CS Paper Radar

Effects of Locomotion and Viewpoint Control on Immersive Robot Telepresence for Navigation and Inspection

Ammaar Zaman, Neven ElSayed, Oliver Prentner, Mohamed Ellethy, Mostafa M. Lotfy, Maram Selsabila Mahmoudi, Eduardo Veas

cs.RO cs.HC ·submitted 2026-11-18 06:27 UTC · v1

Abstract

In many robot telepresence interfaces, movement and viewing are managed through handheld inputs. This can divide attention between steering, looking, and inspection. We compared joystick versus omnidirectional treadmill locomotion and joystick-based versus head-guided camera control in a within-subject 2x2 study in which 17 participants used a virtual reality headset to guide a quadruped robot through a physical maze while locating marked wall symbols and capturing them as visual evidence. Mixed-effects analyses showed that head-guided camera control was associated with faster completion, lower wall-contact cost, lower workload, and more favorable presence, usability, technology acceptance, and flow than joystick-based camera control. The strongest overall objective performance was observed in the joystick locomotion plus head-guided camera condition, whereas the omnidirectional treadmill plus head-guided camera condition emerged as the strongest experiential compromise. Exploratory camera analyses showed that head-guided camera control reduced switching, increased reliance on the pan-tilt view, and supported a more stable viewing strategy across the maze. These strategy differences were consistent with the performance advantage, especially for wall-contact duration. Targets captured remained near ceiling and simulator sickness remained low across all conditions. Overall, the results indicate that viewpoint control was the stronger differentiator in this combined navigation and inspection task, while locomotion still shaped the objective and experiential tradeoff.

Closest papers

Nearest neighbours by meaning across the whole index.

Steering Versus Teleporting in Mobile Virtual Reality

cs.HC ·2026-09-24 ·Kristen Grinyer, Daniel Zielasko, Robert J. Teather
published similarity 0.64
Abstract · to appear in VRST 2026

Mobile virtual reality (MVR) provides low-cost access to extended reality (XR), but its limited input restricts use of common locomotion techniques such as head-decoupled and velocity-controlled steering. Using a low-cost controller with an audio-based button, we compared gaze- and controller-directed steering and teleportation in MVR. We included a controller pitch-based speed-control technique enabling continuous head-decoupled steering. Performance and participant feedback indicate that gaze was better suited to teleportation, whereas controller pointing better supports steering in primed search. We compare with similar techniques in standard VR and derive design considerations for low-cost, narrow-FOV hardware, demonstrating the potential to support varied travel techniques and velocity control in low-fidelity XR.

0.35

Looking Around by Looking Around: Omnidirectional Gaze-based VR Viewport Control

cs.HC ·2026-08-30 ·Hock Siang Lee, Jinghui Hu, Florian Weidner, Haopeng Wang, Hans Gellersen
published similarity 0.63
Abstract

Traditional VR viewport control primarily relies on head and torso movement, which can be effortful and limiting in both constrained and extended-use settings. We introduce Looking Around by Looking Around (LALA), a gaze-based VR pitch-and-yaw viewport control technique designed for natural and effortless omnidirectional exploration via eye movements, without requiring or obstructing movement of the head, hand, or body, offering a low-effort and highly accessible interaction method. Because gaze is primarily used for perception and exhibits oculomotor and perceptual asymmetries, using it directly for control is difficult. To address this, we designed an asymmetric omnidirectional control profile for the eye, then built on it to exploit tendencies for eyes to stay within comfortable regions for viewport control. We evaluated LALA in a user study (N=18) featuring two contrasting tasks: alignment towards known directions and open-ended visual search towards unknown directions. LALA was strongly preferred over the traditional baseline, achieving competitive performance while enabling fully hands-free interaction with minimal physical movement.

