CS Paper Radar

ATS: Anti-Aliased Triangle Splatting with Exact Per-Primitive Integrals

Brent Zoomers, Joni Vanherck, Leander Winters, Jeroen Put, Lode Jorissen, Nick Michiels

cs.CV cs.GR ·submitted 2026-11-17 10:06 UTC · v1
theory

Abstract

Triangle Splatting represents scenes using semi-transparent triangles, but it evaluates each triangle at the pixel center and culls any triangle with an inradius smaller than one pixel. The former causes severe aliasing, while the latter culls most of the scene at lower resolutions. We show that the integral of the Triangle Splatting window over a pixel admits an exact closed-form solution. The angle bisectors split the triangle into three sub-triangles, in each of which the window is a power of the distance to one edge. Each piece therefore has a closed-form antiderivative, and Green's theorem reduces the integral and its gradients to one term per side of the sub-triangle clipped against the pixel. The integral over the whole triangle, which we show has a closed form, then allows conservative culling, removing only triangles that cannot meet the renderer's alpha cutoff at any pixel. This exact formulation anti-aliases existing models without retraining, exhibits less temporal aliasing than 2x2 supersampling, and enables multi-scale training, matching or outperforming supersampled training at reduced resolutions.

Comment
17 pages, 7 figures, 9 tables

Closest papers

Nearest neighbours by meaning across the whole index.

MeshSuite: A Unified Benchmark for Triangle- and Mesh-Based Neural Rendering

cs.GR cs.CV ·2026-09-01 ·Kaixuan Zhang, Minxian Li, Mingwu Ren, Xiatian Zhu
benchmarkcode/data similarity 0.61
Abstract

Triangle- and mesh-based neural rendering seeks to bridge neural representations and graphics engines through triangle primitives compatible with standard rasterization. Yet existing methods were developed and evaluated under inconsistent settings, with few direct comparisons and little evaluation in graphics engines. We introduce MeshSuite, the first benchmark for systematic evaluation of engine deployment and Non-Engine Render in triangle- and mesh-based neural rendering. MeshSuite evaluates two deployment settings: Standard Deployment, using an opaque mesh pipeline with vertex colors and hardware Z-buffering; and Dedicated Deployment, using method-specific engine implementations to preserve appearance and compositing features. For mesh splatting, we also audit exported surfaces for topological and geometric integrity as downstream graphics assets. Our results show that engine deployment reduces image quality in both settings; among evaluated methods, MeshSplatting degrades least under Standard Deployment. Dedicated Deployment preserves most fidelity at roughly 5-33x the runtime of Standard Deployment across two deployment datasets. For mesh splatting, explicit connectivity and shared indexing remain limited: shared vertex indexing alone guarantees neither manifoldness nor global connectivity. These findings show that rasterizability is only part of graphics readiness and underscore the need to assess engine deployment. Project page: https://x-up-lab.github.io/research/meshsuite.

0.34

ConeGaussian: Anti-Aliased Gaussian Ray-Tracing for Generic Central Cameras

cs.CV ·2026-09-11 ·Deheng Zhang, Letian Shi, Runyi Yang, Zhendong Li, Lei Sun +4 more
similarity 0.59
Abstract

In rendering, a camera is a sampling operator that maps each finite pixel to a bundle of rays. Different camera models change the geometry of this bundle, thus making a unified and faithful rendering formulation challenging. Consequently, Gaussian ray tracing supports generic cameras (with optical center) through their inverse ray mappings, yet typically reduces every pixel to a single center ray. This ignores the camera-dependent pixel footprint, causing aliasing under minification, while unconstrained Gaussians expose unsupported frequencies under magnification. We present ConeGaussian, a camera-model-agnostic anti-aliasing framework for Gaussian ray-based rendering. Instead of defining the pixel filter on a camera-specific image plane, ConeGaussian constructs an anisotropic footprint directly from neighboring rays produced by the camera's native inverse mapping. We derive a closed-form response under a locally linear, depth-local, moment-matched approximation of the finite pixel footprint, while the same geometry defines a per-Gaussian training-frequency floor. Notably, by construction, our filtering principle can be used unmodified across calibrated central camera models and multiple Gaussian ray-rendering backbones. Additionally, unlike in mip-splatting, our scene-space frequency floor and filtering enable trivial composition at render time, allowing us to remove excess blurring. On pinhole and strongly distorted fisheye captures, ConeGaussian consistently improves two distinct ray-based backbones, by up to 4.3 dB at 1/8 resolution, and reduces fisheye LPIPS by 30% where perspective screen-plane footprint formulations are not directly applicable.

