CS Paper Radar

Tenon: A Unified Programming Framework for Retargetable PIM Compilation

Niansong Zhang, Shiran Guo, Zhiru Zhang

cs.PL ·submitted 2026-11-19 07:23 UTC · v1
published

Abstract

Processing-in-memory (PIM) is emerging as a building block of heterogeneous systems for memory-bound workloads, and commercial prototypes now span near-bank SIMD engines, bank-level GDDR accelerators, programmable DRAM cores, and bit-level in-SRAM processors. Their programming stacks are fragmented: no abstraction or compiler is shared across vendors, and per-device models range from instruction sequences to C-like languages. Data layout further complicates the problem: tight compute-memory integration makes data layout a first-order optimization, yet existing PIM compilers lack a unified way to represent and optimize it. A key observation is that PIM compilation targets can be modeled as nested grids of compute and storage units connected by legal data-transfer paths. We present Tenon, a unified programming framework for retargetable PIM compilation. It decouples workload, compilation target, and cost specifications, so a workload is expressed once and compiled through a unified programming framework. Tenon generalizes the $\mathbb{F}_2$ linear layout algebra from GPU compilers to map logical work and data onto these compute and storage grids. It automatically constructs a minimum-movement data layout given a workload and a target specification. We evaluate Tenon on six PIM backends: five commercial backends and AttAcc, a state-of-the-art academic HBM-based PIM architecture. Across the commercial backends, it matches or outperforms vendor, expert, and compiler baselines, with geometric-mean speedups of up to $1.20\times$ and individual speedups up to $3.65\times$. For end-to-end GPT-13B decoding on AttAcc, Tenon-compiled workloads run $1.2$--$1.3\%$ faster than those compiled by DCC, a state-of-the-art PIM compiler, across all three batch-4 configurations. Together, these results demonstrate Tenon's performance portability across diverse PIM target families.

Comment
HPCA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Compiling Semi-Ring Dynamic Programming to Tier-Aware 3D-DRAM Processing-in-Memory

cs.AR ·2026-10-06 ·Mahbod Afarin, Tsung-Han Lu, Tajana Rosing
similarity 0.73
Abstract

Processing-in-Memory (PIM) on monolithic 3D (M3D) DRAM is a promising answer to the memory wall for data-intensive dynamic programming (DP), yet extracting its performance today demands hand-written kernels: the programmer must pick a tile size, place data across non-uniform-latency memory tiers, partition work between heterogeneous processing units, and insert the right broadcasts and queues by hand. We present GenMLIR, an MLIR compiler that automates this mapping for tier-aware 3D PIM. GenMLIR encodes the semi-ring generalized grid update, the algebraic form shared by all-pairs shortest path (APSP) and sequence alignment, as a first-class IR abstraction, and lowers it through four GenDRAM-aware pass groups that derive blocked tiling, tier-aware placement, tile-to-PU assignment, and explicit communication. We also characterize precisely which DP recurrences the abstraction admits and which it does not. On the GenDRAM architecture, GenMLIR-generated code runs up to 5.8 (APSP) and 16.7 (alignment) faster than a lowering without compiler support, and 1.2-1.4 faster than a standard affine-tiling PIM compiler we also implement, reaching 90-100% of an achievable-performance bound. It expresses these workloads in 4-9 lines instead of 300-500 and compiles in a negligible fraction of runtime.

0.22

SPMW: A Grid-Based Programming Model for Scalable Accelerator Design

cs.PL cs.AR ·2026-11-06 ·Hongzheng Chen, Shihan Fang, Niansong Zhang, Sunwoo Kim, Weiran Liu +1 more
similarity 0.72
Abstract

Modern accelerators specialize recurring computation and replicate it across regular hardware structures to achieve high performance. Sustaining this parallelism requires equally deliberate data delivery. Yet design tools often express these structures as sequential programs or flatten them into separate hardware modules and connections. This obscures shared patterns and leads to repeated compiler work. We introduce Single Program, Multiple Connected Work Units (SPMW), a grid-based programming model for scalable accelerator design that makes grid regularity a first-class abstraction. SPMW decouples local work-unit behavior from grid connectivity and data delivery. To our knowledge, SPMW is the first programming model to retain regularity throughout the compilation process, combining behavioral HLS with structural RTL generation for both fixed-function and domain-specific instruction-programmable accelerators. We implement SPMW with a Python frontend and an MLIR-based compiler that synthesizes each distinct kernel configuration once for reuse across independent hardware instances. Preserving regularity also enables parallel compilation and functional simulation to accelerate iterative design feedback. We use SPMW to generate a 32x32 systolic array that reduces GEMM latency and parallel kernel-to-RTL compilation time by 4.36x and 619x relative to AutoSA. Our FFT achieves up to 2.65x lower latency than HP-FFT. Our mini-TPU and our SPMW implementation of the FEATHER accelerator demonstrate complex composition and outperform their RTL baselines. Parallel functional simulation provides up to 18.4x speedup over Vitis HLS C simulation on the mini-TPU workloads. SPMW is also agent-friendly: given the same design specification, all five coding agents produce SPMW designs that satisfy the correctness and latency requirements, with 7.51x lower token usage than for SystemVerilog.