0.36

Passthrough Rigidity: The Behavioral and Visuomotor Costs of Mediated Perception

cs.HC ·2026-09-21 ·Markus D. Solbach, Mohit Goyal, Sakar Khattar, Jayant Varma, Bjorn Vlaskamp +2 more
publishedcode/data similarity 0.63
Abstract · 10 pages, 16 Figures, ISMAR

Broad public adoption of head-mounted displays using video passthrough remains elusive despite significant market investment. A precise understanding of why users experience persistent discomfort even as hardware factors such as resolution and latency have dramatically improved remains an open issue. This paper investigates the impact of viewing the world through video passthrough systems on human behavioral and physiological patterns through a large-scale multimodal study. We developed a novel protocol to capture synchronized oculomotor, kinematic, and physiological data during a block assembly task requiring complex hand-eye coordination. Using a within-subject design (N=110), we evaluated both natural and passthrough viewing conditions. Our results reveal a four-fold suppression of rotational head velocity and a pronounced decoupling of head-gaze coordination. This suggests motor caution being employed as an adaptive strategy - which we term "Passthrough Rigidity". This phenomenon appears to shift the information-gathering burden to the oculomotor system, resulting in significantly longer fixation durations and restricted visual search patterns. These kinematic shifts directly correlate with poorer task performance and measurable physiological cost, evidenced by a significant reduction in blink duration and increased reports of ocular strain and cognitive load. We conclude that current passthrough implementations induce a measurable shift from flexible exploration to motor caution, where task performance is preserved at the cost of user comfort and biomechanical efficiency. These findings provide a novel quantitative framework for evaluating and improving future XR devices, establishing that resolving "comfort" for passthrough requires addressing the deep-seated biomechanical compensations caused by mediated perception. Data available at https://data.nvision.eecs.yorku.ca/Passthrough

0.29

Gaze-Assisted Supervisory Control for Lunar Robotic Arm Teleoperation Under Concurrent Monitoring

cs.RO ·2026-10-29 ·Jiayu He, Yifan Li, Oliver R. Runswick, Ernest N. Kamavuako, Yunjie Jia +2 more
similarity 0.62
Abstract

Rover-mounted robotic arms can extend human reach during lunar sample handling, but continuous joystick teleoperation requires repeated visual-motor alignment while operators may also need to monitor system states. This paper presents a gaze-assisted supervisory control framework in which gaze nominates a rock or placement target, explicit confirmation authorizes the action, and the robot performs bounded autonomous grasp-and-place execution. The framework was evaluated against manual joystick teleoperation in a mission-analog virtual reality study with 16 participants. The study used a 2 x 2 x 3 within-subject design varying control mode, placement difficulty, and concurrent monitoring load. Mean recorded task completion time decreased from 47.65 to 18.43 s per rock, with 72.5% of this difference arising during grasping. Under the tested auditory monitoring conditions, gaze-assisted supervisory control showed less average proportional slowing, with no detected control-mode difference in monitoring-response accuracy or speed. The rate of gaze shifts between core areas of interest decreased from 49.98 to 27.73 shifts/min, while the raw NASA Task Load Index score decreased from 32.54 to 18.26. However, the benefit was task dependent. In precision placement, manual control yielded lower mean placement error and a higher placement success rate. These findings support a mixed-initiative allocation in which gaze enables rapid task-level intention specification and autonomous execution, while precision-critical stages retain manual refinement.

0.14

Digital Twin-Driven VR Teleoperation with Multi-View Spatial Perception for Surgical Robots

cs.RO ·2026-09-22 ·Chang Liu, Chenhao Yu, Honghao Zhao, Hao Ding, Haochen Wei +3 more
published similarity 0.60
Abstract · 8 pages, 8 figures. Accepted to IROS 2026

Current robot-assisted minimally-invasive surgery (RMIS) platforms provide a fixed console for the surgeon to view stereo endoscopic images and teleoperate instruments inside the patient. Several researchers have proposed the use of a head-mounted display (HMD) as a portable console, with video pass-through rendering of the endoscope images which, like the fixed console, restricts the operator to a single endoscopic viewpoint and limits depth perception. We present a digital twin-driven virtual reality (VR) teleoperation platform, where the digital twin is created from markerless perception of the surgical environment and streamed for display on the HMD. This overcomes the limitations of video pass-through by providing multi-view rendering and natural motion-parallax cues, enabling decoupling of the user's hand posture from strict instrument alignment. The system utilizes VR hand controllers to increase the teleoperation workspace and to improve the robustness and stability of instrument control compared to the hand tracking approach adopted by most prior systems. A 15-participant user study on the da Vinci Research Kit (dVRK) shows that our VR platform significantly outperforms a state-of-the-art HoloLens 2 mixed reality baseline, reducing path length by 86% and jerk by 95%, while achieving depth perception confidence comparable to or exceeding the traditional console across all conditions.

