CS Paper Radar

Planner-Controller Interaction for Ackermann Navigation: A Matched Simulation and Hardware Benchmark

Moaiz Saeed, Marah Saleh, Mounis Shawgi, Mohamed Al Musleh

cs.RO ·submitted 2026-11-18 17:42 UTC · v1
benchmarkcode/data

Abstract

Global planners and path-tracking controllers are often evaluated independently, although their interaction determines how a vehicle follows a planned path. Whether simulation accurately predicts the performance of specific planner-controller combinations on Ackermann-steered hardware remains uncertain. This study evaluated three geometric controllers (Regulated Pure Pursuit, Stanley, and Vector Pursuit) paired with two global planners (Hybrid A* and NavFn) on a 1/10-scale Quanser QCar and in a matched Gazebo simulation. Both environments used shared custom planning and control algorithms, matched route geometry and goals, ground-truth pose references, and a common evaluation pipeline. Five runs per configuration and environment yielded 60 benchmark runs. Controller rankings for tracking accuracy and command smoothness transferred consistently between environments, with Spearman correlations of 0.77-0.94. However, planner-dependent effects showed substantially weaker agreement. In simulation, planner selection changed the root-mean-square (RMS) angular acceleration of the commanded velocities by no more than 0.030 rad/s^2, whereas Hybrid A* increased it by 0.141-0.843 rad/s^2 on hardware, depending on the controller. These differences coincided with planner-dependent achieved speeds that the simulation's idealised longitudinal response did not reproduce. Mean controller computation times remained below 0.5 ms on the Jetson TX2. The findings demonstrate that agreement in controller rankings does not guarantee accurate prediction of planner-dependent performance for specific controller pairings on hardware, highlighting the importance of physical validation.

Comment
32 pages, 8 figures, 8 tables. Code: https://github.com/HWUD-AIMBeyonD/qcar and https://github.com/HWUD-AIMBeyonD/QCarSim

Closest papers

Nearest neighbours by meaning across the whole index.

Global Path Planner with Multi-Model Switching

cs.RO cs.SEeess.SY ·2026-09-11 ·Pietro Gori, Francesco Iotti, Eduard Zelenay, Rastislav Marko, Michele Pierallini +3 more
hot direction similarity 0.66
Abstract

This work enhances global path planning via a pure-pursuit controller with multi-model kinematic switching that sustains plan fidelity across diverse terrains. The system includes a traversability graph for terrain analysis, a Heading-Aware A* algorithm for generating feasible paths, and a multi-model Pure Pursuit controller for dynamic tracking. A core innovation is adaptive kinematic modeling, enabling real-time switching between kinematic models based on terrain features and robot states. This adaptability optimizes path efficiency and energy use in challenging scenarios. We validate the approach in simulation on different platforms, namely the Artaban quadruped and the X3 quadrotor drone, showcasing improved performance, robustness, and adaptability over standard baselines.

0.26

Look Only Where You Plan for Real-Time End-to-End Urban Driving

cs.RO ·2026-11-06 ·Haohua Que, Tianle Zhu, Qianyi Wu, Zhipeng Bao, Handong Yao
similarity 0.66
Abstract · 10 pages

Dense bird's-eye-view (BEV) construction accounts for 60% of the parameters in a strong recent driving planner. This paper presents LOWP, a planner that looks only where it plans: two sets of sixteen learnable queries read the cameras through the known calibration, one by sampling image features at projected 3D anchors and one by attending to features labeled with their viewing rays, so no dense BEV is built and no object or map is supervised. Evaluations on open-loop nuScenes, pseudo-simulated NAVSIM and closed-loop Bench2Drive show competitive planning with a compact representation. On nuScenes, average L2 changes from 0.302 to 0.296 m with 53% of the dense counterpart's parameters and 1.7 times its speed on the same GPU; the anchor-based reader performs better on turns than the global reader. On NAVSIM, scoring the planner's own trajectories alongside a vocabulary gives 85.9 PDMS without retraining. The closed-loop control configuration scores 65.5 on 218 routes, with a brake-induced standstill failure whose release rule has an inconclusive aggregate benefit. We distinguish measured latency from hardware-transferred estimates, which do not establish a common-hardware ranking.

