CS Paper Radar

SearchDiffusion: Information-Guided Diffusion Planning for Object Search

Sausar Karaf, Dmitrii Plotnikov, Alexey Kotcov, Dzmitry Tsetserukou

cs.RO ·submitted 2026-11-18 13:05 UTC · v1

Abstract

Object search in unknown environments requires robots to gather useful observations while avoiding obstacles and accounting for limited sensor visibility. We present SearchDiffusion, a diffusion-based planner that generates position and heading trajectories using a learned dense utility map. The map represents geometric accessibility, useful visibility, and semantic progress. It conditions trajectory generation and provides an objective for sampling guidance. Sampled map hypotheses provide additional geometric context, while geometric and heading guidance, validity checks, and analytical selection support execution. Across 90 simulated tasks on 24 map layouts, SearchDiffusion achieved 95.6\% target detection at greater computational cost. Ablations show complementary benefits from utility and guidance, with limited additional detection benefit from runtime map hypotheses. In ten physical quadruped trials using OneMap relevance maps, eight were successful under operator assessment, without fine-tuning on real-robot data. These results support combining learned spatial utility with guided trajectory generation for object search under partial observability.

Closest papers

Nearest neighbours by meaning across the whole index.

Spatially Conditioned Trajectory Diffusion

cs.RO ·2026-11-19 ·Yefim Nudelman, Dor Atzmon, Tom Tirer
code/data similarity 0.72
Abstract · Project page: https://spatial-trajectory-diffusion.github.io/

Multi-Robot Motion Planning (MRMP) requires trajectories that avoid environmental obstacles and collisions between robots in a shared workspace. Diffusion-based planners often address obstacle avoidance through sampling-time guidance, while some conditioned approaches aggregate map geometry into a global representation. We present Spatially Conditioned Trajectory Diffusion (SCTD), a map-conditioned trajectory generator for multi-robot planning. SCTD retains multiple position-aware occupancy tokens accessed through cross-attention throughout a temporal U-Net, with hard endpoint inpainting enforcing start and goal states. One model trained on single-robot demonstrations across procedural environments generates obstacle-aware trajectories without sampling-time obstacle-cost guidance. High-level Conflict-Based Search (CBS) coordinates these trajectories through constrained replanning, retaining inter-agent guidance during sampling and reusing the model across workspace layouts and team sizes. Experiments assess single-robot success and trajectory quality, generalization to unfamiliar layouts with added obstacles, and coordinated multi-robot planning. On 15,000 held-out tasks, SCTD achieves higher success than the evaluated guided diffusion baseline, with the largest gains on hard-detour tasks, while trajectory-quality comparisons show smoother trajectories. Conditioning ablations show higher success with spatial tokens than with a global map embedding, and map-replacement tests demonstrate dependence on the supplied geometry. The resulting multi-robot system achieves higher team success than the compared diffusion baselines, with experiments covering teams of up to 15 robots.

0.32

CMP-IRRT*: A Perception-Assisted Height-Adaptive Planner for Quadruped Robots

cs.RO ·2026-10-07 ·Mingfan Zhao, Wendong Mao, Zhongfeng Wang
publishedcode/data similarity 0.69
Abstract · Accepted at the 18th Asian Conference on Machine Learning (ACML 2026)

Quadruped robots can traverse low obstacles, but many 2D planning pipelines still model obstacles as binary occupied regions and rely on sampling-based search that can be inefficient under a limited budget. We propose a perception-assisted height-adaptive planning framework based on CMP-IRRT*, a Channel Mamba PointNet-guided Informed RRT* planner. Given a calibrated top-view RGB observation, the perception module estimates obstacle regions and converts depth predictions into a ground-relative height map. The planner then performs height-conditioned collision checking, treating high obstacles as blocked while allowing low obstacles to be traversed, and uses the CMP guide to bias sampling toward promising regions while retaining standard free-space and informed sampling fallbacks. Experiments on 2D planning benchmarks show that CMP-IRRT* reduces explored nodes and iterations compared with classical and neural-guided baselines, and a controlled ablation supports the contribution of the Mamba-based guide. In constructed traversability-aware scenarios, the proposed planner reduces path length by up to 16.3% when low obstacles are traversable, and a Unitree Go2 demonstration further shows executable bypassing and traversal behaviors. Our code is publicly available at https://github.com/MingfanZhao/height-adaptive-planner.

