CS Paper Radar

TacPilot: Does Touch Need to Be Everywhere?

Yunzhen Zhang, Yuxiao Zhu, Jie Yang, Yufeng Miao, Bing Luo

cs.RO ·submitted 2026-11-18 04:08 UTC · v1

Abstract

Tactile feedback helps visual manipulation policies respond to local contact, but changes in tactile observations do not always require corrective motion, and sustained corrections do not always require new tactile features. We introduce TacPilot, a tactile residual framework that separates representation updates from action intervention around a frozen visual policy. TacPilot uses a perception gate to determine when tactile features need refreshing and updates only affected regions while reusing unchanged features. A separate intervention gate determines whether bounded Cartesian and gripper residuals modify the nominal visual action. This separation allows tactile perception and action correction to follow different spatial and temporal demands during manipulation. In offline expert-trajectory replay, local feature reuse reduces encoded regions by 56.4% relative to periodic full encoding, with essentially unchanged action predictions. In an exploratory simulation evaluation spanning two cylinder sizes, TacPilot succeeds in 26 of 30 trials (86.7%). We further validate TacPilot on OpenArm v2 equipped with Paxini tactile sensors across four contact-rich manipulation tasks.

Comment
10 pages, 5 figures, 2 tables

Closest papers

Nearest neighbours by meaning across the whole index.

TacPAC: Tactile Prediction and Real-Time Action Correction in World-Action Models for Contact-Rich Manipulation

cs.RO ·2026-09-04 ·Zipei Ma, Xiaofei Wei, Junzhe Jiang, Shunlin Lu, Li Zhang
code/datahighly cited similarity 0.83
Abstract

World-action models guide action generation with predicted future observations, but vision-centric predictions miss the local contact cues that decide contact-rich manipulation. However, naively predicting future tactile observations as additional views recovers only a third of the achievable gain in our experiments. This gap reflects a timing mismatch: predictions precede execution, while tactile feedback arrives during it. We introduce TacPAC, which turns tactile prediction into real-time action correction. Once the base model has planned an action chunk, TacPAC caches the predicted contact that plan was conditioned on together with the plan's own representation, and a tactile expert reads each newly observed tactile image against that cache to correct the actions not yet executed. Feedback is thus interpreted against what the plan anticipated rather than in isolation, and one correction is a single pass over that cache, $20.7\times$ cheaper than regenerating the chunk. On five real-robot tasks spanning precision insertion, fragile-object handling, object reorientation, and long-horizon manipulation, TacPAC leads every task and raises the average from 22% for its vision-only base model to 64%. Code is available at https://github.com/LogosRoboticsGroup/TacPAC.

0.52

T-WLA: Bridging Slow Vision and Fast Touch

cs.RO ·2026-10-20 ·Kaichen Zhou, Yuzhen Chen, Hannah Yao, Chonghe Jiang, Rao Fu +12 more
code/data similarity 0.82
Abstract

In contact-rich manipulation, contact conditions can change before a visual policy updates its action plan. Recomputing the plan through the visual policy adds latency, while tactile feedback alone does not specify how the ongoing motion should be revised for the task. We introduce T-WLA, a world-language-action architecture that uses shared visual memory to guide both action generation and tactile correction. At each visual update, the visual branch integrates the current image, task instruction, and retrieved history into a visual memory that conditions base-action generation. The same memory is cached for a lightweight tactile editor, which combines it with the active action chunk and incoming touch to predict residual corrections to unexecuted actions without rerunning the visual branch. Future-image and future-pressure prediction provide training-only supervision, encouraging the visual memory and tactile features to capture interaction dynamics relevant to action generation and correction. We evaluate T-WLA on tactile-conditioned hand-motion prediction using EgoTouch and Tachin, and on four real-world dexterous manipulation tasks. T-WLA reduces finger-joint MPJPE by 30% relative to the strongest reported baseline and achieves an average success rate of approximately 50.0% across real-robot manipulation tasks. Videos and code are available at https://anonymous-submission-20.github.io/T-WLA.github.io/.

