CS Paper Radar

Mitigating Row Buffer Contention Through Multiple Row Buffer (MRB) DRAM

K Chitra, Arjun Dey, Aryabartta Sahu, Minesh Patel

cs.AR ·submitted 2026-11-19 08:24 UTC · v1

Abstract

DRAM chips contain multiple banks to handle sev- eral memory requests in parallel. However, requests to different rows of the same bank (e.g., from different cores or workload access patterns) interfere with each other by contending for a single shared row buffer. This introduces row buffer conflicts, which incur performance and energy overheads. In this work, we reduce row buffer conflicts caused by interference by introducing multiple row buffers in each bank. We propose multiple row buffer (MRB) DRAM, which employs a primary global row buffer along with multiple secondary SRAM row buffers in the DRAM chip. These secondary SRAM row buffers act as a cache that enables each bank to serve requests to multiple rows in parallel, thereby improving performance and reducing row buffer conflicts. Our evaluation shows that MRB-DRAM with four SRBs per bank improves performance by an average of 29.7%, 24% in singlecore, multicore systems, respectively, compared to a conventional DDR4 baseline with a modest area overhead of 2%.

Closest papers

Nearest neighbours by meaning across the whole index.

SBA: A Practical Memory Performance Denial-of-Service Attack

cs.AR ·2026-11-12 ·Amin Mamandipoor, Connor Rudy Sullivan, Cole Ridge Strickler, Mohammad Alian, Heechul Yun
top venue similarity 0.72
Abstract · Accepted for publication at the 3rd Microarchitecture Security Conference (uASC 2027)

Modern cloud platforms use memory bandwidth regulation to isolate co-located workloads, implicitly assuming that high aggregate bandwidth consumption implies high interference. We show that this assumption is fundamentally flawed. We present the Single-Bank Attack (SBA), a practical memory denial-of-service attack that induces extreme cross-core slowdowns---over three orders of magnitude on memory-intensive victims (e.g., LLM decode)---while consuming less than 1 GB/s of memory bandwidth. SBA exploits the gap between peak and worst-case DRAM throughput by concentrating memory write operations on a single bank, forcing persistent row conflicts and frequent write draining, thereby collapsing the memory service rate. Across Intel and AMD systems, including DDR5- and HBM2E-based platforms, SBA consistently causes orders-of-magnitude slowdowns under realistic multi-tenant settings, revealing a fundamental limitation of bandwidth-centric memory isolation. We further show that this localized contention propagates system-wide: single-bank congestion saturates memory controller queues and induces back-pressure into shared cache and coherence structures, ultimately throttling memory request injection across cores. Consequently, severe interference can arise even at low aggregate bandwidth, evading existing bandwidth-based QoS mechanisms such as Intel RDT MBA. To address this limitation, we propose IQ-MemGuard, a lightweight, software-based memory bandwidth regulator that detects sustained contention using microarchitectural signals and selectively throttles pathological request injection. Our implementation on an Intel platform effectively mitigates SBA, whereas Intel's hardware QoS mechanism fails completely.

0.41

MORDOR: Mitigating Overheads of Read Disturbance Preventive Operations via Elastic Refresh Scheduling

cs.CR ·2026-10-08 ·Maria Makeenkova, Ataberk Olgun, F. Nisa Bostancı, İsmail Emir Yüksel, Spiros Galanopoulos +1 more
top venue similarity 0.70
Abstract · 14 pages paper content, 20 pages with references and appendix, 14 figures, accepted at MICRO 2026

