CS Paper Radar

Computed Permutation Trellis Coding: Near-Optimal Quantization from Two Multiplications and a 64-Byte Table

Muhammed Fatih Balın

cs.IT cs.AIcs.ARcs.LG ·submitted 2026-11-17 00:17 UTC · v1
hot direction

Abstract

We propose Computed Permutation Trellis Coding (CPTC), a low-bit quantization format for tensors written once and read many times. Formats that round each value on its own, such as INT4 and FP4, waste a large part of their bits against the information-theoretic ideal. Trellis codes recover this loss by encoding values jointly, but prior decoders either need a large lookup table for their best quality or compute values with a hash that restricts what they can decode. CPTC's decoder multiplies its state by two coefficients and adds the top bits of the products to index a 64-byte table. Because that sum is not uniformly distributed, the rarely used ends of a small table can hold values far out in the tails. One decoder serves every bit width from 1 to 6, reproduces the standard integer and floating-point formats exactly, and comes within 0.07 bits of the ideal at 4 bits. It matches a random-permutation trellis code whose table is thousands of times larger, and exceeds every QTIP codebook. In LLM weight quantization without fine-tuning, CPTC has the lowest KL divergence to the unquantized model at every tested bit width on Llama 3.1 8B and 70B Instruct against QTIP's codebooks (by up to 27%). The decoder has been built into the AWS Trainium 4 AI accelerator, where it runs at the throughput of the native FP4 and FP8 formats for a negligible fraction of the systolic array's area. Fused encoding kernels quantize an 8B model's linear layers in under two minutes on one GPU and, in cycle-level simulation, on one Trainium 4 chip.

Comment
38 pages, 6 figures, 27 tables

Closest papers

Nearest neighbours by meaning across the whole index.

TQIR: Trellis Quantization with Integer Reconstruction for Bandwidth-Efficient Edge LLM Acceleration

cs.AR ·2026-11-11 ·Kuang-Ting Huang, Tian-Sheuan Chang
similarity 0.71
Abstract · submitted to IEEE transactions on circuits and systems for AI

Autoregressive large language model (LLM) inference is often limited by external-memory bandwidth, while existing ultra-low-bit trellis quantization reconstructs floating-point weights and leaves runtime Hadamard-transform and decoder costs unresolved. This paper presents TQIR, an algorithm--hardware co-design that decouples storage precision ($S$) from decoded-weight ($W$) and activation ($A$) compute precisions, enabling a better accuracy--hardware trade-off. TQIR performs trellis matching with floating-point candidates offline while constraining each candidate to an INT8 or INT4 codeword that can be reproduced exactly for integer GEMM at runtime. To reduce transform cost while preserving the integer weight path, TQIR relocates the reverse Hadamard transform to the activation side and employs an $H_{128}$ Subspace Hadamard Transform, together with a subspace-aligned $128\times2$ trellis tile that preserves the original 256-weight sequence length. The configurable decoder, synthesized in a TSMC 16-nm process, delivers 307.2~Gweights/s in 0.0509~mm$^2$ and achieves 13.93$\times$ and 1.52$\times$ the normalized decoder-area efficiency of Ecco and Codeword Decomposition, respectively. These results show that fixed-rate trellis compression can reduce weight traffic while sustaining an integer-GEMM datapath matched to the evaluated memory and PE rates.

0.05

Tetra: Serving Leech-Lattice Quantized LLMs at 2.7 Bits per Parameter

cs.LG ·2026-09-28 ·Pier-Jean Malandrino
code/data similarity 0.68
Abstract · 15 pages, 4 figures, 8 tables. Code, measurement logs and preregistrations: https://github.com/pjmalandrino/llvq

Leech-lattice quantization gives good quality at two bits per weight, but its codebooks hold more than 10^14 points, too many for a lookup table. Our earlier kernel expanded the codes at load time and read 4.804 bits per weight from GPU memory for 2 bits of code. We present Tetra, a new codebook on the same lattice. A 24-weight block still takes 48 bits, most of which index a 64-state trellis of the Golay code and one shared 16 KiB table. The kernel decodes a block with six table loads and two small lookups inside the matrix-vector product, and reads 2.148 bits per weight. For full models, we retrain one scale per matrix row, store the matrices that lose the most as 4-bit integers, and pay for them with 4-bit embedding tables. Our Qwen3-4B, 8B and 14B files hold 2.73, 2.70 and 2.73 bits per parameter over the whole model. They score 63.37, 69.58 and 75.66 on the full MMLU test set, 4.76, 4.21 and 2.46 points below 4-bit AWQ at 5.3 to 6.0 bits per parameter. They generate 113.8, 95.0 and 57.2 tokens per second in our engine. On GSM8K, through the served kernel, they lose 9.63, 4.62 and 3.26 points to FP16. At 4B our file scores 23.6 points above llama.cpp's IQ2_XXS (2.48 bits per parameter). Every number we measured for a table or figure comes from one NVIDIA L40S GPU. We preregistered the main experiments.