0.19

CMD: An Integrated CGRA Framework with Cluster-Based Distributed Memory Design

cs.AR ·2026-09-05 ·Shangkun Li, Cheng Tan, Zeyu Li, Jinming Ge, Jiawei Liang +4 more
published similarity 0.71
Abstract · Accepted by ICCD 2026

Coarse-Grained Reconfigurable Arrays (CGRAs) are a promising solution for achieving high energy efficiency and reconfigurability across various application domains, but their performance is often crippled by rigid memory architectures that limit the number and location of tiles that can access data memory. This creates a significant bottleneck for kernels with intensive memory accesses. To address this, we propose CMD, an integrated CGRA framework featuring cluster-based distributed memory design with a co-designed compilation toolchain. The compiler includes a novel memory-aware mapper and a design space exploration (DSE) mechanism that identifies the optimal memory architecture design for specific kernels. Experimental results show that our post-DSE CMD CGRAs achieve an average speedup of $1.39\times$ over a conventional CGRA while simultaneously reducing the total area to an average of $0.912\times$ of the conventional CGRA.

0.20

Annotation-Driven Migration of CUDA Programs to Tenstorrent Blackhole

cs.DC ·2026-10-02 ·Ayumi Ohno, Shinya Takamaeda-Yamazaki
similarity 0.71
Abstract · Accepted at the Thirteenth Workshop on Accelerator Programming and Directives (WACCPD 2026)

Tenstorrent Blackhole combines distributed local memories, explicit inter-core communication, and Tensix cores decoupling data movement from computation. CUDA offers a substantial HPC software base but leaves physical data placement and scheduling largely implicit. Migrating CUDA HPC kernels to Blackhole requires spatial mapping across cores and per-core coordination of compute and data-movement kernels. We present an MLIR-based compiler deriving data placement, inter-core communication, and tile computation from a statically shaped affine CUDA subset. Declarative annotations express choices not fixed by the source, including compute/DM operation placement and streaming granularity. We evaluate it on Gaussian elimination, five-point stencil, and symmetric rank-k update. Relative to our compiler's default realizations, the best measured configurations achieve a 4.2x speedup for BF16 Gaussian and 2.1-2.2x for FP32 Gaussian and Jacobi. A choice's performance impact can reverse with surrounding policies, precision, and loop schedule, motivating comparison of alternative per-core realizations rather than independent policy selection.

0.24

Reconstructing Fine-grained Memory Reuse Structure in GPU Kernels

cs.DC cs.PFcs.PL ·2026-11-10 ·Yanbo Zhao, Yueming Hao, Zecheng Li, Mao Lin, Shuyin Jiao +3 more
similarity 0.71
Abstract

Optimizing GPU data movement requires knowing which instructions access the same data and across which execution scopes reuse occurs. Existing profilers can attribute memory behavior to individual instructions but do not expose the reuse relations among them, while aliasing, dynamic indexing, and runtime parameters prevent static analysis from establishing these relations in general. Cycle-level simulation can reconstruct such relations, but at costs prohibitive for production workloads. We introduce two abstractions for representing this structure: Topological Distance, which labels each dynamic memory access with the smallest execution scope (thread, warp, block, or grid) containing its most recent reuse, and PCDepGraph, which organizes these labels into a PC-level graph of the kernel's memory reuse structure. Defined over logical execution scopes rather than transient hardware state, the representation remains stable across runs and GPU targets while directly indicating the sharing scope that candidate optimization mechanisms must cover. Our tool, cuVein, reconstructs PCDepGraph directly from optimized binaries, without sampling, at generally under 10x overhead. Across HPC and AI workloads on NVIDIA RTX 4090 and H100, optimizations guided by PCDepGraph eliminate up to 90.18% of memory instructions and yield up to 2.84x kernel speedup; reuse-scope distributions remain consistent across platforms, supporting that the representation captures program structure rather than transient hardware behavior.

