CS Paper Radar

HOForce: Motion and Force Reconstruction of Hand-Object Interaction Using a Single-View RGB-D Video

Jiahui Wang, Wanqing Du, Yuanbin Zou, Zhefeng Xu, Feng Xu

cs.CV ·submitted 2026-11-18 05:23 UTC · v1
code/data

Abstract

Reconstructing hand-object interactions is an important task, and achieving it with a single camera makes large-scale capture practical but challenging due to heavy occlusions. We introduce HOForce to track hands and objects, and further recover interaction forces from single-view RGB-D video and known object properties. For two-hand manipulation, we jointly model fingertip forces of both hands and the contact forces between objects when two objects are presented. The reconstructed forces also improve motion tracking by giving pose constraints in the occluded regions. HOForce recovers hand and object motion more accurately on DexYCB and TACO and produces less hand-object penetration than interaction baselines on DexYCB. On our dataset of fingertip forces recorded with tactile sensors, HOForce reduces normal-force MAE by 24.5% relative to the strongest baseline. The recovered forces reproduce object motion in MuJoCo and transfer to other engines after adaptation.

Comment
Includes supplementary material. Project page: https://huggingface.co/spaces/fnoi16wjhui/HOForce

Closest papers

Nearest neighbours by meaning across the whole index.

VICON: Visual-Inertial-Contact based Hand-Object Tracking for Manipulation Datasets

cs.RO ·2026-10-04 ·Youbeen Jeon, Uiseong Shin, Hwanchul La, Jaeseong Kang, Hyelim Choi +1 more
datasetcode/data similarity 0.84
Abstract · 9 pages, 6 figures, 4 tables

Learning dexterous manipulation benefits from human demonstration datasets that capture diverse and natural hand-object interactions. In particular, contact points and forces provide supervision on where and how strongly to interact, which cannot be fully captured by motion trajectories alone. However, methods for jointly capturing hand and object motion, contact points, and forces remain limited. Moreover, severe occlusion from hand-object interaction challenges accurate tracking of both hands and objects. To address these limitations, we present a Visual-Inertial-CONtact based hand-object tracking (VICON) framework. It holistically captures both hand and object motion along with contact information during manipulation, even under severe occlusion. First, we adopt a visual-inertial glove and an RGB-D camera for accurate hand tracking, and redesign the glove to incorporate contact sensing. Specifically, force-sensitive resistors (FSRs) are placed on the glove based on human grasp frequency to synchronously record contact states and calibrated normal forces. Second, without requiring pre-existing CAD models, we estimate object poses using RGB-D images and a mesh reconstructed from a monocular video. We propose factor-graph-based object trajectory estimation that fuses object-pose estimates weighted by visibility under hand-object occlusion, FSR measurements, and a hand-motion prior. Across 40 motion-capture sessions with five objects, VICON achieves a 2.5% failed-frame rate compared with 50.9-64.6% for the baselines, with median errors of 3.9 mm and 3.0 degrees under occlusion. Using VICON, we construct a dataset containing synchronized hand-object motion, contact points, and normal forces, and will publicly release an expanded dataset covering 10 object categories at https://github.com/VICON-dataset/dataset.

0.31

DynamicHOI: Coupled Dynamics for Physics-aware HOI Reconstruction

cs.CV ·2026-09-29 ·Wenliang Guo, Zhanbo Huang, Yu Kong
similarity 0.79
Abstract · Page: https://wenliangguo.github.io/HOI-Reconstruction-Page/

We study hand-object interaction (HOI) reconstruction from monocular RGB videos, where partial observations can produce visually plausible yet mechanically inconsistent trajectories. Existing methods mainly enforce visual and geometric agreement, leaving the underlying interaction dynamics insufficiently constrained. We propose DynamicHOI, a physics-aware HOI reconstruction framework combining geometry-grounded diffusion refinement with coupled hand-object dynamics. Geometry spatially grounds visual evidence for trajectory refinement, while articulated inverse dynamics and Newton-Euler dynamics derive hand generalized forces and object wrenches for dynamics-level supervision. We further couple hand and object dynamics through contact-force transfer and recover active hand actuation as an interaction-level physical quantity. We formulate its empirical magnitude distribution into a probabilistic prior that penalizes unlikely actuation and suppresses mechanically implausible reconstructed motion. Experiments on three HOI datasets show consistent improvements in both hand and object reconstruction. The reconstructed trajectories further benefit downstream applications including hand world-model generation and robotic manipulation learning, demonstrating the value of physics-aware HOI modeling beyond reconstruction.