Modern DRAM chips are susceptible to read disturbance phenomena such as RowHammer, where repeatedly accessing (hammering) a row of DRAM cells (i.e., a DRAM row) induces bitflips in other physically nearby (victim) DRAM rows. A common practice to avoid such bitflips is to preventively refresh victim rows that might otherwise experience bitflips. Unfortunately, preventive refreshes cause long latencies and need to be performed urgently before the aggressor row is activated again to ensure data integrity. This is done by prioritizing them over demand memory requests, thereby potentially imposing significant delays on those requests and causing performance and energy overheads. Our goal in this work is to alleviate these overheads by scheduling preventive refreshes off the critical path of demand memory requests. We propose MORDOR, a new preventive refresh scheduling policy that significantly reduces system performance degradation and energy consumption caused by preventive refresh operations. MORDOR is integrated into the memory controller and operates alongside memory-controller-based read disturbance mitigation techniques to intelligently delay preventive refresh operations, while maintaining their data integrity guarantees. MORDOR leverages the key observation that a preventive refresh operation targeting an aggressor row can be delayed to serve any other demand memory request, as long as that memory request does not access the aggressor row. By doing so, MORDOR executes latency-critical memory requests before long-latency preventive refresh operations, while mitigating read disturbance bitflips. We evaluate MORDOR by integrating it into six state-of-the-art read disturbance mitigation techniques. Our comprehensive evaluation shows that MORDOR significantly improves system performance and energy efficiency at low area cost.

0.55

Bridging LLM Serving and CXL-SSDs with Chunk-Aware KV Cache Management

cs.AR cs.AIcs.ET ·2026-09-20 ·Hyunsun Chung, Taewan Noh, Minji Kim, Joo-Young Hwang, Hong-Yeon Kim +1 more
similarity 0.66
Abstract · 12 pages, 17 figures

NAND-backed storage offers the capacity needed to scale LLM prefix caching, but its block I/O path incurs CPU cache contention and host-DRAM staging in addition to NAND latency. Our characterization shows that these interface costs persist even with DRAM as the storage medium, motivating CXL-SSDs for byte-addressable access to NAND-backed capacity. Surprisingly, however, a stock CXL-SSD remains about 3$\times$ slower than local DRAM and no faster than an NVMe SSD, while generic prefetching provides little benefit. We present LM-CXD, a CXL-SSD specialized for LLM prefix caching. LM-CXD bridges the semantic gap between the serving engine, which knows which KV chunks will be consumed, and the device, which controls their placement and movement. It makes KV chunks device-visible I/O units, exposes NAND-to-DRAM progress to the serving engine, and uses device DRAM as a GPU-accessible buffer. LM-CXD further coordinates request scheduling with windowed prefetching and pipelines layerwise KV movement with GPU computation to hide NAND latency under limited device DRAM. Across five LLM models, LM-CXD reduces average TTFT over a stock CXL-SSD by up to 2.6$\times$ with compute asynchronous prefetching and 4.03$\times$ with layerwise prefetching, achieving TTFT within 1.5$\times$ of local DRAM on average.

0.21

BOOST: Concurrent Access to Host Memory and HBM to Accelerate LLM Inference

cs.DC cs.ARcs.LG ·2026-09-11 ·Anish Saxena, Jae Hyung Ju, Hritvik Taneja, Po-An Tsai, Aamer Jaleel +2 more
similarity 0.66
Abstract · 15 pages, 22 Figures

GPU memory bandwidth and capacity limit throughput in large language model (LLM) inference. The GPU memory system consists of a primary tier of high-bandwidth memory (HBM) and a secondary tier of host memory connected via CPU-to-GPU interconnect. Current serving systems treat the tiers hierarchically: they serve exclusively from HBM when data fits, and otherwise prefetch data from host memory to HBM before use. In both cases, the host memory bandwidth is never well utilized. Prefetching expands capacity by utilizing host memory, but consumes HBM bandwidth for writes, reducing the bandwidth available for demand loads. We observe that fully utilizing both host and HBM bandwidth requires each wave of GPU threadblocks to access both tiers concurrently and in proportion to their bandwidth ratio. Existing bandwidth-proportional placement strategies fail to provide concurrency because they are not aware of GPU waves, and the large 2MB GPU page size. This paper presents BOOST, the first runtime system that provides concurrent and proportional access to both GPU memory tiers, extracting the combined bandwidth of host memory and HBM for LLM inference without kernel changes. The key insight in BOOST is to use kernel access patterns to make page allocation and runtime data management wave-aware. For static model weights, BOOST applies modulo-based page placement that eliminates access-ratio variance; for dynamically provisioned attention key-value (KV) pairs, it makes the free KV page pool wave-aware. We integrate BOOST into vLLM and evaluate on a Grace Hopper system. At iso-batch size, BOOST improves Time-per-Output-Token (TPOT) by 4.3% over HBM-only serving, whereas prefetching degrades TPOT by 6%. In high-throughput serving, BOOST improves throughput by 31% on average, outperforming prefetching by 15%.