0.40

SGE: Semantically-Guided Exploration for Unstructured Environments via Image-Space Waypoint Sampling

cs.RO cs.AI ·2026-08-29 ·Christopher Tatsch, Yu Gu
similarity 0.68
Abstract

This work introduces Semantically-Guided Exploration (SGE), a modular exploration framework for ground vehicles that integrates pixel-level semantic segmentation into sampling-based waypoint selection and receding-horizon route optimization. Unlike conventional geometric exploration methods, SGE evaluates candidate exploration goals directly in the image space using a semantic-aware utility function that accounts for terrain traversability, obstacle proximity, objects of interest, and depth-based exploration reward. Sampled waypoints are projected into 3D and ordered through a real-time Traveling Salesman Problem (TSP) formulation, enabling receding-horizon goal selection. To address real-world navigation uncertainty, the framework introduces mechanisms, including temporary taboo regions to handle navigation failures and a graph-based relocation strategy for efficient backtracking across explored areas. We evaluate SGE in standardized simulation benchmarks against state-of-the-art exploration planners and demonstrate competitive performance in volumetric coverage, while enabling semantic task biasing that cannot be achieved by purely geometric methods. The framework is further validated through real-world experiments using multiple robotic platforms in indoor campus buildings and in limestone and coal mines. Results show consistent performance and adaptability across platforms and domains.

0.41

EgoNav: Bridging Learned Waypoints and Geometry-Aware Local Control for Robust Indoor Navigation

cs.RO ·2026-08-26 ·Jing Wang, Shiqi Zhao, Hairong Qu, Peng Yin
top venue similarity 0.68
Abstract

Image-goal navigation using lightweight topological maps is a practical paradigm for indoor robot deployment: the map requires only geotagged images, and localization relies on visual matching rather than precise pose estimation. However, learned waypoint predictors can produce targets that violate geometric constraints or deviate from the global path. Executing these waypoints safely further requires a local planner capable of collision avoidance, yet existing systems either lack one or rely on fixed parameters that cannot adapt to confined spaces. To address these limitations while retaining the navigational intuition of the learned predictor, we present EgoNav, a hierarchical system that implements this idea by generating candidates from semantically segmented traversable regions and scoring them alongside the learned waypoint for geometric safety, directional coherence, and fidelity to the learned prior. An adaptive local path planner then executes the refined waypoint with parameters modulated based on the refinement outcome. Experiments in Habitat-sim and on a physical humanoid robot show that EgoNav consistently outperforms contemporary baselines in both success rate and path efficiency.

0.41

OccPlanner: Goal-Aware Occupancy-Conditioned Diffusion Planner for PixelGoal Navigation

cs.RO ·2026-08-14 ·Binling Huang, Nianjin Ye, Xi Yang, Liang Hu, Zhou Huang +4 more
code/data similarity 0.68
Abstract · Technical report. 9 pages, 10 figures, and 3 tables

PixelGoal navigation specifies targets directly in the agent's camera view, providing a natural interface between high-level visual reasoning and low-level navigation. Depth can lift a visible target pixel into a metric PointGoal, but this estimate becomes unreliable under occlusion or sensor noise. Moreover, a PointGoal alone does not encode traversability or feasible paths around obstacles. We present OccPlanner, a goal-aware occupancy-conditioned diffusion planner that learns complementary egocentric goal and planning-oriented 3D representations through metric target and occupancy prediction, respectively. These representations condition a diffusion trajectory module to generate target-directed, obstacle-aware trajectories. For scalable geometric supervision, we introduce L3ROcc, which converts monocular RGB navigation videos into aligned 3D occupancy and trajectory annotations. We train OccPlanner on L3ROcc-processed InternData-N1 and evaluate it in closed-loop simulation across four unseen InternScenes categories and two goal-distance ranges. Across all eight settings, OccPlanner substantially outperforms existing open-source PixelGoal approaches and achieves competitive performance against PointGoal planners with direct metric-goal inputs.

