CS Paper Radar

Authenticating IoT Data on Ethereum after Pectra and Fusaka: A Cost Study of Signature Schemes, Batching and Anchoring for Agricultural Supply Chain Finance

Ming-Fong Sie, Jian-Hong Chen, Gwan-yen Lin, Yen-Shuo Chen, Shih-wei Liao

cs.CR cs.DC ·submitted 2026-11-18 03:19 UTC · v1
benchmarkcode/data

Abstract

Blockchain-based supply chain finance can turn the sensor-recorded production history of smallholder farms into verifiable credit evidence, but only if every record is authenticated and anchored at a cost that scales to large device fleets. Ethereum's 2025 Pectra and Fusaka upgrades changed this cost landscape: they added precompiles for BLS12-381 and P-256, repriced calldata and MODEXP, and capped transaction gas at $2^{24}$. We organize the authentication and anchoring of IoT records into three trust levels, from posting a Merkle root through a trusted aggregator to verifying every device signature on-chain, and implement four replay-protected signature designs: ECDSA over secp256k1 and P-256, BLS aggregate signatures with on-chain hash-to-curve, and a pseudonymous identity-based signature with batch verification. Measured as signed transactions under the rules before and after both upgrades, the upgrades mainly changed which designs are feasible, not their cost. Batching and Merkle anchoring cut the cost of ECDSA authentication sixfold, to 8,963 gas per record, and secp256k1 ECDSA remains the cheapest authenticated design: P-256 costs 1.6 times as much, the identity-based design 2.7 times and BLS aggregation 3.9 times, dominated by on-chain hashing to the curve. One transaction carries at most 1,754 ECDSA-authenticated records but only 411 BLS-aggregated ones. On a Raspberry Pi Zero 2 W, pairing-based signing takes 5.7 ms against 0.29 ms for ECDSA. Pairing-based designs pay off only when the application needs their additional properties, and the identity-based design adds key escrow at the key generation centre. The benchmark harness is released for reproducibility.

Comment
22 pages, 4 figures, 6 tables. Code and data: https://doi.org/10.5281/zenodo.24328819

Closest papers

Nearest neighbours by meaning across the whole index.

Post-Quantum Authentication of IoT Data on Ethereum: Signatures, the Calldata Floor, and Device-Signed Merkle Roots

cs.DC ·2026-11-05 ·Ming-Fong Sie
code/data similarity 0.71
Abstract · 19 pages, 4 figures. Code and data: https://doi.org/10.5281/zenodo.23970176

Field devices deployed today will still be producing records when quantum computers may break their signatures, so systems that anchor IoT data on blockchains need a post-quantum (PQ) authentication path now. We measure its cost on Ethereum under the current execution rules, including the EIP-7623 calldata floor and the EIP-7825 transaction cap, and under the calldata repricing scheduled for the Glamsterdam upgrade. We combine device-side measurements of ML-DSA, Falcon, SLH-DSA, LMS and XMSS, reproduced costs of open-source Solidity verifiers, a new standard-compliant LMS/HSS verifier for SHA-256 and SHA-256/192, and complete transactions on an Osaka-rule EVM, priced with today's verifiers and with proposed precompiles. Three results stand out. Signing every record costs 8.7 times as much as ECDSA even with an ML-DSA precompile, because the calldata floor rather than verification sets the price. When each device signs a Merkle root over 100 records, a standard LMS verifier available today costs about 3,350 gas per record, against 245 gas for ECDSA in the same design, and it is unaffected by the scheduled repricing, which raises floor-bound designs by up to 1.9 times. With the proposed precompiles, ML-DSA-44 costs 1,031 gas per record, and a hybrid ECDSA and ML-DSA signature adds only 2.5%. Post-quantum device authentication is therefore deployable on Ethereum without protocol changes, provided that the latency of batching and the data-availability properties of the chosen variant fit the application.

0.36

Transparent Identity Verification Approach Using MPC and Efficient Credential Status Handling

cs.CR cs.ET ·2026-09-12 ·Istiaque Ahmed, Shoji Kasahara, Kentaroh Toyoda, Tadashi Nakano, Thi Hong Tran
similarity 0.61
Abstract · We will run more experiment and validate more to produce quality research work

A secure and privacy-preserving identity verification process is essential for digital ecosys- tems. Current eKYC frameworks that rely on Zero-Knowledge Proofs (ZKPs) face high computational cost, rigid circuit design, complex integration, and expensive on-chain verification. The W3C 2021 BitString- based credential status mechanism also suffers from inefficient updates and poor scalability in large- scale deployments. We propose a transparent and cost-effective identity verification framework based on Multi-Party Computation (MPC). It enables private off-chain code execution and produces runtime proofs anchored to a blockchain. The framework introduces a multidimensional bit-matrix model with efficient compression. Using ZSTD, the credential data is reduced to 76 bytes compared to 140 bytes with GZIP, cutting storage and bandwidth costs. The system also supports fine-grained status updates and Layer-2 blockchain anchoring for tamper-evident, low-cost verification. The system employs reusable verifiable presentations (VPs) with unique access tokens, enabling cost-free verification and stronger access control. Selective disclosure preserves user control and strengthens privacy. Finally, the system integrates SHA3 hashing and Falcon post-quantum signatures. This guarantees robustness against quantum attacks, transparency, and scalability. It is a future-proof solution for national-scale identity verification, as demonstrated by experimental findings and security studies that validate its robustness and applicability.

