CS Paper Radar

Beyond corridor averages: Lane-level validation of microscopic freeway simulation with empirically parameterized arrivals

Korede R. Bishi, Casey Bowman, John A. Miller

cs.CE ·submitted 2026-11-18 18:13 UTC · v1

Abstract

Traffic flow modeling is an essential part of civil planning around the world, and traffic simulation is an important component of the analyses that city planners must perform to ensure safe and efficient road networks for their citizens. This work advances microscopic traffic simulation through lane-level validation of speed and flow dynamics, addressing a critical gap in conventional macro-aggregated approaches. We systematically evaluate the trade-offs between numerical integration methods and vehicle arrival processes when reproducing empirical trajectory data from California's freeway network. Results demonstrate that numerical-integrator choice has negligible impact on simulation accuracy, with less than one percent variation across eight methods, while vehicle arrival-process modeling substantially affects fidelity. The shifted Erlang-2 distribution reduces flow-prediction error by approximately 28% compared to Poisson processes by enforcing a realistic minimum headway. Lane-level validation across five detector stations reveals lane-specific dynamics that aggregated metrics often obscure.

Closest papers

Nearest neighbours by meaning across the whole index.

REARL: A Closed-loop Autonomous Driving Simulation Enhancement Framework with Real Traffic Data and Large Language Models

cs.LG ·2026-09-17 ·Xiaojun Bi, Jun Jiang, Yiwen Sun, Quanyi Ou, Yizhi Ma +4 more
similarity 0.63
Abstract · 14 pages, 8 figures, 3 tables. Corresponding author: Yiwen Sun. This work was supported by the National Natural Science Foundation of China …

Accurate simulation is crucial for autonomous driving development, yet capturing real-world traffic complexity remains challenging. Existing simulators that rely on predefined rules or static data playback struggle with dynamic traffic. CRITICAL uses real traffic data and a large language model (LLM) to adjust the initial simulation configuration, but the simulated distribution still diverges from real traffic as the rollout evolves. We propose REARL, a closed-loop simulation enhancement framework that integrates real traffic data with LLMs. Real traffic data are clustered, and each cluster center is used as a representative scenario that provides typical real-world traffic patterns for the LLM. A timed sliding-window detector then monitors discrepancies in vehicle speed distribution and mean spacing between pairs of vehicles. If a metric exceeds a threshold, the LLM adjusts vehicle decision-making; otherwise the existing controller is kept. The LLM also selects a matching real vehicle from a traffic snapshot and modulates the simulated vehicle with reference to that real action. In a controlled HighD highway setting, compared with the CRITICAL baseline and a PPO-based learning baseline, REARL reduces the Hellinger distance for speed distributions to 0.3067 and the MAPE for mean spacing to 0.8371, while achieving a time headway (THW) of 22.8575 and a lane change rate of 0.0708.

0.20

ETA Coordination at UAM Corridor Merging Points Using Worst-Case and Stochastic Trajectory Bounds

eess.SY ·2026-08-17 ·Sasinee Pruekprasert, Shinji Nakadai, Katsuhiro Nishinari
published similarity 0.62
Abstract · Accepted for publication in the proceedings of the 45th Digital Avionics Systems Conference (DASC 2026)

We study an Estimated Time of Arrival (ETA)-based traffic-coordination framework for Urban Air Mobility corridors with merging at constrained waypoints (CWPs), where approved ETAs at CWPs serve as Required Times of Arrival (RTAs). Vehicle operators submit ETA plans at the merging point for approval by corridor-management authorities before corridor entry. Corridor entry is then scheduled by enforcing pairwise ETA gaps that maintain inter-vehicle separation on shared corridor sections. We develop two trajectory bounds to compute sufficient ETA gaps: a worst-case bound based on prescribed speed limits, and a stochastic bound based on probabilistic position envelopes under acceleration uncertainty. Using these bounds, we formulate sufficient ETA-gap computation and first-come, first-served corridor entrance scheduling. Simulations show that ETA coordination improves safety over an unscheduled baseline. The worst-case bound provides stronger robustness under higher disturbance levels, whereas the stochastic bound allows higher throughput under mild disturbances while relying on probabilistic modeling assumptions.

