CS Paper Radar

SLED: Sensor SLicing from Edge to Datacenter

Alan Subedi, Avhishek Biswas, Apala Pramanik, Amlan Balabantaray, Mikhail Titov, Santosh Pitla, Ozgur Kilic, Mehmet C. Vuran

cs.AI cs.CEcs.DCcs.ETcs.NI ·submitted 2026-11-16 21:51 UTC · v1
top venuecode/data

Abstract

Modern sensing systems generate large volumes of heterogeneous data streams from multiple sensor modalities, increasing reliance on datacenters for computation, artificial intelligence/superintelligence (AI/SI) inference, and AI/SI training. Each sensor stream may have different network and compute requirements depending on its type and data volume. However, current wireless systems typically allocate resources at the device level, leading to contention among co-located sensor streams, where bulk data transfers may starve latency-critical telemetry. To this end, this paper introduces Sensor Slicing (SL). SL provides deterministic, medium access control (MAC)-level isolation for individual sensors within a single user equipment (UE) in open radio access networks (O-RAN). Using agentic coding techniques, SL is implemented in two O-RAN-compliant packages, reducing development time by 400 times (2 h 40 min [OCUDU] vs. 6.5 weeks [OAI]), 228-fold fewer human prompts (4 vs. 913), and less than half the tokens (0.64B vs. 1.43B). An associated end-to-end framework, SLED, is implemented to establish per-sensor radio and network isolation across edge, campus, and remote high-performance computing (HPC) tiers. Over-the-air wireless experiments demonstrate that while conventional network slicing causes critical delays to increase more than 2,300-fold under high traffic load, SLED maintains stable latency. Scaling evaluations on the two RAN stacks show that throughput remains within 0.9% and 1.4% of expected allocations even as the number of sensor slices increases. The results demonstrate that SLED preserves latency-critical telemetry while effectively utilizing resources across the sensor-to-HPC pipeline. The SLED software and evaluation datasets are publicly available at https://github.com/UNL-CPN-Lab/SLED-Sensor-SLicing-from-Edge-to-Datacenter.

Comment
Accepted in IEEE Annual Congress on Artificial Intelligence of Things (IEEE AIoT) 2026. The SLED software and evaluation datasets are publicly available at https://github.com/UNL-CPN-Lab/SLED-Sensor-SLicing-from-Edge-to-Datacenter

Closest papers

Nearest neighbours by meaning across the whole index.

Performance Analysis of ISAC Slicing with Sensing-Assisted Communication and Communication-Assisted Sensing

cs.NI eess.SY ·2026-10-02 ·Daniel Campos, Jacek Kibilda
published similarity 0.66
Abstract · Paper accepted to be published in the IEEE ISAC 2026 conference. 6 pages, 4 figures, 1 table

Integrated Sensing and Communication (ISAC) will allow 6G networks to provide both sensing and communication services through shared infrastructure and spectrum resources. However, network slicing that views these services as distinct slices with distinct objectives and performance requirements will inevitably miss the emergent value of integrating them. By considering Sensing-Assisted Communication (SAC) and Communication-Assisted Sensing (CAS), which create interdependencies between services, we can observe trade-offs in resources dimensioned to support each slice and, ultimately, the ISAC slicing performance. As such, this paper proposes a performance analysis of an ISAC slicing framework that accounts for resource allocation and sensor density, as well as SAC and CAS, dimensioned to achieve slice-specific Service-Level Agreement (SLA) satisfaction. Numerical simulations, across different bandwidth allocations, sensor deployments, and demand scenarios, show that ISAC slicing performance is fundamentally constrained by sensing resolution, shaped by demand, and scaled by sensor deployment. These findings provide insights for the design of future ISAC slicing mechanisms.

0.27

Bringing dApps to OCUDU: An E3 Controller for Real-Time Open RAN Intelligence

cs.NI ·2026-09-02 ·Angelo Feraudo, Ravis Shirkhani, Stefano Maxenti, Andrea Lacava, Michele Polese +1 more
code/data similarity 0.59
Abstract

Real-time control loops in Open RAN are increasingly colocated with the gNB, where dApps, i.e., programmable applications with sub-millisecond access to PHY- and MAC-layer signals, enable latency-critical use cases such as spectrum sharing, channel-aware scheduling, and integrated sensing. What turns dApps from a per-vendor mechanism into a portable component of the emerging AI-RAN ecosystem is the E3 interface: this interface defines how a dApp subscribes to RAN telemetry, receives indications, and issues control actions back to the RAN. To date, E3 has been implemented on OpenAirInterface and on NVIDIA Aerial; OCUDU, i.e., the Linux Foundation's open-source CU/DU project, has lacked a comparable E3 path. We close that gap with an open-source E3Controller for OCUDU, designed as a sidecar daemon so the E3 protocol stack, service-model logic, and dApp interactions live entirely outside RAN core processing, which is touched only through well-defined instrumentation hooks. We validate the controller with two reference service models, Spectrum and L1, that deliver O-RAN fronthaul I/Q samples to a spectrum-sensing dApp over a Foxconn RPQN 4800 radio unit. Our evaluation shows that the E3 path imposes no measurable throughput penalty on the OCUDU RAN, demonstrating that a real-time dApp/RAN interface is feasible on production-grade open RAN software.

