CS Paper Radar

FPGA-GEN: Target-Aware RTL Generation via HLS

Luke Ztz Hu, Zhihan Xiao, Zhe Zhao, John Imoleayo Adebisi, Han Gao, Linxiao Yan, Songping Mai

cs.AR cs.AI ·submitted 2026-11-19 01:48 UTC · v1

Abstract

Successful C/C++ compilation does not guarantee correct or efficient FPGA hardware after high-level synthesis (HLS). FPGA-GEN is an agentic HLS-C generation workflow that encodes specification, readiness, selection, repair, and admission rules in explicit task contracts and bounded tool-feedback loops for candidate-level decisions. On HLS-Eval, five shared-context outputs per task yield 407/425 (95.8%) public-testbench passes. In a cumulative conversion campaign, FPGA-GEN admits 104/107 (97.2%) HLS-LeVeri designs under held-out co-simulation, Vivado synthesis/fit, and same-RTL evidence. In focused TensorCore screening, selected candidate 3 reports 73.7% fewer CSynth cycles and 14.6% fewer LUTs than generated/composed C0, with 26.7% more DSPs, and passes development CoSim.

Closest papers

Nearest neighbours by meaning across the whole index.

SYNTLOG: FSM Benchmarks Evaluation for FPGA

cs.AR ·2026-08-24 ·Samary Baranov, Danila Gorodecky
benchmark similarity 0.64
Abstract

We introduce a curated benchmark collection of \num{101} FSM descriptions organized into five size classes (\emph{small}, \emph{medium}, \emph{large}, \emph{huge}, \emph{super-huge}), spanning tens to thousands of states and up to hundreds of inputs and outputs. Using these benchmarks we compare an architecture-independent synthesis tool SYNTLOG against Xilinx Vivado at the synthesis (technology-mapping) level, under six optimization strategies. We compare three post-synthesis parameters: number of LUTs, number of logic levels, and runtime. SYNTLOG in area-driven mode uses substantially fewer LUTs than Vivado's area baseline at every size ($-45\%$ to $-66\%$), and its delay-driven mode is simultaneously shallower in logic depth than Vivado's default synthesis mode. SYNTLOG synthesis includes embedded functional validation. Runtime of SYNTLOG is faster by one to two orders of magnitude than Vivado synthesis. The proposed tool synthesizes and validates every \emph{huge} and \emph{super-huge} circuit in minutes, whereas Vivado fails to terminate on these designs after hours.

0.21

Native FPGA Hard-Block Implementation from High-Level Synthesis

cs.AR ·2026-11-18 ·Mohamed Bouaziz, Mahmoud A. Elshenawy, Krishnan B. Iyer, Abdurauf Abdurakhmanov, Ammar M. Seliaman +1 more
similarity 0.64
Abstract

High-level synthesis (HLS) maps computations to FPGA hard blocks, yet often leaves their arithmetic modes, internal registers, and cascade links idle and recreates them in the fabric, costing area and timing. We present a C++ template library that reaches native hard-block implementations without modifying the HLS compiler. Templates fix source patterns, and an automatic flow picks scheduling settings and verified RTL patches. On AMD Versal, our matrix multiplication uses 2.4--4.5x fewer lookup tables (LUTs) than AutoSA systolic arrays at equal or higher estimated throughput. Our INT8 matrix--vector units reach the three multiply--accumulates per DSP of hand-written FINN RTL, versus at most 1.29 for HLS libraries. In hls4ml, Allo, and Stream-HLS, the templates cut LUTs by up to 2.7x and DSPs by up to 2x.

0.19

Quantifying the Effect of HCLs on a Fixed-Microarchitecture MXFP4 Accelerator

cs.AR ·2026-09-16 ·Daniele Passaretti, Sajjad Tamimi, Nicola Dall'Ora
published similarity 0.62
Abstract

