CS Paper Radar

Approximation Algorithms for Product Query Optimization

Macéo Ottavy, Avijeet Ghosh, Pascal Koiran, Alantha Newman, François Schwarzentruber, Blair D. Sullivan, Stéphan Thomassé

cs.DS ·submitted 2026-11-18 11:18 UTC · v1
theory

Abstract

We study database query optimization for Cartesian products. This problem is equivalent to finding an optimal plan for multiplying non-negative integers. We call this problem multiplication ordering. We show that the problem has an FPTAS when the cost of a plan is the sum of all intermediate products; both in the case when the overall final product is counted and when it is not. We show that using the optimal solution to the well-known product partition problem does not always lead to an optimal plan, but we establish connections between the product partition and multiplication ordering problems. Finally, we prove that multiplication ordering is in PTIME (resp. \NP-complete) when integers are powers of a same base where the exponents are written in unary (resp. in binary).

Closest papers

Nearest neighbours by meaning across the whole index.

A simplified proof of polynomial improvements for 3SUM and APSP

cs.CC ·2026-10-11 ·Sankeerth Rao Karingula, Shachar Lovett
publishedhot directionhighly cited similarity 0.59
Abstract

We give a simplified proof of the polynomial improvements for integer 3SUM and all-pairs shortest paths (APSP) established by Alman and Vassilevska Williams, with weaker exponents. The central ingredient is selected-entry matrix multiplication: computing a prescribed set of entries of a product of dense rectangular matrices. Starting from Schönhage's inner/outer-product identity, we construct a multiplication rule that shares intermediate products among many outputs. We apply this rule recursively and bound the work by counting the requested entries at each level. Applied to incidence matrices, the algorithm solves Offline Set Disjointness over a small universe. Known deterministic reductions then yield truly subquadratic integer 3SUM and truly subcubic APSP for polynomially bounded integer inputs.

0.58

Convolution Sum-Product Queries

cs.DB ·2026-09-03 ·Kyle Deeds, Timo Camillo Merkl, Dan Suciu
similarity 0.58
Abstract

We study query evaluation for an extension of sum-product queries (SPQ) that allows atoms with linear combinations of variables (e.g. $A(2X+3Y-Z, Y+Z)$), which we call convolution sum-product queries (CSPQs). These queries arise in both practical settings (e.g. image processing workloads) and theoretical ones (e.g. the $(\min,+)$-convolution and $k$-SUM conjectures), and capture SPQs with added linear equality constraints. While prior work has considered the impact of linear in- and dis-equality constraints on query evaluation, the techniques developed in that setting are asymptotically sub-optimal for CSPQs. To address this, we describe several evaluation algorithms for CSPQs that leverage linear algebra techniques like rank analysis, quotient spaces, and variable substitution. First, we adapt Worst-Case Optimal Joins to CSPQs, achieving a runtime similar in spirit to that for conjunctive queries. Then, we extend the definition of tree decompositions (TDs) to CSPQs, and describe a factorized execution. In this extension, linear combinations are first-class citizens and play the same role as variables in traditional TDs. We define three width measures that bound the complexity of this execution with respect to the size of the domain values, of the active domain, and of the relation's support. Lastly, we show how these methods can be applied to arbitrary fields beyond the rationals.

0.24

Stronger Hardness for Submodular Maximization Subject to a Matroid Constraint

cs.DS ·2026-10-05 ·Moran Feldman, Alan Kuhnle
similarity 0.57
Abstract · 13 pages. This version adds a remark about the relationship between this work and the results of arXiv:2610.00545

Maximizing a submodular function subject to a matroid constraint is a cornerstone problem in combinatorial optimization. The state-of-the-art algorithm for this problem obtains $0.401$-approximation~\cite{buchbinder2024constrained}, and the state-of-the-art hardness result shows that no polynomial time algorithm can obtain better than $0.478$-approximation for this problem~\cite{oveisgharan2011submodular}. In this work, we present the first improvement in $15$ years for the hardness result, showing that no polynomial time algorithm in the value-oracle model can obtain better than $8/17 \approx 0.471$-approximation, even for the special case of a cardinality or (simplified) partition matroid constraint.

0.40

Approximating Independent Sets Using Additive Combinatorics

cs.DS cs.CCmath.CO ·2026-10-18 ·Shachar Lovett
published similarity 0.56
Abstract

We give a deterministic quasi-polynomial time algorithm for approximating the largest independent set in a graph. We show that if an $N$-vertex graph contains an independent set of size $2^{-t} N$, then we can find an independent set of size $2^t$ in quasi-polynomial time, for all $t$ up to a constant factor of $(\log N)^{1/3}$. This gives an approximation factor of $N / \exp((\log N)^{1/3})$, which has the same shape as known hardness results for quasi-polynomial time algorithms, up to a different exponent of the logarithm. The algorithm builds on a structural principle: a graph containing a large independent set must also contain a large sparse structured set, and such a set can be found efficiently. A greedy algorithm then extracts an independent set from it. Our proof draws on tools in additive combinatorics, in particular spreadness and sifting, to obtain the combinatorial structural results. We then convert these to efficient algorithms using pseudo-marginals obtained by semidefinite programming.