0.16

GAUGE: Planner-Conditioned Active Calibration of Opaque Quadruped Velocity Interfaces

cs.RO ·2026-09-26 ·Tianhao Zang, Zihan Liu, Shanze Wang, Liyou Luo, Xingjian Xie +2 more
code/data similarity 0.65
Abstract · 8 pages

In this paper, we present a Goal-Aware Uncertainty-Guided Exploration (GAUGE) framework for planner-conditioned active calibration of opaque quadruped velocity interfaces. Commercial quadrupeds commonly expose planar-velocity commands, but the underlying locomotion controller remains inaccessible and can produce systematic discrepancies between commanded and realized motion. A navigation planner typically uses a structured subset of the command envelope. GAUGE maintains a Bayesian command-to-motion model and selects authorized trials according to their expected reduction of posterior epistemic uncertainty under the planner-induced command distribution. The resulting posterior supports validation-based stopping, bounded inverse compensation, and task-relevant recalibration after detected interface shifts. In three controlled response families, GAUGE reaches the joint criterion for task-facing accuracy and uncertainty with fewer trials than passive, D-optimal, and task-agnostic alternatives. Across six held-out Isaac Sim navigation maps, it meets the declared noninferiority margins against dense calibration. Code is available at https://github.com/EurekaZang/CalibAgent.

0.34

JEPTERA: A Platform Agnostic JEPA-Assisted Model Predictive Planner for Urban UAV Navigation

cs.RO ·2026-11-16 ·Gibran Fathoni Belva, Mansur Arief, Ahmad Alfan Alfian Irfan
similarity 0.64
Abstract · 6 pages, 3 figures. Submitted to conference

Urban navigation for Unmanned Aerial Vehicles (UAVs) requires planning that accounts for environmental geometry, vehicle dynamics, and moving obstacles. This paper presents JEPTERA, a navigation architecture that integrates a Joint-Embedding Predictive Architecture (JEPA), Model Predictive Control (MPC), PID control, and a safety layer. JEPA predicts the UAV's motion response to candidate commands for MPC action selection, while the safety layer checks trajectories against occupied space and predicted obstacle motion. Simulator adapters and platform-specific YAML configurations separate the planning core from simulator interfaces. An ablation study evaluated six configurations across three gym scenarios, totaling 180 runs. The complete architecture achieved the highest aggregate success rate, completing 28 of 30 runs. Additional tests completed one route across three city maps without collisions. Separate integration tests demonstrated operation in Gazebo/ROS 2, MuJoCo, and CARLA without modifying the core planning logic. These results support the feasibility of the integrated architecture for simulated urban UAV navigation and its portability across simulator interfaces.

0.22

Predict Before You Step: Auditable Occupancy Forecasting for Dynamic Obstacle Avoidance under Sparse Guidance

cs.RO ·2026-09-22 ·Yuhui Mao, Fen Liu, Shenghai Yuan, Tianxin Hu, Ruimeng Liu +1 more
similarity 0.63
Abstract

Legged robots under sparse waypoint guidance must avoid moving obstacles using partial, rapidly changing LiDAR observations. We present LOOP (Latent-recurrent Occupancy rollOut Policy), a local avoidance policy that connects sparse waypoint guidance to a frozen locomotion controller at 50 Hz. From occupancy and ego-velocity histories, a recurrent predictor forecasts future occupancy over a 1 s horizon by warping the current map with learned flow and visibility gates. These maps guide velocity selection through map-derived features and geometric risk estimates, providing an explicit interface for inspecting and replacing predictions. In encounter-synchronised Isaac Lab evaluations, LOOP achieves 57.1% head-on success at obstacle speeds of 2.5-3.2 m/s, exceeding a retrained reactive baseline by 8.2 percentage points. Comparisons with a rollout-free BEV policy show smaller, scenario-dependent gains from the prediction branch, including improved crossing success and reduced variability across training seeds at the highest head-on speeds. The adapter runs onboard a Unitree Go2 in 14.5 ms per step and completes all 16 real-world crossing trials without collision, demonstrating deployment feasibility.