Hardware Construction Languages (HCLs) aim to improve hardware design productivity while generating register-transfer-level (RTL) circuits without changing the designer's microarchitecture. However, most comparisons between HCLs are either qualitative or evaluate quality of results (QoR) across different designs, making it difficult to separate language effects from design effects. This paper compares the most widely used HCLs using the same fixed design, the OCP MXFP4 block dot product, a quantization primitive at the heart of edge Physical-AI inference, implemented as a single 12-stage, II=1 pipeline. A SystemVerilog baseline is followed by implementations in Chisel, SpinalHDL, Amaranth, Clash, Bluespec, and C++ for high-level synthesis (HLS). Every variant goes through the same flow on the same Artix-7 device set at 100 MhZ, driven by a RISC-V soft core. With the micro-architecture held constant, the comparison is clean: every variant meets timing, and the HCLs match or even undercut hand-written RTL in area. The remaining differences stem not from the algorithm but from how each back end lowers arithmetic, and from a single width choice that silently toggles DSP inference. Unlike HLS, where design decisions are limited to pragmas, the HCLs achieve comparable area and timing. Therefore, the choice comes down to ecosystem fit and interface needs rather than QoR.

0.36

FPGAgent: An LLM-Assisted Framework for Autonomous HLS Code Generation and Verification in FPGA Environments

cs.SE ·2026-08-23 ·Tianyu Wang, Wenjie Wang, Jianguo Yao, Haibing Guan, Xijun Li
benchmark similarity 0.61
Abstract

Large language models (LLMs) have shown substantial promise for high-level synthesis (HLS) code generation, but most existing approaches validate only simulation or synthesis results. Because of timing and place-and-route constraints, \emph{HLS code that passes simulation and synthesis may still fail to produce deployable, runnable designs on real FPGA platforms}. Moreover, the lack of public benchmarks has limited many evaluations to small, self-curated test suites. We propose FPGAgent, a multi-agent framework tailored to real FPGA environments for autonomous HLS coding with end-to-end executability validation. To the best of our knowledge, FPGAgent is \emph{the first task-specification-to-executable HLS generation framework experimentally validated on a well-established benchmark}. Given a natural-language task specification, FPGAgent injects HLS-specific knowledge and employs evolutionary search to iteratively derive reliable HLS kernel implementations. It then generates a C++ validation program to verify functional correctness, diagnoses potential defects, and guides targeted repairs. Finally, it synthesizes host code for compilation and board-level execution on FPGA hardware. We comprehensively evaluate FPGAgent with five established LLMs on HLS-Eval, a benchmark containing 78 tasks across multiple domains, and verify board-level executability on a real FPGA platform. Compared with existing baselines, FPGAgent improves the synthesizable rate by 16.9% on average, executability by 26.7%, and functional correctness by 30.6%. These results show that FPGAgent substantially improves the practical usability of LLM-based HLS generation and demonstrates the value of end-to-end validation.

0.49

Can Agents Design Better Chips with a Higher Level Abstraction?

cs.AI cs.AR ·2026-09-17 ·Zijian Ding, Yang Zou, Yizhou Sun, Jason Cong
publishedbenchmarkcode/data similarity 0.60
Abstract · 7 pages, ICCAD'26 special session

Large Language Model (LLM) agents are increasingly being explored for chip design, but most existing approaches operate directly at RTL. We ask whether agents can design better chips by leveraging higher-level abstractions. We compare Direct RTL Design, Agent-based HLS Design, Post-Compiler HLS Refinement, and Post-HLS RTL Refinement, and combine Agent-based HLS Design with Post-HLS RTL Refinement as Agent-based HLS with RTL Refinement (AHRR). We use FPGAs as a practical, easy-to-deploy platform for end-to-end evaluation, but note that the design-flow tradeoffs we study are largely independent of the target technology. Across a diverse 11-tasks benchmark suite, AHRR achieves a 2.6$\times$ geometric-mean speedup over Direct RTL Design across our benchmark suite. Case studies show that HLS distills design knowledge into abstractions that agents can leverage, while RTL refinement recovers lower-level optimization opportunities. Together, these results make AHRR a promising workflow for agentic chip design. The code and evaluation artifacts are available at https://github.com/ZijD/AHRR.

