints with severe perceptual aliasing, making it a difficult regime for monocular SLAM. We benchmark five monocular SLAM systems on local UAV flights, synthetic city-scale imagery, and long-range aerial sequences. To isolate visual performance, we provide no inertial or GNSS aiding. Performance varies strongly with environment and trajectory scale: MASt3R-SLAM achieves the lowest mean horizontal MAE on the five DJI flights (0.53% of reference path length), whereas no system consistently preserves global trajectory shape on the long GES and ALTO sequences. Overall, DROID-SLAM performs best, averaging 2.88% of reference path length across completed runs. Vertical position remains poor, and large-area trajectories remain highly distorted despite loop-closure capability. Current monocular SLAM methods are by themselves therefore insufficient for reliable visual-only aerial navigation.

0.33

VGGT-GS SLAM: Uncalibrated Monocular Gaussian Splatting SLAM with Feed-Forward Priors

cs.CV ·2026-09-17 ·Yuhang Han, Hao Wang, Jiaxi Cao, Xingyu Liu
similarity 0.67
Abstract · 9 pages, 4 figures

We present VGGT-GS SLAM, a monocular 3D Gaussian Splatting SLAM system designed for uncalibrated videos. Starting from feed-forward VGGT pose and depth priors, our system performs submap differentiable bundle adjustment that jointly refines camera poses and a 3D Gaussian map, while optimizing submap-shared intrinsics and radial--tangential distortion through analytic calibration Jacobians. To improve global consistency, we introduce Gaussian-native alignment (GNA) for camera-anchored scale refinement between sequential submaps and verification of loop-closure candidates. Extensive experiments on standard indoor benchmarks show consistent improvements in localization accuracy and strong rendering quality under uncalibrated settings, establishing a strong baseline for uncalibrated Gaussian SLAM.

0.26

MFVINS: Multiple Fisheye Camera-Based Visual Inertial System

cs.RO cs.CV ·2026-09-08 ·Eunseong Jang, YuJin Chung, Sang Jun Lee, Jihyun Yoon, HyungGi Jo
similarity 0.67
Abstract · 29 pages, 11 figures

A simultaneous localization and mapping (SLAM) method using a monocular camera and a low-cost inertial measurement unit (IMU) sensor is an effective way to fulfill a low-cost sensor configuration. Using this sensor configuration, visual-inertial system (VINS) focuses on fusing data from a camera and an IMU sensor to estimate the six degrees-of-freedom (DOF) of the sensor pose. Typically, VINS uses only a single camera as visual input, which lead to problems such as error accumulation due to occlusion, various illumination, and textureless environments. In this paper, we propose a new multiple fisheye camera-based visual-inertial system called MFVINS. We present an IMU-aided FAST feature tracker for multiple cameras that enables efficient extraction and robust matching of local features. Then, the proposed method filters out outliers caused by fisheye distortion on the normalized image plane. Subsequently, a new reprojection error with physical validity constraints is proposed for bundle adjustment using learning-based depth estimation. The proposed method is applied to various scenarios, and its effectiveness is demonstrated by comparing previous VINS methods. In particular, MFVINS is implemented in real-time process to leverage the advantages of using multiple cameras -- robustness against occlusion and textureless regions -- while reducing the computational burden.

0.29