0.65

AI-Native Open RAN: A Roadmap from xApps and rApps to Autonomous Network Agents

cs.NI ·2026-09-14 ·Ryan Barker, Alireza Ebrahimi Dorcheh, Tolunay Seyfi, Mohammad Raihan Uddin, Alireza Mohammadhosseini +4 more
similarity 0.58
Abstract

Open Radio Access Networks (O-RAN) have emerged as a transformative paradigm for future wireless systems by introducing openness, virtualization, disaggregation, and programmable intelligence through the RAN Intelligent Controller (RIC). The availability of standardized interfaces and near-real-time control loops has created unprecedented opportunities for integrating artificial intelligence (AI) into radio access network management and optimization. Over the past several years, a broad range of AI techniques have been proposed to address key O-RAN challenges such as radio resource management, network slicing, traffic prediction, mobility management, interference mitigation, and spectrum sharing. Despite significant progress, existing solutions often remain task-specific, require extensive retraining, and exhibit limited generalization across deployment environments and network conditions. This paper presents a comprehensive review of AI-enabled O-RAN systems and provides a unifying perspective on the evolution of intelligence in wireless networks. We first examine the O-RAN architecture and the role of intelligence within near-real-time and non-real-time RIC frameworks. We then develop a taxonomy of AI approaches for O-RAN, covering machine learning, deep reinforcement learning (DRL), digital-twin-assisted optimization, and emerging foundation-model-based architectures.

0.04

Experimental Classification of xApp Conflicts in O-RAN: Slicing vs. Per-UE Scheduling

cs.NI ·2026-10-23 ·Rashmi Sharan Sinha, Merim Dzaferagic, Marco Ruffini, Nima Afraz
similarity 0.58
Abstract · Accepted for 2026 IEEE Globecom Workshops (GC Wkshps): 7th Workshop on Emerging Topics in 6G Communications (GC Wkshps 2026-Topics-in-6GComm…

Concurrent applications (xApps) in the Near-Real-Time RAN Intelligent Controller (Near-RT RIC) of the Open Radio Access Network (O-RAN) can issue control intents that are jointly infeasible when they act on hierarchically coupled radio resources. This paper experimentally studies an interaction between slice-level physical resource block (PRB) allocation and per-user-equipment (UE) scheduling. We implement a utilisation-aware slicing control (the spectral-efficiency xApp) that reclaims a fixed fraction of the baseline allocation from under-utilised slices and redistributes pooled capacity to saturated slices. The control logic is exercised in simulation and on a 5G testbed comprising an OCUDU-based next-generation NodeB (gNB), an Open5GS core, a Universal Software Radio Peripheral (USRP) X310, and five commercial off-the-shelf (COTS) UEs. Because the gNB counters available in this testbed are UE-keyed but not slice-labelled, the slicing control derives a per-slice throughput proxy from core-side traffic measurements. A command-bus detector evaluates explicitly defined control-intent conditions: a per-UE floor above its parent-slice cap, aggregate UE floors above the cell budget, and repeated slice-target changes within a specified window. Over a 276-cycle continuous run, the detector logged 147 per-slice floor--cap violations, 49 shared-budget over-subscription episodes, and 11 allocation-oscillation episodes. Against the conventional static slice split replayed on the same load trace, the slicing control reduces unmet demand by 12--33\,\% and idle allocation by 21--23\,\%. The results demonstrate reproducible cross-granularity control-intent interactions on real hardware and provide an experimental basis for analysing conflict detection in O-RAN.

0.25

Value-Based Massive Access through Goal-Oriented Irregular Repetition Slotted ALOHA

cs.NI cs.MA ·2026-09-17 ·Pietro Talli, Andrea Munari, Federico Mason, Federico Chiariotti, Andrea Zanella
similarity 0.56
Abstract

The goal-oriented communication paradigm is poised to enable novel real-time applications by easing the burden on communication networks while still delivering task-relevant information. However, efforts so far have focused on the encoding problem, while the design of medium access schemes is still in the early stages of development, especially when connectivity is to be provided to a massive number of devices, e.g., for remote monitoring. In this respect, existing goal-oriented approaches are often centralized or based on simplified underlying mechanisms, requiring unrealistic assumptions. In this work, we present the Goal-oriented Irregular Repetition Slotted ALOHA (GO-IRSA) scheme, which combines modern random access techniques with belief-based policies. GO-IRSA does not impose significant computing loads on the sensors or require frequent feedback, and it can reduce the average and worst-case error of the estimate of a distributed Wiener process by over 30% with respect to the optimal centralized solution in a network with thousands of sensors, and is robust to imperfect interference cancellation and inaccurate process knowledge.