0.57

LLM Agent-Based Design of RISC-V CPUs with FPGA-in-the-Loop Evaluation

cs.AR cs.AI ·2026-10-29 ·Leo Itoh, Junichiro Kadomoto
code/data similarity 0.59
Abstract · 5 pages, 6 figures, 2 tables. Submitted to IEEE ISCAS 2027. Code and data: https://github.com/kadomoto-lab/llm-cpu-fpga-loop

Long-run RTL simulation of CPU candidates can take hours, while short diagnostic runs may miss performance degradation that emerges later in execution. This evaluation cost can delay design decisions in LLM-agent-based CPU development. We present a development environment in which LLM agents implement CPU candidates on an FPGA and use on-board performance measurements to guide design decisions. We applied it to the human-supervised development of a single-cycle RV32I core into a three-wide out-of-order RV32IM core. The final design reaches 5.61 CoreMark/MHz at 130 MHz on a Artix-7 FPGA. For the same CPU candidate running 8,000 CoreMark iterations, FPGA evaluation, including implementation, was 9.6x faster than single-threaded RTL simulation. In one case, board measurements revealed long-run performance degradation in a candidate that improved in a short diagnostic run. The result guided candidate selection and led to RTL-based root-cause analysis and a fix.

0.37

GRADE-RTL: Evaluating LLM-Generated RTL Beyond Compilation

cs.AR cs.PL ·2026-09-21 ·Hepziba Susan, Shivaranjani G. R., Malik Imran, Muhammad Rashid, Sumathi Gokulanathan +1 more
similarity 0.57
Abstract

Large language models (LLMs) can generate register-transfer-level (RTL) code from natural-language specifications, but compilation alone does not establish structural completeness, functional correctness, or implementation efficiency. This paper presents a framework for evaluating LLM-generated RTL beyond compilation, which we named GRADE-RTL. Using fixed prompts and validation settings, GRADE-RTL applies five checks, such as Port Signature, Compilation, Elaboration, Module Completeness, and Functional Equivalence against trusted reference RTL. With the help of compact metrics, we identify where candidates fail and distinguish end-to-end success from eligibility for downstream synthesis. We evaluate nine general-purpose and RTL-specialized LLMs on ten edge-relevant intellectual property designs under a budget of three generation attempts with failure-directed feedback. End-to-end success ranges from 0% to 70% across the evaluated models, with failures extending beyond compilation to hierarchy resolution, incomplete logic, and behavioral mismatch. FPGA implementation and 65 nm ASIC synthesis results further show that functionally equivalent RTL can differ substantially in resource use, timing, area, and power. A PID-controller place-and-route case study illustrates the physical-design consequences of different RTL implementations. GRADE-RTL provides a practical basis for comparing LLM-generated hardware descriptions by separating structural validity, behavioral correctness, and implementation quality.

0.44

RLX: A Unified Multi-Backend Tensor Compiler and Distributed Runtime in Rust

cs.DC cs.AI ·2026-09-29 ·Eugene Hauptmann, Nataliya Kosmyna
published similarity 0.57
Abstract · 6 pages, 4 figures, peer-reviewed and presented at 2026 IEEE High Performance Extreme Computing Conference (HPEC)

Production machine learning (ML) stacks often split graph compilation and kernel execution across different layers and languages, making backend behavior, deployment guarantees, and performance fallbacks hard to reason about end-to-end. RLX addresses this gap with a single Rust codebase that combines compiler and runtime roles around one primitive-level, three-level intermediate representation (IR), plus a transparent dispatch contract that resolves each operator to native, common-IR, or rewritten lowering and fails compilation when legalization is not possible. The same IR targets fourteen runtime devices (cpu, metal, mlx, ane, cuda, rocm, oneapi, tpu, hexagon, gpu, vulkan, opengl, directx, webgpu) and two specialty codegen paths (Cortex-M INT8 and FPGA), ingests safetensors, GGUF, ONNX, and rten formats, supports F16/BF16/F64/C64 and quantized INT4/INT8 flows with AMP/PTQ/QAT, and scales via tensor-/pipeline-parallel collectives over TCP and RDMA transports. Beyond neural workloads, RLX also extends to scientific/physics-style domains through sparse and dense linear algebra extensions (e.g., CSR LU/CG/matvec and LAPACK- backed factorizations) and 3D Gaussian splatting operators. We evaluate RLX against PyTorch, TensorFlow, JAX, candle, burn, tch, rten, MLX, CoreML, IREE, Glow, TensorRT, and tinygrad under identical input generation and p50 measurement methodology on one host. On all-MiniLM-L6-v2, RLX-Metal is fastest at every batch (e.g., 16.6 ms at batch 32 vs. PyTorch-MPS 26.7 ms). In the MNIST training table, RLX also has the top-throughput entry (graph-fused MLP: 946,487 img/s), above NumPy+BLAS (787,349 img/s), while retaining 100% top-1 parity on reference checks (e.g., Qwen3).

0.34