0.41

Exploring Mixed Reality for Engagement in Robotics: A Comparison of Robot Control Methods

cs.HC ·2026-10-12 ·Samantha Edvell, Dinh Tung Le, Gavin Paul
similarity 0.59
Abstract · 10 pages. Submitted to ACRA 2026

This paper presents a Mixed Reality (MR) robotics experience that provides an accessible introduction to interacting with a physical robot. The application combines a TurtleBot with a virtual animal-tending activity and three control methods: Joystick, Waypoint, and Path-Drawing. A mixed-methods user study with 10 participants investigated changes in robotics interest and confidence following the experience and how the control methods influenced engagement, workload, and preference. Confidence increased following the experience, with the exploratory analysis indicating a significant pre--post difference, while the increase in interest was not statistically significant. The control methods produced clear differences in perceived workload and ease of use, with Path-Drawing generally more demanding and difficult to use. Joystick was preferred by eight of ten participants and was associated with better perceived performance and lower frustration. However, no statistically significant differences were detected in the other engagement dimensions, suggesting that the most preferred method was not necessarily more engaging across all aspects of the experience. These findings highlight the importance of considering both usability and engagement when designing how users interact with robots in introductory MR experiences.

0.23

Assessing the Marginal Utility of Exocentric Head Views in UMI-Style Large-FoV Wrist-Camera Manipulation

cs.RO ·2026-10-08 ·Yuhui Duan, Shi Jin, Yuntian Wang, Jin Wang, Siao Liu +3 more
similarity 0.59
Abstract

Multi-view perception is often treated as a safe design choice for robot manipulation: if one camera is useful, more cameras should be better. We revisit that assumption in tabletop bimanual manipulation by comparing policies trained with two large-field-of-view (FoV) wrist cameras against policies that additionally receive a head view, using controlled-variable experiments on a real bimanual platform. Across three tabletop tasks, adding a head view does not consistently improve task completion or execution quality: when the wrist cameras already observe the objects, grippers, and goal regions, wrist-only policies form a strong baseline. Restricting the wrist-camera FoV increases the potential value of a head view, but performance improves most reliably when the added view supplies concentrated, task-relevant information: region-of-interest (ROI) cropping yields more consistent head-view gains than the uncropped image, which is dominated by background and task-irrelevant regions. The data-scaling results further suggest an interaction between FoV and demonstration count: wide observations improve coverage but may require more data to stabilize, and they may reach a higher performance ceiling once enough demonstrations are available. These results suggest that camera design should be framed as a task-relevance and information-density problem rather than as a simple count of input views.

0.12

SPOT: Spatial Perception-Oriented Long-Horizon Humanoid Teleoperation

cs.RO ·2026-09-07 ·Lixing Fang, Ziyan Xiong, Sunli Chen, Zhiyang Dou, Chuang Gan
similarity 0.59
Abstract

High-quality demonstration data is becoming a central bottleneck for training general-purpose humanoid robots. While recent humanoid teleoperation systems have made substantial progress in retargeting human motion to robot motion, long-horizon loco-manipulation requires another capability: operators must maintain task-relevant spatial awareness over time, e.g., object locations, surrounding environments, the robot's pose. We call the extent of this awareness the operator's perceptual horizon. However, existing methods often shorten this: narrow views miss peripheral events, robot-mounted cameras become unstable during locomotion, and coupled head-view control makes looking around interfere with robot motion. We present SPOT, a Spatial Perception-Oriented VR Teleoperation system for collecting long-horizon humanoid demonstration data by providing extended perceptual horizon. SPOT combines a robot-mounted binocular fisheye camera, a wide-field stereoscopic display, viewpoint-decoupled free-looking, and visual stabilization to provide a robot-centric view that is wide, stable, and actively inspectable. Unlike conventional egocentric interfaces, SPOT decouples visual exploration from robot actuation: the egocentric stereo observation is rendered on a virtual hemisphere around the operator, so natural head rotations change where the operator looks within the wide-field view rather than commanding the robot head, camera, or torso. We evaluate SPOT on perception-critical humanoid data-collection tasks spanning drop recovery, peripheral retrieval, large-workspace bimanual manipulation, fine alignment, and dynamic interaction. SPOT improves efficiency, accuracy, and recovery speed, demonstrating its effectiveness for user-friendly and scalable long-horizon humanoid data collection.

0.45