0.33

Extreme Compression of Per-Layer Embeddings via Cross-Layer Latent Vector Quantization

cs.LG ·2026-10-22 ·Jiacheng Liu, Yaxin Luo, Xiaohan Zhao, Peng Sun, Xinyi Shang +3 more
code/data similarity 0.67
Abstract · Code at https://github.com/VILA-Lab/optic

Scaling embedding capacity alongside Transformer computation is an emerging trend in language models. This trend makes high compression rates increasingly useful. Hence, we study extreme compression of Per-Layer Embeddings (PLE), which follow this trend and account for 35.2% of the parameters of Gemma 4 E4B. At such rates, conventional quantizers give each token-layer vector its own code of only a few bytes. We instead develop OPTIC (Output-Path-fitted, Token-shared Indexed Codes), which stores one quantized code tuple per token and decodes it at every layer with a layer-specific affine decoder. Codes and decoders are fitted to the PLE output path rather than to the stored vectors. At about $100\times$ PLE compression of bfloat16 (BF16) E4B, OPTIC retains an aggregate 97.8% of the uncompressed model's performance across seven benchmarks, whereas product quantization, the strongest of six conventional baselines, retains 66.3%. At $594\times$ and $1,002\times$ PLE compression of BF16 E4B, OPTIC retains 90.5% and 84.1%. On the official E4B release with 4-bit linear weights and 16-bit activations (W4A16), OPTIC retains 96.9% at about $100\times$ PLE compression. During inference at about $100\times$ PLE compression, BF16 E4B uses 29.7% less GPU memory than with uncompressed PLE at the same key-value cache size, while running at most 0.40% slower.

0.33

MiSTiQ: MicroScaling Trellis Quantization for Extreme KV Cache Compression

cs.LG ·2026-11-16 ·Ofir Gordon, Lior Dikstein, Paul Balanca, Idan Achituve, Douglas Orr +1 more
similarity 0.67
Abstract · 26 Pages, 7 Figures, 7 Tables

Modern large language models (LLMs) increasingly support longer contexts and serve more concurrent requests, increasing both sequence lengths and batch sizes. Both trends increase KV-cache size and memory traffic during inference. KV-cache quantization reduces these costs, with recent approaches using codebook-based vector quantization to achieve extremely low bit widths. However, hardware constraints limit codebook size, and most methods reconstruct the cache in higher-precision floating-point formats for attention, limiting the computational benefits of quantization. To address these limitations, we introduce MiSTiQ, a drop-in replacement for codebook-based vector quantizers that combines trellis-coded storage with microscaling (MX) formats for low-precision computation. We combine trellis quantization with beam search to encode the KV cache over large reconstruction spaces without large codebooks. To support MX computation, we derive MX-Hash functions that generate reconstruction values directly in the target MX element format. These functions use the scale-conditioned marginal distribution of block-normalized Gaussian inputs. On Llama3 and Qwen3, MiSTiQ achieves lower WikiText perplexity and higher GSM8K accuracy than the evaluated baselines across several block-scale formats at approximately 1.25 effective bits per element. With NVFP4, it also achieves the highest LongBench average on both models.

0.27

BitDecoding-FP4: Native FP4 KV Cache Decoding via Algorithm-System Co-Design

cs.AI cs.ARcs.CLcs.PF ·2026-11-06 ·Dayou Du, Woon Yee Ng, Guangming Sheng, Nick Lau, Jianyi Cheng +1 more
code/data similarity 0.63
Abstract

The key-value (KV) cache dominates memory capacity and bandwidth in long-context LLM serving. While 4-bit microscaling formats (NVFP4, MXFP4) shrink the cache and run attention on FP4 Tensor Cores, a fundamental gap remains between algorithmic quantization and system-aware acceleration: existing FP4 KV systems use vanilla quantization that causes severe accuracy drops, whereas accuracy-oriented 4-bit algorithms rely on vector codebooks whose lookup overhead degrades decoding throughput. We present BitDecoding-FP4, an algorithm--system co-design for accurate and efficient native FP4 KV decoding. We mitigate three error sources: Dual-Residual Query Quantization splits queries into two FP4 tensors, cutting query logit error from 60% to 1%; Underflow-Aware Probability Scaling prevents E4M3 scales from rounding long-context probabilities to zero; and Outlier-Aware Key Quantization combines static smoothing, Hadamard rotation, and scale search to suppress key outliers under token-wise scaling. At the system level, we remove the softmax bottleneck via transposed softmax with fused probability quantization and stacked query MMA on paged KV caches. Across dense and MoE models with GQA and MLA, BitDecoding-FP4 stays within 0.5 points of BF16 KV accuracy with NVFP4 (1 point with MXFP4), and tracks BF16 KV in RL training rollouts. In end-to-end serving on NVIDIA B300 with Qwen3-4B and Qwen3-30B-A3B, it delivers 2.4-3.0$\times$ higher peak serving throughput than BF16 KV. The implementation is available at https://github.com/OpenBitSys/BitDecoding-FP4.