0.13

AMORT-V1: Checkpointed Post-Quantum Attestation for Industrial Controllers

cs.CR ·2026-11-05 ·Rishabh Das, Gerald Agendia, Jibriel Adjei, Ahmed Oun
similarity 0.58
Abstract

Programmable logic controllers often remain deployed for decades, making post-quantum attestation a long-term requirement. Prior measurements of OpenPLC attestation show that post-quantum signing can consume 88--99% of round-trip latency and that durable state can further limit throughput. We introduce AMORT-V1, a checkpointed attestation protocol that moves public-key signing and durable commitment from individual reports to periodic checkpoints. An ML-KEM epoch establishes per-device evidence keys, devices authenticate reports with MACs, and the controller commits ordered evidence through hash-chained Merkle checkpoints signed with ML-DSA or SLH-DSA. Because shared MACs do not provide transferable proof of device origin, AMORT-V1 adds a device-held disclosure chain whose keys are released after checkpoint commitment. We validate the protocol with a 27-case attack matrix, 149 differential-test vectors, and a seven-node Raspberry Pi 5 testbed with five physical OpenPLC provers. Checkpointing reduces controller cost by 90 times relative to per-report ML-DSA without durable logging and by 878 times when durable logging is required. Transferable device-origin verification costs 2.95micro sec per report, while controller-side scaling to 10,000 identities requires 6.18 micro sec and 155 octets per report. AMORT-V1 also supports rollback-resistant restart through TPM-backed monotonic state without placing durable hardware operations on the per-report path.

0.23

A Resilient Runtime-Verification Fabric for Security Monitoring of Critical Edge-IoT Infrastructure

cs.CR cs.DC ·2026-10-05 ·Nikolaos Kekatos, Marinelio Chintri, Panagiotis Katsaros, Alexios Lekidis, Tom Nianios +3 more
publishedhighly cited similarity 0.58
Abstract · 21 pages, 2 figures. Accepted at the 21st International Conference on Critical Information Infrastructures Security (CRITIS 2026)

Protecting critical infrastructure increasingly depends on continuously verifying large IoT fleets against formal security specifications at runtime. Yet the runtime-verification (RV) pipelines proposed for this task are typically single-host prototypes whose monitors read a shared log file, with no resilience to the failures such deployments incur: a crash or overload silently drops events, clock skew corrupts the ordering metric monitors require, a time-triggered "node has gone silent" property cannot fire when the network itself falls silent, and one slow consumer stalls the pipeline. Each failure is silent: the monitor keeps emitting verdicts over a corrupted view. We present RV-Fabric, a resilient delivery layer that carries the hierarchy over two brokers (MQTT for device ingest, a durable stream broker for backend delivery) and re-establishes five continuity guarantees: durable delivery under crashes, a trusted event order, progress under total silence, consumer isolation and flow control under bounded overload, each an invariant conditioned on broker durability. Above the transport, RV-Fabric makes evidence completeness part of runtime-verification semantics: every verdict carries a status (sound, degraded, incomplete or unavailable) derived from delivery gaps, retention pressure and liveness, so an incomplete stream cannot yield an unqualified all-clear. Under controlled fault injection on a containerised testbed, measured against a fault-free oracle using the real MonPoly engine, the shared-log baseline misses six of seven injected incidents, reporting each as an unqualified all-clear, whereas RV-Fabric preserves all seven; removing a delivery mechanism reintroduces silent loss, removing isolation costs only timeliness. Two published critical-infrastructure datasets, water-SCADA and IoT/IIoT, replay end-to-end.

0.59

Domain Specific Post Quantum Signatures for Blockchains

cs.CR ·2026-09-21 ·Maja Lie, Ben Marsh
position similarity 0.58
Abstract

Blockchains need more than post quantum single signer signatures. They need consensus profiled authentication objects with canonical bytes, priced invalid input rejection, stable transaction identifiers, hybrid downgrade resistance, public aggregation, merge semantics, accountable signer evidence, forward secure committee rotation, and light client consequences. We argue for domain specific post quantum signatures for blockchain roles, analogously to how hash function engineering produced domain specific primitives for hash table DoS and arithmetized proof systems. We formalize transaction authorization and quorum certificate requirements, instantiate them on Bitcoin, Ethereum, and a Sei Giga style high throughput BFT stress profile, and evaluate ML-DSA, SLH-DSA, Falcon/FN-DSA, HAWK, MAYO, SNOVA, UOV/QR-UOV, FAEST, SQIsign, LaBRADOR Falcon, Squirrel, Chipmunk, and DKKW/LeanSig. We find that NIST single signer signatures are necessary components, yet none of the current schemes is a sufficient drop in replacement for the signature layer of modern public blockchains. The missing object is a consensus ready post quantum signature profile, not another generic size table.

