CS Paper Radar

An Explainable Agentic AI Framework for Distribution System Load Restoration

S. M. Monzurul Hoque Chowdhury, Qinghua Li

eess.SY ·submitted 2026-11-17 00:06 UTC · v1

Abstract

Distribution system load restoration is a sequential decision-making problem in which restoration actions must maximize served load, prioritize critical loads, and preserve power-flow feasibility. This paper proposes an explainable agentic artificial intelligence (AI) framework for distribution system load restoration. The proposed framework uses multiple large language model (LLM) agents for planner guidance, strategic plan generation, decision arbitration, memory-based feedback, and explanation generation. Unlike unconstrained LLM-based control, the proposed method restricts agent decisions to feasible restoration actions and evaluates all candidate plans using deterministic AC power-flow feasibility checks. The framework is evaluated on IEEE 33-bus and 69-bus distribution feeders, as well as a larger IEEE 118-bus test case, and compared against reinforcement learning and planning baselines. The results show that the proposed agentic framework achieves better restoration performance while producing structured explanations for operator-facing decision support. A direct comparison with a Single-LLM-Agent baseline further shows that the proposed multi-agent decomposition improves weighted restored load and critical-load recovery compared with a monolithic LLM decision structure.

Closest papers

Nearest neighbours by meaning across the whole index.

RestoreBench: Can AI Agents Restore Power Flow Convergence?

cs.AI eess.SY ·2026-08-31 ·Riccardo Mansutti, Andrea Pomarico, Robert Jakob, Qian Zhang, Alberto Berizzi +1 more
benchmarkcode/data similarity 0.68
Abstract

Large Language Model (LLM) agents increasingly automate multi-step engineering workflows through tool use, interpretation of intermediate results, and iterative planning. Diagnosing and resolving non-convergent power flow cases is a promising yet largely unexplored application, as it requires engineering judgment, experimentation, and decision-making within constrained action spaces. We introduce a benchmark that evaluates these capabilities across multiple LLMs and three architectures: \emph{chatbot}, \emph{single agent}, and \emph{multi-agent} systems. The evaluation covers two power grids and 46 cases per grid, each requiring one or more corrective actions to restore convergence. The benchmark defines the simulation environment, observation and action spaces, and evaluation metrics, providing a reproducible foundation for developing agentic AI systems for power system planning and operation. The code is available at https://github.com/Mansutti081/RestoreBench

0.41

Explainable Post-Disaster Grid Observability Recovery Using Human-Oversight Agentic LLMs

eess.SY ·2026-09-15 ·Biswas Rudra Jyoti Arka, Sadman Sakib, Md. Zahidul Islam, Shamsun Nahar Edib
similarity 0.67
Abstract · 7pages, 5 figures, 2026 IEEE SmartGridComm

Post-disaster phasor measurement unit (PMU) outages reduce power-system observability and degrade operator situational awareness, requiring sequential restoration under limited resources. Existing PMU restoration methods based on optimization or heuristics can generate restoration schedules, but they often provide limited support for explanation, traceability, and operator interaction. This paper proposes an agentic tool-calling framework orchestrated by a large language model (LLM) for post-disaster PMU restoration and grid observability recovery. In this framework, the LLM does not directly solve the restoration optimization problem; instead, it coordinates validated backend tools required for post-disaster restoration, including observability assessment, restoration planning, state updates, and operator verification. The framework also maintains a structured tool-call history and execution context that keep restoration decisions traceable and explainable, while enabling context-aware operator question answering during the restoration process. Simulation results on IEEE 30-bus and IEEE 57-bus systems show that the proposed framework achieves observability recovery comparable to a mixed-integer linear programming (MILP) solution, while providing tool-grounded explanations, interactive operator support, and human-overseen execution.