0.26

SensorGuard-RV: Sensor-to-Register Data Protection for Resource-Constrained RISC-V Devices

cs.CR cs.AR ·2026-11-05 ·Hamid Noori, Carlton Shepherd
hot direction similarity 0.55
Abstract

Embedded systems rely on sensor measurements that traverse a complex hardware-firmware stack (e.g. peripheral interfaces, communication buses, memory, and drivers) before reaching the applications that use them. At worst, an attacker with access to this path may successfully intercept, overwrite, fabricate, or replay readings. This may cause systems that act on such data, such as flight controllers and industrial processes, to behave incorrectly or unsafely. Existing defences, such as trusted execution environments and trusted I/O paths, still depend on trusted driver software and correctly configured access control, which remain fragile in practice. In response, we present SensorGuard-RV, a hardware-first approach that delivers sensor samples into processor registers without trusting intermediate software, buses, or memory. After configuration, a write-once ownership switch hands the sensor to a fixed-function controller that performs hardware-level authenticated encryption on sensor samples under a key inaccessible to software. We develop a new RISC-V instruction then instructs the CPU to decrypt the sample and writes it to a register only after verifying its tag and rejecting replays, including across resets. We implement SensorGuard-RV on the NEORV32 core with an ADXL362 SPI accelerometer on an Artix-7 FPGA. At 100 MHz, a protected sample reaches a register in 5,191 cycles (51.9 $μ$s), of which the two Ascon authenticated encryption engines account for 30. Because fixed-function acquisition removes per-byte software polling, the protected loop sustains 19,015 transactions/s, 5.3% above a software-driven SPI baseline. The added logic (3,155 LUTs and 2,215 registers; 5.0% and 1.7% of the device) is dominated by the Ascon engine and preserves the 100 MHz clock, while estimated power rises from 118 to 368 mW.

0.29

Inferring Sensitive Events in Multi-Mode Cyber-Physical Systems via Scheduling Side Channels

cs.CR eess.SY ·2026-11-13 ·Yifan Cai, Linh Thi Xuan Phan
similarity 0.55
Abstract

Many cyber-physical systems (CPS) are multi-mode: they switch between operating modes with different tasksets and timing parameters in response to physical events or user activity. We show that these mode changes create a timing side channel: by altering the interference experienced by co-running tasks, they let an unprivileged co-resident observer infer sensitive events, such as a homeowner's arrival or a vehicle's route, from its own execution timing and, on multicore platforms, its core assignment. Existing schedule-based attacks and defenses miss this channel because they assume single-mode systems or target a specific, known victim task. We present STAMP, a lightweight attack that needs no knowledge of task parameters or scheduling policy, and works whether or not the system exposes its modes. On a ZoneMinder home-security deployment, STAMP identifies the modes with 94.7% accuracy on unseen hardware, using under 0.5% of one core. On ROS 2 AMCL with the Oxford RobotCar dataset, it identifies which of seven route segments a vehicle traversed with 86.0% accuracy on unseen platforms. A schedule-randomization defense lowers detection recall to 0.53, at which setting only 53.9% as many jobs finish on time. At higher noise ($ε=10$), on-time job completion reduces to 14.4%, while introducing new leakage in 14.1% of the tasksets.

0.26

AmbSentry: Mitigating Sensing Eavesdropping in ISAC Systems by Harnessing Ambient IoT Devices

cs.CR ·2026-08-12 ·Yifan Zhang, Yu Bai, Riku Jantti, Zhu Han, Christos Masouros
similarity 0.54
Abstract

Integrated sensing and communication (ISAC) has emerged as a pivotal paradigm for 6G networks, enabling the synergistic convergence of spectral and hardware resources to maximize system efficiency. However, the inherent openness of wireless transmission exposes ISAC systems to critical security risks, particularly regarding the privacy of the sensing information. Unauthorized sensing eavesdroppers can extract sensitive target parameters (e.g., range and velocity) by directly estimating open sensing echo channels, rendering traditional data-based protection techniques ineffective. To mitigate this threat, this paper proposes AmbSentry, an ISAC system that prevents the leakage of sensing information to sensing eavesdroppers by harnessing naturally distributed passive ambient IoT (AIoT) devices. Specifically, these AIoT devices are strategically configured to act as cooperative jammers and ghost targets, introducing controllable interference into the sensing environment. Based on the proposed system, we formulate a joint optimization problem to maximize the integrated sidelobe level at the eavesdropper under quality-of-service (QoS) constraints, thereby degrading sensing eavesdropping performance while maintaining sensing and communication performance for legitimate receivers. Since the problem is non-convex, we further develop an efficient iterative algorithm to cooperatively design the transmit beamforming at the base station and the reflection modulations of the AIoT devices based on Dinkelbach transformation and block coordinate descent methods. The detailed results also demonstrate that AmbSentry significantly enhances sensing security, allowing the legitimate sensing receiver to achieve a 14-dB SNR advantage in detection probability and a hundred times lower estimation error compared to the eavesdropper.

0.37