0.21

Retargetable Compilation for Tensor Kernels via a Unified Layout Abstraction

cs.PL ·2026-11-10 ·Likai Ma, Renze Chen, Tianqi Li, Yuhao Luo, Youwei Xiao +3 more
hot direction similarity 0.70
Abstract

Modern hardware accelerators achieve high performance through specialized instructions coupled with tightly managed memory hierarchies. These instructions impose strict layout requirements on their operands: where tensor fragments reside, how they are organized, and how parallel units access them. Such instruction-visible layout is critical to kernel performance, as it determines whether instructions execute correctly and how much data movement they incur. However, existing compilers either scatter layout requirements across handwritten programs and local scheduling rules, or provide layout representations and conversions specific to a single class of targets. Both approaches expose the same abstraction gap: the absence of a unified model for instruction layout requirements across backends. This paper presents Arknife, a retargetable compiler that treats instruction-visible layout as first-class instruction semantics. Its central idea is a constraint-based layout algebra: tensor layouts map logical axes to hardware axes spanning parallel levels and memory spaces. Instruction operands declare layout requirements, and target-provided repairs resolve conflicts. Layouts are then solved globally across the program. ISA-specific layout facts are supplied by target-side instruction descriptions rather than hardcoded in the compiler. Retargeting reuses the layout algebra and solver while defining the new target's instructions and their operand requirements. We evaluate Arknife across x86 CPU, Hexagon NPU, and NVIDIA A100 GPU. Arknife matches cuBLAS on A100, and on x86 and Hexagon outperforms vendor-optimized libraries by $2.17\times$ and $3.78\times$ and the retargetable compiler MISAAL by $5.08\times$ and $4.53\times$, respectively.

0.47

Compiler and Hardware Co-Design for Accelerator Architectures

cs.AR ·2026-09-24 ·Karl Herman Krause, Emad Jacob Maroun, Martin Schoeberl
similarity 0.69
Abstract · 8 pages, 4 figures

Heterogeneous accelerator architectures offer an efficient path to performance for compute-intensive workloads. However, full-stack integration remains difficult. We present EAAC (Extensible Accelerator Architecture), a flexible and extensible compiler and hardware architecture designed to lower the overhead of hardware-compiler co-development for rapid prototyping of hardware accelerators. EAAC targets static data-flow workloads with predictable memory access patterns. By using MLIR, we enable possible integration with a range of different frontends that emit MLIR. And by providing a minimal set of compiler functionality that enable necessary data-orchestration we lower the effort needed to get a simple implementation of a hardware acceleration unit up and running, while providing a relatively blank and un-opinionated starting point for further work. We validate this approach with a prototype GEMM accelerator combining a systolic array unit with an embedded RISC-V core, compiled end-to-end through the EAAC MLIR pipeline. On a synthetic fully-connected-layer workload, the accelerator achieves a 28x speedup in execution time over a RISC-V-only baseline, with the GEMM operation itself accounting for only 1.64\% of total execution time. We further characterize the compiler's hardware-semaphore allocation, showing that the number of semaphores required scales linearly with instruction count in the worst case, and identify this as a concrete target for future optimization.

0.23

Tile-Based Decompression in Compiled GPU Engines

cs.DB cs.DC ·2026-10-23 ·Antonio Boffa, Ananya Gupta, Hamish Nicholson, Anastasia Ailamaki
top venue similarity 0.69
Abstract · 15 pages, 6 figures, 3 tables. Accepted to PVLDB Vol. 20

Modern GPUs reach record analytical performance only when a query's working set fits within its GPU memory budget, and that budget is under growing pressure: GPUs are partitioned and shared, working sets are outgrowing high-bandwidth memory (HBM), and HBM is a fixed on-device resource whose per-dollar capacity has stagnated across generations. Lightweight compression can relieve this pressure by shrinking both footprint and bandwidth demand, but existing GPU compressed-execution techniques either bind decompression to a specific execution model or materialize decompressed columns in HBM before query execution. We present a compression subsystem for compiled GPU query engines that treats decompression as a first-class physical operator. Compression-specific logic is isolated behind a narrow backend interface, so new GPU-oriented encodings can be added without rewriting downstream operators. We implement the design in Proteus and study where decompressed values should be materialized in the GPU memory hierarchy. Our compiler-integrated shared-memory strategy fuses cooperative tile decompression with tuple-at-a-time query execution inside a single generated GPU kernel, avoiding decompressed-column materialization in HBM. Compared with HeavyDB and Sirius on GPU-resident data, fused on-chip decompression achieves competitive query times while reducing the resident memory footprint by up to 4x and memory-bandwidth consumption by up to 6x.

0.33