0.23

Integrating Agentic Artificial Intelligence with High-Performance Computing for Grid Planning

eess.SY ·2026-09-03 ·Samim Konjicija, Slaven Peles
published similarity 0.65
Abstract · 6 pages, 3 figures, 3 tables. To appear in proceedings of EnergyCon 2026

We present AgentiGrid, an agentic artificial intelligence (AI) framework that integrates large language models (LLMs) intelligence and high-performance computing (HPC) to streamline and accelerate the multi-scenario power flow studies. AgentiGrid is an autonomous decision-making agent that proposes parameter modifications, invokes analyses through HPC analysis toolkit ExaGO, interprets results, and determines subsequent actions. ExaGO provides multiple power flow applications that can perform deterministic, stochastic and security constrained optimal power flow analyses. AgentiGrid provides backends to multiple LLMs (OpenAI, Anthropic, Ollama, and Ollama cloud) augmented with context specific and task specific prompts. Key features include interactive mid-search steering, goal-type-aware post-search analysis, and concurrent variant exploration for power flow optimization. A Streamlit-based graphical launcher provides real-time visualization of iteration progress and generates reports in natural language. AgentiGrid is capable of autonomously converging transmission constrained alternating current optimal power flow in under 20 iterations, with near-perfect reliability

0.25

B2G-Agent: An LLM-Based Multi-Agent Tool for End-to-End Building-Grid Interactions

cs.HC ·2026-11-14 ·Xueyuan Cui, Qian Zhang, Xiaochen Liu, Yi Wang
code/data similarity 0.61
Abstract

Buildings are major electricity consumers and can interact with distribution network dispatch through flexible power scheduling. These interactions require distribution network operators (DNOs) and building energy managers (BEMs) to reconcile their operational constraints and perform complex cross-field computations. The lack of cross-domain expertise and unified computational workflows could lead to inefficient or physically infeasible interactions. To address this bottleneck, we develop an end-to-end large language model (LLM)-based multi-agent tool, B2G-Agent, that bridges DNOs and BEMs. The tool deploys three collaborative agents: a Translator for bidirectional cross-domain semantic mapping via hybrid retrieval-augmented generation (RAG); an Actor for automated configuration and execution of joint simulation and optimization through directed acyclic graphs; and a Reviewer for memory-augmented reflective failure diagnosis. This workflow abstracts away cross-field modeling complexities and enables both sides to focus on high-level operational decisions. Comprehensive evaluations across 200 synthesized tasks show that B2G-Agent improves the interaction quality score from 66.71 to 85.57 and increases the task success rate from 38.0% to 69.0% over the baseline while satisfying operational constraints. The open-source tool and interface are available at https://github.com/hkuedl/B2G-Agent.

0.41

AgentiGrid: Agentic AI for Steady State and Transient Studies

eess.SY ·2026-11-11 ·Eve Tsybina, Selma Grebovic, Samim Konjicija, Kaleb Brunhoeber, Slaven Peles
similarity 0.60
Abstract · 3 figures, 1 table

As power systems worldwide struggle to meet in- creasing loads or higher penetration of inverter based resources, dynamic studies become of increasing importance. The rise of artificial intelligence (AI) capabilities allows to automate some of these resource intensive studies. Coupled with parallel computing, AI is a promising technology to conduct transient and stability studies on an unprecedented scale. This study provides a proof of concept agentic AI capable of parallel or sequential execution of phasor domain studies for a 10,000 bus system. The agent first executes a standalone simulation of a three phase symmetric fault and then executes a series of actions, by first adding a large load to a bus and then applying the fault to the same bus to stress the system. The results of the agentic simulation are consistent with human counterfactual across four vendor backends.

