CS Paper Radar

Counting What Matters: Reducing Redundant Object Detections in Overlapping UAV Mapping Imagery for Disaster Response

Max Schulte, Hartmut Surmann, Julien Meine

cs.AI ·submitted 2026-11-16 13:27 UTC · v1
publishedcode/data

Abstract

UAV mapping flights enable rapid aerial reconnaissance of large-scale incident sites in civil protection. However, the image overlap required for orthophoto generation causes every physical object to be detected multiple times across images, while dynamic objects may be omitted from or duplicated in the resulting orthomosaic. Analysis based on the orthophoto alone is therefore structurally insufficient. We address this by detecting objects on the individual images and merging redundant detections across them. This task lies between multi-object tracking and re-identification, as mapping flights form temporally ordered but sparsely sampled sequences with object reappearances across flight strips. We fine-tune YOLO detectors on a new domain-specific nadir dataset from real civil protection operations, roughly doubling mAP50 over the previous system, and propose re-identification approaches based on 3D positions from sparse reconstruction, DINOv3 appearance embeddings, and their combination via constrained greedy clustering. %On four manually annotated real-world mapping flights, the combined weighted multi-pass approach achieves the best trade-off between association accuracy and count error. On four manually annotated real-world mapping flights, an association-only evaluation using ground-truth detections shows that the combined weighted multi-pass approach provides the best trade-off between association quality and count error. It is integrated into the open-source web application ARGUS and visualized as verifiable, correctable object groups for first responders. https://github.com/RoblabWh/argus

Comment
9 pages, 6 figure, IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2026, Incheon, Korea, November 02-04, 2026
Journal ref
IEEE International Symposium on Safety, Security, and Rescue Robotics, SSRR 2026, Incheon, Korea, November 02-04, 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Detector-Integrated Multi-Cue Association for Occlusion-Aware UAV Multi-Object Tracking

cs.CV eess.IV ·2026-10-27 ·Shu-Hung Chou, Trong-An Bui, Wei-Ming Chen, Hsin-Piao Lin
benchmark similarity 0.70
Abstract

Multi-object tracking (MOT) in unmanned aerial vehicle (UAV) imagery is challenging because vehicles are small, visually similar, and frequently occluded, which leads to identity switches (IDSW). Appearance-based trackers such as DeepSORT rely on a standalone re-identification (ReID) network, whose per-target inference limits runtime speed, while the appearance of small or occluded vehicles remains unreliable. This paper proposes a detector-integrated multi-cue tracking framework. Lightweight projection heads are attached to the neck of the YOLOv8n detector to extract target embeddings through ROIAlign, producing detections and embeddings in a single forward pass. A multi-cue association cost then combines motion, IoU, and appearance distances with weights determined through ablation, complemented by low-score rescue and appearance-memory protection. On the UAVDT benchmark, the proposed method achieves a MOTA of 28.33, a HOTA of 31.16, and an IDF1 of 38.18 at 82.59 FPS, the best among the compared trackers in all three metrics, and reduces IDSW by 58.4\% compared with DeepSORT.

0.20

AerialOcc: Unified 3D Aerial Perception without Task-Specific Head

cs.CV ·2026-11-12 ·Fan Liu, Xiang Gu, Baoyu Lv, Chuanyi Zhang, Liang Yao +2 more
code/data similarity 0.66
Abstract

Aerial perception systems are increasingly expected to support diverse tasks, yet existing solutions remain fundamentally tied to task-specific outputs. Detection, segmentation, and other perception objectives are usually learned either by separate models or by sharing a backbone with multiple task heads, leaving the model itself unaware of the common structure underlying these tasks. We are interested in asking: can a single perception representation support different levels of understanding without being designed for any specific task? We notice that occupancy is a promising task-agnostic representation for drone perception. By modeling the spatial existence and semantics of the environment, it naturally bridges different perception granularities, from coarse scene understanding to fine-grained object localization. Therefore, we introduce AerialOcc, a unified occupancy-based perception model that enables multiple drone perception tasks from a single inference process, without maintaining task-specific prediction heads. To facilitate this direction, we construct AerialOcc-20K, a large-scale multi-class occupancy dataset for aerial environments. Extensive experiments show that AerialOcc achieves competitive performance across diverse perception tasks while preserving a unified architecture. Our findings demonstrate that occupancy can serve as a universal perception interface, offering a new perspective toward flexible and scalable visual intelligence for autonomous drones from a common 3D scene representation. Models and data are publicly available at https://github.com/guxiang2002/AerialOcc

