CS Paper Radar

Guarded Swarms in the Loop: A ROS 2/PX4 Digital Twin for Hybrid Digital-Analog Coordination of UAV/UGV Swarms

Uwe M. Borghoff, Paolo Bottoni, Luca D'Aurizio, Remo Pareschi

cs.CR cs.MA ·submitted 2026-11-17 13:40 UTC · v1

Abstract

Swarms of unmanned aerial and ground vehicles (UAV/UGV) operating in contested environments cannot rely on software alone for physical safety, since the software stack and its networks are part of the attack surface. The Guarded Swarms architecture addresses this by pairing a digital coordination layer, built on Topic-Based Communication Space Petri Nets (TB-CSPN), with an independent analog safety layer that can veto unsafe actuation commands. So far, the architecture has been specified and argued for, but not executed. We present the first executable instantiation of Guarded Swarms as a digital twin built on ROS 2, the PX4 autopilot in software-in-the-loop mode, and Gazebo, with two UAVs and one UGV in a coastal counter-UAS scenario. The TB-CSPN transition chain, from multi-modal sensing through human authorization to vehicle tasking, is mapped one-to-one onto ROS 2 nodes, and the analog layer is modeled as a per-vehicle Virtual Safety Board that gates every command. Eight groups of experiments show that the three negative guarantees of the architecture (no mission from conflicting, temporally incoherent, or unauthorized evidence) hold at three distinct stages of the chain in all 60 counterfactual runs; that threat confirmation is bounded by the narrowest sensing modality; that the safety layer exercises its full modeled envelope independently of the coordination layer; and, under fault injection, that it prevents every collision caused by a forged mission or a compromised worker once its veto is enforced by an independent gate, whereas a veto left to the compromised worker prevents none. The twin also exposes implementation-level hazards that the architectural specification does not address, and it draws an explicit line between the properties that simulation can validate and those that only hardware can.

Comment
10 pages, 1 figure, 7 tables. Submitted to ICMCIS 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Sensor-Driven Mission Synthesis for UAV/UGV Swarms: A TB-CSPN Coordination Architecture with Hardware-Enforced Safety

cs.AI eess.SY ·2026-08-14 ·Uwe M. Borghoff, Paolo Bottoni, Remo Pareschi
similarity 0.77
Abstract · 15 pages, 4 figures

This paper presents a coordination architecture for heterogeneous UAV/UGV swarms that synthesises mission actions from uncertain, multi-modal sensor evidence while preserving hardware-enforced safety at the actuation boundary. The approach combines radar, RF, acoustic, and visual observations with Topic-Based Communication Space Petri Net (TB-CSPN) orchestration to support incremental mission formation under partial and evolving information. Consultant agents transform sensor outputs into temporally bounded semantic tokens, while supervisor agents provide authorisation and policy-governed release of mission transitions. This separation between interpretation, coordination, and execution yields auditable decision paths, constrains non-determinism within the coordination layer through guards and synchronisation, and enables bounded-time integration of heterogeneous evidence. To improve resilience in contested environments, including cyber compromise, spoofing, jamming, and communication loss, the digital coordination layer is complemented by independent analogue safety envelopes that clamp or veto unsafe actuator commands issued to individual vehicles. A coastal-surveillance case study illustrates how the proposed architecture enables dependable, governed, and physically safe swarm coordination under operational uncertainty.

0.10

A Safety-Driven Architectural Framework for Fail-Operational Drone Swarms in Critical Missions

eess.SY cs.MAcs.RO ·2026-08-21 ·Luiz Giacomossi, Zafer Yigit, Marwan Shakarna, Shoaib Saleemi, Ivan Tomasic +2 more
published similarity 0.66
Abstract · 10 pages, 7 figures. Accepted for presentation at the 45th AIAA/IEEE Digital Avionics Systems Conference (DASC), Orlando, FL, USA, 2026. \c{…

The certification of Unmanned Aerial Vehicle (UAV) swarms for safety-critical operations requires verifiable design assurance. Airworthiness standards demand deterministic reliability, whereas multi-agent coordination algorithms execute non-deterministic models. This paper proposes a mixed-criticality architectural framework that applies SAE ARP4754B methods to swarm reconfiguration. First, a hardware-isolated Safety Monitor functions as a Run-Time Assurance (RTA) gateway, decoupling the flight-critical core from the non-deterministic Swarm Manager. Second, the monitor enforces formal safety contracts based on agent Health Vectors derived systematically from a Functional Hazard Assessment (FHA). Third, the framework propagates these Health Vectors to the collective planner to trigger fail-operational task reallocation, enabling intelligent swarm behaviors without compromising flight-critical isolation. Markov reliability modeling demonstrates that the $10^{-7}$ failures per flight hour Hazardous target is theoretically achievable for our SAIL IV scenario, provided the Safety Monitor meets $C_{monitor}>0.9991$, consistent with DAL B CMD/MON implementations.