0.22

ViTaR: Visuo-Tactile Residual Adaptation for Foundation VLA Manipulation

cs.RO ·2026-08-16 ·Yi Wang, Renjun Wu, Jinyan Liu, Xuesong Li
benchmark similarity 0.79
Abstract

As Vision-Language-Action (VLA) models scale toward real-world deployment, contact-rich manipulation exposes a critical blind spot: these policies encode broad visual-semantic priors yet remain unaware of local contact events, producing identical actions whether contact is established, lost, or destabilized. Existing remedies either modify VLA internals, risking catastrophic forgetting, or demand online reinforcement under near-failure contact conditions. Both grant tactile unbounded influence over action generation, conflicting with the priors that make VLAs generalizable. We introduce ViTaR, which reframes tactile feedback from an action-generating perceptual input to an execution modulator that selects and scales bounded residual corrections atop a frozen VLA, preserving pretrained capabilities by construction. ViTaR decomposes adaptation into two stages: Effect-Guided Modeling determines whether and which correction is locally justified via outcome-grounded preference evidence, and Residual Action Modulation converts this evidence into a residual choice with continuously scaled gain from real-time visuotactile observations. On the UniVTAC benchmark spanning seven contact-rich tasks, ViTaR achieves 61.3% average success, a 30.6 percentage-point improvement over its frozen VLA base that also surpasses purpose-built tactile baselines. Physical-robot experiments confirm that bounded tactile modulation transfers to real sensor noise and dynamics.

0.40

HiTac-WAM: A Hierarchical Tactile World Action Model for Contact-Rich Robot Manipulation

cs.RO ·2026-08-20 ·Chao Xue, Chaofan Zhang, Wenxuan Ma, Guocai Yao, Shaowei Cui +1 more
similarity 0.78
Abstract · 8 pages, 7 figures, and 3 tables

World action models jointly predict future visual observations and actions, whereas existing tactile-aware variants typically represent future touch as an image or latent stream without modeling the physical dependencies that organize tactile states hierarchically. We present HiTac-WAM, a hierarchical tactile world action model that forecasts a sequence of future tactile states for each candidate action chunk before execution. The forecast factorizes into contact state, a 3D deformation field, and slip risk, organized as a directed hierarchy in which each downstream stage is conditioned on stop-gradient signals from preceding stages. A directed attention mask allows tactile queries to attend to the video-action context of each candidate while preventing video and action queries from attending to tactile tokens. For planning, HiTac-WAM ranks candidate action chunks using tactile forecasts and task-progress estimates. For execution, the selected tactile forecast is retained as a reference; persistent discrepancies between predicted and observed tactile states trigger corrective replanning. HiTac-WAM achieves a mean contact F1 of 0.921; under matched training budgets, the directed hierarchy reduces 3D displacement L2 error by 17.6% relative to the deformation-only predictor and improves slip AUPRC by 60.4% relative to the slip-only predictor. Across chip grasping, blackboard erasing, and USB insertion, selection guided by the hierarchical forecasts increases the average real-robot success rate from 31.1% to 61.1%, while the full system attains 72.2%.

0.42

PredTac: Learning Contact-Rich Manipulation with Predicted Touch

cs.RO ·2026-09-14 ·Weijia Fan, Daqiang Guo
similarity 0.78
Abstract · 8 pages, 4 figures

Contact-rich manipulation benefits from tactile feedback, yet physical tactile sensors introduce hardware, calibration, synchronization, and maintenance costs that complicate policy learning and deployment. We formulate predicted touch as an alternative to measured tactile input and present PredTac, a framework that learns to infer tactile states from causal visual observations and robot states and uses the predicted touch as an explicit interface for policy learning and execution. A tactile predictor is first trained with tactile supervision and then used to provide contact information without requiring measured tactile input during downstream policy training or execution. We evaluate PredTac across three contact-rich manipulation tasks in simulation and on a real robot, and further examine how policy performance depends on the predicted contact content. In simulation goal-offset evaluations, predicted-touch policies achieve 27.0%, 52.0%, and 44.7% success on USB, Barbed-spike, and Valve, respectively, improving over the visual baseline by 8.0-13.7 percentage points. On the real robot, predicted-touch ACT achieves 70.0%, 50.0%, and 90.0% success on USB insertion, Barbed extraction, and Valve rotation, respectively, with a three-task mean of 70.0%, approaching measured-touch ACT at 72.2% and substantially outperforming visual ACT at 21.1%. Fixed-policy interventions further show that performance is sensitive to the spatial structure of predicted contact, with spatial rearrangement at fixed value distributions reducing Valve success by 10.7 percentage points. These results demonstrate that predicted touch can provide useful contact information for contact-rich manipulation without requiring tactile sensing as a policy input.