0.24

SARIA: Persistence-Aware KV Caching with Coordinated DRAM--SSD Reload for LLM Agents

cs.OS ·2026-10-22 ·Hui Li, Qihui Zhou, Xiao Yan, Shumeng Zhang, Zijie Dai +5 more
similarity 0.66
Abstract · 12 pages, 16 figures

Multi-turn LLM agents usually reuse long context prefixes, making key value (KV) caching crucial for reducing prefill latency. SSDs provide a low-cost extension to limited DRAM capacity but introduce two key challenges. Eagerly persisting all KV cache blocks incurs substantial write traffic and rapidly consumes finite SSD endurance. Meanwhile, the small number of SSDs provisioned in typical GPU servers limits aggregate reload bandwidth, making SSD-resident KV cache much slower to retrieve than that in DRAM and inflating prefill latency. We present \textsc{Saria} (Selective Admission and Reload for Inference Acceleration), a KV caching system that jointly manages DRAM and SSD by exploiting the session-level temporal locality of LLM agents to reduce SSD writes and accelerate cache reload. On the write path, \textsc{Saria} uses eviction and reuse history to selectively persist KV cache blocks that exhibit reuse opportunities beyond their DRAM residency, avoiding unnecessary writes for KV cache already hosted in DRAM. On the read path, \textsc{Saria} promotes selected SSD-hit KV cache blocks from GPU memory into DRAM after prefill, allowing subsequent reuse within the same session to reduce SSD read traffic while limiting DRAM contention. A transfer coordinator paces DRAM reads while SSD transfers are active, allowing both paths to make progress and efficiently share GPU ingress bandwidth. We implement \textsc{Saria} on LMCache MP and evaluate it using workloads from TraceLab and WEKA, covering both full-attention and hybrid-attention models. The results show that \textsc{Saria} reduces SSD writes by 57.1--58.9\% compared with popular full duplicate caching and the mean time to first token (TTFT) by 42.3--79.7\% over DRAM-only caching.

0.08

FlatCake: A Flat KVCache Storage Architecture for LLM Serving

cs.DC cs.OS ·2026-10-28 ·Xin Huang, Teng Ma, Zhuoran Li, Yibo Zhao, Zhaoshi Li +5 more
similarity 0.65
Abstract · 10 figures

KV cache reuse accelerates LLM serving, but existing systems manage host DRAM and NVMe SSD as a tiered hierarchy where DRAM acts as an intermediate cache. Production LLM workloads break both premises of this hierarchy. First, bimodal reuse defeats DRAM temporal filtering, since workloads are dominated either by one-shot blocks with long reuse distances or by multi-gigabyte agentic sessions that exceed DRAM capacity, putting SSD on the critical read path. Second, DRAM staging and eviction-ordered layout bottleneck SSD restoration. Holding host staging buffers for in-flight prefixes causes contention under load that aborts prefetches, while incremental eviction scatters a session's blocks across the SSD and prevents large sequential reads. We present FlatCake, a flat KV storage architecture that exposes host DRAM and NVMe SSD as peer media in a unified 64-bit address space. Exploiting the fact that KV blocks are write-once, immutable, and reused at session scope, FlatCake places each block directly onto its target medium in session-contiguous, layer-major order at creation time and never migrates it. FlatCake streams coalesced SSD reads directly into a bounded GPU window via GPUDirect Storage and decouples DRAM and SSD request queues to prevent head-of-line blocking. On a production Claude Code trace with DeepSeek-V4-Flash, FlatCake sustains a 94% cache hit rate as load increases (versus 64% for Mooncake), eliminates Mooncake's $6.5\times$--$6.7\times$ SSD read amplification, and reduces peak-load mean TTFT by $1.6\times$ while improving total token throughput by $1.6\times$. Across 8K--128K contexts on Llama-3.1-70B, FlatCake further reduces mean TTFT by up to $2.4\times$ over Mooncake and $1.8\times$ over Mooncake-GDS.