0.26

ObstaDiff: Generalizable Diffusion Policy Learning via Obstacle-aware Representations

cs.RO cs.LG ·2026-09-10 ·Jiawen Wang, Kevin Yao, Khalid Jawed
published similarity 0.67
Abstract · Accepted to the 10th Conference on Robot Learning (CoRL 2026), Austin, TX, USA. 16 pages, 5 figures

Imitation learning has achieved impressive results in robotic manipulation, yet most existing approaches assume clean backgrounds and lack explicit mechanisms for obstacle-aware motion generation. Extending such policies to cluttered, real-world scenes with unstructured obstacles remains a key generalization challenge. We present ObstaDiff, a decomposed diffusion-policy framework with a lightweight obstacle-aware visual encoder. ObstaDiff extracts a structured target-obstacle-background representation, enabling the downstream alignment policy to generate end-effector trajectories toward a target-centered bottleneck pose while reasoning about surrounding obstacles. We evaluate ObstaDiff on 61 real-robot greenhouse trials per method (366 executions in total). ObstaDiff achieves 75.41% average task success and 8.20% average obstacle collision rate, outperforming representative imitation-learning baselines and improving generalization in cluttered agricultural scenes.

0.52

2DGS-Planner: Rasterization-based Path Planning in 2D Gaussian Splatting Map

cs.RO ·2026-10-08 ·Jiwon Park, Dong-Uk Seo, Hyun Myung
code/data similarity 0.67
Abstract

Gaussian splatting provides an explicit and efficiently rasterizable scene representation for robot navigation. However, individual Gaussian primitives may not reliably represent obstacles as they are jointly optimized through alpha-composited rendering from a finite set of reconstruction views. We propose 2DGS-Planner, a path planner for ground robots that reads planning-relevant geometry from a 2D Gaussian splatting (2DGS) map through rasterization, rather than treating individual Gaussian primitives as obstacles. During offline roadmap construction, multi-view attribution converts rendered normal dispersion into structural scores for non-ground disks supported by the reconstruction views. These scores guide adaptive node sampling on the ground. Path-aligned orthographic queries validate candidate edges, while cylindrical queries estimate local clearance fields that are cached on the edges. During online planning, graph search initializes a route, and path refinement reuses the cached fields while accounting for the robot's dimensions and ground constraints. Experiments demonstrate improved roadmap connectivity, more accurate clearance estimation, and higher planning success compared with the tested baselines. These results support rasterization as an effective geometric query interface for planning directly on Gaussian maps. Code and data are available at https://2dgs-planner.github.io/

0.28

Rethinking Learned Occupancy in Autonomous Active Mapping with Observation-Gated Filtering

cs.RO cs.CV ·2026-09-08 ·Jiahui Zhang, Bonian Han, Gongbo Liang, Yu Zhang
publishedbenchmark similarity 0.67
Abstract · Accepted to IROS 2026 Space Robotics Workshop (oral)

Autonomous 3D active mapping requires a space robot to choose where to sense while building the geometry needed for navigation. Learned occupancy completion extends spatial context beyond the current field of view, but one predicted map often serves two planning roles: it scores expected surface gain and constrains collision-free motion. Unsupported occupancy can therefore distort both where the robot looks and where it believes it can travel. We study this coupled interface in a controlled closed-loop benchmark by holding the active-mapping system fixed and varying only its planner-facing occupancy across observation-only, learned, oracle-corrected, and ground-truth conditions. Improving occupancy accuracy does not monotonically improve closed-loop coverage: across 25 starts, planning with ground-truth occupancy reaches 70% of the learned baseline's final coverage 12.7 steps earlier on average, while increasing final coverage by only 0.031. Guided by this diagnosis, we introduce an observation-gated filter that retains completion in insufficiently observed regions and suppresses predictions only after repeated frustum exposure without nearby RGB-D support. The filter improves both targeted failure-prone starts without retraining or ground truth. These results motivate online revision of planner-facing geometry during autonomous intervals between communication windows. The current study assumes benchmark RGB-D observations and sufficiently accurate pose estimates; planetary sensing conditions and accumulated localization drift remain to be evaluated.

0.26