CS Paper Radar

Fuse Before Reconstruct: A Novel Reconstruction Paradigm for Multimodal Industrial Anomaly Detection

Zhi Li, Hanyu Wang, Qiyu Chen, Fei Shen, Zhengtao Zhang

cs.CV ·submitted 2026-11-18 14:49 UTC · v1
publishedcode/data

Abstract

Industrial anomaly detection plays a pivotal role in precision manufacturing, where joint analysis of multimodal data emerges as a critical approach to enhance detection accuracy. Feature reconstruction, a dominant paradigm for such joint analysis, is primarily implemented through intra-modal and cross-modal methods, both of which are plagued by significant limitations. Intra-modal reconstruction neglects complementary cross-modal information, while its cross-modal counterpart is prone to projection errors and ambiguous one-to-many mappings (e.g., same textures mapping to multiple geometries), leading to detection failures. To address these limitations, we propose a novel feature reconstruction paradigm, Fuse Before Reconstruct (FBR), which first fuses multimodal features and then performs reconstruction for anomaly detection. Firstly, we propose a bidirectional cross-modal attention mechanism to achieve deep feature complementarity between image and point cloud features, mitigating projection bias through channel alignment and dynamic spatial prior integration. Besides, a learnable pixel-wise gated fusion strategy is adopted to preserve multi-modal structural consistency while optimizing local feature combination. Finally, dual-path collaborative reconstruction is implemented to recover original modal features from the fused representations, where cross-modal consistency constraints effectively eliminate mapping ambiguities. Extensive experiments show that FBR achieves 98.3% I-AUROC on MVTec 3D-AD and 92.6% I-AUROC on Eyecandies, surpassing previous state-of-the-art methods by +2.9% and +4.1%, respectively.

Comment
Preprint before peer review. Includes supplementary material. Code: https://github.com/LiZhi-CASIA/FBR
Journal ref
Information Fusion 137 (2027) 104644
DOI
10.1016/j.inffus.2026.104644

Closest papers

Nearest neighbours by meaning across the whole index.

Embedding Predictive Adaptation and Refinement for Multi-Modal Industrial Anomaly Detection

cs.CV ·2026-11-06 ·Jaeho Cho, Jinsik Bang, Taehwan Kim
published similarity 0.77
Abstract · Accepted to WACV 2027

Industrial Anomaly Detection (IAD) has evolved from 2D image-based approaches to multi-modal methods that leverage the complementary nature of RGB images and 3D point clouds. Among these, memory bank-based methods, which identify anomalies by the discrepancy between each query patch feature and its nearest normal prototype, have proven particularly effective. However, two limitations remain: (i) employing frozen pretrained encoders yields insufficient discrimination between normal and anomalous features due to the domain gap, while existing contrastive learning-based adaptation struggles to capture the spatial relationships required for precise localization; and (ii) pixel-level anomaly maps interpolated from patch-level distance scores remain coarse, lacking fine-grained detail. To address these limitations, we propose EPAR (Embedding Predictive Adaptation and Refinement). We adapt encoders by predicting the embeddings of masked regions to capture spatial relationships, together with patch-level Variance-Invariance-Covariance (VIC) regularization, resolving the poor discriminability between normal and anomalous features caused by the domain gap. We further propose a Noise Suppression Network that refines coarse maps by learning the relational discrepancy between each patch feature and its nearest normal prototype, rather than the anomaly's appearance. This relational signal remains valid for unseen real defects, despite being learned from synthetic anomalies. EPAR demonstrates strong practical applicability, excelling in few-shot settings and improving AUPRO@1% on MVTec 3D-AD and Eyecandies by +1.8% and +1.9%, respectively.

0.32

Bidirectional Adaptive Transformers for Multimodal Anomaly Detection

cs.CV ·2026-10-10 ·Yuxin Jiang, Yunkang Cao, Weiming Shen
published similarity 0.74
Abstract

The effective integration of features derived from RGB images and 3D point clouds presents a substantial challenge in the field of multimodal anomaly detection (MAD). Existing MAD methods typically rely on static fusion paradigms built upon frozen pre-trained encoders. While these frameworks facilitate spatial alignment, they lack the mechanism to establish latent semantic correspondence, thereby inducing cross-modal interference that degrades anomaly discriminability. To mitigate these limitations, this study proposes a Bidirectional Adaptive Transformers (BAT) framework, which constructs comprehensive and semantically aligned multimodal representations by leveraging complementary attributes across modalities. The BAT framework introduces a Bidirectional Feature Alignment (BFA) module, which employs a mutual predictive mechanism to bridge the gap between 2D textural patterns and 3D geometric structures. This bidirectional interaction explicitly enhances the textural granularity of point cloud descriptors while augmenting the spatial contextual awareness of RGB features. To ensure that the latent representations possess sufficient informational density for alignment, BAT incorporates a parameter-efficient adaptation architecture. By utilizing lightweight image and point cloud adapters, the framework facilitates specialized fine-tuning of pre-trained models, mitigating the information loss inherent in frozen encoders. Extensive experiments conducted on MVTec 3D-AD and Eyecandies confirm that BAT achieves state-of-the-art anomaly detection performance, significantly outperforming existing MAD methods.