0.40

Luggage re-identification: A study of strategies towards a real-world application

cs.CV cs.AI ·2026-10-29 ·Quentin Dhôte, Romaric Audigier
publishedbenchmark similarity 0.65
Abstract · 7 pages, 4 figures, 5 tables. Accepted at The 2026 IEEE International Conference on Content-Based Multimedia Indexing (IEEE CBMI)

Luggage re-identification (ReID) is a critical task in video surveillance for forensics, security or border management (suspicious or abandoned luggage recognition), as well as luggage management (lost luggage recovery). It enables the association of observations of the same luggage across disjoint camera views in complex environments such as airports, train stations and border crossing. While existing approaches primarily focus on appearance-based cropped image matching under relatively clean conditions, real-world scenarios are characterized by frequent occlusions, cluttered background and crowded scenes which significantly degrade performance. Yet, strategies leveraging the complementarity of multiple shots and views from different video streams is overlooked. In this paper, we study strategies for an end-to-end pipeline that operates from multiple video streams to detect and re-identify luggage. We evaluate different variants on a benchmark dataset acquired in real-world environments to address the questions of selecting and merging different views and shots of the same luggage as well as training on different environment datasets for an overall ReID performance improvement in practical applications.

0.27

YOLO12-MambaScan: An Efficient Object Detector with High-Frequency Enhancement and State-Space Modeling

cs.CV cs.IR ·2026-09-12 ·Hao Wang
benchmark similarity 0.65
Abstract

The rapid development of unmanned aerial vehicle (UAV) technology has made aerial-image object detection increasingly important for natural-resource monitoring, traffic management, and disaster response. Detecting small objects in aerial images remains difficult because objects occupy very few pixels, high-frequency cues are easily lost, and global context is hard to model in cluttered scenes. Existing detectors often retain insufficient edge, corner, and texture information. We propose \ours, an aerial-image detector built on the YOLO12 architecture. The model combines a triple-path high-frequency enhancement convolution module (TriPathHFConv), receptive-field coordinate-attention convolution (RFCAConv), and a Mamba-based global-context module. On VisDrone, at an input resolution of 960*960, ours achieves 60.0% mAP@50 and 38.6%mAP@50:95, demonstrating a favorable accuracy--efficiency trade-off for small-object detection. The benchmark and dataset protocol follow the VisDrone challenge setup.

0.17

AVID: A Weakly Aligned RGB-Infrared Dataset and Perturbation Benchmark for Tiny Aerial Targets

cs.CV ·2026-10-29 ·Dharini Raghavan, Vishnu Rao, Sethu Selvi S
benchmark similarity 0.65
Abstract · 23 pages, 8 figures

Long-range detection of small drones is complicated by their visual similarity to birds and by the limited detail available from ground-based cameras. Combining visible and infrared observations offers complementary information, but their usefulness depends on target size, cross-modal alignment, and image quality. We present AVID, a benchmark for studying these factors using real RGB-infrared bird-drone surveillance footage originating from the Drone Detection Dataset and curated for the IEEE ICIP 2025 Video and Image Processing Cup. AVID comprises 32,040 corresponding frame pairs from 115 videos, with 35,952 existing bird and drone annotations at $320\times256$ resolution. Targets occupy an unusually narrow size range: 68.1\% have a geometric-mean bounding-box side of 8--16 pixels, and 99.0\% meet the COCO small-object criterion. To characterize the geometric difficulty of combining the modalities, we introduce an object-relative alignment ratio and an alignment burden curve. In a sample of 300 frame pairs, 32.3\% have estimated global translations greater than 5 pixels; among the 264 pairs with matching annotations, 16.3\% exceed one median target side. We further introduce AVID-C, which simulates seven families of image degradation at five severity levels independently in RGB, infrared, or both. A fixed-feature analysis examines how scale, degradation, and added cross-modal shifts affect fitted bird-drone class overlap. At 12--16 pixels, the Bhattacharyya error bounds are 0.148 for RGB, 0.198 for infrared, and 0.046 for their combined features. These values describe separation in the specified feature and density models, not detector accuracy. Together, AVID and AVID-C support scale-aware, alignment-aware, and sensor-specific studies of tiny aerial targets.