0.24

Complete Street Design informed by Multi-Agent Simulation

cs.MA ·2026-10-20 ·Sharika J. Hegde, Amirmohammad Khakpour, Pedram Beigi, Yu, Nie +1 more
similarity 0.61
Abstract · Under review for publication in Transportation Research Record (TRR)

Objectives: Complete Street design is currently guided largely by qualitative principles despite the increasing complexity of multimodal urban traffic. This paper develops a microscopic simulation framework for quantitatively evaluating alternative street designs by explicitly representing heterogeneous road users, including Autonomous Vehicles (AVs), Connected Vehicles (CVs), Human-Driven Vehicles (HDVs), pick-up and drop-off (PUDO) services, and micromobility users. The framework jointly evaluates mobility and safety within a unified testbed. Methods:The framework enriches microscopic simulation with behavioral models for heterogeneous road users. It explicitly captures lateral movements, parking maneuvers, pedestrian crossings and jaywalking, and shared-lane bicycle and scooter interactions. Safety is quantified using a conflict severity measure grounded in collision physics, while candidate street layouts are optimized using a genetic algorithm. Findings: Applied to a segment of Belmont Avenue in Chicago, Illinois, the framework shows that dedicated bicycle lanes reduce conflict severity at the expense of vehicular throughput. Increasing AV penetration mitigates congestion by reducing traffic shockwaves while improving interactions with pedestrians relative to CVs and HDVs. The optimization framework efficiently identifies Pareto-efficient street layouts that balance mobility and safety. Novelty: The proposed framework integrates heterogeneous behavioral modeling, physics-based conflict assessment, stochastic performance evaluation, and design optimization within a single quantitative framework for Complete Street design. Practical Applications: The framework provides transportation planners with a predictive virtual testbed for evaluating street designs and quantifying the tradeoff between mobility and safety before implementation.

0.39

Empirically Calibrated Differential Games for Simulating Driver Interactions

cs.MA math.OC ·2026-10-23 ·Amirmohammad Khakpour, Nachuan Li, Pedram Beigi, Yu, Nie
published similarity 0.60
Abstract · This manuscript is intended for submission to IEEE Transactions on Intelligent Transportation Systems (IEEE T-ITS)

Game-theoretic models can resolve vehicle interactions without hand-written priority rules, but whether they describe human drivers once calibrated has rarely been tested. This study formulates a general-sum differential game of vehicle interactions at urban intersections, calibrates it to observed driving, and evaluates it on data not used for calibration. Each vehicle minimizes a cost that combines speed tracking, adherence to a map-derived lane route, control effort, gap keeping based on the intelligent driver model, a predictive conflict term, and a contact barrier, while perceiving the other vehicles with a delay. The game is solved with a feedback iterative linear-quadratic algorithm, and ten behavioral parameters per vehicle are calibrated by Bayesian optimization on trajectories recorded at four intersections in Washington, D.C. The calibrated game reproduces the trajectories of 819 vehicles with a mean position error of 1.00 m. When only each vehicle's route is known, as in a simulator, it is the most accurate of the compared models on 96 held-out vehicles (7.42 m), and ten-fold cross-validation shows that it is significantly more accurate than calibrated SUMO (by 3.61 m), an inverse reinforcement learning model (by 0.93 m), and independent and cooperative variants of the same model (by 0.33 and 0.32 m). The solutions, computed in 2.1 s for a typical interaction, are verified approximate equilibria. Finally, the conflict and steering weights, which the data do not identify, can be set from safety and comfort targets; together with a stiffer contact barrier, this removes the collisions that otherwise occur in 43% of tight closed-loop conflicts.

0.34

On the Input Sensitivity of METANET Models and the Robustness of Dynamic Calibration

eess.SY ·2026-09-30 ·Cameron Hickert, Shreyaa Raghavan, Cathy Wu
published similarity 0.60
Abstract · Accepted at the 65th IEEE Conference on Decision and Control. C. Hickert and S. Raghavan contributed equally to this work. 8 pages, 5 figure…

While traffic modeling and control rely upon effective calibration of macroscopic traffic simulation models like METANET, recent empirical work shows these models can exhibit severe sensitivity to input noise. This paper explains this phenomenon through a string-stability analysis, demonstrating that a calibrated METANET model can amplify small additive perturbations to boundary conditions along the corridor, causing the simulated state to diverge from the nominal baseline. The input sensitivity in off-nominal cases may compromise the model's capabilities for counterfactual analysis, which is required for use cases of interest like the design of large-scale variable speed limits. To address these issues, this work demonstrates how a dynamic, time-varying approach to calibrate model parameters can achieve robustness and improved accuracy of the resulting macrosimulation. We show analytically that under stated regularity and perturbation assumptions, dynamic calibration achieves a tighter cost deviation bound than static calibration, and we validate this behavior in highway environments with synthetic and real-world data. Ultimately, this can enable more trustworthy traffic simulation and more effective evaluation of control strategies.