0.28

Robust Safety Assurance for Robotic Swarms Using Decentralized Collision Verification

cs.RO cs.MAeess.SY ·2026-10-31 ·Grant Phillips, Hoang-Dung Tran, Justin M. Bradley
top venuecode/data similarity 0.64
Abstract · Accepted version. Published in IEEE Transactions on Aerospace and Electronic Systems, vol. 62, pp. 9706-9717, 2026. 13 pages, 6 figures, 4 t…

In this paper we present the methodologies, results, and analysis used to deploy a decentralized safety verification algorithm on a robotic swarm to prevent collisions at runtime in an outdoor environment. Typically, approaches toward verification of swarms of cyber-physical systems (CPS) are evaluated solely in numerical simulations or in highly controlled, noiseless indoor environments. Our efforts to implement collision avoidance on a real swarm system outdoors have revealed that the underlying algorithmic assumptions juxtaposed against the implementation details of the target system are critical factors in a method's efficacy in the real world. Here we modify, enhance, and analyze a decentralized reachability-based method for collision avoidance on a size, weight, and power-constrained uncrewed aerial vehicle (UAV) swarm with the objective of illustrating the challenges of real-world CPS deployments as well as provide guidance for researchers in this space. Verification performance, resource utilization, and timing data were gathered over the course of 140 total outdoor vehicle flights, including 6 swarm flights composed of 8 UAVs, and used to improve collision-avoidance performance as experimentation progressed. Our extensive experiments show that the proposed decentralized runtime verification approach can efficiently verify the safety of multiple UAVs in real-time and help all agents take safe actions to avoid collisions. On average, each agent, using our open-source safety_checker library, takes approximately 500-520 ms to verify its safety for the next 4 s into the future, in which the reachable set broadcast time dominates the total verification time (~300-500 ms).

0.60

SwarmNxt: Open-source Software-Hardware Platform for Fast and Agile Aerial Swarms

cs.RO ·2026-09-10 ·Charbel Toumieh, Niel Mistry, Benjamin Jarvis, Simon Jeger, Peize Liu +2 more
code/data similarity 0.64
Abstract

Aerial robot swarms have the potential to transform time-critical safety, security, and search-and-rescue operations. By coordinating multiple robots, they can rapidly survey disaster sites, map collapsed or GPS-denied environments, and search cluttered areas faster than a single robot, reducing response times and minimizing risks to first responders. Realizing this potential, however, requires robust autonomous swarm navigation, which remains an active research challenge. Progress is further constrained by existing platforms, as commercial drones are often closed-source or lack the onboard computational resources needed for agile, vision-based collective flight. Moreover, developing, deploying, and maintaining software across multiple aerial robots requires significant engineering effort. To address these challenges, we present SwarmNxt, an open-source software platform built on the open-source OmniNxt drone hardware. SwarmNxt provides an end-to-end toolkit, including detailed hardware assembly instructions with a video tutorial, automation tools for parallel software deployment and swarm-wide updates, and a ROS 2-based framework for autonomous navigation. The platform integrates state-of-the-art control, planning, and depth estimation into a single ROS 2 multi-agent system, providing an open research infrastructure for physical swarm experimentation. We validate SwarmNxt through two real-world experiments: a six-drone swarm performing decentralized planning with high-speed inter-drone collision avoidance, and a four-drone swarm executing collective flight with onboard depth estimation in an obstacle-filled environment. Both experiments were run indoors with global position from external motion capture; perception, planning, and control run onboard.

0.33

Designing, Deployment and Field Testing of C2Stack for Networked Intelligent Software-Defined UAVs

eess.SY ·2026-08-28 ·Maxwell McManus, Zhaoxi Zhang, Sidharth Santhi Nivas, Yuqing Cui, Prem Sagar Pattanshetty Vasanth Kumar +6 more
top venue similarity 0.62
Abstract

Unmanned Aerial Vehicles (UAVs) are emerging as critical enablers of next-generation wireless networking and autonomous systems. Despite their potential, deploying and testing networked UAV systems in real-world environments remains challenging, largely due to the absence of well-developed, end-to-end, ready-to-use protocol stacks. To fill this gap, we present C2Stack, a configurable protocol stack and experimental framework designed for real-time control, evaluation, and optimization of UAV networks. C2Stack incorporates a modular control plane, referred to as the~C2Stack Network Operating System (CNOS), alongside a programmable data plane that exposes APIs for cross-layer algorithm development, digital twin integration, and autonomous swarm control. In this article, we share our experience with the deployment and testing of C2Stack. We implemented C2Stack on a custom UAV swarm platform that integrates multiprocessor system-on-chip (MPSoC) radios with Intel NUC computing modules, enabling interoperability with various RF front ends. Field trials were conducted in both netted environments and large-scale outdoor test ranges, focusing on two representative use cases: (i) network utility maximization through online reinforcement learning, and (ii) collaborative interference source localization. The experiments demonstrate the feasibility of real-time, data-driven optimization in dynamic aerial environments, while also revealing practical challenges in field deployments of networked UAV systems, including power constraints, sensing limitations, and deployment logistics. We have made C2Stack source code available to the community under the MIT License, with the goal of establishing it as a foundational framework for experimental research on intelligent networked aerial systems.