0.60

Associativity of Multiplication Is Hard for Resolution

cs.CC cs.LO ·2026-10-06 ·Vincent Liew
theorycode/data similarity 0.56
Abstract · 33 pages, 10 figures. Lean 4 formalization of the main theorems at https://github.com/dysfunctor/associativity

SAT solvers are empirically known to perform poorly when reasoning about multiplication. Yet for over a decade we have lacked a theoretical explanation for this phenomenon. CDCL SAT solvers implicitly search for resolution proofs, and no lower bound on proof size has ruled out the existence of short proofs that solvers simply fail to find. We give the first lower bound of this kind by showing that general resolution proofs of the associativity of $n$-bit multiplication require size $2^{Ω((n/\log n)^{1/4})}$. This lower bound holds for a broad class of multiplier encodings based on partial product summation, including the standard array and Wallace-tree multipliers used to bit-blast multiplication in SMT solvers. This result resolves an open problem of Beame and Liew. The proof constructs a reduction from a perfect-matching principle on bounded-degree bipartite expander graphs to multiplier associativity. Itsykson, Slabodkin, and Sokolov proved that this principle is hard for resolution. The lower bound for multiplier associativity follows. The same reduction, when combined with Håstad's recent lower bound for the perfect-matching principle of the odd grid, yields an exponential lower bound for multiplier associativity in the stronger bounded-depth Frege proof systems.

0.38

Near-Linear Preprocessing for Range Weighted Longest Increasing Subsequence Queries

cs.DS ·2026-10-14 ·Keisuke Korogi
similarity 0.55
Abstract · 8 pages, 1 figure

We give a deterministic data structure for range weighted longest increasing subsequence (LIS) queries on $n$ values with positive weights. Preprocessing takes $O(n\log^2 n)$ time and space. Value queries take $O(\log n)$ time, and an optimal subsequence of $k$ elements can be reported in $O(k + \log n)$ time. This resolves an open question on truly subquadratic preprocessing with polylogarithmic query time. The key is a single-crossing property of envelopes for value-separated endpoint sets, enabling $O(\log n)$-time persistent merges. The bounds assume constant-time exact addition and comparison of weights.

0.32

Simple, Faster (min, +) Matrix Multiplication and APSP

cs.DS ·2026-10-14 ·Barna Saha, Christopher Ye
theory similarity 0.55
Abstract · 17 pages

In this note, we provide a deterministic algorithm that computes the $(\min, +)$-Matrix Product $C = A * B$ of two $N \times N$ matrices $A$ and $B$ with polynomially bounded integer entries in $\tilde{O}(N^{2.9964})$ time, improving upon the exponent of $O(N^{2.9995})$ time obtained in the recent breakthrough by Anthropic (Alman and Vassilevska Williams, 2026). Our algorithm uses a phased approach first proposed by Bringmann, Grandoni, Saha, and Vassilevska Williams in 2016. The phased approach produces an approximation $\tilde{C}$ of $C$ in truly subcubic time such that the number of remaining triples $(i,k,j): A_{i,k}+B_{k,j} < \tilde{C}(i,j)$ is truly subcubic. This provided strong evidence that a truly subcubic $(\min, +)$-Matrix Product and therefore, a truly subcubic algorithm for All Pairs Shortest Paths (APSP) may exist. However, to find the remaining triples in subcubic time, a sparse certificate is needed whose construction was not known. We use the thin matrix product theorem of the recent breakthrough to provide such a certificate. This gives a simple modular subcubic algorithm for APSP.

0.46

Optimal Polynomial-Query Approximation for Consistent Submodular Maximization with Short Lookahead

cs.DS cs.LGmath.OC ·2026-11-08 ·Vaneet Aggarwal
similarity 0.55
Abstract

Elements arrive one at a time, and after each arrival an algorithm holds a set of at most $k$ arrived elements. Its goal is a held set whose value under a monotone submodular function is close to the best value that $k$ arrived elements can achieve. The recourse of an update is the number of elements inserted into or removed from the held set, and we require it to be bounded independently of $k$ and of the number $n$ of arrivals. With evaluations only on sets of arrived elements and polynomially many of them, the best ratio a randomized algorithm can achieve is $2-\sqrt{2}\approx0.5858$. We show that seeing future arrivals raises the best ratio for polynomially many evaluations to $1-1/e\approx0.6321$, for deterministic and for randomized algorithms; no algorithm with polynomially many evaluations exceeds $1-1/e$, even when all elements are available at once. For every $\varepsilon>0$, a deterministic algorithm that sees the next $\lceil\varepsilon k/3\rceil$ arrivals keeps a set of value at least $1-1/e-\varepsilon$ times the optimum at every time, changes $O(\varepsilon^{-3})$ elements per arrival and makes $(n+1)^{O(\varepsilon^{-2})}$ evaluations. With the whole arrival sequence known in advance, a deterministic algorithm attains the same ratio with $O(\varepsilon^{-2})$ changes per arrival. A randomized algorithm with the same short lookahead makes $O(n^2k)$ evaluations, changes $O(\varepsilon^{-2})$ elements per arrival, and attains the same ratio in expectation at each fixed time. The main tool is a greedy algorithm with an explicit guarantee for each of its partial solutions combined with each initial segment of the known future arrivals. A second tool moves between two such solutions one element at a time while keeping the value high, and the deterministic algorithm times each move using upper bounds on the optimum from failed searches.

0.16