0.21

TactoHand: Learning Geometry-Based Dense Hand-Surface Interaction Fields from Video

cs.CV ·2026-10-29 ·Ziheng Xi, Weibo Li, Jiayi Yu, Sipeng Zheng, Wanpeng Zhang +4 more
code/data similarity 0.79
Abstract · 23 pages, including references and appendices

Understanding how humans interact with the world requires a representation of physical interactions at the hand surface. Tactile sensing captures these interactions, but collecting tactile data at scale requires specialized hardware. We introduce TactoHand, a model that predicts three dense hand-surface interaction fields---contact, proximity, and 3D force---from monocular video. We derive geometry-based contact and proximity labels and motion-derived force labels from eligible training data within a curated collection spanning approximately 50 million source frames. TactoHand uses a temporal transformer to aggregate visual evidence across frames, while three learned queries decode the corresponding hand-surface fields. A differentiable physics layer further constrains force predictions using observed object motion. Across in-domain and out-of-domain benchmarks, TactoHand improves contact and proximity estimation over prior methods. In addition, physics supervision reduces position and rotation errors in motion rollouts, and the predicted contact and proximity fields improve downstream hand-object reconstruction. Together, these results show a scalable, low-cost path to learning hand-surface interaction fields without collecting tactile measurements. Code will be released at https://github.com/zhenqis123/Tactohand.

0.24

OmniHOI: Dexterous Hand-Object Interaction from Monocular Human Video

cs.RO ·2026-10-07 ·Ting Mao, Yanming Shao, Ziheng Wang, Haoyu Liu, Yiqun Wang +2 more
code/datahighly cited similarity 0.77
Abstract · The project page is available at https://hydrofoooil.github.io/OmniHOI/

Monocular videos of human manipulation provide abundant dexterous demonstrations, yet reconstructing hand-object interaction from a single view and transferring it to robot hands remain difficult, limiting their direct use for robot execution. Prior methods either require task-specific RL training, limiting scalability, or assume clean motion-capture trajectories and thus cannot operate directly on video. We present OmniHOI, a pipeline that turns an RGB video of hand-object interaction into an interaction-faithful trajectory on dexterous hands. The key idea is to enforce physical consistency using the evidence available at each stage: image evidence during reconstruction, contact geometry during retargeting, and dynamics during physics-in-the-loop refinement. Each stage optimizes the corresponding representation directly, correcting errors before they propagate downstream or must be absorbed by a learned policy. Across 150 motion-capture trajectories transferred to each of five dexterous hands with 6 to 22 DoF, we achieve 39-89% success, compared with at most 31% for prior transfer methods. On 60 monocular video clips, we achieve 53% success, compared with 28% for the best prior video-to-robot pipeline. Its trajectories also execute on a real bimanual robot across diverse tasks.

0.47

TouchSight: Bare-Handed Tactile Prediction from Egocentric Video via Generative Visual Augmentation

cs.CV cs.AI ·2026-09-17 ·Danyan Zhou, Jinxuan Lu, Jiawei Lin, Tianxing Chen, Chuqiao Lyu +1 more
hot directionhighly cited similarity 0.75
Abstract