0.35

An Agentic Framework for Automated Power System Studies and Grid Connection Assessment

cs.AI ·2026-11-02 ·MaoXun Huang, Kshitij Kapoor, Eli Louise
benchmark similarity 0.57
Abstract · 8 pages for the main paper with 6 pages for Appendix

Connecting new generation and demand to the grid depends on two scarce skills: checking applications against a large, changing body of regulation, and running the network studies that decide where and how a project connects. We present Grid Agents, an AI system that brings both together, and the methodology we use to evaluate it. The Grid Ontology is its knowledge system. It represents the regulation, standards and engineering knowledge that grid work depends on, makes it searchable, and evolves as the agents learn from use. Every answer drawn from it rests on evidence the agents cite. Grid Studio is an agent system specialised for power-system engineering. It works in its own engineering environment with domain tools and a study framework, draws on the Grid Ontology, and relies on established solvers for every number it reports. In both, engineers make the decisions. We bring eight published power-system benchmark families, previously scattered across separate papers, into one suite of 519 tasks, and we verify not only each answer but the work behind it, by replaying the agent's tool calls. The Grid Ontology cites the right regulatory evidence more often than a general coding agent or retrieval pipelines, leads on LegalBench-RAG and ranks first on the public leaderboards of the Enterprise RAG Challenge and ViDoRe V3. Grid Studio scores highest on the 519 power-system tasks and is the fastest of all the systems we compare, both by a statistically significant margin. With an optimiser in the loop, its reinforcement packages cost 33-67% less on average than those the agent designs alone.

0.11

Skill-Based AI Agents for Power-System Studies

eess.SY ·2026-09-30 ·Pavel Etingov, Shuchismita Biswas
similarity 0.57
Abstract · submitted to 2027 IEEE PES Grid Edge Technologies Conference & Exposition

This paper describes a skill-based agentic framework for power-system studies using Model Context Protocol (MCP)-connected engineering tools. A custom MCP server was developed to expose Siemens PTI PSSE functions for power-flow analysis, dynamic simulation, result extraction, and model-validation workflows. Two implementation pathways built on a programmable OpenAI Agents software development kit (SDK) and a Claude Code command-line interface (CLI) were evaluated, both using reusable skills, subagents, MCP tools, data-repository connections, and local shell/Python execution. Both frontier-model-based implementations successfully executed representative study tasks. Success was evaluated based on task completion, output accuracy, and the need for human expert interventions. Results based on public datasets show that agentic systems can greatly accelerate power system dynamic simulation process for transmission planning studies leveraging industry-grade simulation platforms. This points toward a shift in transmission planning practice, where agentic systems could handle routine simulation setup and result extraction, allowing engineers to focus expert judgment on scenario design and interpretation rather than tool operation.

0.22

TuneBench: Benchmarking AI Agents for Power System Dynamic Model Calibration

eess.SY ·2026-11-03 ·Andrea Pomarico, Salvatore Tessitore, Giorgio Giannuzzi, Alberto Berizzi
benchmarkcode/data similarity 0.56
Abstract

Large Language Model (LLM)-based agents can automate complex engineering workflows by interacting with tools, interpreting feedback, and making iterative decisions. This paper introduces TuneBench, a benchmark for evaluating Agentic AI in power system dynamic model calibration, where controller parameters are adjusted to reproduce target dynamic responses. The benchmark reflects a common Transmission System Operator (TSO) practice, in which equivalent models used for Dynamic Security Assessment (DSA) are calibrated against measurements from grid-code compliance tests when proprietary models are unavailable. Two cases of increasing complexity are considered: the governor and Automatic Voltage Regulator (AVR) of a synchronous generator and the control system of a Battery Energy Storage System (BESS), both tuned against active-power and voltage step tests within a budget of 15 simulations. LLM-based agents are compared with random search and Genetic Algorithm (GA) baselines over 10 independent runs. Only the most advanced models, Opus 5.5 and GPT-6, accurately reproduce all target trajectories, with median R2 above 0.995 in every test and tracking errors up to two orders of magnitude lower than the baselines. The agent logs show that these agents autonomously extract dynamic performance indices, such as settling time and damping, and relate them to specific control parameters, decomposing the tuning problem into physically interpretable sub-problems. The benchmark is publicly available at https://github.com/Power-Agent/PowerAgentBench/tree/main/benchmarks/dynamic/level3.

0.42