0.18

Elastic Triangle Splatting

cs.CV cs.CG ·2026-08-29 ·Tian Shi, Shenhan Qian, Daniel Cremers
similarity 0.58
Abstract

While neural rendering methods such as 3D Gaussian Splatting achieve remarkable visual fidelity, traditional polygonal meshes remain the backbone of established graphics pipelines. Triangle splatting bridges this gap by optimizing triangle primitives as differentiable splats, producing representations that are closer to mesh-based workflows. Central to these methods is the kernel function that softens triangle boundaries to propagate gradients to vertex positions. Existing triangle splatting methods make inconsistent choices of kernel functions, and analysis of these kernels' optimization behavior has been limited to unstructured triangle soups for novel-view synthesis. In this work, we consider triangle splatting as a generic tool for photometric optimization, comparing kernel properties through two complementary tasks: mesh optimization for shape reconstruction and triangle soup optimization for novel-view synthesis. Along with the analysis, we introduce an elastic kernel function that features bilateral gradient support across the boundary and an adaptive boundary value, which are shown to be essential for robust optimization. Under isolated comparison, our elastic kernel outperforms existing kernels on shape reconstruction and in the majority of novel-view synthesis benchmarks, demonstrating the importance of kernel design in the effectiveness and versatility of triangle splatting.

0.26

Spaghetti Splatting: Differentiating Curvilinear Dirac Masses via Convolution

cs.CV cs.GR ·2026-11-09 ·George Shramko, Shrisudhan Govindarajan, Rudy Lam, Yizheng Xie, Daniel Rebain +2 more
similarity 0.57
Abstract · 10 pages, 8 figures, 1 table

In production systems, 3D geometry is represented by primitives such as points, lines, and triangles, as rendering hardware is optimized to generate images from them very efficiently. Learning such primitives from images by volume rendering is challenging, as they are Dirac masses defined at infinitesimal locations in space. EWA splatting, Poisson reconstruction, and 3D Gaussian Splatting overcome this by convolving Dirac masses with a low-frequency kernel, a recipe that generalizes along two axes: the kernel and the primitive. As points and triangles have already received significant attention, we investigate this recipe for curvilinear primitives, and introduce Spaghetti Splatting. We approximate curves by polylines whose convolution converges to that of the continuous curve, and volume render each segment so that connected segments composite without overcounting at their joints. For fast training and inference, we linearize the camera projection per segment, which also accommodates kernels beyond Gaussians, such as Beta kernels. As a point is a curve of zero length, our representation is a strict superset of 3D Gaussian Splatting. It remains competitive with the state-of-the-art on general scenes, outperforms methods specialized to line-like geometry, natively supports anti-aliasing, and produces long connected strands that are directly amenable to physics simulation.

0.12

GeoCache: Training-Free Acceleration of Multi-View Texture Diffusion via Geometric Delta Transport

cs.CV cs.AI ·2026-08-13 ·Haotang Li, Zhenyu Qi, Shaohan Henry Wang, Kebin Peng, Yutong Zhao +4 more
similarity 0.56
Abstract

Geometry-conditioned multi-view diffusion enables high-quality 3D texture generation, but its repeated per-view denoiser evaluations introduce substantial computational cost. Existing training-free accelerators primarily exploit temporal redundancy by reusing computation across denoising steps. In multi-view texturing, however, skipping a step also removes the cross-view interaction that continually aligns different observations of the same surface, leading to rapidly degraded consistency and fidelity. Our analysis identifies a complementary source of redundancy: although intermediate features remain view-specific, geometrically corresponding surface points exhibit transferable evolution in their predicted clean signals. Based on this observation, we introduce \gc{}, a training-free plugin that evaluates a rotating subset of anchor views and transports their geometry-aligned per-step $\xz$ updates to the remaining views. Periodic full-view computation controls accumulated error, while sampler-consistent reconstruction preserves the denoising trajectory. \gc{} requires neither retraining nor architectural modification and uses the position maps already available in geometry-conditioned texturing pipelines. Across Hunyuan3D-2.1, SyncMVD, and MVPainter, \gc{} achieves a stronger speed--fidelity trade-off than temporal caches and step reduction at operating points above $2\times$. On Hunyuan3D-2.1, it delivers a $2.21\times$ denoiser-loop speedup with an MV-LPIPS of 0.0293 and an MV-PSNR of 33.60 dB, providing the best fidelity among all tested methods above $2\times$. The same transferred configuration reaches the highest speedup and lowest FLOPs on SyncMVD, while \gc{} achieves the lowest FLOPs and best fidelity among the accelerated methods on MVPainter. These results establish cross-view geometry as an effective acceleration axis for multi-view texture diffusion.