0.37

Defense-in-Depth at the Perception-Reasoning Interface of LLM-Centric Agentic UAV Swarms

cs.CR cs.MA ·2026-10-02 ·Mohammadhossein Homaei, Yousef Emami, Sajad Homayoun, Rahim Taheri, Hao Zhou +2 more
similarity 0.60
Abstract · 14 Pages, 7 Tables, 4 Figures

Large Language Models (LLMs) increasingly support Uncrewed Aerial Vehicle (UAV) swarm operations such as data collection scheduling, where the model reads structured sensor reports and decides which sensors to visit. An adversary who quietly manipulates those reports can redirect the swarm without modifying the model weights or the UAV. Defenses for this interface have been proposed architecturally but rarely implemented or evaluated. We implement and evaluate defense-in-depth at the perception-reasoning interface of LLM-Centric Agentic UAV Swarms. Five layers check the provenance of a report, whether its values are physically admissible, whether they agree with what swarm geometry and service history predict, whether the resulting schedule starves any sensor, and, when these fail, hand control to a deterministic scheduler that ignores the suspect input. We test each layer against an adversary strong enough to defeat the layer before it. For each of the three input-side layers, we derive in closed form how far a report can be distorted before that layer reacts, fixing each boundary from deployment parameters before any attack data is collected; across thirty matched simulation runs, predicted and measured boundaries agree. Separating attack detection from response is a well-established principle, and we quantify the cost of neglecting this distinction at the perception-reasoning interface. When the system rejects a report, it replaces it with the most recent accepted report. This prevents the adversary from controlling the UAV schedule, but it also increases cumulative cost by 79% and 74% for the two detectors, respectively, compared with the undefended system. The safety check does not detect any attacks, but it nevertheless reduces the attack-induced cost by 37.5%.

0.26

UAV-SwarmAgent: Scalable Multi-UAV Reconnaissance and Task Allocation via Code Generation and Vision-Language Reasoning

cs.RO ·2026-10-23 ·Oleg Sautenkov, Yasheerah Yaqoot, Muhammad Ahsan Mustafa, Grigorii Kalinin, Chih-Yung Wen +1 more
similarity 0.58
Abstract

Supervising a multi-UAV reconnaissance mission usually means plotting waypoints and watching every drone. We present UAV SwarmAgent, a hierarchical multi-agent system in which an operator states the mission in one natural-language sentence and a ground-station agent writes and executes code that turns it into per-UAV routes. The agent grounds inspection targets in an aerial map with a vision-language model, splits them among N UAVs by balancing route length, and dispatches worker agents that verify incidents with a compact onboard decision model. In simulation over 4 incident types and 3 foundation models, the swarm located the incident in 244 of 255 missions (95.7%). A paired scaling study with one to 5 UAVs shows that flight time follows an Amdahl-type law. The second UAV delivers half of the attainable saving and the speedup is bounded at 1.52x. We discuss what this predictability, and the false alarms we observed, imply for an operator who supervises the swarm, and outline the user study needed to test it.

0.08

Model-Based Systems Engineering Framework for SysML-Driven Design of Autonomous UAVs

cs.RO ·2026-08-10 ·Deekshitha Angadi, Naveena Budda, Vikas Agarwal, Mohamed Samshad, Bharath Kumar Suryadevara +1 more
published similarity 0.58
Abstract · Accepted for presentation at the 2026 International Conference on Autonomous Aerial Vehicles (ICAAV-2026), 20-21 Aug 2026, Bengaluru, India

Autonomous Unmanned Aerial Vehicles (UAVs) are complex cyber-physical systems that require the coordinated integration of flight control, navigation, perception, communication, power management, and mission-level decision-making under safety, timing, and reliability constraints. However, many autonomous UAV development workflows still rely on document-centric requirements, separated architectural descriptions, and software implementation artifacts, which can lead to ambiguity, interface inconsistencies, and weak traceability during early design. This paper presents a Model-Based Systems Engineering (MBSE) design framework for the SysML-driven development of autonomous UAVs. The proposed framework uses the Systems Modeling Language (SysML) as a formal design backbone to structure UAV development across four connected layers: stakeholder requirements, functional decomposition, logical architecture, and physical/software allocation. SysML requirement diagrams, activity diagrams, block definition diagrams, internal block diagrams, state machine diagrams, and parametric diagrams are used to capture the functional, structural, behavioral, interface, and performance aspects of the UAV system. The logical architecture is then systematically mapped to a Robot Operating System 2 (ROS 2) software architecture by relating SysML blocks to ROS 2 nodes, flow ports and connectors to topics, request-response interactions to services, and goal-oriented behaviors to actions. The framework is illustrated at the design level using representative autonomous UAV mission scenarios, including autonomous take-off, waypoint navigation, hover stabilization, obstacle avoidance, return-to-home, and emergency handling. The resulting model supports requirement allocation, interface definition, subsystem responsibility assignment, and verification planning before simulation or physical deployment.

0.19