0.37

GRC-Net: Global Representation Consistency Network for Unsupervised Multimodal Anomaly Detection

cs.CV ·2026-10-07 ·Seyoung Jeong, Jong Pil Yun, Sang Jun Lee
similarity 0.72
Abstract · 5 pages, 3 figures, Under Review

Automated quality inspection is essential for ensuring product reliability in manufacturing.While image-based methods effectively capture appearance-related defects, these methods are limited in detecting structural and geometric anomalies, motivating multimodal approaches incorporating 3D information. However, existing methods mainly rely on local patch-level representations, which often lead to unstable reconstruction errors even in normal regions. To address this limitation, we propose GRC-Net, which integrates a global-attention MLP to enforce global representation consistency across patch embeddings with a stable reconstruction module to improve reconstruction stability. The proposed method captures holistic contextual information through a global token and suppresses reconstruction noise by minimizing discrepancies between original and predicted embeddings. Experiments on MVTec 3D-AD and Eyecandies demonstrate that GRC-Net consistently outperforms existing methods at both image and pixel levels. Qualitative results further demonstrate reduced reconstruction errors in normal regions and more distinct reconstruction differences between normal and anomalous regions.

0.19

Robust Fault Detection in Mechanical Multimodal Time Series via Self-Supervised Cross-Modal Reconstruction

cs.LG stat.AP ·2026-09-14 ·Magnus Munk Jensen, Dorte Hammershøi, Rafał Wiśniewski, Olga Fink
similarity 0.70
Abstract · Submitted to Reliability Engineering & System Safety

Fault detection is essential in industrial systems, enabling early identification of abnormal behaviour and improving safety, reliability, and operational efficiency. Modern systems increasingly rely on heterogeneous sensing modalities that capture complementary aspects of the underlying physical process. However, existing data-driven anomaly detection methods often process each modality independently or use simple feature-level fusion, limiting their ability to exploit cross-modal relationships that characterize normal system behaviour. Their performance also commonly assumes similar training and deployment distributions, whereas real-world operation is affected by changing operating conditions, environmental influences, and system degradation that induce distribution shifts and reduce detection performance, especially in unseen regimes. In this work, we propose a multimodal anomaly detection framework based on cross-modal reconstruction of heterogeneous time-series sensor data. Rather than modeling each modality independently, the framework learns system dynamics by reconstructing each modality from the others, thereby exploiting complementary information across modalities. This integrates information across sensing channels without requiring explicit temporal alignment or identical sampling rates, while improving robustness to sensor noise, missing measurements, and modality-specific disturbances. To address distribution shifts during real-world deployment, anomalies are identified using cross-modal reconstruction error and an adaptive test-time thresholding mechanism that adjusts to changing operating conditions. Experiments on three industrial case studies show strong fault detection performance and substantially improved robustness under out-of-distribution conditions, with the largest gains observed in the most challenging operating regimes.

0.23

CORE: Contrast-and-Reflect for Self-Supervised Prompt Optimization in Anomaly Synthesis

cs.CV ·2026-10-14 ·Haoxiang Rao, Fang Zhao, Zhao Wang, Weijia Li, Chenyang Si +1 more
similarity 0.70
Abstract · 9 pages, 4 figures

Industrial anomaly detection (AD) is bottlenecked by the scarcity of anomalous samples, making high-fidelity anomaly synthesis crucial for improving downstream performance. However, existing methods either rely on scarce real anomaly references or auxiliary data, while lacking complex reasoning and iterative optimization capabilities for generating realistic defects in open-set scenarios. To address these challenges, we propose CORE, a cost-efficient and training-free prompt optimization framework based on Large Multimodal Models (LMMs), which unifies zero-shot and one-shot anomaly synthesis. CORE first introduces an Anomaly Context Grounding module to transform sparse user context into defect-aware generation context, which is subsequently instantiated as structured anomaly prompts that disentangle normal-region preservation from anomaly-specific variation, enabling controllable and faithful defect generation. Furthermore, CORE autonomously refines prompts through a self-supervised contrast-and-reflect mechanism. This design empowers general-purpose LMMs to synthesize realistic anomalies under both zero-shot and one-shot settings without task-specific training. Extensive experiments on MVTec-AD and VisA demonstrate that CORE synthesizes realistic and diverse anomalies, yielding superior improvements in downstream AD performance. Furthermore, its model-agnostic and plug-and-play paradigm enables effortless integration with diverse LMMs, facilitating adaptation to unseen open-set scenarios.