0.17

NMPP: Nonlinear Model Predictive Planning for Agile UAV Flight in Cluttered Environments

cs.RO ·2026-10-06 ·Ondřej Procházka, Juraj Pauko, Robert Pěnička, Martin Saska
similarity 0.63
Abstract

Flying a quadrotor through a cluttered environment requires not only planning a collision-free reference trajectory based on perceived obstacles, but the reference also needs to be dynamically feasible and within the actuation limits of the vehicle, so that the controller can track it precisely. Existing methods either optimize a smooth polynomial inside a convex corridor, which limits agility, or treat obstacles as soft costs traded against tracking performance. We propose a Nonlinear Model Predictive Planning (NMPP) that imposes perceived obstacles as hard geometric constraints and hands a full-state reference to an obstacle-blind SE(3) controller. Our planner achieves a 58-67 % lower position RMSE than a linear Model Predictive Control trajectory planner and a 41-70 % lower RMSE than a polynomial trajectory planner. It also completes all forest flights with up to 9.5 m/s speed without collisions, and achieves 86 % flight success rate under a more aggressive speed profile where a state-of-the-art planner has only 26 % success rate. The real-world deployment showed reliable execution flying up to 5.5 m/s in an unknown cluttered environment.

0.19

Hardware-in-the-Loop Evaluation of Game-Theoretic Autonomous Driving

eess.SY ·2026-09-20 ·Aakanksha Kataria, Huiwen Yan, Mushuang Liu
similarity 0.62
Abstract

This paper evaluates Nash- and Stackelberg-based decision-making controllers for autonomous intersection crossing using a three-stage evaluation pipeline culminating in physical Quanser QCar 2 experiments with hardware-in-the-loop (HIL) execution. The controllers are implemented in MATLAB/Simulink, deployed through Quanser Real-Time Control (QUARC) software, and executed on the onboard NVIDIA Jetson AGX Orin processor. The evaluation includes MATLAB numerical simulation, qualitative validation in Quanser Interactive Labs (QLabs), and physical QCar 2 experiments. The experiments consider symmetric and asymmetric intersection approaches, leader-follower interactions, conflicting Stackelberg role assignments, and non-cooperative obstacle-vehicle behaviors. The results characterize the effects of hierarchy assignment, obstacle-vehicle behavior, and physical implementation on the considered game-theoretic autonomous driving controllers. Comparison between software simulations and hardware experiments further highlights the importance of accounting for sensing and state-estimation uncertainty when translating game-theoretic controllers from simulation to physical systems. A video demonstration of the QLabs simulations and physical QCar 2 hardware experiments is available at https://youtu.be/gkV6lz0twRk.

0.29

FutureRay: Control-Aligned Future Range for Agile Quadruped Navigation

cs.RO ·2026-09-26 ·Tianhao Zang, Shanze Wang, Ziqian Wang, Liyou Luo, Zihan Liu +2 more
similarity 0.61
Abstract · 8 pages

Moving obstacles can block a previously clear route while a quadruped robot executes a motion command. We investigate whether predicting changing clearance improves navigation when motion selection accounts for the robot footprint and the time needed to react and brake. We present FutureRay, which predicts ranges across viewing directions and future times, together with encounter risk, from depth-derived range history and observable robot motion. Training emphasizes near-term clearance and penalizes errors that overstate available space. A local planner queries the same forecast for candidate headings and combines it with current observations to check clearance around the robot footprint. Model-based reaction--braking limits guide speed selection, and the resulting velocity commands are passed to a fixed locomotion policy. In paired evaluations on 60 static and dynamic simulation scenes, FutureRay achieves 93.3% completion, compared with 75.0% for current-range persistence and 80.0% for Cartesian Kalman rollout, with perception, planning, and locomotion held fixed. FutureRay also records fewer collisions than both baselines. Qualitative trials on a physical quadruped show avoidance initiated while an obstacle is approaching the route, followed by renewed goal progress. These results show that joint range and encounter-risk prediction can improve obstacle avoidance without retraining the locomotion policy.

0.25