CS Paper Radar

Universal Quantizer Design for Identification of Systems with Memory

Yibo Shi, Ying Wang, Karl H. Johansson, Cristian R. Rojas

eess.SY ·submitted 2026-11-16 10:15 UTC · v1

Abstract

In system identification from quantized observations, the quantizer determines how much information about the parameters the observations retain, and hence the achievable estimation accuracy. Quantizer design can be guided by the Fisher information matrix (FIM), which assesses the parameter information retained by candidate quantizers. Existing methods, however, typically rely on closed-form expressions of the FIM. This paper proposes a universal quantizer design method for general systems with memory. Its core is a universal FIM estimator that evaluates the information per bit from simulated trajectories, and the thresholds are designed by maximizing the estimated criterion under a bit budget. For unknown parameters, the design is implemented through a two-stage procedure. Numerical studies on a quantized ARX system yield designs close to the reference optimum, while a nonlinear cascaded-tanks example reduces the identification error by about 50% relative to a single median threshold.

Comment
8 pages

Closest papers

Nearest neighbours by meaning across the whole index.

A Target-Centric Survey of Quantization-Aware Training

cs.LG ·2026-08-30 ·Jiamin Song, Mengjie Zhao, Zijing Wang, Yongkang Liu, Qian Li +4 more
top venuesurvey similarity 0.60
Abstract · Accepted to EMNLP 2026 (Main Conference)

The rapid development of LLMs incurs prohibitive memory footprints and intensive computational demands. Quantization-Aware Training (QAT) techniques have emerged as a promising solution to address these challenges by explicitly simulating quantization effects during model training, yielding low-bit models that achieve accuracy comparable to their full-precision counterparts. In this work, we provide a target-centric survey of QAT, aimed at clarifying both its theoretical foundations and its evolving implementation landscape. We systematically review existing QAT methods through a target-centric taxonomy and synthesize cross-target differences in error characteristics, numerical formats, and strategy transferability. We further summarize QAT evaluation paradigms and discuss challenges in optimization and deployment, outlining potential directions for future research.

0.30

FAMPWQ: Fisher Information-based Adaptive Mixed Precision Weight Quantization for Effective LLM Inference

cs.LG cs.AIcs.DC ·2026-08-24 ·Gongwei Lee, Ji Liu, Juncheng Jia, Ji Wu
top venue similarity 0.56
Abstract · 21 pages, to appear in EMNLP 2026

Recent years have witnessed remarkable achievements of Large Language Models (LLMs) in multiple domains, while the excessive resource requirements of LLMs hinder the deployment on resource-constrained devices. Although model quantization stands out as an effective approach, conventional quantization approaches typically incur severe performance degradation due to uniform bit-width or simple heuristic sensitivity evaluation. In this paper, we propose a novel Fisher information-based Adaptive Mixed Precision Weight Quantization approach, i.e., FAMPWQ, which performs layer-adaptive weight quantization for effective LLM inference on commodity GPUs. First, we propose a system model with a novel Fisher information metric to measure the layer-wise sensitivity to quantization. Second, we propose a reinforcement learning-based bit-width allocator in FAMPWQ, which generates an adaptive bit-width allocation strategy based on the Fisher information sensitivity metric. Extensive experiments on 7 models and 5 benchmarks demonstrate that FAMPWQ significantly outperforms 7 baseline approaches in terms of PPL (up to 3.39 smaller), accuracy (up to 6.87% higher), and LLM-as-a-judge comparison (up to 76% win rate).