0.22

Merkle-Tree-Based Verifiable Public Data Auditing for Cloud Object Storage Using Smart Contracts

cs.CR cs.DC ·2026-10-26 ·Siri Reddy Tadi, K. Gangadhara Rao, M. Venu Gopalachari, C. Chetann Reddy, Jaswanth Bhimireddy
similarity 0.58
Abstract · 15 pages, 12 figures, 11 tables

Owners of data in cloud object storage cannot directly check whether the provider still keeps every object unchanged. Existing research mostly checks blocks inside files or relies on third-party auditors, and less attention has been given to checking each object against a public blockchain reference while measuring the cost. A full-data audit downloads every object and compares it with a saved hash list, which is slow and only as reliable as that list. We propose a public auditing system in which the SHA-256 hash of each object and its name forms a leaf of a Merkle tree, so the whole dataset is represented by one Merkle root. This root is stored in an Ethereum smart contract as a trusted public record, while the objects stay with the provider. An auditor downloads an object, rebuilds the root using a short Merkle proof and compares it with the stored root, marking the object as intact, modified or missing. In five experiments on an S3-compatible store and a local Hardhat blockchain (normal audit, single- and multiple-object tampering, deletion and scalability), the system detected 15 of 15 single modifications, 2,205 of 2,205 modified objects and 830 of 830 deleted objects with no false alarms. The proof needed only 14 hashes for 10,000 objects, so checking one object took about 10 ms and a 100-object sample about 150 ms regardless of dataset size, while a full audit of 10,000 objects (14.3 s) took about as long as downloading them (13.5 s). Storing the root cost 91,863 gas, 252 times less than storing 1,000 hashes on-chain. The system thus shows exactly which objects were modified or are missing, with its main savings coming from checking selected objects.

0.24

Trustless Accountable Data Sharing for Supply Chains: A Reference Architecture and MoreMedDiet Proof-of-Concept

cs.ET ·2026-08-31 ·Michal Kit, Montassar Naghmouchi, Maryline Laurent, Badis Hammi, Hella Kaffel Ben Ayed +4 more
similarity 0.58
Abstract

Modern supply chains are increasingly dependent on the exchange of sensitive business data between heterogeneous stakeholders who do not trust each other. %under partial trust. Conventional integration approaches typically rely on centralized intermediaries or require extensive data disclosure, which hinders collaboration, compliance, and innovation. We propose a generic reference architecture for privacy preserving, trustless data sharing in supply chains. The architecture combines permissioned distributed ledgers, IoT-based evidence ingestion, and modular privacy mechanisms to enable controlled transparency: stakeholders can extract verifiable insights and support audits while minimizing data exposure. We instantiate the architecture in the context of the MoreMedDiet project, which promotes sustainable farm-to-fork food systems and adoption of the Mediterranean diet. By mapping the MoreMedDiet use case into our architecture, we demonstrate how channel topologies, IoT-to-ledger data flows, and smart contract-based quality assurance (QA) can support secure data exchange, transparency, interoperability, and regulatory alignment. Our proof-of-concept illustrates how Self-Sovereign Identity (SSI) and W3C Verifiable Credentials (VCs) can provide portable and auditable access governance over Hyperledger Fabric channels. The resulting design offers a reusable blueprint for multi-actor supply chains, including agri-food and pharmaceutical domains. Moreover, the performance achieved -- presenting a verified credential to the next stakeholder in the supply chain in 130 ms -- is promising and demonstrates the potential applicability of the approach in real-world supply chain environments.

0.11

A BUD You Can Count On: Efficient, Verifiable Membership Proofs

cs.CR cs.DBcs.DC ·2026-09-10 ·Alejandro Ranchal-Pedrosa, Cody Littley, Ben Marsh
theorycode/data similarity 0.57
Abstract

A block typically changes only a small fraction of blockchain state, yet producing a state root makes validators update an authenticated tree spanning it all. We show how to support verifiable reads from the writes alone. We introduce Block Update Digests (BUDs), that commit to a block's writes and link each key touched in that block to its previous modification. An optional prior-value record lets one successor BUD authenticate the value between modifications, replacing the baseline's two BUD openings. SuperBUDs summarize those writes over longer intervals, letting a reader verify that a value remained unchanged without checking every intervening block. Thanks to BUDs and SuperBUDs, validators can just keep ordinary flat state while still serving proofs of current and historical values, including deletion. We prove soundness and completeness for reads at or after a key's first logged modification when the required proof data is available. In experiments with the baseline format, a 50x increase in state size raises the measured base-BUD cost by just 1.24x. In paired QMDB experiments, lowering its garbage-collection activation threshold raises process CPU time by 1.3-2.7x and device bytes written by 1.6-2.4x relative to its dormant configuration. BUD authentication requires no corresponding relocation of live entries. In the evaluated baseline, two-digest read-layer payloads stay below 800 bytes, and warm hash-path verification takes at most 146 μs at p99. Authenticated reads need not make validators maintain an authenticated tree over the entire state.

0.20