Tactile signals provide direct contact and force measurements that are essential for understanding physical interactions and enabling dexterous robotic manipulation. However, tactile sensing requires direct measurement at contact interfaces, making large-scale data collection reliant on intrusive, costly, and restrictive instrumentation. We present TouchSight, a monocular egocentric vision framework for dense full-hand contact force prediction that leverages 500 hours of pressure-glove recordings and extensive hand-object interaction (HOI) data. To address the appearance gap between gloved training data and bare-hand real-world scenarios, we construct TwinTouch-20H: 20 hours of paired visual data in which generative video models re-render gloved recordings as bare-hand observations against new backgrounds while preserving the original measured tactile labels. TouchSight predicts dense force from both gloved and generated bare-hand videos, outperforms prior contact prediction methods on OakInk2, qualitatively generalizes to natural bare-hand egocentric videos from unseen datasets, and improves consistently as glove supervision scales. These results demonstrate that dense tactile signals can be recovered from egocentric vision alone, without tactile instrumentation at capture time.

0.46

Hand2Robot: Object-Centric 4D Hand Reconstruction from Human Demonstrations for Robotics

cs.RO cs.CV ·2026-10-11 ·Zetao Du, Weiqing Wang, Hanbing Zhang, Yimiao Zhou, Ye Shi +2 more
code/data similarity 0.75
Abstract · 21 pages, including appendix. Project page: https://hand2robot.github.io/

Human demonstrations can capture task-relevant manipulation without using the target robot, but the recorded hand motions cannot directly serve as robot action supervision. Hand reconstruction and motion retargeting provide a direct route to such supervision, yet recovering hand motion alone does not ensure physically consistent hand-object interactions. To address this issue, we introduce Hand2Robot, an object-centric 4D hand reconstruction framework for robot policy post-training. Given videos of humans performing the target task, Hand2Robot extracts interaction clips, reconstructs object geometry, and generates robot action supervision through hand-object interaction optimization and motion retargeting. For object tracking, we combine observation confidence with temporal motion constraints to select a globally consistent object pose trajectory from per-frame pose candidates. For hand refinement, we use object geometry and motion as a reference and combine staged 2D alignment with object-local contact constraints to refine hand trajectories and finger joint configurations. Experiments on DexYCB and HO3D-v3 show improved object pose accuracy and hand-object interaction quality. Experiments on three real-robot dexterous manipulation tasks further show that reconstructed and retargeted human demonstrations can effectively supplement limited robot data for target-task policy post-training.

0.26

CARD: Contact-Anchored Retargeting for Dexterous Manipulation

cs.RO ·2026-10-27 ·Cunxi Dai, Botao He, Francois R Hogan, Wei Pan, Rao Fu +5 more
similarity 0.74
Abstract · Project webpage: https://card-retargeting.github.io/

Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.

0.39

EgoPHI: Estimating 3D Hand-Object Contact and Force from Egocentric Vision

cs.CV cs.GRcs.HCcs.RO ·2026-08-13 ·Andela Ilic, Rachel Schuchert, Yijing Jiang, Christian Holz
top venue similarity 0.74
Abstract · Accepted by ECCV 2026

Understanding hand-object interaction from egocentric vision is essential for modeling how people physically engage with the surrounding world. Yet reasoning about physically grounded interaction requires estimating the forces acting on hands and objects, beyond localizing contact. We present EgoPHI, the first method that jointly estimates dense contact maps and 3D force distributions on hand and object meshes from a single monocular RGB image and object geometry. To address the lack of scalable ground-truth force annotations, we introduce a physics-based simulation pipeline that augments existing hand-object datasets with dense per-vertex force supervision. EgoPHI then learns dense 3D contact and force on interacting hand and articulated object meshes, extending vision-based force estimation beyond image-space or planar settings. Our evaluation on in-distribution and out-of-distribution benchmarks shows that EgoPHI improves force estimation over existing approaches while generalizing to unseen datasets. To evaluate sim-to-real transfer, we constructed two physical objects that capture dense object contact and force magnitude and used them to record a dataset of interactions from eight participants across diverse touch and grasp types. Our results demonstrate that EgoPHI recovers meaningful 3D contact and force distributions in simulated, out-of-distribution, and real-world settings, advancing egocentric hand-object understanding from contact localization toward physically grounded interaction reasoning.

0.71