0.41

LoopQuant: Accurate and Efficient Post-Training Quantization for Looped Transformers

cs.LG cs.AI ·2026-10-12 ·Zhixiong Zhao, Zukang Xu, Xing Hu, Lifeng Liu, Guangyu Sun +1 more
code/data similarity 0.56
Abstract

Looped Language Models (LoopLMs) improve parameter efficiency by recursively reusing shared Transformer modules, yet their repeated computation over evolving recurrent states poses new challenges for low-bit deployment. Existing post-training quantization (PTQ) methods, largely designed for feed-forward Transformers, fail to account for cross-loop activation dynamics, heterogeneous loop sensitivity, and recursive error propagation, leading to substantial performance degradation at low precision. To address these challenges, we propose LoopQuant, a loop-aware PTQ framework for accurate and efficient low-bit quantization of LoopLMs. LoopQuant is built on three core components: 1) Cross-Loop Distribution Canonicalization (CLDC) learns a shared quantization-friendly representation across recurrent states while preserving parameter sharing; 2) Interaction-Aware Loop-wise Precision Allocation (ILPA) allocates activation precision under a fixed bit budget by modeling task-level loop sensitivity and cross-loop interactions; and 3) Loop-Conditioned Task Calibration (LCTC) further aligns quantized inference with the low-bit recursive trajectory through lightweight task-space calibration. Extensive experiments across LoopLM architectures demonstrate that LoopQuant consistently outperforms existing low-bit PTQ methods. On Ouro-2.6B, LoopQuant under W4A4 surpasses all W4A8 baselines in performance, while reducing model memory by 65.3% with only 3.4% additional storage overhead over naive INT4 and achieving a 1.7 times decoding speedup over BF16. These results demonstrate a strong balance among accuracy, compression, and inference efficiency, providing a practical and deployment-friendly solution for low-bit LoopLM inference. The code is available at [https://github.com/Kishon-zzx/LoopQuant].

0.34

MatMoE: Matryoshka Mixture-of-Experts with Dynamic Mixed-Precision Quantization for Efficient Inference

cs.LG cs.AI ·2026-11-01 ·Renjie Wei, Haochen Huang, Chuyu Qiu, Jinqi Wen, Dehao Xu +1 more
published similarity 0.56
Abstract · Accepeted by ICCAD 2026

Mixture-of-Experts (MoE) architecture has been widely adopted in large language models (LLMs) since it reduces the computational cost through sparse expert activation. However, the massive parameter scale of MoE models hinders their deployment on resource-constrained edge devices. Although existing mixed-precision quantization reduces the model size, they are inherently static, fixing the bit-width of each expert across decoding steps. Such static schemes yield suboptimal performance as they overlook the dynamic variation in expert importance during decoding. Furthermore, they fail to adapt to the dynamic latency constraint driven by the fluctuating system utilization. To address these challenges, we propose MatMoE, a dynamic mixed-precision quantization framework for efficient MoE inference. MatMoE features: (1) a Matryoshka MoE PTQ algorithm that enables experts to operate flexibly at multiple precisions within a stringent memory budget; (2) a floor-and-compensation quantization method that eliminates redundant memory accesses in the Matryoshka representation; and (3) a dynamic bit-width allocation strategy that determines the precision for each expert based on their routing scores to satisfy the dynamic latency requirement. We implement our MatMoE system atop llama.cpp for both CPU and GPU platforms. Extensive evaluations across three modern MoE models and challenging benchmarks demonstrate that MatMoE achieves $4.0\% \sim 18.3\%$ higher accuracy than state-of-the-art static mixed-precision method. Compared to llama.cpp, MatMoE delivers $1.3\times \sim 3.7\times$ speedup on Raspberry Pi 5, and $1.2\times \sim 1.3\times$ speedup on NVIDIA RTX 4090 and Jetson AGX Orin.

0.20

Estimation with Quantized Parameter Side-Information

cs.IT ·2026-10-08 ·Mathis Wetterwald, Ofer Shayevitz, Michèle Wigger
published similarity 0.55
Abstract · 5 pages, conference paper

This paper presents upper and lower bounds on the minimax risk of a parameter estimation problem where the estimator not only observes independent and identically distributed observations but also a quantized version of the parameter, where the quantization has a limitation on the number of levels, but can be optimized otherwise. Our upper and lower bounds have similar decay rates for large number of observation samples and quantization levels.