0.04

Counting Contributions, Not Views: Occlusion-Aware Densification for 3D Gaussian Splatting

cs.CV cs.GR ·2026-10-19 ·Marcel Rogge, René Schuster, Didier Stricker
publishedcode/data similarity 0.54
Abstract · Accepted at ACCV 2026 (Oral). Includes the supplementary material as appendix. Code: https://github.com/MarcelRogge/occlusion-aware-3dgs

3D Gaussian Splatting grows a dense scene from a sparse initialization through adaptive density control (ADC), driven by per-Gaussian statistics gathered during rendering. These statistics pass a frustum-based visibility filter blind to occlusion: fully occluded Gaussians still count as observed, diluting the averaged gradient signal and suppressing densification precisely where geometry is occluded. We correct this with an occlusion-aware filter that restricts densification statistics to views in which a Gaussian actually contributes, and replace the criterion's raw view-count normalizer with an average-contribution one. Integrated into a StopThePop-based framework, the two together improve every image-quality metric over the occlusion-blind baseline on occlusion-heavy scenes (up to 6% lower LPIPS), at less than half the Gaussians a view-count normalizer requires. Under the longer schedules these large scenes require, the count stays bounded where most criteria diverge, and on smaller benchmarks our method stays competitive at a fraction of the competitors' count.

0.36

CF-Splat: Closed-Form Triangle Splatting with Mesh Priors

cs.RO ·2026-10-15 ·Yixin Fang, Liang Zhao
similarity 0.54
Abstract

Splatting-based radiance-field representations have recently gained popularity in robotic perception, enabling high-quality novel-view synthesis (NVS) through explicit scene primitives. However, existing splatting methods typically rely on iterative nonlinear optimization that jointly optimizes millions of coupled primitive parameters, resulting in substantial computation time, peak GPU memory consumption, and susceptibility to local minima. In this paper, we propose CF-Splat, a novel closed-form triangle-splatting framework for efficient scene appearance estimation over a known mesh either pre-existing or provided by upstream mapping or reconstruction pipelines. Our key insight is that, by properly formulating the problem over the given mesh geometry and calibrated cameras, the rendered pixel colors can be expressed linearly with respect to the per-vertex spherical harmonics (SH) coefficients, allowing multi-view scene appearance estimation to be formulated as a global linear least-squares (LLS) problem without the need of iterative nonlinear optimization. To guarantee a well-posed solution under uneven multi-view observation coverage, we introduce adaptive SH regularization that constrains insufficiently supported high-order SH coefficients and yields a unique global minimizer. To ensure the scalability to large-scale scenes, we develop a triangle-structured matrix-free preconditioned conjugate-gradient solver that avoids explicitly constructing the large sparse normal system while producing the same LLS solution. Experiments on diverse real-world datasets demonstrate that CF-Splat achieves competitive or superior NVS quality compared with state-of-the-art splatting methods. While, CF-Splat requires approximately 27.5-378.0 times less computation time and 1.8 times lower peak GPU memory on average than 3DGS across scenes of different scales on a consumer-grade laptop.

0.17

FixAnything: 3D-Consistent Rendering Refinement via Video Generative Priors

cs.CV ·2026-08-24 ·Khiem Vuong, Deva Ramanan, Srinivasa Narasimhan
top venuecode/data similarity 0.54
Abstract · Appearing in ECCV 2026. Project page: https://fix-anything.github.io

Rendering views using 3D scene representations such as Gaussian Splatting (3DGS), Neural Radiance Fields (NeRF), meshes, or even point clouds produces artifacts when input views are sparse or target views lie far from the input. Recent work mitigates these artifacts using diffusion-based generative priors, but is specialized to individual representations and require custom architectures or extensive retraining. We present FixAnything, a single model for fixing a wide range of rendering artifacts. It does so by repurposing a pretrained video generative model, leveraging its implicit multi-view priors with only minimal modification and lightweight finetuning. Our key insight is that even noisily-rendered sequences preserve camera motion and coarse scene structure, allowing cleanup to be formulated as video-to-video translation. To control what scene structure should be preserved, we introduce a binary mask denoting the clean pixels, enabling the model to anchor its output to high-quality inputs (e.g. training views) while refining the rest. To encourage FixAnything to produce 3D-consistent renderings that support downstream reconstruction, we use camera pose accuracy (recovered via structure-from-motion) as a reward signal for direct preference optimization (DPO). Across four distinct 3D representations, FixAnything consistently improves rendering quality with lightweight finetuning, demonstrating that a single generalist video prior can replace multiple specialist refinement pipelines. The simplicity of the framework enables immediate adoption of stronger future video models without architectural redesign.

0.64