0.23

VisDrone-ReID: A Unified Multi-Category Object Re-Identification Benchmark

cs.CV ·2026-11-16 ·Asmau Lawal Bilbis, Nathanael L. Baisa, Amudhavel Jayavel
benchmark similarity 0.65
Abstract

Object re-identification (Re-ID) benchmarks remain predominantly confined to single-category evaluations, limiting the development of unified systems capable of operating across diverse object types. This paper presents VisDrone-ReID, a unified multi-category Re-ID benchmark derived from the VisDrone2019-MOT dataset through a principled conversion pipeline. The pipeline resolves structural incompatibilities between multi-object tracking annotations and Re-ID evaluation requirements, addressing sequence-scoped identity collision, temporal redundancy, and the absence of a principled identity-level train/test split. The resulting benchmark comprises 9,516 identities and 150,016 images across ten object categories - pedestrian, people, bicycle, car, van, truck, tricycle, awning-tricycle, bus, and motor, sourced from 80 unmanned aerial vehicle (UAV) sequences captured across urban environments. A leave-one-out (LOO) evaluation protocol is adopted to provide a comprehensive assessment. Baseline experiments across four representative Re-ID models spanning CNN and transformer architectures establish the first systematic performance reference on this benchmark. Results reveal a consistent Rank-1 to mAP gap across all models, suggesting that VisDrone-ReID presents a genuine retrieval challenge beyond nearest-neighbour matching. Per-category analysis identifies pedestrian as the most challenging category and reveals that vision-language pretraining provides a measurable advantage on semantically distinctive categories. VisDrone-ReID provides a consistent platform for studying multi-category object re-identification under the scale variation, viewpoint challenges, and category diversity characteristic of real-world surveillance scenarios.

0.12

AerialDojo-200K: A Large-Scale Benchmark Suite for Open-World Aerial Object-Goal Search

cs.CV cs.AIcs.ETcs.MM+1 ·2026-09-28 ·Tongtong Feng, Xin Wang, Haoran Hou, Ren Wang, Weiran Wang +7 more
benchmarkcode/data similarity 0.64
Abstract

Open-world aerial object-goal search is a foundational yet challenging task, requiring aerial agents to autonomously explore large-scale, unstructured three-dimensional environments and reach target objects specified by semantic descriptions or reference images, rather than following route-specific instructions. However, research in this task remains at a nascent stage and relies on small, environment-specific benchmarks with heterogeneous action spaces and data formats. These limitations hinder large-scale training and cross-benchmark evaluation, constraining the scalability and generalizability of aerial agents. To address this problem, we propose AerialDojo-200K, a large-scale benchmark suite for open-world aerial object-goal search, with 3 times as many scenes and 18.7 times as many task instances as the largest existing benchmark for this task. Specifically, we construct 42 simulation scenes spanning four scene families and 21 scene types, including 18 urban, 12 natural, six infrastructure, and six disaster scenes. To ensure data quality, 12 annotators spent two months manually annotating 109 landmarks, 2099 target objects, and 2099 object anchors across these scenes. We further construct 205,732 task instances, comprising over 100K semantic-goal and over 100K image-goal instances across Base, Standard, and Long-Horizon settings. Each task instance includes a collision-free reference trajectory and corresponding multi-view video recordings. We also develop a unified evaluation framework with a scene partition comprising 21 in-distribution scenes and 21 out-of-distribution scenes. Finally, our evaluation of five open-source and four closed-source multimodal large language models reveals that there is still a long way to go toward achieving general-purpose aerial agents. All can be found at https://fengtt42.github.io/AerialDojo/.

0.25

Understanding Dynamic Scenes at Gigapixel Scale: Wide-Area Spatio-Temporal Perception from UAVs

cs.CV ·2026-09-16 ·Yuhang Zhu, Meiyi Zhu, Yunkai Dang, Zhangnan Li, Yuxuan Wang +2 more
similarity 0.64
Abstract · 9 pages, 5 figures, 3 tables

UAV-borne imaging has advanced from megapixel to gigapixel sensors, shifting aerial perception from recognizing individual targets to understanding entire dynamic scenes. We characterize this demand as Wide-area Spatio-temporal Scene Understanding (WSTU), which requires wide-area coverage, per-target resolution, and temporal continuity at once, a combination existing datasets lack. To fill this gap, we introduce an ultra-High-resolution (12768x9564) Airborne Remote-sensing Dataset (HARD) annotated at three levels for object detection, multi-object tracking, and scene-level visual question answering. Ultra-high-resolution imagery raises per-frame processing time to seconds. At that scale latency can no longer be ignored in evaluation. Thus, we propose a latency-aware metric for multi-object tracking called streaming-HOTA (s-HOTA). Extensive baseline experiments show how ultra-high-resolution processing reshapes each task. For detection, the end-to-end pipeline affects accuracy and speed as much as the detector itself does. For tracking, high latency charges the association axis far more unevenly than the detection axis, and association is where pipelines diverge. As a result, the pipeline that performs best offline can lose its lead under s-HOTA. For VQA, vision-language models remain weak at cross-frame identity binding and cannot transfer their single-frame gains to it. Together these findings show that the baselines we evaluate fall short of WSTU. HARD provides the data and the systematic baselines to advance it.

0.33