0.40

SteerQuant: Steering Quantization Error with Action-Guided Scaling in World-Action Models

cs.RO ·2026-09-30 ·Yunhan Wang, Haodong Wang, Zhiming Liu, Zicong Hong, Qianli Liu +5 more
hot direction similarity 0.55
Abstract · Yunhan Wang and Haodong Wang contributed equally to this work

World-action models (WAMs) jointly generate future world states and actions through iterative denoising, using shared weights to process heterogeneous semantic streams of video, proprioceptive, and action tokens. Quantization reduces inference cost, but comparable numerical errors in different streams can have markedly different effects on final actions, making numerical accuracy alone insufficient for reliable control. We introduce SteerQuant, a 4-bit quantization framework for WAMs that steers errors toward computations with less influence on final actions. It maps how each stream's quantization errors affect final actions and uses this map to guide shared channel scaling. Activation scaling is further calibrated for each stream and denoising step to accommodate changes in activation ranges and action impact. This adapts quantization to different stream requirements without duplicating weights or increasing bit-widths for selected streams. To reduce the extra kernel launches and memory traffic introduced by scaling, we develop Rudder, a 4-bit inference engine for WAMs that fuses scaling and output compensation into low-bit kernels. Under W4A8 and W4A4, SteerQuant maintains mean LIBERO success within 0.8 percentage points of full precision, while delivering up to $2.23\times$ denoising speedup over BF16 across three WAMs with reduced peak GPU memory usage. On a real dual-arm robot, W4A8 deployment achieves a $1.35\times$ end-to-end inference speedup while maintaining average task success relative to BF16.

0.49

Data-driven control of linear systems using quantized data

eess.SY math.OC ·2026-10-05 ·Zhenghao Li, Guosong Yang
similarity 0.55
Abstract

This paper studies data-driven stabilization of unknown discrete-time linear systems using only quantized state measurements that take values in finite sets. The proposed approach consists of two stages. In the controller design stage, we collect quantized data while maintaining a prescribed quantization error bound and use them to formulate a semidefinite program (SDP). We establish a verifiable condition under which any feasible solution to the SDP yields a stabilizing feedback gain, and show that a stabilizing gain can always be obtained when the quantization error is sufficiently small. In the stabilization stage, a Lyapunov-based quantizer update rule is developed to guarantee exponential convergence under quantized state feedback. As a key feature, the number of quantization cells remains finite in both stages and constant during stabilization. Simulation results illustrate the effectiveness of the proposed approach.

0.24

IMC-CLINIC: Coupled Loss-Informed Newton Iterations for Clipping in Analog In-Memory Computing

cs.AI ·2026-09-28 ·Yung-Chin Chen, Chia-Yu Chen, Naveen Verma
similarity 0.54
Abstract

Analog in-memory computing (IMC) offers a promising path toward energy-efficient large language model (LLM) inference by executing matrix multiplications (MatMul) directly within memory arrays in the analog domain. Its efficiency, however, comes with an additional source of error: limited-precision analog-to-digital converters (ADCs) quantize accumulated analog partial sums, introducing output-side error distinct from conventional activation and weight quantization at the MatMul inputs. Clipping can mitigate both operand and ADC quantization errors, but the optimal clipping factors must jointly balance activation rounding and clipping, weight rounding and clipping, and ADC quantization. Existing clipping methods, designed for digital quantization, do not explicitly optimize these coupled sources of IMC error and often rely on costly search-based calibration. We introduce IMC-CLINIC (Coupled Loss-Informed Newton Iterations for Clipping), a clipping calibration framework based on an analytical surrogate for IMC MatMul output error. The surrogate jointly models operand quantization, accumulated clipping-induced bias, and ADC quantization, enabling efficient evaluation of its gradient and approximate curvature from a small calibration set. IMC-CLINIC jointly optimizes activation and weight clipping factors using a safeguarded Newton-type method. Across multiple models and datasets, it improves average zero-shot accuracy by 6.5-11.5 percentage points over the grid search baseline while reducing calibration time by factors of 10.0-12.1. Its analytical surrogate closely tracks empirical IMC output error, and its optimizer is certified within 1% of the global optimum under the loss objective across all projections on two representative models.

0.54