0.13

HBFlex: A Flexible Memory System for Bridging Fine-Grained LLM States and Coarse-Grained HBF Parallel Execution

cs.AR ·2026-09-16 ·Shuzhang Zhong, Weikai Xu, Yifan Zhou, Tongbin Zhao, Tenghao Zhao +5 more
similarity 0.65
Abstract

Large language models (LLMs) require increasing memory capacity to accommodate growing model weights and KV caches. High-Bandwidth Flash (HBF) offers high memory density and aggregate read bandwidth through massive plane-level parallelism, making it an attractive option for LLM serving. However, serving LLMs entirely from HBF introduces three challenges: fine-grained KV reads create placement and access imbalance, incremental writes interfere with foreground reads, and mixed KV lifetimes amplify garbage collection. Hybrid HBM/HBF designs retain HBM to support dynamic KV management, but this allocation reduces the HBF resources available under a fixed packaging budget, limiting aggregate HBF bandwidth. We present HBFlex, a full-HBF memory system with coordinated optimizations for KV reads, writes, and reclamation. HBFlex balances KV placement and attention accesses to improve plane utilization. It aggregates incremental updates and schedules writeback within sufficiently long compute windows to reduce write--read interference. It also combines lifetime-guided block packing with deferred reclamation to reduce valid-page migration. We evaluate HBFlex through trace-driven simulation across different configurations. HBFlex achieves average throughput speedups of up to 1.58$\times$ over FlashAccel and 3.30$\times$ over H3, benefiting from higher HBF bandwidth and more efficient management of dynamic KV-cache reads, writes, and erases.

0.38

TileDRAM: Compiler-Controlled Tile-to-DRAM Layouts for 3D DRAM GPGPUs

cs.AR ·2026-10-16 ·Guangyuan Xu, Lanxuan Zhang, Ziyang Li, Zhaoshi Li, Yajun Ha
similarity 0.65
Abstract

Modern GPU compilers expose rich layout abstractions for mapping tensors to threads and on-chip resources, but compute-unit-local (CU-local) 3D DRAM architectures lack a corresponding abstraction for specifying how operand-tile data are arranged within the DRAM address space. Without such an abstraction, conventional placement under the existing DRAM address mapping can subject structured tile accesses to severe row-buffer conflicts. We present TileDRAM, a compiler-runtime toolchain that introduces tile-to-DRAM layouts as a compiler-visible abstraction for DRAM placement. TileDRAM extends the GPU Linear Layout abstraction from compute-side mapping targets to DRAM placement coordinates and selects layouts per tile access signature, using recurring tile-local access behavior as the specialization unit. Since row-buffer locality depends on ordered request history, TileDRAM evaluates candidate layouts through their row-buffer behavior under fixed DRAM address mappings. Accesses under the selected layouts are realized through ordinary address arithmetic, without new address-remapping hardware or ISA support. In full-trace replay on Accel-Sim/Ramulator2 across 108 mixture-of-experts (MoE) feed-forward network (FFN) cases, TileDRAM reduces the request-weighted row-conflict rate from 75.7% to 15.2% and achieves a 1.77x geomean speedup. Retargeting six traces to six 3D DRAM organizations yields a 2.20x geomean speedup under the same compiler abstraction. On an RTX 3090, address transformation adds 0.17% geomean overhead over identity.

0.15