0.43

Shift-Accumulate Attention: Multiplier-Free Query--Key Products for Transformer Decoding

cs.AR ·2026-09-05 ·Khubaib Ahmed, Amna Noor, Ahsan Ul haq
similarity 0.63
Abstract

Power-of-two (PoT) quantisation turns a multiplication into a bit shift, so far only for the post-softmax attention--value product. The earlier and larger product, S=QK^T, has not been reformulated the same way. We quantise the key cache to a signed power-of-two fixed-point code, so that every scalar multiplication in QK^T becomes a sign flip, a bit shift and an integer accumulation. A fixed-point head-room F>= e_max turns every shift index r=F-e into a non-negative left shift, making the accumulation exact in integer arithmetic. We add a sub-power mantissa extension that halves the score error for one extra shift-add, a shift-exact online softmax whose running maximum lives in an integer log2 domain so that every rescaling is itself an exact shift, and a log-quantised AV product. Fused CUDA kernels in a 1.1B Llama decoder on an RTX 4090: at B=8, T=32k the 4-bit kernel is 4.60x faster than FP16 scaled dot-product attention with a 2.5x smaller KV cache, and batched decoding crosses over at B=64 to 1.22x FP16 throughput at 11.02 against 13.77 GB peak memory. A matched INT8 multiply--accumulate kernel on the same tiling reaches 5.29x: on a GPU with a hardware 4-way INT8 dot product, shift-accumulate is not faster than the MAC it replaces. An iso-storage control--an 8-bit shift code of exactly one byte per key, run through the identical kernel--prices the arithmetic substitution alone at 2.02x at comparable accuracy. The advantage of the PoT representation is therefore its density and the removal of the multiplier, not raw GPU throughput. A sweep over exponent width, mantissa levels, granularity and rounding gives the design lesson: nearest-PoT relative error is scale-free, so extra exponent bits buy nothing (eps_S=0.1302 at 3, 4 and 5 bits) and accuracy must come from mantissa terms.

0.16

XOR-Trellis: Ultra-Low-Complexity Dequantization and Curvature-Aware Hadamard-Free LLM Quantization

cs.LG cs.AI ·2026-09-30 ·Xiaofan Que, Nir Elkayam, Spandan Pyakurel, Shuokai Pan, Dibakar Gope
similarity 0.62
Abstract

Trellis-coded quantization enables high-dimensional compression of large language model (LLM) weights at ultra-low bit widths without the exponentially large codebooks required by conventional vector quantization. Practical deployment, however, presents two challenges: reconstructing compressed weights at sufficient parallel throughput to avoid making dequantization an inference bottleneck, and maintaining quantization accuracy without costly incoherence transformations. We address these challenges with two complementary techniques. First, we introduce an ultra-low-complexity trellis dequantizer that uses a structured, hardware-efficient state-to-value mapping while preserving diverse reconstruction choices for trellis search. Second, we reformulate discrete trellis path optimization with a curvature-aware objective that reflects model sensitivity directly in the original coordinate space. Together, these techniques enable high-quality ultra-low-bit trellis quantization with inexpensive, highly parallel runtime reconstruction and without relying on Hadamard-based incoherence processing.

0.20

User-Schedulable Approximations for Quantized Tensor Programs

cs.PL cs.LGcs.PF ·2026-11-12 ·Alex Reinking
similarity 0.62
Abstract · 52 pages (20-page body plus appendices), 5 figures, 22 tables

Quantization lets language models run on edge devices, but it sharply increases the number of tensor kernels a library must maintain: every weight format must be paired with every activation format on every instruction set and GPU, with an encoder and a decoder that agree on the stored bytes. In GGML, the tensor library used by llama.cpp, these kernels are written by hand, and only 8 of the 54 weight-activation pairs it runs on our Arm CPU have a tiled matrix-multiplication kernel. We extend Halide's separation of algorithm and schedule to the representation of values. Each approximation is a codec, an encoder paired with a decoder, composed from reusable units: quantizers, integer representations, bit packers and layouts. A new directive, approximate_by, applies a codec to one stage of a program and returns the encoder and decoder as ordinary stages that Halide can schedule, so both decoders fuse into the register tiles of a matrix product. Optional contracts, such as a round-trip law, are checked by property tests; the law exposed an inconsistent block sum in GGML's q8_1. One algorithm and one schedule library generate 347 kernels for 31 of GGML's and KleidiAI's formats on Arm CPUs and Apple GPUs, covering 38 weight-activation pairs for which GGML has no kernel, in 3.7x less code than GGML and KleidiAI. On an Apple M3 Max, our kernels reach at least 95% of the speed of GGML's format-specific kernels in 91.0% of the cases that have one, with a median speedup of 1.13x, and are faster still where GGML falls back to blocked dot products. Counting Apple's BLAS library, which is usually faster for larger f32 products, we still reach that threshold in 86.9% of CPU cases. A port to x86 with Intel's AMX adds 793 lines of code and matches GGML in 83.5% of its cases.

0.39