0.13

GuidedFlow: An Attention-Guided Framework for Anomaly Detection in Additive Manufacturing

cs.CV cs.LG ·2026-08-24 ·Sosmita Paul, Krishna Roy
published similarity 0.69
Abstract

Additive Manufacturing (AM) plays a vital role in the ongoing industrial revolution. However, quality control remains crucial and challenging due to printing defects or potential cyber-physical intrusions. Image or video-based anomaly detection is a key effort towards addressing these challenges. Various approaches have been explored in this domain, including reconstruction-based, embedding-based, and flow-based methods. Though normalizing flow-based methods address some of the core challenges of unforeseen defects and generalization while maintaining detection performance, existing approaches struggle with tiny/stringing defects common in 3D printing. In a small-data setting, this poses a limitation in generalization. To address these limitations, we propose \textbf{GuidedFlow}, a novel attention-guided normalizing flow model for anomaly detection and localization. GuidedFlow employs a pre-trained ResNet model, fine-tuned on the domain dataset. An attention-guided spatial and temporal flow framework models the dynamics across multiple scales and frames. A Spatio-Temporal Attention Network (SAN) enables the flow model to prioritize relevant contextual cues from input frames. We evaluate GuidedFlow on our AM3D-AD dataset, consisting of benign and anomalous real 3D printed object images and videos. We also conduct a comparative study using the MVTec-AD industrial image anomaly detection dataset. Experimental results demonstrate that GuidedFlow outperforms most of the state-of-the-art models with enhanced detection accuracy and AUROC.

0.37

Cross-Encoder Anchor Refinement for Zero-Shot Anomaly Detection

cs.CV ·2026-10-29 ·Kaisong Ji, Ziyang Xu, Chang Bian, Yu Zhou, Wenyu Liu +1 more
similarity 0.69
Abstract · 15 pages, 6 figures

Zero-shot anomaly detection aims to transfer anomaly discrimination from auxiliary training domains to unseen categories while localizing subtle defects. A key challenge is to construct discriminative references that combine contextual representations with complementary local evidence. We present Cross-Encoder Anchor Refinement (CEAR), which connects two visual encoding paths for the same image at the anchor stage, before normal and anomalous prototypes are constructed. An independent convolutional encoder pretrained for industrial product recognition builds an image-specific memory shared across selected vision transformer (ViT) layers. Spatial anchors read from ViT patch features query this memory through cross-attention and undergo residual refinement. Image-conditioned normal and anomalous queries then gate anchor aggregation to construct prototypes for anomaly scoring. Across 13 industrial and medical datasets, CEAR achieves the best performance in 57 of 68 evaluations spanning image-level detection and pixel-level localization. Notably, CEAR surpasses all other state-of-the-art methods in 41 of 44 pixel-level comparisons. Across 11 localization datasets, mean gains in pixel-level maximum F1 score and average precision are 4.45 and 3.79 percentage points, respectively. This study shows how cross-encoder interaction at the anchor stage can integrate complementary visual representations for fine-grained anomaly localization across domains.

0.08

REDiff-AD: No Training and No Target Masks for Industrial Anomaly Image Generation via Diversity-Driven In-Context MMDiT

cs.CV ·2026-11-07 ·Chih-Yu Tsai, Chih-Heng Chang, Jian-Jiun Ding
publishedcode/data similarity 0.69
Abstract · Accepted to WACV 2027

Industrial anomaly detection is challenged by the scarcity and diversity of real defects, leaving insufficient anomalous data to effectively train downstream models. Existing anomaly generation methods often require product-specific fine-tuning, target mask annotation, or costly procedures to achieve realistic and diverse defects. We propose REDiff-AD, a framework that requires neither model training nor target masks and introduces Rectified Flow MMDiT into industrial anomaly generation for efficient sampling with fewer generation steps. Given a normal product image and a single masked reference anomaly, REDiff-AD employs in-context learning to transfer the defect appearance from the reference into the normal image. Internal attention signals generated during this process are further reused to localize the synthesized anomaly, while edge and color cues refine the localization into pixel-level pseudo-masks. Two lightweight modules further improve generation quality: adaptive reference conditioning enhances defect fidelity, while diversity guidance promotes varied defect patterns without additional training. Experiments demonstrate that REDiff-AD can well address the tradeoff between realism and diversity for anomaly pattern generation and achieve competitive downstream anomaly classification, detection, and localization performance. These results show that REDiff-AD is a simple, efficient, and effective solution for large-scale anomaly data augmentation and pixel-level data construction. Github code: https://github.com/efdefe4-droid/REDiff-AD

0.39