0.25

TacMind: Benchmarking and Modeling Tactile Interaction States for Robotic Manipulation

cs.RO ·2026-10-30 ·Jiaxin Shi, Zibin Wu, Yichi Zhang, Jianghua Duan, Siyu Zhu +1 more
benchmarkcode/data similarity 0.78
Abstract · Project Page: https://tacmind-bench.github.io/

Tactile sensing provides robots with direct observations of contact physics, local geometry, and interaction dynamics, making it a vital source of feedback for contact-rich manipulation. However, existing tactile manipulation studies are often developed and evaluated within specific task settings, making it difficult to systematically compare how tactile information contributes under different interaction conditions. In this work, we develop a benchmark in simulation comprising 128 tasks organized around three complementary evaluation regimes: Precise, Recognition, and Dynamic. The benchmark further includes controlled static and dynamic task variants and 12 perturbation settings for evaluating robustness under changes in visual and physical conditions. These settings motivate studying tactile information as a temporally evolving interaction representation rather than only as an instantaneous observation. We therefore propose an action-conditioned latent predictive world model that integrates tactile history and learns a tactile state through prediction of future tactile latents. Building on this representation, we design a model that conditions action generation on the learned tactile state and uses predicted future tactile information to refine candidate actions through predictive tactile reflection. Experiments on the proposed benchmark show consistent gains from incorporating tactile information across the evaluated regimes. Project Page: https://tacmind-bench.github.io/

0.18

WiTac: Wrist-Informed Tactile Representations for Contact-Rich Manipulation

cs.RO ·2026-11-16 ·Haotian He, Yiyang Chen, Congsheng Xu, Wenchao Yue, Mingze Ye +7 more
code/data similarity 0.77
Abstract

Similar tactile contacts can call for different corrections depending on the configuration of the hand, object and target. Rather than supplying touch and wrist vision separately, fusing them before policy injection better grounds tactile features in visual context, yielding more accurate contact representations. We introduce Wrist-Informed Tactile Representations (WiTac), a pretrained encoder that learns such representations before action generation. Pretrained on nearly 300 hours of SharpaDex data, WiTac deeply fuses tactile signals with hand motion and wrist views into a comprehensive contact representation. Conditioning downstream VLA policies (GR00T N1.7 and $π_{0.5}$) on WiTac substantially improves task success over vision-only base policies across four contact-rich manipulation tasks (+28.8% and +15.0% on average), and further outperforms a wrist-free tactile encoder by 18.8% and 7.5%, respectively. Offline analyses further show that incorporating wrist vision yields more accurate contact descriptors, stronger joint task-contact discrimination, greater feature stability under tactile noise, and clearer action-direction readout from similar contacts. Project page: https://wrist-informed-tactile-representations.github.io/.

0.34

TacForcing: Streaming Action Generation with Execution-Time Tactile Feedback

cs.RO cs.LG ·2026-08-26 ·Jianbo Zhou, Boyuan Zhao, Yuzheng Zhang, Yiyang Chen, Wenxin Chen +7 more
similarity 0.77
Abstract · 15 pages, 9 figures, 2 tables. Revised text and expanded real-world experiments

Contact-rich manipulation requires adapting to contact states that can evolve substantially within an action horizon. However, chunk-based vision-language-action models predict complete action chunks from observations collected before execution, leaving tactile conditioning stale during execution. Existing tactile-reactive approaches typically rely on separate high-frequency controllers, which increase both architectural and training complexity. In this paper, we introduce TacForcing, a streaming action-generation framework incorporating execution-time tactile feedback. TacForcing replaces the standard action expert with a streaming expert that generates action blocks sequentially while preserving intermediate states of unfinished blocks. After each block is executed, the expert resumes generation from these states using newly acquired tactile feedback. To better align tactile conditioning with action execution, we further introduce Execution-Aware Tactile Attention (EATA), which restricts direct access to each tactile update to the next block scheduled for execution. Across six UniVTAC simulation tasks and six real-world contact-rich manipulation tasks on two robot platforms, TacForcing achieves average success rates of 65% in simulation and 66% in the real world, outperforming the strongest baselines by 6 and 15 percentage points, respectively.

0.38