0.26

Inferring Urban Mobility Interactions from Aggregated Dynamics

cs.LG ·2026-09-07 ·Yi Wang, Jing Li, Jinliang Deng, Zhenghong Wang, Yizhi Zhang +3 more
similarity 0.60
Abstract

Real-time urban governance depends not only on knowing where people are, but on how they move between places, directional flows that could be conventionally resolved by tracking individuals through space, i.e., expensive to sustain and built on traces that are highly unique and readily re-identifiable. Here we show that this directional structure need not be observed to be known: aggregated counts which cities already collect retain enough information to reconstruct the temporal evolution of origin-destination (OD) matrix. Using an uncertainty-aware physics-informed framework, we infer future OD flows from area-level counts alone across twelve mobility datasets from cities in the United States and China, reaching accuracy comparable to models that take historical OD matrices as input. Probabilistic modeling corrects the systematic underestimation of sparse, high-value corridors and yields calibrated predictions consistent with observed flows. Architectures that respect the generation-before-assignment logic of transport planning recover interactions more faithfully, indicating that location-level spatial heterogeneity should be preserved before pairwise interactions are reconstructed. Because inference requires only aggregated observations after training, recovering interactions this way reduces reliance on continuous individual-level tracking, pointing toward a more deployable and less exposure-heavy basis for real-time urban intelligence.

0.14

A Collision-Aware Predictive Rerouting Framework for Connected and Automated Vehicles

eess.SY ·2026-10-13 ·Tony Kinchen, Ting Bai, Andreas A. Malikopoulos
benchmark similarity 0.59
Abstract · 15 pages

In this paper, we investigate the problem of mitigating non-recurrent congestion in urban transportation networks through predictive and adaptive routing for connected and automated vehicles (CAVs). We propose a collision-aware predictive rerouting framework that integrates microscopic SUMO simulation, DCRNN-based spatiotemporal traffic-state forecasting, collision-window lookahead, and multi-objective route scoring. The routing controller uses predicted congestion, live emission information, route-length penalties, and incident-window constraints to decide when CAVs deviate from their current routes. The completed simulation campaign across three urban network scenarios, five CAV penetration levels, three random seeds, and multiple benchmark rerouting strategies shows that the proposed full framework does not dominate all baselines in aggregate travel time, distance, or emissions. Instead, its principal advantage is operational stability: it maintains comparable network-level efficiency while substantially reducing rerouting frequency relative to active rerouting baselines. These results demonstrate both the promise and the tradeoffs of embedding graph-based prediction and collision awareness into real-time CAV rerouting, and they motivate further work on forecast calibration, uncertainty-aware prediction, and system-level fairness between CAV and non-CAV traffic.

0.11

A Graph Neural Network Surrogate Model for Incident-Based Travel Time Prediction Under Limited Sensor Data

cs.CE ·2026-09-13 ·Abhilasha Saroj, Natalie Myers, Haoran Niu
similarity 0.59
Abstract

Localized roadway incidents can produce congestion well beyond their point of origin, but evaluating these effects with microscopic simulation requires a separate run for each scenario. This paper presents a Spatio-Temporal Graph Convolutional Network (STGCN) for forecasting route-level travel times on a simulated Nashville, Tennessee road network with 1,037 junctions and 1,601 road segments. The model uses directional traffic counts from only 129 signalized intersections, reflecting data commonly available to transportation agencies. By representing these intersections as a graph, the STGCN jointly captures spatial dependence and temporal traffic evolution to learn how localized disruptions propagate through the network. We compare a baseline trained on 80 incident-free simulations with an incident-inclusive model trained with an additional 360 lane-blockage scenarios across 12 locations and three durations. The baseline achieved a relative mean absolute error (MAE) of 9.94%. The incident-inclusive model achieved 9.67% overall, 6.45% during active incidents, and 13.62% at 30 incident locations withheld entirely from training. On disrupted routes, its predictions were within 2.0 minutes of observed travel time on average. For comparison, simulated travel times vary by 7.4%, or 1.3 minutes, across random seeds under identical conditions. Inference requires approximately 53 ms on a single CPU core, demonstrating the potential of the model as an efficient surrogate for transportation resilience screening, incident management, and proactive rerouting.

0.17